Grecon pirkti naudotą (29)

Sąlyga: geras (naudotas), Gamybos metai: 1998, GreCon Dimter OPTICUT 204 R Optimizing Cross-Cut Saw – Year of manufacture: 1998 – Full optimization system – Mark-to-cut operation – Width measurement feature – Capability to cut aluminum TECHNICAL PARAMETERS: – Maximum cutting length: 4000 mm – Minimum element length: 200 mm – Maximum cutting height: 100 mm Tsdpfx Aeh Hfknefwjf – Maximum cutting width: 260 mm – Saw blade diameter: 500 mm – Motor power: 9 kW – Maximum feed speed: 160 m/min – Acceleration: 2 m/s² – Optimization based on length and value – Pneumatic material hold-down – Three ejectors – Discharge tables – Rotary table – Total length: 2000 cm Transport dimensions: – Length: 1300 cm – Width: 245 cm – Height: 220 cm – Weight: 3500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Medienos jungimo mikrodantukais linija Grecon ProfiJoint Gamybos metai: 2014 Techninė būklė: labai gera Techniniai duomenys: Galutinio elemento ilgis: 2100 mm Už papildomą mokestį siūlome montavimą, paleidimą bei operatorių apmokymą. Taip pat teikiame nuolatinį aptarnavimą. Tjdpjxyq Nmjfx Afwsf

Sąlyga: naudotas, Gamybos metai: 2001, High-performance optimizing cross-cut saw GRECON DIMTER OptiCut S75-4 with defect detection. This machine is ideally suited for precise cutting of solid wood, featuring automatic detection and removal of wood defects. Todewtgcxjpfx Afwef Technical data: Model: OptiCut S75-4 Manufacturer: GreCon Dimter Year of manufacture: 2001 Commission number: 0682-10 Mains voltage: 400 V / 50 Hz Control voltage: 230 VAC / 24 VDC Rated power: 11 kW Fuse protection: 25 A Condition: used

Sąlyga: geras (naudotas), Gamybos metai: 1992, I am selling an automatic pneumatic crosscut saw GreCon Dimter 2004, year of manufacture 1992. Tsdpfx Afst Ir Nqswjf Automatic infeed table / throughfeed system Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Optimization with automatic defect detection and automatic cutting pattern programming. Immediately available. Spare parts and documentation included.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 13 000 mm, padavimo eiga Y ašimi: 240 mm, padavimo ilgis Z ašis: 100 mm, X ašies padavimo greitis: 25 m/min, spaudimo jėga: 40 t, įėjimo įtampa: 400 V, bendras aukštis: 1 120 mm, darbinio aukščio: 1 120 mm, frezos veleno ilgis: 330 mm, valdymo įtampa: 400 V, ruošinio aukštis (maks.): 100 mm, įrankio skersmuo: 240 mm, sukimosi greitis (maks.): 6 000 aps./min, oro slėgis: 7 juosta, obtotalinė obliavimo stalų ilgis: 13 000 mm, Turime pasiūlyti pilnai automatizuotą konstrukcinės medienos KVH gamybos liniją. Ji turi visus CE sertifikatus ir Poznanės Medžio Technologijos Instituto sertifikatą. Atitinka ENPN 14.081 ir 14.081 standartus. 1. Įstrižinis iškrovimo transporteris 2. Pakrovimo stalas vizualinei medienos klasifikacijai 3. Buferis prieš defektų pjovimo įrenginį 4. Automatinis defektų išpjovėjas su fluorescencinės kreidos kamera 5. Buferis prieš dygiuotės mašiną 6. Dygiuotės mašina su klijų užteptuvu ir pjūklu pjauti iki 13 m ilgio ruošinius 7. Grandininis sandėliavimo transporterinis konvejeris nuo klijavimo mašinos iki keturpusės obliavimo staklės 8. Automatinis padavėjas keturpusei obliavimo staklei 9. Keturpusė obliavimo staklė Winter 6-33 10. Volelinis atsiėmėjas nuo keturpusės obliavimo staklės 11. Automatinis obliuotos medienos pakavimo įrenginys Tsdpexfzyyofx Afwjf 12. Grandininis padavėjas 13. Klijuotų ruošinių stiprumo matuoklis

Sąlyga: geras (naudotas), Type FEr LD 180/600/1000 Todpfx Afouhtmiewef 100% functional, automatic rotation

Sąlyga: paruoštas naudoti (naudotas), - Paketinė špuntuojimo linija - Medienos ilgis... 800-5400 mm - Medienos plotis..... 70 - 255 mm - Medienos storis..... 22 - 100 mm - Medienos galutinė ilgis ....neribojama - Spaudimo jėga 12 t Pasirinktinai presas 30 t - Sudėtis: - Dviguba ritininė transporterio linija - Skersinio pjovimo automatas su ruošinio atpažinimu 15 KW - Paketavimas - Centrinis frezavimo automatas 80 KW Tjdpjbqqzgjfx Afwef - Atskyrimo skersinis transporteris - Volelių stalas - Hidraulinė periodinė spaudykla 20 KW - Ilginio pjovimo pjūklas 5 KW - Elektros spinta su Siemens S5 valdymu, 1996 m. OPCIJOS labai dideliems medžio skerspjūviams: 01–Presas su 30 t spaudimo jėga 02–Skersinio pjovimo automatas DIMTER – XXL ruošinio atpažinimas 23 kW

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Grecon Ultra Finger Jointing Line - German-made - Year of manufacture: 2001 - For softwood and hardwood - Documentation (DTR) included TECHNICAL SPECIFICATIONS: Element length min/max: 150/1000 mm Element width min/max: 40/205 mm Todporf Ty Sefx Afwof Height min/max: 20/80 mm Minimum length to maximum width ratio: 2:1 Initial length min/max: 3000/6100 mm Saw motor power: 5.5 kW Saw spindle diameter: 30 mm Moulder motor power: 22 kW Spindle diameter: 50 mm Total length: 11,500 mm Width: 5,300 mm Total power consumption: 39 kW Air pressure: 8 bar Air consumption: 660 NL/min Extraction connector diameter: 250 and 100 mm Extraction requirement: 6,150 m³/h at 30 m/s Transport dimensions: 13,00 m x 2,20 m x 2,00 m Weight: 6,700 kg

Sąlyga: paruoštas naudoti (naudotas),

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Grecon Combipact finger jointing line, year of manufacture 2009, is an advanced system used in the woodworking industry, primarily for joining short wood sections into longer components using finger joint connections. This process enables the utilization of wood waste for the production of high-quality construction elements, such as beams, scantlings, or panels. Tjdpfx Afeuiz I Rewsf Technical data: 1. Initial workpiece length: - Minimum length: 150 mm - Maximum length: 1000 mm 2. Workpiece width: - Minimum width: approx. 20-40 mm - Maximum width: approx. 200 mm 3. Workpiece thickness: - Minimum thickness: approx. 15-20 mm - Maximum thickness: approx. 80 mm 4. Final length after jointing: - Standard maximum length after jointing: from 6000 mm 5. Output capacity: - Production capacity is typically from 5 to 15 joints per minute, allowing processing of up to 3000 linear meters/hour. 6. Type of joint: - Finger joints executed with high precision to ensure durable and strong connections. 7. Pressing force: - Typically, a hydraulic press applies a pressure from a few to several tons to effectively join the elements. 8. Control system: - PLC control system enabling automated process with parameter settings for various jointing requirements. 9. Gluing system: - Grecon Combipact lines are equipped with automated gluing systems that accurately dispense the correct amount of adhesive. 10. Power supply: - Standard supply: 400 V, 50 Hz

Sąlyga: labai geros būklės (naudotas), Medienos sujungimo linija Grecon Profijoint Tjdsw Ilryopfx Afwef Grecon Profijoint Įeinančios medžiagos ilgis: 150–700 mm Medžiagos plotis: 40–150 mm Medienos storis: 18–50 mm Vienkartinė nupjovimo staklė Galimybė frezuoti pagal liniją Frezuotuvo veleno galia: 15 kW Smulkinimo/pjovimo veleno galia: 11 kW CE sertifikatas

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 450 mm, pjovimo aukštis (maks.): 80 mm, pjovimo plotis (maks.): 150 mm, pjūklo pavara: 5 500 W, galia: 5,5 kW (7,48 AG), bendras aukštis: 2 000 mm, bendras ilgis: 20 000 mm, servo variklio galia: 5 500 W, bendras plotis: 2 000 mm, įvesties srovės tipas: trifazis, ištraukimo jungties skersmuo: 140 mm, suslėgto oro jungtis: 3,5 juosta, bendras svoris: 2 500 kg, Optimizuota skersinio pjovimo sistema GreCon tipo 1004 su įvado skersiniu konvejeriu su išvado konvejeriu su 10 išmetėjų su grandine Techninė specifikacija: Maks. ruošinio plotis: 250 mm Maks. ruošinio storis: 80 mm Pjūklo disko skersmuo: 450 mm Todpfxswy Np Uj Afwjf Pjovimo greitis: 90 m/sek. Pjūklo variklis: 5,5 kW Pjūklo veleno valdymas: pneumatinis Grandinės pavara: servo variklis Min. darbinis plotis: 40 mm Min. įvado ilgis: 500 mm Grynoji masė: apie 2500 kg Kreidos atpažinimas SICK LUT kamera kokybės ir ilgio atpažinimas bei rūšiavimo stotis

Sąlyga: naujas, Gamybos metai: 2023, Order comb, tine shape 15 mm Order combs, tine shape 20 mm Finger joint profile Adhesive application comb Glue application comb Glue comb Tedpfxjiacbpj Afwef Glue combs >> Delivery time ex stock

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Workpiece dimensions: 150-1000x50-205x35-50 mm, output length: 3000-6000 mm, connected load: 80 kW, length: 15,480 mm, width: 5,500 mm, height: 2,000 mm, weight: 10.5 t, including documentation. Tjdpfx Afoign Efswsf

Sąlyga: paruoštas naudoti (naudotas),

Sąlyga: labai geros būklės (naudotas), veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Automatic Finger Jointing Line Grecon Dimter Ultra Machine after comprehensive overhaul. Specification: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Arbor diameter: Ø50 mm - Usable arbor length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Milling motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feed Table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Infinitely adjustable Dust Extraction: Chipper extraction duct diameter: Ø100 mm Milling head extraction duct diameter: Ø150 mm Dust extraction capacity (flow rate): ~2,400 m³/h Pneumatic System: Operating pressure: 6 bar Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6,000 +15-50 mm - Pressing force: 3 – 7.5 T (3,000 – 7,500 daN) Circular Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Extraction: - Saw extraction duct diameter: Ø100 mm - Extraction capacity (flow): ~400 m³/h Pneumatic System: - Operating pressure: 6 bar - Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Works: 1. Cleaning machine bodies and application of new paint 2. Replacement of bearings with new ones: main spindle of the tenoner; saw unit spindle of the press; linear bearings on the carriage table guide of the tenoner; bearings on the working conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm spacing on the tenoner body, assembly of a glue tank with a safety valve. 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic tubes for actuators, solenoid valves and other pneumatic components 7. Replacement of gears and duplex chain on the press’s chain/belt feeder 8. Overhaul of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators; replacement of worn solenoid valves with new ones 10. Replacement of graphic operator panels on the tenoner control cabinet, on the press control cabinet, and on the small press panel 11. Replacement of buttons, indicator lights, and switches on operator panels and control boxes; replacement of terminal boxes 12. Replacement of controllers overseeing the operation of the tenoner and press with new ones and adaptation of the machine’s control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the push bar of the outfeed table 14. Servicing of electrical installations in control cabinets, modernization and preparation of updated wiring diagram Tjdeuddvaspfx Afwsf 15. Installation of guards, meshes, and necessary descriptions, labels, safety signs, manufacturer logo, and nameplates 16. Replacement of V-belts with new ones, inspection of pulleys, geared motors, and electric motors 17. Replacement of limit switches, inductive and optical sensors (photo sensors) We specialize in finger jointing machines. Installation, commissioning and operator training within Poland included in price; in other countries, for an additional fee. Service and spare parts support provided.

Sąlyga: naudotas, Gamybos metai: 2004, Kompaktiška pusiau automatinė dantytų jungčių linija, sudaryta iš: - Frezaus PJ 150/500 - Perdavimų stalo rankiniam perdavimui - Vieno kanalo preso PJ 7/6100 li Frezaus: 2 pakeliai/min Presas: 2 ciklai/min Tjdpfx Aew Nbacofwef Įeinantis ilgis: 150–700 mm Galutinis ilgis: maks. 6 100 mm

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm Tedou Atmuopfx Afwjf - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: beveik kaip naujas (naudotas), Spare Parts & Accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kupfermühle Rex Cook Bolinders Dimter GreCon Just ask for details. Tsdpolifbdsfx Afwof

Sąlyga: naudotas, Gamybos metai: 2004, WEINIG GRECON FINGER JOINT LINE DOUBLE END MODEL PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm - Pressing force: 120 kN Tsdpfx Aswry I Eefwsf - Milling motor: 15 kW - Scoring unit: 5.5 kW - Year: 2004 CE

Sąlyga: geras (naudotas), Grecon finger jointing line Infeed cross buffer with package formation 2 milling units linked, 600 mm table width each milling unit with glue rollers - automatic handover - continuous throughfeed press Tedpjh I Dufsfx Afwjf - cross-cut saw - outfeed roller conveyor with transverse pusher Workpiece lengths: 500 - 4000 mm The machine is dismantled and available at short notice. Control system is defective – a new control with software is included, but not installed and the program has not been tested.

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Maße Breite: 6.500 mm Maße Tiefe: 18.500 mm Maße Höhe: 2.000 mm Maschinengewicht: 10.500 kg Zusätzliche Ausstattung Presse (Stirnpresse): Pressdruck 6 - 12 t und Anschlussleistung 52 kW Druckluftverbrauch: 350 NL/min für Fräsmaschine, 500 NL/min für Presse Absaugvolumen: 10.600 m³/h Die Maschine ermöglicht schnelle Transportzyklen mit präziser Ausrichtung Inklusive hydraulischer Pressanlage für kontinuierliches Verleimen Mit integrierter Staubabsaugung und Absaugsystemen Diese Grecon Dimter FDL-F 205/600/500 wurde 1997 hergestellt. Sie ist für Anwendungen in der Holzverarbeitung konzipiert und bietet eine robuste Leistung und hohe Zuverlässigkeit. Ideal für die effiziente Bearbeitung verschiedenster Holzverarbeitungsaufgaben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Todov Utpcopfx Afwjf Anwendungstypen Sonstige Holzbearbeitungsmaschinen

Sąlyga: paruoštas naudoti (naudotas), Application of adhesive using profile rollers GRECON adhesive application 10 - 15 - 20 mm Todolxx Dqspfx Afwef

Gamybos metai: 2008, Sąlyga: naudotas, FINGER JOINTING LINE GRECON PROFI JOINT MOD. PJ 10/6100 – USED - Workpiece dimensions: * Minimum width: 40 mm, maximum width: 150 mm * Minimum thickness: 18 mm, maximum thickness: 50 mm * Minimum length: 150 mm, maximum length: 700 mm COMPRISED OF: * MOULDER - No. 2 scoring saws, diameter 200 mm (11 kW) - Chip breaker, diameter 250 mm (7.5 kW) - Cutterhead group, diameter 250 mm (22 kW) * PRESS - Minimum length: 3,000 mm, maximum length: 6,100 mm - Hydraulic power unit: 4.4 kW - Cut-off saw motor: 2.2 kW - Year of manufacture: 2008 - Voltage: 400/50 Hz - Installation footprint: 13,000 x 5,000 x 2,100 mm (LxWxH) Tsdpfx Afopbbnxjwjf - Total weight: 5,800 kg

Sąlyga: naudotas, Frezavimo velenas Frezavimo velenai dantytoms frezoms Pleištinių dantukų frezavimo staklės įvairūs ilgiai įvairūs modeliai sandėlyje www jöma shop Gamintojai: GreCon + Sauter + DIMTER Todpfx Afoqwgrpewef