Reishauer Pavarų Honavimo Staklės pirkti naudotą (58 232)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Metzingen
1 242 km
Pavarų honavimo staklės
FÄSSLERD - 250 / H5
Skambinti
Būklė: naudotas, Gamybos metai: 1983, Workpiece diameter: 250 mm
Centre distance: 0 mm
Max. honing length: mm
Max. module: 5
FÄSSLER (Switzerland)
Conventional gear honing machine
Model D-250, Year of manufacture: 1983, Serial No. 31 205.049.22
_____
Gear diameter: 10 - 250 mm
Module: 1 - 5
Gear length / table stroke max.: 500 mm
Centre height of tailstocks: 220 mm
Max. workpiece weight: 50/100 kg
Swiveling range of the honing head: +/- 35°
Honing tool speeds: 20 - 500 rpm
Honing tool size / width: 300 / 40 mm
Workpiece speeds: 500 - 3,000 rpm
Total cross slide travel: 270 mm
Rapid cross slide traverse: 50 mm
Mechanical infeed of cross slide: 1 - 8 mm/Ø
Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec.
Hydraulic table speed: 0 - 6 m/min
Ppjdpot Hwzpofx Ahgju
Total drive power: 5.5 kW - 380 V - 50 Hz
Weight: 3,200 kg
Accessories / special equipment:
- Pre-settable machining parameters via counters and control devices for automatic operation, with workpiece counter
- All roughing and finishing infeeds are set via decade switches; table reversing times and rapid feed times can be adjusted via potentiometer (1 s = 0.04 mm)
- Ampere meter, etc.
- Possibility for crowning and taper honing via templates, possible off-centre as well (workpiece must be pre-machined accordingly)
- Separate honing oil unit with magnetic separator and fine filter
- Mechanical tailstocks for manual loading, oil mist separator
- Sliding doors with foot switch, separate hydraulic system
Mažas skelbimas
Metzingen
1 242 km
Pavarų honavimo staklės
REISHAUERRZR
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Workpiece diameter: 240 mm
Centre distance: 0 mm
Maximum honing length: 500 mm
Maximum module: 5
Ppjdpfst Hwvmox Ahgju
Total power requirement: 12 kW
Machine weight approx.: 5,000 kg
Required floor space approx.: [missing]
R E I S H A U E R (Switzerland)
CNC-Controlled Gear Honing Machine
Model: RZR, Year: 1996 # 74 105
_____
Wheel diameter min./max.: 10 - 240 mm
Module: 0.5 - 5
Helix angle: +/- 30°
Workpiece slide stroke (Z-axis): 275 mm
Honing tool traverse stroke (X-axis): 128 mm
X-axis infeed: 0.001 mm/stroke
Crowning approx.: 0.5°
Workpiece clamping length approx.: 500 mm
Max. workpiece oscillation approx.: 3,000 mm
Honing tool external/internal diameter x width: 325/308 x 45 mm
Honing tool rotational speed: 100 - 1,200 rpm
Honing tool dressing speed: 30 - 1,000 rpm
Spindle drive: 4 kW
Total drive approx.: 12 kW - 400 V - 50 Hz
Total weight approx.: 5,000 kg
Accessories / Special equipment:
- SIEMENS CNC path control type 810 G allows input of all relevant gear data and dialog-based workpiece setup with the controller. With DNC interface RS 232 for data input and output.
- A-axis = swiveling/helix adjustment, Z-axis = table movement, X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment.
- Equipped with attached automatic device for threading the honing wheel into the tooth gap.
- The tool swivel angle (A-axis) is also electrically positioned, fast and precise, and hydraulically clamped, resulting in reduced set-up times.
- Hydraulic workpiece clamping via footswitch between the workpiece spindle headstock and tailstock, both units movable on the workpiece table depending on the workpiece.
- Complete working area enclosure with sliding doors and safety interlock.
- Extensive original REISHAUER honing oil processing system type RTO 40.10, with centrifuge and cooling unit for constant honing oil temperature, oil mist filter, etc.
- Various diamond dressing tools mounted on arbors.
- Separate ventilated and cooled electrical/control cabinet, separate hydraulic unit.
Mažas skelbimas
Vokietija
1 131 km
Pavarų honavimo staklės
GLEASON-HURTHZHF 150
Būklė: naudotas, Gamybos metai: 2005, Technical Details:
Workpiece diameter: 63.5 mm
Centre distance: 350 mm
Max. honing length: mm
Total power requirement: kW
Machine weight approx.: 6 t
Required floor space approx.: 2.70 x 2.30 x 2.60 m
Technical Data G0504
Pjdpfxswrh H No Ahgjpu
Working Area
Clamping surface length mm 1550
Number of T-slots mm 2
Width of T-slots mm 18
Distance between T-slots mm 180
Centre height (tailstocks) mm 350
Swivel range of fine gear head (U axis) deg +30/-30
Axis distance - Tailstock/fine gear min./max. mm 120/225
Input increment (all NC axes) mm/deg 0.001
Slide
Travel range (= Z-axis travel) mm 105
Input increment mm
Tool
External diameter min./max. mm 225/275
Bore diameter mm 160
Width mm 60
Workpiece
External diameter min./max. mm 40-150
Module min./max. mm 1.25-4.0
Gear width max. mm 45
Weight
Machine weight approx. kg 5500
Operating Media Requirement
Coolant recommendation, see Chapter 8
Hydraulic fluid HLP D 46 approx. liters 100
Speeds and Feeds
Tool speed (infinitely variable) max. rpm 2000
Feed rates
Rapid traverse/feed Z direction up to m/min 2
X direction up to m/min 2
U direction up to m/min 2
V direction up to m/min 2
C3 direction max. deg/sec 12
Electrical Equipment
Operating voltage V 400
Control voltage/Lighting voltage V DC/AC 24/230
Frequency Hz 50
Power requirement approx. kVA 27
If the electrical installation is to be executed according to the customer’s specification, only the information in the electrical documentation is valid.
Motor Data
Servo drives: Nm / rpm
Tool drive C1 27.0 3000
Workpiece drive C2 27.0 3000
X-axis 20.0 3000
Z-axis 20.0 3000
U-axis 6.0 3000
Portal vertical (V1-axis) 6.0 3000
Portal horizontal (U1-axis)
Gripper rotation axis C3 5.0 3000
Loading slide (X1-axis) 5.0 3000
Three-phase motors: kW / rpm
Hydraulic motor 1.5 1410
Central lubrication 0.07 2700
Coolant pump 4 2840
Hydraulic Equipment
Delivery rate L/min 21
System pressure bar 50
Clamping pressure for: Headstock max. bar 35
Clamping tailstock min./max. bar 20
Available only when required. Not all maximum values can necessarily be achieved simultaneously.
If several maximum values are reached simultaneously during a machining operation, performance limitations must be expected!
Modifications to the specified designs, dimensions, and weights reserved.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Hövelhof
1 069 km
Pavarų honavimo staklės
National BroachGHC 12“
Skambinti
Gamybos metai: 1981, būklė: geras (naudotas), Manufacturer: National Broach
Model: GHC 12"
Year of manufacture: 1981
Max. workpiece diameter: 355 mm
Min./max. pitch circle diameter: 100–152 mm
Max. face width: 63.5 mm
Min./max. module: 1.25–6.35 mm
Weight: 3.4 t
Operation: Internal gear honing
Podpfx Ashad Avshgepu
Mažas skelbimas
Bydgoszcz
449 km
Honavimo staklė
VEB Auer WerkzeugbauSZS 200x1000 C
Skambinti
Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Vertikali honavimo staklės WMW VEB SZS 200x1000 C – darbinės būklės, prijungtos prie tinklo
Parduodamos garsaus Vokietijos gamintojo VEB Werkzeugmaschinenkombinat vertikalios honavimo staklės, modelis SZS 200x1000 C.
Staklės yra geros techninės būklės, tačiau šiuo metu nėra prijungtos prie elektros tinklo. Puikiai tinka tiksliam cilindrinių angų apdirbimui.
Podpfoyy N Drex Ahgepu
Būklė ir prieinamumas
Būklė: naudota, neprijungta prie elektros
Prieinamumas: galima įsigyti iš karto
Techniniai duomenys
Didžiausias honavimo ilgis: 1000 mm
Didžiausias honavimo skersmuo: 200 mm
Papildoma informacija
Galima įrenginio demonstracija vietoje arba nuotoliniu būdu
Pagalba organizuojant transportą
Mažas skelbimas
Siedlce
352 km
Pavarų gręžimo staklės su automatiniu padavimu
CORMAKZS-40B
Skambinti
Būklė: naujas, Gamybos metai: 2026, Pramoninis stulpinis gręžtuvas CORMAK ZS-40B – tai techniškai pažangus įrenginys, skirtas intensyviam metalo apdirbimui dirbtuvėse ir gamybinėse sąlygose. Dėl tikslios alyvos pavaros, automatinio vertikalaus pastūmos ir sriegimo funkcijos, stulpinis gręžtuvas CORMAK ZS-40B užtikrina patikimumą, efektyvumą ir aukštą angų bei sriegių apdirbimo kokybę.
Pagrindiniai įrenginio privalumai
- Automatinė vertikali pastūma – trys diapazonai (0,12; 0,18; 0,25 mm/aps.) leidžia optimaliai pritaikyti medžiagos pjovimo parametrus pagal apdirbamą medžiagą.
- Sriegimo funkcija su automatiniu sukimosi krypties keitimu – leidžia efektyviai formuoti vidinius sriegius iki M32 be operatoriaus įsikišimo.
- Alyvinė pavara su grūdintais ir šlifuotais krumpliaračiais – užtikrina tylų, tolygų darbą ir variklio ilgaamžiškumą.
- Tvirta 115 mm skersmens kolona – minimizuoja išlinkimą ir vibracijas, kas įtakoja apdirbimo tikslumą.
- Didelis pasukamas darbinis stalas su aukščio reguliavimu – leidžia apdirbti dideles ar netaisyklingos formos detales.
- Standartinė aušinimo sistema – pagerina gręžimo kokybę, prailgina įrankių tarnavimo laiką ir sumažina perkaitimo riziką.
Konstrukcija ir technologija
Pramoninis gręžtuvas CORMAK ZS-40B sukurtas nenutrūkstamam darbui sudėtingomis gamybinėmis sąlygomis. Įrenginio pagrindas – mechaninė pavara, tepama alyvos vonelėje, užtikrinanti stabilų ir patikimą varomąjį mechanizmą. MK4 tvirtinimo velenas leidžia naudoti platų įrankių asortimentą, o didelis veleno ir kolonos mazgo standumas prisideda prie tikslumo apdirbant angas. Skaidrios plexiglass apsauga užtikrina operatoriaus saugą, išlaikant gerą apdirbimo zonos matomumą.
Tikslumas ir našumas
Automatinė pastūma leidžia vykdyti pakartotines gręžimo operacijas nevarginant operatoriaus, kas ypač pagerina našumą serijinėje gamyboje. Veleno greičio intervalas – nuo 95 iki 1600 aps./min., derinant su šešiais pavaros lygiais, leidžia optimaliai parinkti apdirbimo parametrus priklausomai nuo medžiagos ar įrankio. Tikslus rankinis ratukas su gylio skale užtikrina visišką gręžimo proceso kontrolę.
Ppjdpfxsridv So Ahgeu
Pritaikymo sritys
Sriegimo funkciją turintis gręžtuvas CORMAK ZS-40B idealiai tinka:
- gamybos ir surinkimo įmonėms,
- mechaninėms ir šaltkalvių dirbtuvėms,
- techninio aptarnavimo padaliniams,
- įrankių dirbtuvėms ir mokymo centrams.
Standartinė komplektacija
- 16 mm grąžtų griebtuvas
- MK4 griebtuvo kotas
- Redukcinės movos MK3 ir MK2
- Koto išmušimo pleištas
- Darbinis stalas su tvirtinimo grioveliais
- Rankinis ratukas su gylio skale
- Aušinimo sistema su pompa
- Veleno apsauga iš plexiglass
- Rankinis ratukas su skale
Techniniai duomenys
Maks. gręžimo diametras: 40 mm
Maks. sriegio diametras: M32
Veleno kūgis: MK4
Kolonos diametras: 115 mm
Atstumas nuo veleno iki kolonos ašies: 260 mm
Atstumas nuo veleno iki darbinio stalo (maks.): 754 mm
Atstumas nuo veleno iki pagrindo (maks.): 1270 mm
Veleno apsukų diapazonas: 95 – 1600 aps./min.
Pavarų skaičius: 6
Automatinės pastūmos diapazonas: 0,12 / 0,18 / 0,25 mm/aps.
Darbinio stalo matmenys: 354 × 575 mm
Bendras aukštis: 2120 mm
Variklio galia: 1,1 kW (S1) / 1,6 kW (S6)
Maitinimas: 400 V / 50 Hz
Svoris: 410 kg
Mažas skelbimas
Trittau
890 km
Honavimo staklės - Interjeras - Vertikalios
NAGEL3VS8-50T
Skambinti
Būklė: naudotas, Gamybos metai: 2005, Honavimo įrenginio tipas
Valdymas: Nagel
Psdpfx Ahoxwdxisgopu
Mūsų nuomone, įrenginys yra geros naudotos būklės ir gali būti apžiūrėtas prijungtas prie elektros tinklo, susitarus dėl termino.
Yra 2 įrenginiai.
Priedai, paveikslėliuose matomi įrankiai ir tvirtinimo priemonės į pristatymo apimtį įtraukiami tik tada, jei tai nurodyta papildomoje informacijoje.
Techninių duomenų ir informacijos pakeitimai bei klaidos, taip pat tarp pardavimas – pasiliekame teisę!
Mažas skelbimas
Beringen
1 344 km
Honavimo staklė
SUNNENMBB 1690 G
Skambinti
Būklė: labai geros būklės (naudotas), Horizontalus
Rankinis
su automatiniu padavimu
Honavimo ilgis - 406 mm
Honavimo skersmuo 1,5 - 165 mm
Veleno apsukos 200-2500 aps./min.
Įvairūs priedai
Psdpfx Aezhl Tvshgopu
MARCELS MASCHINEN AG
Mažas skelbimas
Vokietija
999 km
CNC pavarų šlifavimo staklės
ReishauerRZ 301 S
Skambinti
Gamybos metai: 1992, būklė: paruoštas naudoti (naudotas), Krumplyno skersmens diapazonas: 10 mm – 330 mm, krumpliaračio plotis: 180 mm, didž. modulis: 7, min. modulis: 0,5 mm, įtvirtinimo ilgis: 420 mm, dantų skaičiaus diapazonas: 10–600, pasvirimo kampas: +/-45°, apsisukimų dažnis: 1900 aps./min, šlifavimo disko skersmens diapazonas: 280 mm – 350 mm, šlifavimo disko pločio diapazonas: 84 mm – 104 mm. Staklių matmenys X/Y/Z: apie 4500 mm / 6000 mm / 2300 mm, svoris: apie 5100 kg, valdymas: Fanuc Series 160i-T. Dokumentacija yra. Galima apžiūra vietoje.
Ppedpfjzg Iq Ijx Ahgsu
Mažas skelbimas
Karlsbad
1 256 km
Honavimo staklė
SunnenSV -1005
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Vertikali kryžminė šlifavimo staklė
Padėties keitimo stalas
Ppedsyhl Aljpfx Ahgou
280 litrų šlifavimo alyvos bakas su magnetiniu separatoriumi ir filtru
Pirkti dabar
Słupsk
446 km
Honavimo staklė
DELAPENAE4450S
Būklė: naudotas, Gamybos metai: 2023, mašinos/transporto priemonės numeris: 855-23-01, veleno greitis (min.): 10 aps./min, veleno greitis (maks.): 250 aps./min, bendras aukštis: 1 600 mm, bendras plotis: 2 500 mm, bendras ilgis: 11 000 mm, bendras svoris: 4 000 kg, sukimosi greitis (min.): 416 aps./min, sukimosi greitis (maks.): 250 aps./min, Mašinos duomenys
Montavimo matmenys: apie 10000 × 2500 × 1600 mm
Svoris: apie 3000 kg
Talpa
Maks. išorinis skersmuo: 650 mm
Maks. eiga / pervažiavimo kelias: 4500 mm
Maks. honavimo ilgis: 4000 mm
Našumo duomenys
Sukimosi greitis: 10–250 aps./min.
Pagrindinės pavaros galia (sukimasis): 4 kW
Eigos greitis: 1–25 m/min
Eigos pavaros galia: 3 kW
Pneumatiniai duomenys
Minimalus oro slėgis: 5 bar
Maksimalus oro slėgis: 9 bar
Sistema: pneumatinio padavimo įrenginys (automatinė trinties kontrolė)
Valdymas / Technika
HMI: SIMATIC HMI
Techniniai duomenys
Įtampa: 400 VAC
Valdymo įtampa: 24 VDC
Ppedpfxsy H I Ipo Ahgeu
Dažnis: 50 Hz
Prisijungimo srovė: 63 A
Atitiktis: CE
Aušinimo sistema
Rezervuaro talpa: 1000 l su filtravimo įrenginiu
Svoris
Grynasis svoris: apie 3500 kg
Bruto svoris: apie 4000 kg
Transporto matmenys
Matmenys: apie 11000 × 1000 × 2100 mm
Mažas skelbimas
Metzingen
1 242 km
Honavimo staklės - Interjeras - Vertikalios
KADIAVZH 90/450 F
Skambinti
Būklė: naudotas, Gamybos metai: 1998, Bore diameter: 90 mm
Stroke: 490 mm
Pedpfet Hw T Sex Ahgepu
Throat depth: 400 mm
Total connected load: 10 kW
Machine weight approx. 3,500 kg
Space requirement approx. m
KADIA
Vertical Honing Machine
Model: VZH 90 / 450 F
Year of manufacture: 1998 Serial no.: 50 / 1790
_____
Max. honing diameter: 10 - 90 mm
Max. honing depth: 30 - 450 mm
Max. spindle stroke: 490 mm
Spindle throat: 400 mm
Mounting height under spindle nose top approx.: 1,200 mm
Table size approx.: 400 x 600 mm
Max. workpiece diameter approx.: 700 mm
Spindle speeds, infinitely variable: 160 – 830 rpm
Stroke speed, infinitely variable: 25 mm/min
Spindle drive: 4.5 kW
Total drive: 10 kW - 400 V - 50 Hz
Weight approx.: 3,500 kg
Overall machine height approx.: 4,000 / 3,300 mm
Accessories / Special equipment:
• Machine equipped with SIEMENS S5 / Unipos 4.0 PLC for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, fault messages, etc.
• With a fixed table 600 x 400 mm
• Automatic shut-off after a preset time, followed by spindle return
• Automatic motorized expansion of the honing tool via electromechanical feed head ESZ 90/1 D
• Separate hydraulic unit, central lubrication, workpiece clamping device on the table
• Currently no suitable coolant system, no honing tools included.
Condition: good to very good - ready for demonstration
Delivery: ex stock - as inspected here
Payment: strictly net - upon receipt of invoice
Mažas skelbimas
Metzingen
1 242 km
Pavarų formavimo staklės
LORENZLS 400
Skambinti
Būklė: naudotas, Gamybos metai: 1973, Maximum wheel diameter: 400 mm
Wheel width: 75 mm
Total power requirement: 25 kW
Machine weight: approx. 7,000 kg
LORENZ
High-performance gear shaping machine
Model: LS 400
Year of manufacture: 1973 S/N: 11 884
_____
Max. external wheel diameter: 400 mm* (potentially larger)
Max. internal gearing diameter: approx. 350 mm
Max. wheel width: 75 mm
Module range: 0.5 – 6
Stroke length: approx. 82 mm
Adjustable stroke position: 0 – 80 mm
Ram clearance (ram spindle / machine body): 250 mm
Spindle taper: approx. MT5
Strokes (roughing/finishing): 118 – 1,000 rpm
Table size: 400 mm
Table bore: 125 mm
Installation height between table and shaping head:
min./max.: approx. 280/350 mm
Fixed ram clearance: 250 mm
Axial table travel: approx. 295 mm
Approximate number of teeth: 12 – 150/300
Feed range
Tooth depth: 0.01 – 0.063 mm/stroke
Radial feed (for tool Ø 125): 0.125 – 3.150 mm/stroke
Spindle/total drive: approx. 19 kW / 25 kW – 380 V, 50 Hz
Weight: 7,000 kg
Accessories / Special features:
• Built-in intermediate plate 200 mm for shaping head elevation
• Hydraulic workpiece clamping (RINGSPANN brand) integrated in table for flat workpieces
• Automatic stroke and automatic feed changeover for roughing and finishing in up to 4 cuts
• Separate control and electrical cabinet, separate hydraulic unit
Pedjt Hw Hlspfx Ahgjpu
• Integrated coolant system with magnetic chip conveyor, two-hand operation
• Approx. 40 change gears, 4 shaping tool holders, 2 pulleys for stroke drive, etc.
Condition: Good, operational and can be demonstrated under power
Delivery: Ex-stock – as inspected
Payment: Net – upon receipt of invoice
Mažas skelbimas
Metzingen
1 242 km
Pavarų formavimo staklės
LIEBHERRWS 1
Skambinti
Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 265 mm
Wheel width 45 mm
Module - max. 4
Module - min. 0.3
Workpiece diameter - max. 300 mm
Stroke length max. 0-50 mm
Stroke position adjustment 25 mm
Distance between work spindle and clamping surface max. 170/245 mm
Internal spindle taper MK 4
Table size 180 mm
Table bore 95/75 mm
Number of strokes per minute 450 - 840
Total power requirement 10 kW
Machine weight approx. 5200 kg
Space requirement approx. m
max. gear wheel Ø (external) approx. 265 mm *
max. workpiece Ø for internal gearing 300 mm
max. gear width 45 mm
Module range 0.3 - 4
Stroke length 0 - 50 mm
Stroke position adjustment 25 mm
Distance table to spindle min./max. 170/245 mm
Spindle internal taper (external 90/50 internal) MK 4
Table size 180 mm
Table bore 95 / 75 mm
Table travel, transverse approx. 175 mm
Steplessly adjustable strokes per minute 450 - 840 strokes/min
Feed range 0.09 - 0.6 mm/stroke
Circular feed 2722 - 681 strokes/cutting wheel revolution
Total drive 10 kW - 380 V -50 Hz
Weight 5,200 kg
Accessories / Special Equipment
Podpfet Hwrujx Ahgopu
* Rotary switch for various operating programs and manual control
* Multiple-cutting device for roughing/finishing/burning out
* Hydraulic external workpiece clamping device mounted on the table (internal toothing performed; type of collet)
* Separate control cabinet and separate hydraulics
* Hydrostatic linear guiding with separate oil cooler
* Lateral table offset for optimal ram lift-off
* Stepless stroke rate adjustment via GS motor
* Built-in coolant system
* Pre-settable impulse counter for precise table shut-off after each cut, with digital display
* Various change gears
Mažas skelbimas
Metzingen
1 242 km
Pavarų formavimo staklės
LORENZLS 400
Skambinti
Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm
Wheel width 75 mm
Total power requirement 25 kW
Machine weight approx. 7 t
LORENZ
High-Performance Gear Shaping Machine
Model LS 400
Year of manufacture 1975 S/N 12592
_____
Max. external gear diameter 400 mm * (possibly larger)
Max. internal gear diameter approx. 350 mm
Max. gear width 75 mm
Module range 0.5 - 6
Stroke length 82 mm
Stroke position adjustment 0 - 100 mm
Distance from shaping spindle to machine body 205 mm
Spindle taper approx. MK 5
Strokes per minute roughing/finishing 118 - 1,000 /min.
Table size 400 mm
Psdet Hww Dopfx Ahgopu
Table bore 125 mm
Installation height between table and
shaping head min./max. 190/290 mm
Fixed distance shaping spindle 250 mm
Table axial travel approx. 295 mm
Number of teeth approx. 12 - 150
Feed range Tooth depth 0.01 - 0.063 mm /stroke
-"- Radial feed at
tool-Ø 125 0.125 - 3.150 mm /stroke
Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz
Weight 7,000 kg
Accessories / Special equipment:
• Hydrostatically guided slideway with separate hydraulic unit
• Built-in intermediate plate 100 mm to increase shaping head height
• Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters
• Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master)
• Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts
• Automatic and motor-driven stroke position locking at top dead center after finishing
• Separate control cabinet
• Integrated coolant system with chip conveyor and magnetic separator
• Approx. 20 change gears
Condition: Satisfactory to good, shortly demonstration-ready
Delivery: Ex stock – as inspected
Payment: Net – upon receipt of invoice
Mažas skelbimas
Metzingen
1 242 km
Pavarų šlifavimo staklės
REISHAUERRZ 301 AS
Skambinti
Būklė: naudotas, Gamybos metai: 1993, Wheel diameter – max. 330 mm
Wheel width 180 mm
Total power requirement 12 kW
Machine weight approx. 7,500 kg
R E I S H A U E R (Switzerland)
CNC Gear Grinding Machine
Model: RZ 301 AS * (* A = automatic threading)!
Year of manufacture: 1993 # 71206
_____
Wheel diameter min./max.: 10 – 330 mm
Module: 0.5 – 7
Helix angle: +/- 45°
Slide stroke: 180 mm
Max. number of teeth: 10 – 600
Workpiece clamping length: 420 up to max. 620 mm
Podpfx Aot Hwyfehgepu
Max. workpiece weight: 60 kg
Grinding worm x width: 3 of 50 x 84 – 104 mm
Grinding worm speed: 1,100 – 1,900 rpm
Spindle drive 4 kW – total drive approx. 12 kW – 380 V – 50 Hz
Total weight approx. 7,500 kg
Accessories / Special Equipment:
A modern CNC control system allows entry of all relevant gear data and part setup via conversational programming. Programming language (German/English) can be switched, DNC interface for data input and output available.
The machine operates in a continuous generating grinding process with fully automatic grinding cycles and automatic on-machine dressing of the grinding wheel.
Equipped with an automatic device for threading the grinding wheel into the gear gap – providing significant time savings, hydraulically pivotable.
Approx. 10 years ago, the profiling axis (V-axis) was electronically retrofitted by BURRI, resulting in higher accuracy, simpler profile correction, faster dressing. Currently, a REISHAUER dressing device Type SP-DR with a profile diamond disc is installed.
The workpiece swivel axis (A-axis) is also operated electronically – fast and precise positioning, hydraulically clamped, enabling faster setup times and simpler workpiece loading.
A shift-grinding unit guides the workpiece tangentially past the grinding wheel during machining, ensuring a consistently uniform grinding wheel profile in contact.
DITTEL grinding wheel balancing device
Hydraulic workpiece clamping with external collet and tailstock in the workpiece slide
Fully enclosed working area with sliding doors and oil mist extraction
No original coolant filtration system present (central supply), however a separate grinding oil centrifuge is available
Separate electrical and control cabinet, separate hydraulic unit in enclosure, grinding wheel flanges
Mažas skelbimas
Metzingen
1 242 km
Honavimo staklės - Interjeras - Vertikalios
GEHRINGM 3 - 40 - 12
Skambinti
Būklė: naudotas, Gamybos metai: 1984, Bore diameter 12 mm
Stroke 40 mm
Throat depth mm
Total power requirement 15 kW
Machine weight approx. 5 t
Space requirement approx. m
G E H R I N G
3-spindle vertical portal honing machine
Type M 3 - 40 - 12
Year of construction 1986
_____
Normal/maximum honing diameter 2.5 - 12 / 40 mm
Max. honing depth approx. 4-40 mm
Pjdpfx Ahot Hwvtjgepu
Max. spindle stroke 40 mm
Mounting height table to spindle lower/upper 300 mm
Table size / Ø 750 mm
Table height above floor 1,100 mm
Spindle speeds steplessly adjustable 800 - 4,000 rpm
Stroke speed steplessly adjustable 380 DH/min
Spindle drive 3 x 1 kW
Total drive 15 kW - 380 V - 50 Hz
Weight 5,000 kg
Accessories / Special equipment:
• Machine is equipped for precision honing of an automotive valve body approx. Ø12 x 40 mm high,
with a blind hole approx. Ø8 mm x 20 mm deep, including:
• BOSCH PLC control for programmable workflow and Cylindromatic "S"-Control.
• 8-station rotary index table, type DH 750-45, approx. Ø750 mm
• Loading of workpieces via chute, with a deburring station, pre-measuring station, and parts turning station located just outside the table area
• Pre-honing with subsequent measuring station
• Intermediate honing with subsequent measuring station
• Finish honing with subsequent measuring station
• Workpiece unloading and sorting for good and reject parts
• MAZ - 8-42 Mechanical automatic feed heads for expanding honing tools
• The 3 measuring stations operate with a pneumatic air-gauge probe, which enters the bore and, if necessary, transmits correction values to the fine adjustment of the spindle.
• Complete coolant system with belt filter, separate electrical cabinet, separate hydraulics, etc.
Mažas skelbimas
Metzingen
1 242 km
Honavimo staklės - Interjeras - Vertikalios
GEHRING1 Z 250 - 131
Skambinti
Būklė: naudotas, Gamybos metai: 1965, Honing diameter: 80 mm
Stroke: 280 mm
Throat depth: 300 mm
Total power requirement: 6 kW
Machine weight: approx. 2.6 t
Max. honing diameter: 10–100 mm
Max. honing depth: approx. 250 mm
Max. spindle stroke: 260 mm
Throat depth: 300 mm
Installation height: 1,000 mm
Table size: 350 x 500 mm
Table height above floor: 500 mm
Spindle speeds, steplessly adjustable: approx. 85–300 rpm / 170–600 rpm
Stroke speed, stepless hydraulic: 0–23 m/min
Spindle drive: 2 kW
Total drive: approx. 6 kW – 380 V – 50 Hz
Weight: approx. 2,600 kg
Accessories / Special equipment:
- Integrated 2-station rotary table for accommodation of 2 workpieces, with mechanical workpiece clamping via hand lever.
- Hydraulic feed of the tool
- Shut-off via timer, presumably with air measuring device
- Honing oil system, various splash guards, etc.
Ppjdpfxot Hwupo Ahgju
Condition: good – demonstration ready
Delivery: ex stock – as inspected
Payment: strictly net – upon receipt of invoice
We look forward to receiving your order.
Further honing machines constantly in stock; please inquire with us.
Mažas skelbimas
Vokietija
872 km
Honavimo staklės - Interjeras - Vertikalios
Werkzeugmaschinenfabrik Frunse2A78
Skambinti
Būklė: naudotas, Gamybos metai: 1977, Techninės detalės:
Gręžinio skersmuo: 125 mm
Eiga: 500 mm
Iškyša: - mm
Atstumas nuo stalo iki veleno apatinės dalies: 525 mm
Šlifavimo veleno apsukos: 26–1200 (12 žingsnių) aps./min
Gręžinio skersmuo: 30 (min.) mm
Gręžinio skersmuo: 165 (maks.) mm
Stalo poslinkis: 800/150 (maks.) mm
Stalo tvirtinimo paviršius: 500 x 1000 cm
Bendra galios poreikis: 4,22 kW
Staklių svoris apytiksl.: 0,15 t
Staklių matmenys (IxPxA): 1,30 x 1,20 x 2,70 m
Yra judantis stalas, kuris juda išilgai ir skersai.
Rankinis tepimas su aušinimu.
Staklės tinka honavimui.
Ppsdpfsw Rv Taex Ahgju
Galima greita siūbuojanti eiga tarp dviejų reguliuojamų galinių padėčių.
Mažas skelbimas
Vokietija
872 km
Honavimo staklės - Interjeras - Vertikalios
Gehring1Z600F
Skambinti
Būklė: naudotas, Technical details:
Honing diameter: Ø 400 mm
Stroke: 600 mm
Psdpfx Aeu Ngybshgspu
Throat depth: 390 mm
Table size: 1,550 x 780 mm
Clamping surface: 1,400 x 480 mm
Table: fixed
Total power requirement: 4.1 kW
Machine weight approx.: 2.8 t
Machine dimensions (LxWxH) approx.: 2.0 x 1.2 x 4.35 m
Precision honing machine with cross table
Further technical features:
- Longitudinal travel of machine table approx. 500 mm
- Cross travel of machine table approx. 200 mm
- Working height 350 mm (not adjustable)
- Distance column/table 0 – 200 mm
Equipment:
- Oil tank Ø 300 x 600 mm
- Control panel
as per factory specification.
*
Mažas skelbimas
Vokietija
1 131 km
Pavarų formavimo staklės
Gleason-PfauterP150S
Būklė: naudotas, Gamybos metai: 2014, Techninės detalės:
Maks. rato skersmuo: 150 mm
Rato plotis: 350 mm
Pjdpjxtbmijfx Ahgspu
Modulis - maks.: 4
Bendras galios poreikis: 48 kW
Mašinos svoris apie: 13 t
Užimama vieta apie: 4,88 x 4,40 x 3,56 m
Veleno apsukos: 100-1000 aps./min
Įeinanti ir išeinanti grandininė juosta su įrankių laikikliais, drožlių transporteriu, hidrauliniu agregatu ir oro kondicionieriumi
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Babberich
1 224 km
NC honavimo staklės 250 x 12000 mm
PleigerHF 75 / 115 S-30
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2002, Manufacturer: PLEIGER
Model: HF 75 / 115 S 30
Control: Siemens Simatic panel
Year of Manufacture: 2002
Stroke speed, slide step 1: 4 – 20 m/min
Stroke speed, slide step 2: 0.3 – 3 m/min
Chuck rotation speed step 1: 300 rpm and 320 Nm
Chuck rotation speed step 2: 100 rpm and 1290 Nm
Horizontal deep hole honing machine
Horizontal tube honing machine
Horizontal cylinder honing machine
Horizontal pipe honing machine
Fine finishing of cylindrical bores
Specifications
Metric US Standard
Bore depth: 11,500 mm
Spindle power: 55 kW
Speed: 300 rpm
Dimensions (approximate):
Length: 25,000 mm
Width: 2,000 mm
Height: 2,000 mm
Ppedjkvnc Sopfx Ahgeu
Weight: 30,000 kg
Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all critical details.
Mažas skelbimas
Hessisch Lichtenau
1 040 km
Dėžinis stulpinis gręžimo staklės, stulpinės gręžimo staklės, pavarų gręžimo staklės, gamybinės gręž
ALZMETALLAB 40 ST
Skambinti
Būklė: naudotas, Box column drilling machine, geared head drill ALZMETALL Type AB 40 ST
Production drilling machine
Serial no. 750 Year of manufacture: 1994
Drilling capacity: 40 mm
Spindle taper: MT 4 – short quill
Arm reach: 325 mm
Quill travel: 200 mm
Table size: 740 x 460 mm
Height adjustment of drill head: 700 mm
Pjdpfoza Hzgex Ahgspu
Distance spindle – table: max. 1015 mm
Spindle speed: 56 – 2500 rpm, 12 gearbox steps
Automatic feed: 0.15 – 0.2 – 0.3 – 0.36 mm/rev
Motor power: 4 kW
Mains connection: 380 Volt, 50 Hz
- Spindle speed via 12-speed gearbox
- Drilling and tapping device with clockwise/counterclockwise operation
- Electric foot switch for reversing to counterclockwise operation when tapping is interrupted
- Rapid approach via hydraulic quill movement
- Semi-automatic operating cycle: rapid approach – working feed – rapid return
- Manually adjustable head height via hand crank
- Manually adjustable table height via hand crank (table height 740 to 1170 mm)
- Coolant system
- Control cabinet at the rear of the machine
- Mounted on steel plate (1300 x 750 x 15 mm) with machine feet
- METABO quick-action drill chuck 3 to 16 mm
- Operating manual and electrical diagram
Overall height (head fully raised): 2750 mm
Required space (L x W x H): 1400 x 850 x 2300 mm
Weight: 1250 kg
Good condition
Mažas skelbimas
Buchdorf
1 140 km
Kūginės pavaros apdirbimo staklės
OerlikonE 37 EX 2
Skambinti
Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodamas Oerlikon kūginis/varžtinis reduktorius E 37 EX 2 serijos, serijos numeris 828499L01.1.
Įrenginys išimtas iš veikiančios įrangos ir tinka bandymo stendams, specialiems įrengimams bei pramoninėms pavaroms.
Techniniai pagrindiniai duomenys (bendri):
Gamintojas: Oerlikon
Tipas: E 37 EX 2
Konstrukcija: kūginis/varžtinis reduktorius
Pritaikymas: bandymų stendai, mašinų gamyba, pramoninės pavaros
Būklė: naudotas, veikiantis
Psdpfx Asypb Iyehgopu
Mažas skelbimas
Mindelheim
1 215 km
Pavarų kolonėlės gręžimo staklės
MIOTAL®GB 50 VG
Skambinti
Būklė: naujas, MIOTAL® GB 50 VG Gear Column Drilling Machine with Tapping Attachment
Psdpfx Ahjpxmliogepu
Technical Data:
Drilling capacity: 50 mm
Tool holder: MT 4
Quill stroke: 200 mm
Tapping capacity: M33
Face mill: 100 mm
Shank cutter: 25 mm
Throat depth: 340 mm
Table size: 600 x 600 mm
Column diameter: 180 mm
Number of T-slots: 2
T-slot size: 22 x 35 mm
Motor power: 3 kW
Weight, approx.: 750 kg
Features:
- Coolant system
- Automatic spindle feed
- Tapping attachment
- LED machine lamp
- Height-adjustable safety guard
- Rotating table
- Manual fine feed
- Spindle guard with safety interlock
Palengviname jums paiešką: "reishauer pavarų honavimo staklės"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo

























































































































































































