Pavarų formavimo staklės

LORENZ LS 400

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at Tsdpfst Hww Dex Alwob tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 2000, Table length: 1160 mm Table width: 710 mm Clearance: 650 mm Control: WENZEL ME 5007 Total power requirement: kW Machine weight approx.: 800 kg Space requirements approx.: m W E N Z E L CNC-controlled vertical 3D coordinate measuring machine Model: LH 54 CNC, Year of manufacture: 2000 Regularly maintained and calibrated by the manufacturer _____ Y-axis configured as a longitudinally movable measuring portal: 600 mm X-axis as a transverse measuring head carriage: 500 mm Z-axis as a vertical measuring spindle approx.: 400 mm Tsdpst Hw S Iofx Alwob Max. workpiece weight / table load approx.: 200 kg Clearance under the measuring portal approx.: 650 mm Usable table size approx.: 1,160 x 710 x 160 mm Table height above floor approx.: 850 mm Machine height approx.: 2,300 mm Weight approx.: 800 kg Special features / Accessories: • Machine delivered with increased accuracy • Measuring table, traverse, and spindle made of dark natural granite; table with 3 x 4 threaded holes for attaching workpieces/fixtures • All axes are air-bearing, providing smooth operation and virtually wear-free mechanics, equipped with incremental scales with 0.0005 mm resolution • WENZEL CNC Control Type ME 5007 for 3 to 6 axes with ME 4700 movable hand control console with 2 joysticks for accessing all software functions. Ideally equipped for: • WENZEL measuring software METROLOG–II Level 2 for standard geometry measurements, 3D graphical workpiece representation, graphic reports, etc. Including keyboard • RENISHAW control unit Model PHC 10–2 suitable for • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° steps) Model PH 10 T with 5-way probe system Model TP 200 and various probe accessories, incl. RENISHAW Probe Interface PI 200 • Automatic probe change possible, 6-position probe magazine Model SCR 200 mounted on the table • Reference sphere for table setup, work table with console, various clamping devices • Various cassettes and CDs with various software. Separate PC for measuring software, printer Condition: Very good – generally in stock under power, available for inspection and demonstration. Dismantled by a specialist and reassembled here. Delivery: ex stock – as is, as inspected Payment: Net – upon receipt of invoice.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Todpfsqt Dmyox Alwsb Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: geras (naudotas), Gamybos metai: 2008, Universalus apdirbimo centras Mašinos tipas: DMG DMU 60 monoblock Valdymas: Heidenhain iTNC 530 Pagaminimo metai: 2008 Prieinama nuo: iš karto TECHNINIAI DUOMENYS Eigos X ašis: 730 mm Y ašis: 560 mm Z ašis: 560 mm B ašis: ° C ašis: 0,001° Valdomų ašių skaičius: 5 Tjdoziy Iqspfx Alwob Sukimosi greičio diapazonas: 12 000 aps./min. Įrankio tvirtinimas: SK 40 Įrankių keitiklis Įrankių vietų: 60 NC apvalus stalas: Ø 600 Stalo dydis: 1.000 x 600 mm Didžiausia stalo apkrova: 500 kg Įranga Gnybtų transporteris Vidinis aušinimas (IKZ): bar Popieriaus juostos filtras Matavimo jutiklis: Heidenhain TS 649 Roto Clear Įrankių matavimas Drožlių plovimo pistoletas Alyvos rūko ištraukimas Darbo režimas: 4

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Vertikal, isoleret rustfrit ståltank med kappe til køling, 21.800 L Kapacitet: 21.800 liter Tjdpsv I Hbxsfx Alweb Udvendige mål: Diameter Ø 2500/2600 mm, Total højde 6500 mm. Vertikale, isolerede rustfrie ståltanke med kølekappe – 3 stk. Bundmonteret mandehul. Materiale: AISI 316

Būklė: naudotas, Gamybos metai: 1996, Techninės detalės: Spaudimas: 300 t Lenkimo ilgis: 6000 mm Valdymas: Delem DA 24e Atstumas tarp statramsčių: 2x5100 mm Iškyša: 645 mm Įmontavimo aukštis: 520 mm Lakšto storis: 5 mm Bendras galios poreikis: apie 10,0 kW kiekvienai mašinai Apytikslis mašinos svoris: apytiksl. 66 t Mašinos matmenys: ilgis 12,0 x plotis 2,3 x aukštis 3,65 m Hidraulinė lankstymo staklė 6000 mm x 300 t su įmontuotu įrankiu. Tsdpfx Aju Ib Drjlwjb - Konsolės ilgis = 720 mm - Įskaitant galinį atmušėją (be bombiruotės) reguliuojamas horizontalus/vertikalus eigos gylis: 680/200 mm varikliu valdomas Papildomai galima pasiūlyti dvi tokias lankstymo stakles pardavimui: - Gali būti naudojamos kaip tandem lankstymo staklės, kai lenkimo ilgis 12.000 mm, spaudimas 300 t/kiekviena, darbinio stalo dydis: plotis 165 x ilgis 12000 mm, - Programavimas sinchroniškai abiems lankstymo staklėms arba naudojimas atskirai. Papildomai galima įsigyti įvairių įrankių. Yra dokumentacijos kopija. I.D.

Gamybos metai: 1993, būklė: labai geros būklės (naudotas), 2 vnt. išcentrinės siurbliai Gamintojas: KSB Modelis: WKF 50/7 Našumas: 5,5 l/s (19,8 m³/h) Kėlimo aukštis: 214 metrų (21,4 bar) Maksimali temperatūra: 130°C Sandarinimas: Sandarinimo žiedas su apsaugine vandens jungtimi Elektros variklis: VEM Variklio galia: 30 kW Sukimosi greitis: 2935 aps./min. ! Kaina už vienetą ! Tedeibwarepfx Alwjb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 3 000 h, X ašies eiga: 6 100 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 950 mm, CNC-Fahrständer-Fräsmaschine – Komplett generalüberholt durch REM (2021) Leistungsstarke und vielseitige Schwerlast-Fräsmaschine, 2021 von REM-Spezialisten mit modernster Heidenhain TNC 320 Steuerung komplett modernisiert. Sofort einsatzbereit für die Produktion. Tsdpfjn D N H Tjx Alwjb HAUPTTECHNISCHE DATEN: • X-Achse (Querweg): 6.000 mm • Y-Achse (Vertikalweg des Fräskopfes): 2.000 mm • Z-Achse (Längsschlittenweg): 950 mm • Doppelfräs-Kopf | Kopfrotation: 360° • Spindeldrehzahl: 1.000 – 4.000 U/min • Spindelaufnahme: ISO 50 (automatische Spann-/Lösefunktion) • Kopfmaße: 290 × 290 mm • Spindelmotorleistung: 15 kW (Gleichstrom) • Maschinengewicht: ca. 32 Tonnen • CNC-Steuerung: Heidenhain TNC 320 WARUM BEI REM KAUFEN? ✔ Maschine vollständig geprüft und im Arbeitsbetrieb getestet ✔ Moderne CNC-Nachrüstung – neue Elektrik, neue Antriebe ✔ Dokumentation und technischer Support verfügbar ✔ Weltweiter Export | Wettbewerbsfähige Versandkonditionen Ideal zur Bearbeitung schwerer Werkstücke in Luftfahrt, Energie- und Schwerindustrie. Kontaktieren Sie uns für vollständige technische Daten, Fotos und Videodemonstration.

Būklė: geras (naudotas), Flat dies thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat dies thread rolling machine / knurling machine - Model: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: 3-step adjustable - Knurling plate: RAA 1.0 Tedsi Eg Nkopfx Alwsb - Central lubrication - Dimensions: 1680/920/H1440 mm - Weight: 1,308 kg

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180x100 mm Working height: 925 mm Saw blade speed: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirements: approx. 1.9 x 1.45 x 2.1 m SPECIAL PROMOTIONAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20192) · Miter cutting left 60° / right 45° · Hydro-pneumatic control of saw unit Tjdpfxed Iin Ho Alwjb · Electro-pneumatic material feed unit · Smooth-running, high-torque worm drive with large g ear reduction, integrated into a rigid cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, also with lateral quick adjustment for miter angle changes · Precision prismatic guide for the drive head, adjustable on the side · Especially robust machine base with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Adjustable cutting pressure NOTE: Price does not include saw blade! (Saw blade price: €204)