Mütek Systemtechnik Hawk-Eye pirkti naudotą (3 290)

Gamybos metai: 2026, būklė: naujas, *The offer is only for the neodymium overband magnet, not the underlying conveyor belt. *Neodymium magnets are among the strongest magnets in the world. They have extreme holding force and should not be compared with ferrite magnets. Extremely high separation efficiency, depending on material layer height and input material. Hedodubpuepfx Ahqsu Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Control unit not included Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm *Nails are attracted and discharged to the side along a length of 600 mm, outside the magnetic field. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer, depending on the maximum length of metal parts. Ideal for separating nails from wood chips. Optionally usable in a single-shaft shredder with extraction. Requirements: *Your belt width, or effective internal width (of the existing conveyor belt), should ideally be less than 55 cm. *Suitable for separating nails from material streams with a height less than 12 mm, and chip lengths smaller than 25 mm. ----- Optional at extra charge: Cross and incline belt demonstration units from €8,770 net.

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Hsdstqfhxepfx Ahqju Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Installation example 1: Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: naujas, Gamybos metai: 2026, Skersmuo: 160 mm Papildomai, už papildomą mokestį, galima įsigyti šių skersmenų: 180, 200, 250, 300 mm. Dėl kitų skersmenų teiraukitės. Labai tvirta pramoninė konstrukcija. Idealiai tinka vinių/metalo dalių atskyrimui iš medžiagos srautų. Pavyzdžiui, po medžio smulkintuvo. Komplekte 3 itin galingi magnetai. * Pageidaujant, gaminį galima aprūpinti iki 6 magnetų (papildomas mokestis už kiekvieną papildomą magnetą +49 €) - Papildomai galima pasirinkti neodimio magnetus vietoje feritinių. Hjdpfjchuvrjx Ahqou Jūsų privalumai: + Ypač didelės peržiūros durelės su tarpine lengvam vinių pašalinimui + Tvirtas greitojo užrakto mechanizmas + Pagaminta Vokietijoje Peržiūros durelės / anga: 35x18 cm Montavimo ilgis gali skirtis.

Būklė: naujas, Gamybos metai: 2025, Dar viena mašina iš karto prieinama! Briketų presas su PLC valdymu ir automatine briketų ilgio kontrole Našumas: iki 60 kg/h Briketas: 50 mm cilindrinis Variklis: 5,5 kW Matmenys: 1.900 x 1.350 x 1.410 mm Svoris: apie 860 kg Reikalavimai: Išeitinė medžiaga idealiai trumpesnė nei 25 mm drožlių ilgio Hedsv Rpxljpfx Ahqju Drėgnumas 6–12% ATRO Mašina tinkama nepertraukiamam darbo režimui. Pvz., briketavimas iki 2,5 val.; 1 val. pertrauka ir pan. Jei mašiną reikia eksploatuoti ilgiau nei 2,5 val. nepertraukiamai, būtina prijungti papildomą aušinimą.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The ideal machine for shredding cables, featuring optimized cutting geometry and approximately 9 hours of operation. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 14 pieces, 40x40mm, multiple cutting edges, rotatable Rotor diameter: 260 mm Control system: Omron PLC Cutting chamber opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation selectable (15 - 40 mm) Suction connection Ø 160 mm Weight: approx. 1,300 kg Hjdpfjgmfa Asx Ahqsu Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at additional cost: - Double blade row + €1,990 net (28 instead of 14) - Surcharge for four-sided segmented bottom + €2,170 net (Prevents pusher jamming. Recommended when shredding plastics, paper, or veneers less than 3 mm thick.) - Raise shredder height by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Reference: Bea9ia3l27 Raw material requirements: - Mineral contaminants such as sand, stones, etc., cause increased wear. We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material by freight, and we will document the test with pictures and videos.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Special price for our demonstration machine One machine remaining, immediately available (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood as well as pallet offcuts. Pallets must be prepared using a jigsaw or chainsaw so that they will fit upright into the hopper—see image 2. Ideally, the pieces should be around 40x20x20 cm so that the wood can lie flat on the slider floor. This enables the machine to operate at maximum efficiency. A hydraulically operated pusher moves along the bottom of the shredder and automatically pushes the wood against the rotor depending on load. Material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on screen size and how well the material is prepared. *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent pusher control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, reversible multiple times Hsdpjdwktkefx Ahqju Option: double blade row + €995 net Rotor diameter: 260 mm Control unit: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Fill volume approx. 0.6 cubic meters Hydraulically operated pusher Screen perforation as required (10 - 30 mm) Extraction stub Ø 160 mm Weight approx. 1,300 kg (depending on equipment) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% absolute dry . Supplied as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta starting - Rapid hydraulic system - Auto stop for rotor idle run - 70–90 rpm for high throughput performance - Timed operation to prevent idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant - MADE IN GERMANY . Shredder options: - Shredder height increased by 30 cm (prepared for conveyor belt) +€2,080 net - Inclined discharge conveyor +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet +€5,980 net - Control unit for conveyor & overband magnet +€2,750 net (start and stop each synchronized with the shredder) - Hopper extension +€940 net - Eco rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double blade row +€995 net . Raw material requirements: - Moisture content (absolutely dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. will increase wear.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Our best-selling briquetting press – the classic. + Proven and simple technology for extremely high reliability + 25 years of experience, continuous development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional extras at additional cost: * Surcharge for level sensor enabling automatic operation + €995 net * Surcharge for large pre-compression chamber + €970 (recommended for very light material such as straw; machine will be 13 cm wider) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Hjdpfx Ahsgl Nlmoqou Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compressor Press jaws cooling option: no Hydraulic oil cooling option: yes Filling level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (a.d.) must be at least 6% up to a maximum of 18% - Maximum chip length is 15 mm - Installation temperature: heated room with at least +5°C - Customer must ensure hydraulic oil retention - Feedstock must be free from metals and mineral contaminations such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery Hedpfegfm Ryex Ahqou • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Būklė: naudotas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, bendras svoris: 1 kg, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Parduodamas ZEISS T-Scan Hawk 2 – itin tikslus optinis 3D skaitytuvas, skirtas sudėtingiems matavimo ir tikrinimo darbams. Idealiai tinka tiksliems 3D matavimams pramonėje ir moksliniuose tyrimuose, ypač, kai reikia matuoti komponentus sudėtingoje aplinkoje. Greitas naudojimas, paprastas valdymas. Būklė: Mažai naudotas, daugiausia naudojamas parodose, ekspozicijose ir mokymuose. Komplektacija: · T-Scan Hawk 2 Lite · Mėlynas 2 klasės lazeris, saugus akims (IEC 60825-1:2014) · Svoris: < 1 kg · Kalibravimo plokštė (DAkkS kalibruota) · Jutiklio kabelis Hjdpfxozyp Sts Ahqou · Transportavimo dėklas · Priėmimo patikrinimas mūsų įmonėje, naudojant sferinius etalonus, remiantis ISO 10360 · Priėmimo dokumentas su atsekamumo įrodymu · ZEISS INSPECT OPTICAL 3D Free · Jutiklio tvarkyklė T-SCAN Hawk 2 ZEISS INSPECT OPTICAL 3D Free · Naujų ir esamų projektų atidarymas ir redagavimas · Taškų debesų ir poligoninių tinklų importavimas · Poligoninių tinklų kūrimas, redagavimas ir apdorojimas · Elementų konstravimas: reguliarios geometrijos, taškai, skerspjūviai, kreivės, paviršiai, matmenys · Standartinių formatų IGES, VDA, STEP, JT Open, STL, PLY CAD importavimas · Dažniausiai naudojamų derinimo metodų taikymas · Palyginimas su CAD naudojant spalvotą nukrypimų vaizdą · Matavimai ir formos/padėties analizė pagal ISO GPS ir ASME Y14.5 · Ataskaitų modulis Jutiklio tvarkyklė T-SCAN Hawk 2 · Nustatymas ir kalibravimas · Vartotojo valdomas kalibravimas · Matavimo duomenų rinkimas ir projektų valdymas · Konfigūruojamas darbo eigos asistentas

Būklė: naujas, Gamybos metai: 2026, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Hsdpeffh Atsfx Ahqou Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Būklė: geras (naudotas), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160, Connection 160, Hjdpfxsrb D No Ahqju Fan 2.2 kW Airflow 1850 m³/h / 400 V

Gamybos metai: 2010, būklė: naudotas, Tikslus skysčio lygio kontroliavimas, skirtas nustatyti, ar buteliai yra per mažai arba per daug užpildyti. Įranga (papildoma): skysčio lygio kontrolė Maksimalus slėgis: 10 bar Srovė: 8 A Įtampa: 230 V Dažnis: 50/60 Hz Ilgis: 1,2 m Plotis: 0,93 m Aukštis: 2,2 m Įranga: skysčio lygio ir uždarymo dangtelio nustatymas, įskaitant oro srovę, nukreiptą į butelio kaklelį prieš uždarymą, ir išleidimo sistemą su surinkimo stalu. Svoris: 350 kg Hedeztzcdjpfx Ahqeu

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, Parduodama Expert Systemtechnik vandens srovės pjovimo įranga su aukšto slėgio BFT siurbliu. 1) Pjovimo įrenginys: Expert Systemtechnik cutEXPERT variojet, pagamintas 2020 m., skirta pjauti: odą/porolonus/techninius audinius/gumos gaminius/kompozitines medžiagas/pakuotes, maksim. pjovimo greitis: 70 m/min, pakartojimo tikslumas: +/-0,2 mm, vandens sąnaudos: apie 0,2 l/min, pjovimo matmenys X/Y: 1800 mm/3000 mm. 2) Aukšto slėgio agregatas: BFT Servotron 40.45+, pagamintas 2020 m., variklio galia: 45 kW, maksimali našumas: 4,6 l/min, projektinis slėgis: 4200 bar, maksimali darbinis slėgis: 4000 bar. Įrenginio matmenys X/Y/Z: apie 2000 mm/1000 mm/1400 mm, svoris apie 1200 kg. Yra dokumentacija. Galima apžiūrėti vietoje. Hsdpfxoxmkcms Ahqeu

Gamybos metai: 2020, veikimo valandos: 100 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, bendras ilgis: 1 330 mm, bendras plotis: 840 mm, bendras aukštis: 1 870 mm, suslėgto oro jungtis: 6 juosta, įvesties srovės tipas: Oro kondicionierius, Kroviklis padėklų krautuvas Traystapler perstatymo įrenginys Tray-Loader TL-6040 – dviejų takelių padėklų (dėžių) krovimo-nukrovimo modulis ekonomiškam LED plokščių padėklų transportavimui. Tušti padėklai paimami iš transportavimo vežimėlio, automatiškai pozicionuojami ir paruošiami užpildymui. Užpildžius, padėklai automatiškai nukraunami ant antro transportavimo vežimėlio. • Kompaktiška konstrukcija • Mažas užimamas plotas Hjdpfsxuqtbjx Ahqju • Krovimo-nukrovimo modulis • Transporto vežimėlis • Standartinio padėklo dydis: 400 x 600 mm • Tvirta suvirinto plieno konstrukcija • I x P x A: 840 x 1.330 x 1.870 mm • Rankinio valdymo aukštis: 930 – 1.050 mm • Suslėgtas oras 0,6 mPa (6 bar), be alyvos, filtruotas, sausas • Vidutinės sąnaudos apie 10 l/min • Darbo temperatūra +18°C - +30°C • Svoris apie 300 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK02UXKP0365, matavimo diapazonas X ašis: 550 mm, matavimo diapazonas Y ašis: 600 mm, Aukcionuojamas Zeiss T-Scan Hawk su tik 20 darbo valandų! TECHNINĖ INFORMACIJA Didž. matavimo sritis: 550 mm x 600 mm Matavimo tikslumas: 0,02 mm + 0,035 mm/m ĮRANGOS DUOMENYS Hedsx Sqfnopfx Ahqju Lazerio klasė: 2M klasė (akių saugumas) pagal IEC 60825-1:2014 Darbo valandos: 20 KOMPLEKTACIJA Nešiojamasis kompiuteris GOM Inspect programinė įranga

Būklė: geras (naudotas), Gamybos metai: 2010, konvejerio juostos ilgis: 900 mm, konvejerio juostos plotis: 1 300 mm, Ilgis: 900 mm Plotis: 1300 mm Hedpfx Aozd T Iaehqju

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Hjdpfx Ahegbkkroqeu Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 665182, X ašies eiga: 650 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 500 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, bendras aukštis: 2 850 mm, bendras ilgis: 3 300 mm, bendras plotis: 2 400 mm, bendras svoris: 9 000 kg, veleno greitis (maks.): 42 000 aps./min, įrankių magazino lizdų skaičius: 40, Įranga: dokumentacija / vadovas, OPS INGERSOLL SPEED HAWK 650 CNC apdirbimo centras Hodjy Tvcuspfx Ahqeu – Svarbi pastaba: 2025 m. velenas buvo pakeistas, kaina – apie 40 000 EUR, todėl veleno darbo laikas yra nedidelis! – Padėklų matmenys: apie 320 x 320 mm – Padėklai tvirtinami ant besisukančio stalo – Tvirtinimo sistema: HSK-E 40 – Daugiau techninių duomenų rasite nuotraukose – Su technine dokumentacija – Su HSK-E 40 įrankių laikikliais ir trimis padėklais Dėmesio: prekė turi būti paimta 2026 m. liepos 21–23 d., tiksli data bus nustatyta vėliau. FCA D-73529 Schwäbisch Gmünd – pakrauta į sunkvežimį.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, veikimo valandos: 100 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 300 kg, Tray Loader / Tray Stacker / Transfer Unit Tray-Loader TL-6040 – Transfer Unit - Dual-lane loading and unloading module for the efficient transport of trays (boxes) used for printed circuit boards (PCBs). Empty trays are removed from the transport cart, automatically positioned, and presented for loading. After loading, the trays are automatically stacked on a second transport cart. • Compact design • Small footprint • Up-down stacking module Hedpfx Asunh I Nehqeu • Transport carts • Standard tray size: 400 x 600 mm • Robust welded steel frame • Dimensions (W x D x H): 840 x 1,330 x 1,870 mm • Manual operating height: 930 – 1,050 mm • Compressed air 0.6 MPa (6 bar), oil-free, filtered, dry • Consumption average approx. 10 l/min • Ambient temperature +18°C - +30°C • Weight approx. 300 kg

Būklė: geras (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 3 000 mm, konvejerio juostos plotis: 400 mm, Įranga: Tipinė plokštelė prieinama, Konvejeris su greičio reguliatoriumi, „RK Schmidt Systemtechnik“ gamintojas, pagamintas 2022 m., matmenys (ilgis x plotis x aukštis): 3000 x 400 x 900 mm, pagrindas iš aliuminio su rateliais, yra 2 vnt. Hsdpfxstr T Irs Ahqju

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras plotis: 600 mm, bendras ilgis: 1 200 mm, bendras aukštis: 2 300 mm, bendras svoris: 150 kg, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, darbo diapazonas: 400 mm, produkto aukštis (maks.): 30 mm, garantijos trukmė: 12 mėnesiai, valdiklio modelis: SPS-Steuerung Siemens Simatic HMI, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, pozicionavimo tikslumas: 1 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, apšvietimas, dokumentacija / vadovas, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display Hedpfeyycqxjx Ahqeu • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Hodpfex Af Rdjx Ahqsu Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, bendras svoris: 150 kg, bendras aukštis: 2 300 mm, bendras ilgis: 1 200 mm, bendras plotis: 600 mm, valdiklio modelis: SPS-Steuerung, darbinis plotis: 300 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, stalčių skaičius: 1, pozicionavimo tikslumas: 1 mm, darbinio aukščio: 30 mm, darbinis ilgis: 400 mm, darbo diapazonas: 400 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head Hedpfxsyx Hgbj Ahqsu • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)

Gamybos metai: 2015, būklė: beveik kaip naujas (naudotas), Kombipakker i rustfrit stål Multipack Producent: Sema Systemtechnik Hsdjh Hq U Uepfx Ahqou Maskinemodel: 1400s-FN-TPW Produktionsår: 09/2015 Fuldstændig udført i rustfrit stål Maskinen har ikke været i brug længe – fremstår næsten som ny!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, bendras svoris: 150 kg, bendras aukštis: 2 300 mm, bendras ilgis: 1 200 mm, bendras plotis: 600 mm, apkrova vienai atramai: 5 kg, darbo diapazonas: 400 mm, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany Hedpfsxrgkwox Ahqju • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar • Dimensions: 1200 x 600 x 2300 mm (LWH)