Löwer Rėminis Šlifuoklis pirkti naudotą (7 730)

Būklė: naudotas, Edge sanding machine LÖWER RSM 280 SX -used- Frame sanding machine Sanding pad, Oscillation, Guodju R Tbhspfx Ap Isc Frame sanding device, Feed belt, Belt cleaning ----- Technical specifications ----- Sanding width: 190 mm, Max. workpiece thickness: 120 mm, Feed speeds: 6, 11, 16 m/min, Motor: 5.5 kW, Weight: 550 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, bendras svoris: 950 kg, Šlifavimo juostos ilgis 2200 mm, šlifavimo juostos plotis 400 mm, stalo ilgis 1200 mm, darbinis aukštis 120 mm, šlifavimo plotis 390 mm, šlifavimo juostos greitis apie 21 m/s, padavimo greitis 6 - 11 - 16 m/min, variklis 7,5 kW, padavimo variklis 0,26 - 0,55 - 1 kW, pneumatinė juostos osciliacija ir juostos nupūtimas, rėmo atrama, važiuoklė Gujdpfsxq Ehxsx Ap Iec

Būklė: labai geros būklės (naudotas), KATALOGO NR. 6507 TECHNINIAI DUOMENYS LYGINIMO STAKLĖS: - veleno plotis: 510 mm - voleliai apatiniame stale - originali ketaus reguliuojama liniuotė su kampo reguliavimu - stalų ilgis: 1810 mm - abu stalai reguliuojami STORIO PLANAVIMO STAKLĖS: - maksimalus apdirbamo elemento storis: 200 mm - veleno apsauga storio pjovimo agregate iš viršaus: - dantukai - įvedimo traukiantis velenas, dantytas - prispaudėjas - obliavimo velenas - prispaudėjas - išvedimo traukiantis velenas, lygus iš apačios: - 2 reguliuojami voleliai apatiniame stale - 2 ruošinio padavimo greičiai - pagrindinis variklis: 2,95 kW - matmenys ilgis/plotis/aukštis: 1940x1200x1120 mm - svoris: 970 kg Gusdpey N Rb Dofx Ap Ioc Grynasis kaina: 13 900 PLN Grynasis kaina: 3 300 EUR Kaina apskaičiuota pagal kursą 4,2 PLN/EUR (esant didesniems kursų svyravimams, kaina gali keistis)

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large Gujdpfx Aevnv Tqjp Iec sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s Guodjvu Hgbopfx Ap Iec - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Gamybos metai: 1994, būklė: geras (naudotas), Lakštinio metalo apdirbimo priedai Multi V apatinis įrankis 75 x 75 x 3100 mm Bendras ilgis: 3100 mm Bendras plotis: 75 mm Ilgis: 3100 mm Plotis: 75 mm Aukštis: 75 mm Atkreipkite dėmesį: informacija šiame puslapyje surinkta pagal mūsų geriausias žinias ir galimybes, taip pat iš gamintojo. Informacija pateikiama sąžiningai, tačiau tikslumas negarantuojamas. Todėl siekiant išvengti nesusipratimų, rekomenduojame patikrinti visą svarbią informaciją. Gujdpfx Apozc Izte Ioc

Būklė: geras (naudotas), Lakštų apdirbimo priedai Multi V apatinis įrankis 140 x 140 x 6000 mm Bendras ilgis: 6000 mm Bendras plotis: 140 x 140 mm V griovelio plotis: 8 - 10 - 16 - 20 - 24 - 30 - 40 mm Godpezc Izgofx Ap Iouc Atkreipkite dėmesį: informacija šiame puslapyje surinkta pagal mūsų geriausias žinias ir, kiek įmanoma, iš gamintojo. Informacija pateikiama sąžiningai, tačiau tikslumo užtikrinti negalime. Jos nėra pasiūlymas ar sutarties sąlygos. Rekomenduojame patikrinti visus svarbius duomenis.

Būklė: naudotas, Šlifavimo plotis: 150 mm Variklio galia: 1 kW Pakreipiama iki 90 laipsnių Trimatė, pasukama briaunų šlifavimo mašina Löwer KS 225 tipas tiksliam tiesių ir lenktų medienos briaunų šlifavimui. Lengva konstrukcija ir galingas variklis užtikrina tolygų šlifavimo paviršių esant dideliam nuėmimui. Idealiai tinka mažoms stalių dirbtuvėms, baldų gamybai ir vidaus apdailai. Gedpfjy Umfvex Ap Ieuc Pritaikymas: horizontalus kraštas, horizontalus paviršius arba vertikalus pasvirimas.

Būklė: naudotas, Spalva: Pilka Poliravimo ir apdailos automatas Löwer FA 4 S Gjdpewnh Avefx Ap Isuc Metai: 1998 Mašinos nr.: 9667 400 V, 14,5 amperų 4 x 0,37 kW varikliai Darbinis ilgis: 3000 mm Matmenys: 5000x1805x1600 mm (Ilg. x Pl. x Auk.), svoris 550 kg - Dokumentacija prieinama: Taip - CE sertifikatas: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Maržos apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas mainais galimi bet kuriuo metu visiems pramonės sektoriaus įrenginiams Yorick Diebels

Būklė: naujas, Number of sanding units: 8 pcs. Sanding width: 180 (260) mm Max. sanding height: 160 mm Dimensions (L/W/H): 3065x1600x1900 mm Guedsvnv Uhjpfx Ap Ijc Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, denibbing, and edge breaking) or intermediate sanding of profiled window bars. Features Softdisc technology for visible surfaces as well as automatic profile and width adjustment. - 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm 1 top-mounted softdisc unit Ø=200mm, 0.75kW, 1 top-mounted lamella roller unit L=200mm, 0.75kW, 1 bottom-mounted softdisc unit Ø=200mm, 0.75kW, 1 bottom-mounted lamella roller unit L=200mm, 0.75kW, 2 side-mounted lamella roller units, 0.75kW each, L=120mm, D=200mm - All sanding units feature linear guidance via linear ball bearing sets on hardened shafts - Time-controlled dipping of all lamella roller units directly over the entering edges of the workpieces. This dipping allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable sanding lamella speed via frequency converters for adjusting the sanding intensity (separate for discs, wide rollers, and side rollers) - Disc units as Softdisc with hook-and-loop fastening for sanding discs (wood sanding) - Infeed via three lower and one upper conveyor belts and spring-loaded pressure rollers, with infinitely variable speed 4–15m/min - Touch panel adjustment of parameters: workpiece thickness, workpiece width (left side units individually), dipping depth of side units, spindle speed, feed speed - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width detection and profile recognition as well as automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically sequenced powered infeed roller, automatic clamping of the workpiece, and feeding after unit adjustment - Signal lights red/green for operation status indication - Shortest workpiece length: 380mm - Conveyor belt width: 200mm - Max. workpiece width: 180mm (260mm possible with flipping process) - Workpiece height: 12–160mm - Extraction ports: 4 x 100mm and 2 x 80mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price of the above machine on request! ----- Optional accessories (surcharge): Set of replacement lamella strips for Leistomat SD-200 consisting of Wide units: 30 strips EH45 / 200 - 7 (rollers) 30 strips EH45 / 200 - 20 (rollers) Rabbet units: 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid with 30 grooves 50mm long Set of replacement lamella strips for SmartFlex lamella disc consisting of 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc D=200mm, grit 220 with velour (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc D=200mm, grit 280 with velour (hook-and-loop), pack of 100 pcs. -----

Būklė: geras (naudotas), Gamybos metai: 1996, abišalinis viršaus-apačios šlifavimas su šlifavimo padu ir dulkių šepečiu maks. šlifavimo plotis 300 mm maks. šlifavimo aukštis 200 mm gamybos metai 1994 su CE ženklinimu Gujdpjxfl Eaefx Ap Ioc

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: 10229, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 25 000 h, galia: 13 kW (17,68 AG), įėjimo įtampa: 400 V, įėjimo srovė: 32 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, šlifavimo juostos plotis: 200 mm, šlifavimo juostos ilgis: 1 800 mm, šlifavimo aukštis: 190 mm, aukščio reguliavimo tipas: elektrinis, pavaros tipas: elektrinis, bendras aukštis: 1 890 mm, bendras ilgis: 2 070 mm, bendras plotis: 1 020 mm, bendras svoris: 1 500 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Įrenginys labai geros būklės, mažai naudotas, yra galimybė atnaujinimui pagal susitarimą. Gedpfx Apsyt Hkue Isuc

Būklė: naujas, Number of sanding units: 1 piece Profile width: 390 mm Maximum profile height: 390 mm LÖWER Timber Construction Sanding Machine HBS 400 ub Single-side belt sander, sanding from below, designed for the sanding of beams, glulam beams, and other bar-shaped wooden workpieces. Includes reversing operation for sanding in both directions (forward and backward), resulting in significant time savings when sanding workpieces on three or four sides. Constant working height allows for the use of roller conveyors in front of and behind the machine. Max. working width: 390 mm Workpiece thickness: 10 – 390 mm Abrasive belt: 420 x 1800 mm Pneumatically controlled abrasive belt oscillation Special abrasive belt drive motor: three-phase 7.5 kW with automatic star-delta start and counter-current brake Special sanding shoe system enables flat area sanding while adapting to workpiece tolerances via adjustable air pressure; time-controlled engagement of sanding shoe above incoming workpiece edge, adjustable by timer Workpiece feed via grippy conveyor belt driven by rubberized feed rollers Feed height controlled using a contactless sensor and pneumatic cylinder (independent of workpiece thickness) Feed speed approx. 10 m/min Feed unit mounted on a robust linear guide Emergency stop function when accessing the workpiece infeed, in case of sanding belt tear, door opening, or air pressure drop Extraction hood with connection diameter 2 x 150 mm Dimensions (L x W x H): 1400 x 1300 x 2000 mm Weight: 950 kg Voltage: 400 V, 50 Hz, 3-phase, Air pressure: 6 bar CE compliant Optional Accessories: ----- Heavy-duty roller conveyor HBS, 500 mm wide, 2 m long Ball-bearing support rollers, diameter 60 mm, zinc-coated steel tube with 12 mm spring axles, load capacity per roller 80 kg, roller spacing 250 mm, total roller width 500 mm, height-adjustable support feet per meter, conveyor height 850 mm +/- 60 mm Roller covers according to HBG (required for machines with automatic feed) Price: On request! LÖWER service, instruction flat rate Transport, commissioning and instruction (excluding electrical and extraction connection), flat rate Net price, without deduction Price: On request! Gusdsytx Ufepfx Ap Isc (Technical data as per manufacturer – no guarantee!)

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 290 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Robust top-quality design with long cast iron tables, brushing and finishing device, and conveyor belt feed. Suitable for high continuous loads even with higher material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad enables high material removal with a uniformly flat contact area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional accuracy - Auxiliary cooling of sanding zones for cooler sanding and longer abrasive belt lifespans - Forced-guide pneumatic belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom side) via precision lead screw with measurement display via dial ring (resolution 0.1mm) - Abrasive belt tensioning via pneumatic cylinder with constant clamping pressure - Quick abrasive belt change with pneumatic belt release in seconds - Adjustable belt tracking during changeover - Electro-pneumatic compressed air monitoring - Feed safety device via contact roller for excessively thick workpieces - Workpiece transport via calibrated slip-resistant and non-slip conveyor belts over heavy, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Continuously variable feed gear motor for rapid adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the infeed side - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s Gedpfx Apoyrty To Isuc - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 7.5 kW - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fiber brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE version ----- Price of the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece blow-off: - Arranged via nozzles above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off: - Via nozzles directly at the radii of the tension rollers, situated within the dust extraction, timer-controlled on/off, each 5 sec, can be switched on separately Disc unit ...

Būklė: naujas, Number of grinding units: 4 pcs Sanding width: 190 mm Max. sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single piece wood sanding machine with additional cross brushing unit (discs) and longitudinal brushing unit (roller) for sanding solid wood such as window scantlings, etc. Robust top-quality construction with long cast iron tables and conveyor belt feed. Suitable for heavy-duty continuous operation, even with higher material removal rates. 1. Belt sanding unit with CERMET sanding shoe for pre-sanding 2. Disc unit for cross sanding to remove fibers 3. Roller unit for longitudinal sanding to achieve a directed finish along the grain - Offset arrangement of sanding and finishing units above and below - Directly driven rubber-coated contact rollers for slip-free power transmission Gujdpfxjyrty Hs Ap Iec - Combined sanding via roller and shoe for high material removal rates with a flat engagement zone at the same time - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and increased belt life - Forced, pneumatically controlled belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at the tension rollers - Integrated brush sanding units (crosswise and lengthwise) with dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large-dimension linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment at the bottom via precision spindle with readout by scale ring (resolution 0.1 mm) - Sanding belt tension via pneumatic cylinder with constant tension - Sanding belt change with pneumatic belt relaxation in seconds - Adjustable belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece transport via calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feed - Continuously variable feed gear motor for fast adaptation to various wood types - All motors electrically protected - Ergonomically arranged operating controls at the infeed side - Digital thickness display (0.1 mm resolution) with a modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Belt length: 1800 mm - Belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units Disc D=max. 200 mm Roller D=max. 270 mm - Extraction connections: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm External dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant ----- Price of the above-mentioned machine upon request! ----- Optional accessories at an extra charge: Workpiece air blow-off - medium...

Būklė: geras (naudotas), Gamybos metai: 2010, mašinos/transporto priemonės numeris: 11176, Pasiūlymas 25439 Techniniai duomenys: - Šlifavimo priemonės skersmuo: 150 mm - Pasukama galvutė – šlifavimo agregatas sukamasis ir pasukamas ant lankstinės svirties - Dulkių stalčius - Disko greitis reguliuojamas be pakopų Gjdpfx Apoyapx Uj Ijuc - Stalo matmenys: 1400 x 980 mm - Stalo aukštis apie 870 mm - Pavaros galia: 400 V / 0,75 kW - Pneumatinė jungtis: 6 bar - Reikalinga vieta apie: P 1700 x A 1700 x G 1300 mm - Svoris apie 400 kg

Gamybos metai: 2008, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10999, OPIS Dvostrana brusilica / brusilica za obradu gornje i donje strane Proizvođač: Löwer Model: DSM 3000 Gedjv Dfp Hepfx Ap Isuc sa povratom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x jedinica za četkanje odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x jedinica za četkanje odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivi dovod, 6/11/16 m/min Pritisak vazduha: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 2–180 mm LÖWER Double-Sided Sanding Machine DSM 2000 ----- Double-sided single-piece wood sanding machine for processing solid wood such as window profiles, etc. Robust, heavy-duty design with long cast-iron tables, brushing and finishing attachments, and conveyor feed. Suitable for continuous heavy-duty operation even with high material removal rates. - Offset, top and bottom sanding and finishing units - Direct-driven, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad for high material removal and an even contact area - Maintenance-free and wear-free CERMET-coated sanding pads, featuring excellent thermal conductivity and dimensional stability - External cooling of sanding zones for cooler grinding and extended sanding belt life - Forced, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at sanding rollers; air-borne dust extraction at pressure rollers - Integrated brushing and finishing unit with large dust extraction system - Motorized sanding thickness adjustment via precision leadscrews and large-diameter linear ball bearing sets on case-hardened and ground precision shafts, featuring dust and dirt protection - Chip removal adjustment from below via precision leadscrew with indicator ring (resolution: 0.1 mm) - Sanding belt tensioning via pneumatic cylinder for constant tension - Quick-change sanding belts with pneumatic belt release in seconds - Sanding belt run can be adjusted when changing belts - Electro-pneumatic air pressure monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport on calibrated, non-slip, high-traction conveyor belts over heavy-duty, 1000 mm long cast-iron tables with finely planed surface, spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece feeding - Feed gear motor with three selectable feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls at the workpiece infeed side - Automatic workpiece thickness sensing (no pre-measurement required) - Digital thickness display (resolution: 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speeds: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brushing units with fiber brushes D 120 × 200 mm at 0.37 kW each - Extraction ports: 2 × 120 mm and 2 × 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm Gjdpfjvu Hdtex Ap Iouc - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3 phase - CE compliant ----- Base price of the machine on request! ----- Optional accessories at additional cost: Infinitely variable feed 4–20 m/min. for speed adjustment...

Būklė: naujas, Number of sanding units: 1 Gjdpoxmk Aysfx Ap Iouc Sanding width: 150 mm Maximum sanding height: 150 mm Löwer Edge Finishing Machine MiniSpin N ----- Machines for final and intermediate sanding of edges and profiles, featuring a sanding spindle that can be set horizontally or vertically. Motor: 0.75 kW Spindle in vertical position for processing edges Spindle in horizontal position, pivoted to the side, for processing longer profile rods, etc., or in combination with a combo sanding head for sanding edges with a flap disc Sanding head pivotable +/- 20° for processing angled edges Working height / width: 150 mm Max. roller/brush diameter: < 300 mm Frequency inverter for stepless spindle speed adjustment: 200 - 800 rpm Table size: 400 x 800 mm Two selectable rotation directions Operating voltage: 110 / 240 V, 50 / 60 Hz Extraction port: D=100 mm Weight: approx. 100 kg Including slotted base body D=180, L=150, fitted with Smartflex abrasive flaps CE version ----- Machine in the above specification available on request! ----- Optional accessories at extra cost: Additional combo sanding head for MiniSpin N: EUR 740.00 Consisting of a sanding disc D=180 mm with 20 slots and a sanding roller D=180 mm L=75 mm with 36 slots, fitted with SmartFlex abrasive flaps Combo sanding head for MiniSpin N instead of standard sanding head: Surcharge EUR 110.00 Consisting of a sanding disc D=180 mm with 20 slots and a sanding roller D=180 mm L=75 mm with 36 slots, fitted with SmartFlex abrasive flaps Additional standard sanding head: EUR 630.00 D=180 mm L=150 mm, fitted with SmartFlex abrasive flaps ----- (Technical data as per manufacturer's information - no liability accepted!)

Būklė: naudotas, Gamybos metai: 1975, with new feed belt Machine fully overhauled, excellent condition Machine cleaned, completely overhauled, adjusted, test run performed Table cleaned, aligned, adjusted Drive roller replaced Idler rollers cleaned Pressure rollers adjusted Sanding shoe fabricated New window installed in door Oscillation checked and adjusted used Manufacturer: Löwer Model: RSM 280 S Gjdpfjvwgczsx Ap Ieuc Year of manufacture: 1975 Machine no.: 3528 Number of belt units: 1 piece Motors: 5.5 HP Sanding width: approx. 140 / 150 mm Sanding height: approx. 120 mm Belt oscillation Belt blow-off device Feed speed: 6 / 11 / 16 m/min Belt length: approx. 1600 mm Belt width: approx. 160 mm Extraction connection: D 100 mm Required space (LxWxH): approx. 1400 x 1000 x 1600 mm Weight: approx. 650 kg Warehouse location: 97447 Gerolzhofen Sale in as-is condition as inspected without warranty or guarantee – free loading –

Būklė: naudotas, Gamybos metai: 1984, incl. various slotting and tenoning discs Used Manufacturer: Löwer Model: ZA 3000 Year of manufacture: 1984 Machine no.: 5485 Motor: 1.5 kW Electromotive brakes Number of spindles: 2 x vertical saw, horizontal milling spindle Clamping height: 200 mm Diameter: 40 mm Crosscut saw Table size: 800 mm x 350 mm Swivelling fence Stop ruler: 2000 mm, Festo LAS stop system Manual workpiece clamping Extraction port: 120 mm Gjdpfx Apsvwf I Ae Isuc Space requirements: approx. 1700 mm x 1700 mm x 1600 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-is condition, as inspected, without overhaul, without warranty or guarantee

Būklė: geras (naudotas), darbinis plotis: 1 350 mm, HESEEMANN LSM8 Gedexcg Scopfx Ap Ieuc

Būklė: naujas, Katalogo numeris: O222 PRIVALUMAI – šlifavimo ilgis 2600 mm – elektrinis stalo aukščio nustatymas – naujas įrenginys – garantija – CE sertifikatas TECHNINIAI DUOMENYS stalo matmenys: 2600x800 mm stalo pakėlimas: 570 mm skriemulio skersmuo: 250 mm elektrinis stalo aukščio nustatymas: 0,37 kW juostos greitis: 18 m/s Gedpfx Apezcviro Isuc šlifavimo juostos matmenys: 120 x 150 mm juostos ilgis: 7050 mm variklis: 3 kW ištraukimo antgalio skersmuo: 120 mm svoris: 400 kg PRODUKTO SAVYBĖS Ilgoji juostinė šlifavimo staklės Optimat SD 260 sukurtos mažesnių ir vidutinio dydžio detalių apdirbimui. Elektroniškai valdomas stalas žymiai padidina darbo tikslumą ir efektyvumą. Standartinė komplektacija: Elektrinis stalo aukščio nustatymas Ištraukimo jungtis Naudojimosi instrukcija Automatinis variklio stabdymas Apsaugos pagal standartus Avarinio išjungimo jungiklis ergonomiškoje vietoje Stalo elektroniniai ribotuvai Grynoji kaina: 21000 PLN Grynoji kaina: 5000 EUR Grynoji kaina apskaičiuota pagal kursą 4,2 PLN/EUR (kai esant didesniems kursų svyravimams, kaina gali keistis)

Būklė: labai geros būklės (naudotas), Katalogo numeris 7840 TECHNINIAI DUOMENYS - didžiausias apdirbamo elemento plotis: 630 mm - didžiausias apdirbamo elemento aukštis: 110 mm - 2 agregatai: 1) grioveliais padengtas guminis cilindras kalibravimui 2) grioveliais padengtas guminis cilindras kalibravimui + spaudimo batas + metalinis cilindras Gujdpfx Ajzcu N Dep Ijc - iš viršaus: - įvedimo metalinis slankiojantis volas - agregatas - metalinis slankiojantis volas - agregatas - metalinis slankiojantis volas - iš apačios: - 2 metaliniai slankiojantys volai - traukimo juosta - 2 metaliniai slankiojantys volai - pneumatiniu būdu osciliuojančios juostos - 2 padavimo greičiai - variklis 2×7,5 kW - elektrinis stalo pakėlimas - darbinis slėgis: 6-8 bar - dulkių nutraukimo antgalio diametras: 2x160 mm - bendri matmenys (ilgis/plotis/aukštis): 1650x1060x1970 mm - svoris: 972 kg PRIVALUMAI – pagaminta Lenkijoje – 2 agregatai – nenudažyta – labai gera būklė – naudota šlifuoklė Grynasis kaina: 20900 PLN Grynasis kaina: 4980 EUR pagal kursą 4,2 EUR (Kainos gali keistis dėl didesnių svyravimų)

Būklė: labai geros būklės (naudotas), Katalogo numeris: 7810 TECHNINIAI DUOMENYS Didžiausias apdirbamo elemento plotis: 630 mm Godpfx Aszcu Iaep Isuc Didžiausias apdirbamo elemento aukštis: 110 mm 2 agregatai: 1) Gumuotas grioveliuotas kalibravimo volas 2) Gumuotas grioveliuotas kalibravimo volas + batukas + metalinis volas *iš viršaus: Šlyties įvedimo metalinis volas Agregatas Šlyties metalinis volas Agregatas Šlyties, metalinis volas *iš apačios: 2 slydimo metaliniai volai Traukimo juosta 2 slydimo metaliniai volai Pneumatinė juostos osciliacija 2 padavimo greičiai Variklis: 2×7,5 kW Elektrinis stalo pakėlimas Darbinis slėgis: 6-8 bar Ištraukimo pajungimo skersmuo: 2x160 mm Bendri matmenys (ilgis/plotis/aukštis): 1650x1060x1970 mm Svoris: 972 kg – Pagaminta Lenkijoje – 2 agregatai – Nenudažyta – Labai gera būklė – Naudota šlifuoklė Grynoji kaina: 25 900 PLN Grynoji kaina: 6 160 EUR pagal kursą 4,2 EUR (Kainos gali kisti dėl reikšmingų svyravimų)