Dvipusis rėmo šlifavimo įrenginys

Löwer DSM 300

Sąlyga: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) Knsdpfsvu Hgbjx Ahwjd - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2018, Pagrindinis variklis Knodpfx Asw R E Imehwjd Veleno variklio galia: 11 kW Ši SCM DMC sd60 juostinė šlifuoklė pagaminta 2018 m. Darbinis plotis – 1 100 mm, apdirbamų ruošinių aukštis – nuo 4 iki 170 mm. Įrengta 15 kW pagrindiniu varikliu, darbinio judėjimo greitis 4,5/9 m/min. Papildomos ypatybės: guma dengtas kalibravimo volas, šlifavimo volas, kietas šlifavimo padas ir elektroninis valdymas tiksliam darbui. Apsvarstykite galimybę įsigyti šią SCM DMC sd60 juostinę šlifuoklę. Dėl daugiau informacijos susisiekite su mumis. Pritaikymo sritys Šlifavimas

Sąlyga: geras (naudotas), Gamybos metai: 1992, Single Piece Wood Sander Sanding top & bottom Electric height adjustment with digital display Continuously adjustable feed speed Star-delta start-up Pneumatic belt tensioning Main switch Sanding belt oscillation Top and bottom finishing brush unit, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Sanding belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction diameter: 2 x 180 mm Ksdpfx Ahewyda Ujwjnd Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed & outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Technical details and prior sale subject to change. • Stated prices are ex works (location) - loaded free of charge! • Machines have been cleaned and function-tested. • All machines are sold as seen without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Sąlyga: naudotas, Darbinis ilgis 3600 mm Darbinis plotis 1500 mm Darbinis aukštis apie 900 mm WEINIG grąžinimo sistema RF15 Naudojama po obliavimo, frezavimo ar šlifavimo staklių su maks. padavimo greičiu apie 22 m/min. Techninis aprašymas: Ruošinio ilgis: 250–3600 mm Ruošinio plotis: 30–230 mm Išilginis-skersinis-išilginis konvejeris su 2 integruotais varomaisiais ritinėlių takeliais: Kjdpfx Ahexpn Tnjwsnd Skersinio transportavimo kelias: 1.500 mm Pastovi transportavimo sparta: 30 m/min Ritinėlių tako ilgis: 2.200 mm Grąžinimo ritinėlių takas (nevaromas) operatoriui (techniniai duomenys pagal gamintoją – be garantijos!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Device description: - Top/bottom sanding - Working width: 200 mm - Electrically adjustable upper unit Ksdpfx Ajwyb Ntshwjnd - Star-delta starter - Installed power: 14 kW - Pneumatic belt tensioning - Belt oscillation - Working height up to 150 mm

Gamybos metai: 2008, Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 10999, OPIS Dvostrana brusilica / brusilica za obradu gornje i donje strane Proizvođač: Löwer Model: DSM 3000 sa povratom obratka Bthgq0Ygu0 Radna širina: 290 mm Debljina brušenja: 2-200 mm Najkraća dužina obratka: cca 320 mm Opremljena sa: 1x brusna jedinica odozgo, 7,5 kW 1x jedinica za četkanje odozgo, 0,37 kW 1x brusna jedinica odozdo, 7,5 kW 1x jedinica za četkanje odozdo, 0,37 kW Dimenzije brusne trake: 300 x 1800 mm Električno podešavanje visine, 0,37 kW Podesivi dovod, 6/11/16 m/min Knjdpfx Ahsv Dfp Hjwsd Pritisak vazduha: 6-8 bara Dimenzije cca 2700 x 1100 x 1900 mm Težina cca 1600 kg

Sąlyga: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change Knsdpfx Asvnv Tqshwod - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Sąlyga: naudotas, Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ... Ksdpfxev D Rg Do Ahwond

Sąlyga: paruoštas naudoti (naudotas), Caractéristiques techniques Châssis en fonte Volant d'inertie solide diamètre 930 mm Hauteur de coupe max. : 550 mm Largeur de coupe max. : 910 mm Dimensions de la lame : 6580 à 6670 x 90 x 0,9 mm Guide-lame Dimensions de la table en fonte : 860 x 1100 mm Inclinaison de la table : 0 à 20 degrés Moteur 11 kW (15 CV) Machine robuste et carénée 2 buses d'aspiration diamètre : 140 mm Avanceur à rouleau denté en acier Énergie et Moteurs Tension : 400 V Branchement : Triphasé Puissance : 12 kW Moteur : 15 CV Dimensions hors tout Longueur : 1880 mm Hauteur : 2860 mm Knjdpfx Ajupbn Sjhwod Poids : 990 kg

Sąlyga: naudotas, Išvedimas – Automatizavimas, Weinig RF15 tipo grąžinimo sistema, skirta automatiniam ruošinio kaupimui ir nuolatiniam grąžinimui operatoriui. Ruošinio ilgis: 250 – 3 500 mm Ruošinio plotis: 30 – 230 mm Padvėjimas: maks. 22 m/min Kodpfew Uidasx Ahwsnd