Šlifavimo staklės Löwer FA 4 S

Löwer FA 4 S

Sąlyga: reikia remonto (naudotas), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 PLATEN THICKNESS 150 mm Iedpfxjn R Dihs Af Ioal Configuration - LOADER - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 PLATEN THICKNESS 150 mm - UNPOWERED ROLLER UNLOADER, 3000x1300 mm Press platen dimensions: 3000x1300 mm Pressing cylinders: No. 6, Ø 70 mm, stroke 200 mm Pressing force: 70 tons

Sąlyga: naudotas, Thread rolling machine - thread rolling machine ORT RP18, 2-roller Shaft diameter 69.95 mm See video The machine is located at our warehouse in Gussago (BS), under power Iajdpfx Afst Apuge Ijl Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without material removal, which can be performed cold or hot. The main purpose is to improve surface quality (and thus the fatigue behavior).

Sąlyga: naudotas, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for single parts with rinse cycle. ----- Function features: Machine for horizontal flooding of single parts. The product is applied via a row of nozzles. Excess product is blown off by air jets. The pump and the air jets are automatically controlled and are only activated when a workpiece is passing through. This reduces compressed air consumption. The recirculation mode ensures minimal product usage. ----- Construction features: Structure Robust steel frame, painted with high-strength, water-soluble products. Machine body made of thick, hot-welded polypropylene panels. 4 independent chambers for infeed, flooding, blowing, and outfeed. Horizontal workpiece feed Via motor-driven grooved plastic rollers. Electric inverter for adjusting and changing the feed speed. Transmission The machine is equipped with an exclusive system that positions all transmission components outside the flooding chamber for easy operator access, ensuring longer operating life and facilitating maintenance operations. Moving components are protected by covers and appropriate seals. Recirculation pump Pneumatic double diaphragm pump with valves, seals, and diaphragms made of nitrile rubber, and a housing made of plastic material (PVDF). Air jets The first chamber features an air-blow system to prevent product leakage. A second air-blow system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for setting the feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3–6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be impregnated mm 250 Max. width of workpieces to be impregnated mm 300 Max. height of workpieces to be impregnated mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinse circuit for Pro Flow ----- Price of the above machine: on request! Iaedpfx Ajnl Nqqsf Ijl Plus packaging and transport ----- (Technical specifications as per manufacturer – without guarantee! Illustrations may differ from the original, prices net, plus VAT (domestic))

Sąlyga: paruoštas naudoti (naudotas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Isdpfx Aem Habdjf Ieal

Sąlyga: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation Isdpfxevu Hgbe Af Isal - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Sąlyga: naudotas, Crosscut Saw 3 kW Spindle Diameter: 50 mm Spindle Length: 300 mm Number of Tool Sets: variable Control: CNC Dimensions (L x W x H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Grooving Machine FZS-2 Electronic, with stepless grooving spindles and automatic roller table ----- Crosscut Saw ----- Spindle arrangement: top Three-phase motor 3 kW Spindle diameter: 30 mm Speed: 2800 RPM Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm diameter extraction port 2 grooving spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4200 RPM Spindle diameter: 50 mm Tool diameter: approx. 360 mm Usable length: 300 mm * Both grooving spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm diameter extraction port * Automatic brake with speed monitoring Swivel Table ----- * Swivel range: +/- 65° * Automatically changing counter block (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter block in the cutting plane at every angle setting Special Equipment ----- Steplessly adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2500 mm Extraction port diameters: 2 x 180 mm for grooving spindles Iaedpfewgwlkox Af Iol 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine on request! ----- Images show the same model. Original images not yet available. (Technical data as per manufacturer's information - no guarantee!) All prices are net, plus statutory VAT.

Sąlyga: labai geros būklės (naudotas), Self-loading press for laminated wood Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated by oil up to 130°C Upper pressure force: 57 t Iasdpsv Nhx Uefx Af Isl Side pressure force: 9 t Year of manufacture: 2001 CE certificate

Sąlyga: geras (naudotas), Obel Pedersen high-frequency through-feed belt press, Opel-Pedersen press type 2412. Pressing length 2,500 mm, width 600 mm. Comes with gluing station, feed table, HF generator T20 V, and water cooling. The system has been dismantled. Iaodpfx Afedybr Ro Iol

Sąlyga: visiškai atnaujintas (naudotas), Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Overhauled - new Siemens PLC See video The machine is in our warehouse in Gussago BS, powered up Test run possible Iaodpfx Aovxa Dbjf Iol Mimu Machine Tools Thread rolling is a chipless mechanical process that can be performed either cold or hot, with the aim of improving surface finish (and thus fatigue resistance).

Sąlyga: nepatikrintas (naudotas), Sanding belt length: 2280 mm Sanding belt width: 140 mm Iaedpfx Afovrzcle Iel Motor: 2.2 kW Table length: 1000 mm Cylindrical grinding attachment Extraction fan Mobile base