RF spaudos

Obel Pedersen

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Bsdpfxsw Sy T He Agiecw Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: naudotas, Chipping rundvirke: 100–150 m³/t Flising av småved og avfall: 50–100 m³/t Vekt: 3165 kg Maks. stokkdiameter: 254 mm Bcedpohclffefx Agijw Söderhamn Eriksson 670-56 CC flishogger med elektrisk motor. Söderhamn Eriksson 670-56-flishoggeren er beregnet for produksjon av flis til tremasse, fiberplater og sponplater. Både rundvirke og sagbruksavfall kan benyttes som råstoff. Flishogger 670-56 mater horisontalt, i en vinkel på 37,5 grader mot fiberretningen. Flis av jevn og høy kvalitet kan enten ledes ut i bunnen eller blåses rett opp. Bli en av de sagbruksbedriftene som forvalter ressursene sine på en smart måte.

Sąlyga: paruoštas naudoti (naudotas), For turning plates, discs, or bowls up to 250 mm Ø. Bedpfx Agsrh Hntsiscw Machine with vacuum clamping.

Sąlyga: naujas, Gamybos metai: 2024, Magnetic separator for chip conveyor line Tube magnet with 4 magnetic plates (permanent magnet) Bcsdjcqvhwopfx Agiew Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: naudotas, Gamybos metai: 2011, veikimo valandos: 26 920 h, IRB 6640-235/2.55 Year of manufacture: 2011 We are also pleased to offer this robot fully reconditioned upon request! Bcodpeim Si Aefx Agijw For further information, please do not hesitate to contact us!

Sąlyga: labai geros būklės (naudotas), Gold-anodized plates Working dimensions: 2.5 × 1.1 m Electric heating Fully functional, tested You can call or write to us. We can communicate in German and Russian, both spoken and written. You may also send messages in English. Bcsdpfju I N D Hjx Agiow 31.3.5

Sąlyga: naujas, Gamybos metai: 2023, galia: 7 kW (9,52 AG), obliavimo plotis: 520 mm, peilių skaičius: 4, bendras svoris: 483 kg, aukščio reguliavimo tipas: elektrinis, obliaus veleno skersmuo: 120 mm, obliavimo aukštis: 240 mm, Thickness Planer SCM MiniMax s 52es Specification: • Condition - new • Manufacturer - SCM • Planer table width - 520 mm • Planer table length - 850 mm • Minimum workpiece thickness - 3 mm • Maximum workpiece thickness - 240 mm • Maximum planer cutting depth - 5 mm • Motor power - 7 kW • Supply voltage - 400 V • Cutterblock with 4 traditional knives • Cutterblock diameter - 120 mm • Cutterblock rotational speed - 5000 rpm • Max planing width - 520 mm • Feed speed - 5 / 8 / 12 / 18 m/min Bjdpfxoqu U Dns Agiocw • Extraction port diameter - 120 mm • Net weight approx. 493 kg • Overall dimensions - 144 x 108 x 110 cm (W x L x H) Additional Information: • The machine is brand new • The displayed photos show the actual condition of the item for sale • Possibility to connect and test the machine on site • The price listed in the auction does not include VAT or transport costs • Available immediately from stock in Italy

Gamybos metai: 1999, Sąlyga: labai geros būklės (naudotas), Manufacturer: VANGROENWEGHE Model/Type: M-300 Year of Manufacture: 1999 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Self-collection Delivery Costs: Borne by the Customer Commissioning Type: To be agreed Bcsdpfx Ajd Nmdksgiew Description: Notes: Manufacturer: VANGROENWEGHE Model/Type: TYPE F-300-COMBI/CE Year of Manufacture: 1998 Machine Category: Through-Feed Sander Location: Gorzów Wlkp. Delivery Terms: Delivery costs borne by the customer Commissioning Type: To be agreed Through-feed Sander VG TYPE F-300-COMBI-CE / 1998 High-performance Combi unit machine Contact roller and pad sanding Pneumatic oscillation and mechanical belt tensioning Motors: 7.5 + 1 HP / 380 V Abrasive belt dimensions: 300 x 1,900 mm

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 4/14242, Frank floor sanding machine FSR, used Bsdpfxeb Auu Ro Agijcw Motor power: 0.75 kW Voltage: 230 Volts 5 Amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex stock Bitburg

Sąlyga: naudotas, Gamybos metai: 2010, Chalet Construction Machine Used, good condition, low operating hours Manufacturer: Krüsi Model: CMI 40 Year of manufacture: 2010 CE type tested Up to 140 mm round timber corner joints Bsdpfx Aovwfqqsgiocw Saw: 1x Drilling: 1x Milling: 3x Workpiece height: 200 mm Workpiece width: 250 mm Weight: approx. 2,200 kg Total connected load: approx. kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee