Hidralmac Giluminio Traukimo Presas pirkti naudotą (8 550)

Būklė: naudotas, Single-column hydraulic press with drawing cushion RÖCHER Type REP 100.01 SZ Hydraulic drawing press Machine no. 15,499 Year of manufacture: 2003 Press force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table area: 850 x 700 mm with drop-through hole Ø 150 mm Ram area: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Drawing cushion force: 40 tons (400 kN) Drawing cushion stroke: 200 mm Drawing cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec Table height above floor: 910 mm Hydraulic operating pressure max. 300 bar Hydraulic tank capacity: 700 liters Rapid approach speed: approx. 400 mm/sec Press speed up to 23.8 tons (238 kN): 5 to 68 mm/sec Press speed up to 100 tons (1000 kN): 5 to 16 mm/sec Return speed: 50 to 400 mm/sec Lhjdoyupulopfx Ah Usg Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC - Ram stroke and press force programmable via control system - Drawing cushion with drawing and ejector function - Drawing cushion force infinitely adjustable - Ram and drawing cushion equipped with direct travel measuring system - Drawing cushion can be extended and retracted under the press area, suitable for punching applications using the drop-through hole - Floor-level installation, drawing cushion does not go below ground level - Pressure and travel shut-off - Fixed stop with indirect measuring system - Pressure holding time infinitely programmable - Table area with holes for drawing cushion ram rods - Ram with ejector - Stroke damping - Stroke release via two-hand operation, foot switch, hand lever, and button on control panel - LEUZE light barrier as reach-in protection for safe operation - Front mirror columns at the press table laterally adjustable - Electrical control cabinet mounted on the machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose lines for tool tempering or cooling at the ram - Piece counter in the control system - 306 recorded operating hours - Operating manual, hydraulic diagram and electrical diagram available Space requirement for press L x W x H: 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good, as-new condition

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 200 t, eigos ilgis: 800 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, tarpas tarp stulpų: 1 000 mm, atitraukimo jėga: 70 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 200 / 70 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 200 / 70 ton four-column hydraulic deep drawing press is a high-rigidity, four-column hydraulic press solution designed for metal drawing, deep drawing, and precision pressing applications. The St52 quality steel construction body undergoes stress relief by vibration method, which ensures high parallelism and perpendicularity tolerances are maintained during prolonged operation. The ram and cushion systems operate independently; stroke and pressure can be precisely adjusted via a touch panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 efficiency class motor, and PLC control, it delivers high performance and reliable operation. The automatic lubrication system and electronic filter contamination alerts help minimize maintenance requirements. With a capacity of 200 / 70 tons, this model is the ideal industrial press solution for medium- and heavy-duty metal drawing, deep drawing, and die applications. Key Advantages Lodpfxox N Umqj Ah Ujhg - High rigidity four-column press body - Independent stroke and tonnage adjustment for ram and cushion - Full control via touch panel - High precision and repeatability - Long service life and low maintenance Fields of Application - Metal drawing operations - Deep drawing applications - Die testing and production lines - Auxiliary pressing operations ⚙️ STANDARD AND TECHNICAL FEATURES TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 – 4 pcs induction-hardened, chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 200 Ton CAPACITY (CUSHION): 70 Ton DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. DAYLIGHT OPENING: 100 mm MAX. DAYLIGHT OPENING: 900 mm STRESS RELIEF: Vibration WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE RAPID DESCENT: 150 mm/s DRAWING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 320 mm – Ck45 CUSHION CYLINDER BORE: Ø 190 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 pcs APPROXIMATE MACHINE DIMENSIONS: 4000 × 1450 × 1450 mm TABLE HEIGHT FROM FLOOR: 1300 mm MAIN FILLING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” ELECTRICAL COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 14.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, spaudimo jėga: 400 t, HIDRALMAC Four-Column Press – 400 t – 2,500 × 1,600 mm – Deep Drawing Press with Cushion For sale is a hydraulic four-column press (deep drawing press) from HIDRALMAC with a pressing force of up to 400 t. This machine is specifically designed for demanding deep drawing and forming processes, featuring a high-performance drawing cushion as well as state-of-the-art control and safety systems. Thanks to its robust construction and extensive equipment, it is ideally suited for industrial series production and complex forming tasks. ==== Technical Data & Information: Hydraulic Four-Column Press – Deep Drawing Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Four-Column Press - Machine designation: Deep Drawing Press - Design: Four-Column Press - Pressing force: 50–400 t (adjustable) - Machine weight: approx. 27.5 t - Dimensions (L × W × H): approx. 3,950 × 2,200 × 4,850 mm - Main cylinders: 2 units ==== Working Area - Clearance width: 2,500 mm Lhodpfsin Et Njx Ah Ueg - Installation height: 1,300 mm - Stroke: 900 mm - Table height above floor: approx. 900 mm ==== Table & Ram - Table size: 2,500 × 1,600 mm - Ram size: 3,100 × 1,600 mm - Column diameter: 220 mm - Return force: 40 t - T-slots: DIN 650-22 (custom configurations possible) ==== Speeds - Approach speed: 200 mm/sec - Return speed: 200 mm/sec - Working speed: 5–15 mm/sec ==== Drawing Unit - Drawing cushion: 1,400 × 800 mm - Drawing cushion force: 30–60 t - Drawing cushion stroke: 250 mm - Drawing cushion speed: 5–80 mm/sec ==== Hydraulics & Power - Total power requirement: 62 kW - Oil tank: 1,500 l - Oil capacity: 1,200 l - Hydraulic components: Bosch Rexroth - Pressure buildup: up to 400 t within max. 4 seconds - Pressure control: adjustable via monitor ==== Control & Operation - Control: Siemens - Monitor: Siemens 12" - Operating modes: manual, semi-automatic, fully automatic - Travel distance control adjustable via monitor - Remote maintenance (remote access) - Two-hand operation on movable stand - Electrical control cabinet for wall mounting ==== Safety & Equipment - Safety PLC for hydraulic block monitoring - Front and rear light sensors: SICK (1,300 mm) - Side guards left and right (each 1,000 × 800 mm) - Interior LED lighting - Energy control system (idle consumption reduced to approx. 2 kW) ==== Construction - Robust welded construction - ASTM A36 structural steel - Induction-hardened and chrome-plated piston rods - Low-maintenance and reliable - CE certificate - Documentation in German ===== Deep drawing, forming technology, series production, sheet metal forming, tool making Hydraulic press, deep drawing press, four-column press, forming press, industrial press, production press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our key strength lies in special purpose machinery construction and press automation. We offer custom-built hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we predominantly use components from leading European manufacturers.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 100/40 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guide Rails General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guide H-frame structure provides maximum rigidity during the pressing cycle; parallelism and perpendicularity tolerances are stably maintained throughout the stroke. The CHSP 100/40 model, featuring a 100-ton main ram and a 40-ton lower cushion (pot) capacity, is engineered for precise deep drawing and spinning operations. The frame construction is stress relieved by vibration, ensuring long lifespan and reliable operation. ⚙️ Standard Equipment - Steel construction, H-frame type with 8 slide guides - Stress-relieved frame structure by vibration - Bronze Zr14 slide guide bushings - WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 100/40 - Type: Steel construction, H-frame type with 8 slide guides - Frame Material: St52 – ERDEMİR - Slide Guide Bushings: Bronze Zr14 - Capacity (Ram): 100 Ton - Capacity (Cushion): 40 Ton - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS approved, accredited by TÜRK-AK EN ISO 15614-1:2017 (Supervised by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 11 kW – IE3 - Main Pump: 22 cm³ – REXROTH or PARKER - Moving Table Rapid Down Speed: 150 mm/s - Moving Table Drawing Speed: 12 mm/s - Moving Table Return Speed: 170 mm/s - Cushion Advance Speed: 30 mm/s Lodsx N T Uyepfx Ah Ushg - Main Cylinder Bore: Ø230 mm – Ck45 - Cushion Cylinder Bore: Ø140 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 3400 mm - Approximate Width: 2950 mm - Approximate Depth: 2000 mm - Bottom Table Height from Floor: 1250 mm - Pre-fill Valve: NG 100 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Scale: NOVATECHNIK or TURCK - PLC Application: DELTA - Touch Panel Screen: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 1 000 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 150 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 400/150 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and stamping applications. Thanks to the 8-guide H-frame design, maximum rigidity is maintained during the pressing operation, while parallelism and perpendicularity tolerances are stably preserved throughout the long stroke. The CHSP 400/150 model, featuring a 400-ton main ram and a 150-ton blankholder (cushion) capacity, is designed for deep drawing and stamping applications requiring high tonnage. The machine frame is stress-relieved via vibration to guarantee durable and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guide H-frame press body - Stress-relieved frame structure via vibration - Bronze Zr14 slide bearings - WPQR and WPS approved welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically controlled filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 400/150 - Type: Steel construction, 8-guide H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 400 Ton - Capacity (Cushion): 150 Ton - Moving Table Dimensions: 1200 × 1500 mm - Fixed Table Dimensions: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Stroke (Cushion): 350 mm - Min. Clear Opening: 100 mm - Max. Clear Opening: 1100 mm - Weld Stress Relief: Vibration-based stress relieving - Welding Application: WPQR and WPS approved, TÜRK-AK accredited - EN ISO 15614-1/2017 - (Welding applications are supervised by "welding coordination engineers" certified per EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Inner Diameter: Ø450 mm – Ck45 - Cushion Cylinder Inner Diameter: Ø280 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Machine Height: 5600 mm - Approximate Machine Width: 3250 mm - Approximate Machine Depth: 2200 mm - Height of Lower Table from Floor: 1400 mm - Pre-fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER Lhsdpfex N Uhhsx Ah Usg - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 24 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 60 t, eigos ilgis: 400 mm, stalo plotis: 700 mm, stalo ilgis: 700 mm, tarpas tarp stulpų: 700 mm, atitraukimo jėga: 20 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic deep drawing press is a robust and compact press solution designed for precise metal forming, deep drawing, and flow forming applications. Its four-column construction ensures consistent parallelism and perpendicularity tolerances throughout the pressing process. The frame, manufactured from St52 grade steel, undergoes stress-relief via vibration. Slide and pot systems can be controlled independently, and stroke and pressure settings can be precisely adjusted via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and an automatic lubrication system, the press offers durable, safe, and efficient operation. Its PLC-controlled structure minimizes operator errors. This model is an ideal solution for small and medium-scale flow forming, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Four-column rigid press frame structure - Independent stroke and tonnage control for slide and pot - System adjustable via touchscreen panel - High precision and repeatability - Low maintenance requirements, extended service life Areas of Use - Metal flow forming applications - Deep drawing operations - Die testing and prototype manufacturing Lhjdpfox N Ulgex Ah Ueg - Metalworking and auxiliary production lines ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. Induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (SLIDE): 60 Tons CAPACITY (POT): 20 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 microns/meter PERPENDICULARITY TOLERANCE: 60 microns/meter STROKE (SLIDE): 400 mm STROKE (POT): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELDING STRESS RELIEF: Vibration stress-relief WELDING PROCEDURE: WPQR and WPS certified by TÜRK-AK in compliance with EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER SLIDE FAST DESCENT SPEED: 150 mm/sec SLIDE FLOW FORMING SPEED: 12 mm/sec SLIDE RETURN SPEED: 170 mm/sec POT TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER INNER DIAMETER: Ø 175 mm – Ck45 POT CYLINDER INNER DIAMETER: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3100 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1000 mm PRIMARY FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) SLIDE / POT STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 800 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 000 mm, tarpas tarp stulpų: 1 000 mm, atitraukimo jėga: 80 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 250 / 80 TON FOUR-POST HYDRAULIC DRAWING PRESS General Description The CRONOSSTECH 250 / 80 ton four-post hydraulic drawing press is a high-rigidity, four-post hydraulic press solution designed for metal forming, deep drawing, and precision press applications. The ST52 quality steel welded frame undergoes stress relief through a vibration method, ensuring excellent parallelism and perpendicularity tolerances are maintained during prolonged operation. The ram and cushion systems operate independently, with stroke and pressure settings precisely adjustable via the touch panel interface. Lhodpfex N Um Rsx Ah Usg Utilizing REXROTH or PARKER hydraulic components, IE3 motor class, and PLC-controlled architecture, this press offers high efficiency and reliable operation. The automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With its 250 / 80 ton capacity, this model is the ideal industrial press solution for medium to heavy-duty metal forming, deep drawing, and die applications. Key Benefits - High-rigidity four-post press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Durable design with low maintenance requirements Areas of Application - Metal forming operations - Deep drawing processes - Die trial and production lines - Auxiliary pressing processes ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-post FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs, induction hardened and chrome-plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 250 Tons CAPACITY (CUSHION): 80 Tons DISTANCE BETWEEN COLUMNS: 1000 × 1000 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 800 mm STROKE (CUSHION): 200 mm MIN. OPENING: 100 mm MAX. OPENING: 900 mm WELD STRESS RELIEF: By vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 22 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVING TABLE FAST DESCENT: 150 mm/s DRAWING SPEED: 12 mm/s RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER INNER DIAMETER: Ø 360 mm – Ck45 CUSHION CYLINDER INNER DIAMETER: Ø 200 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS DIMENSIONS: 4000 × 1450 × 1450 mm DIE TABLE HEIGHT FROM FLOOR: 1300 mm MAIN FILLING VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER PLC: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 16 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 50 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting mechanism to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure delivers maximum rigidity throughout the pressing process, maintaining stable parallelism and perpendicularity tolerances along the stroke. The CHSP 150/50 model features a 150-ton main ram and a 50-ton blank holder ram (cushion), specifically designed for precise and repeatable deep drawing operations. The frame construction is stress-relieved by vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction H-frame body with 8 slider guides - Vibration stress-relieved frame design - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited inspector (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion force (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display for monitoring hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 150/50 - Type: Steel construction H-frame with 8 slider guides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Main Ram Capacity: 150 tons - Cushion Capacity: 50 tons - Moving Table Size: 1000 × 1200 mm Lsdpfx Ahjx N T U He Uehg - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration - Welding Procedure: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 (All welding operations supervised by certified Welding Coordination Engineers in accordance with EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 18.5 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/sec - Spinning Speed of Moving Table: 12 mm/sec - Return Speed of Moving Table: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø280 mm – Ck45 - Cushion Cylinder Bore: Ø160 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 3650 mm - Approximate Press Width: 2950 mm - Approximate Press Depth: 2000 mm - Fixed Table Height from Floor: 1250 mm - Main Pre-Fill Valve: NG 100 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Sensor: NOVATECHNIK or TURCK - PLC Control: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 11 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 270 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed based on the double-acting (ram + blankholder) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides high rigidity, stable parallelism, and an extended die life even with large table dimensions during the pressing process. The CHSP 800/270 model, featuring 800 tons main ram and 270 tons blankholder capacity, has been developed for processes requiring controlled material flow, especially in automotive, white goods, defense industries, and heavy sheet metal forming applications. The vibration stress-relieved steel construction frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment Lhsdpjx N Uh Ujfx Ah Ueg • Steel construction, 8-slide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical switch gear • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushing: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Blankholder): 270 Tons Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Blankholder): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touchscreen Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 800 mm, stalo ilgis: 2 600 mm, atitraukimo jėga: 800 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses have been developed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blank holder force. The 8-guided H-frame body structure ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over long strokes. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies, with a 2500-ton main ram and an 800-ton blank holder capacity. The stress-relieved steel construction body (vibration treated) is designed for robust and reliable long-term use in heavy industry environments. ⚙️ Standard Equipment • Steel construction, H-frame body type with 8 slideways • Vibration stress-relieved frame construction • Bronze Zr14 slideway bearings • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Lhedpfxjx N Uk As Ah Ueg Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 100/40 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial solution with a rigid four-column body structure, engineered for metal forming, deep drawing, and precision pressing applications. The frame is fabricated from St52 quality steel and subjected to stress relief treatment by vibratory methods. This design ensures high parallelism and perpendicularity tolerances are maintained over prolonged periods. The ram and cushion systems operate independently; stroke and pressure settings are precisely controlled via touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is an ideal solution for medium-scale serial production, die trial runs, and precision forming operations. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Applications - Metal spinning and forming operations - Deep drawing applications - Die trial runs and prototype production - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 tons CAPACITY (CUSHION): 40 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Via vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE DIAMETER: Ø 230 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFO: Viewable via display DIE MEMORY: Adjustable from screen LINEAR DISTANCE ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 tons Ljdpjx N Ulyefx Ah Ujhg Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 80 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides Lsdpfx Ahex N Uaqo Uehg General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal spinning applications. The 8-gib H-frame design provides maximum rigidity during pressing operations, while parallelism and perpendicularity tolerances are steadily maintained throughout the stroke. The CHSP 250/80 model—with 250-ton main ram and 80-ton blankholder (cushion) capacity—is intended for medium- to high-tonnage deep drawing and spinning operations. The machine frame is stress-relieved via vibration for long-term durability and reliable operation. ⚙️ Standard Equipment - Welded steel construction, 8-gib H-frame press body - Vibratory stress-relieved frame structure - Bronze Zr14 gib slideways - Weld seam applications approved according to WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 - Type: Welded steel, 8-gib H-frame press body - Frame Material: St52 – ERDEMİR - Gib Slideways: Bronze Zr14 - Capacity (Ram): 250 tons - Capacity (Cushion): 80 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Weld Application: WPQR and WPS certified by TÜRK-AK, approved according to EN ISO 15614-1/2017. Weld operations are overseen by certified “welding coordination engineers” per EN ISO 14731. - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/s - Drawing Speed of Moving Table: 12 mm/s - Return Speed of Moving Table: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Charge Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Measuring Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 600 t, eigos ilgis: 1 000 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 200 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 600/200 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Gibbed General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting working principle to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure delivers maximum rigidity throughout the pressing process; parallelism and perpendicularity tolerances are consistently maintained over long strokes. The CHSP 600/200 model, featuring a 600-ton main ram and a 200-ton lower cushion ram (pot) capacity, is designed to provide full control over tooling and parts during high-tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration for reliable, long-lasting operation. ⚙️ Standard Equipment - Welded steel construction, H-frame type with 8 slideways - Stress-relieved frame structure via vibration - Bronze Zr14 slideway bushings - WPQR and WPS certified welding, approved by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable stroke for both ram and cushion (pot) - Adjustable tonnage (pressure) control for ram and cushion - Automatic lubrication system - Electronic filter pollution indicator - Oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHSP 600/200 - Type: Welded steel H-frame, 8-guided - Frame Material: St52 – ERDEMİR - Gib Bushing: Bronze Zr14 - Capacity (Main Ram): 600 Tons - Capacity (Pot): 200 Tons Lhedpfjx N Uhzox Ah Usg - Movable Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 microns/m - Perpendicularity Tolerance: 60 microns/m - Stroke (Ram): 1000 mm - Stroke (Pot): 350 mm - Min. Daylight: 100 mm - Max. Daylight: 1100 mm - Frame Stress Relief: By vibration - Welding Process: WPQR and WPS accredited by TÜRK-AK (EN ISO 15614-1/2017) (Certified welding coordination engineers supervise processes in line with EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 55 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Drawing Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Pot Table Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø550 mm – Ck45 - Cushion Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approximate Height: 5900 mm - Approximate Width: 3250 mm - Approximate Depth: 2300 mm - Lower Table Height from Floor: 1400 mm - Pre-Fill Valve: NG 150 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 35 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 350 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1000/350 H Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting (ram + cushion) system architecture for heavy-duty metal forming, deep drawing, and stamping applications. Thanks to its 8-guided H-frame structure, high rigidity is maintained throughout the pressing process, and parallelism and perpendicularity tolerances are stably preserved even with large table dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and a 350-ton die cushion capacity, is specifically designed for deep drawing operations requiring controlled material flow, especially in the automotive, white goods, defense, and heavy industries. The steel construction frame is stress-relieved by vibration, providing long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning control • Monitoring of hydraulic oil temperature and system status on display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Cushion): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Lsdpfsx N Uiljx Ah Uehg Main Cylinder: Ø500 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 200 t, eigos ilgis: 800 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 70 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed using a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guided H-frame construction, the press provides maximum rigidity during operation, and parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton lower cushion (pot), is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration method, aiming for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bushings - Welded structure with WPQR and WPS approval by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bushings: Bronze Zr14 - Capacity (Ram): 200 Tons - Capacity (Cushion): 70 Tons - Moving Table Dimensions: 1000 × 1200 mm - Fixed Table Dimensions: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Weld Stress Relief: Vibratory stress relief - Welding Application: WPQR and WPS approved by TÜRK-AK accredited supervisors, EN ISO 15614-1/2017 (Welding applications are overseen by certified "welding coordination engineers" according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 22 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec Lsdsx N T U Topfx Ah Uehg - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore Diameter: Ø320 mm – Ck45 - Cushion Cylinder Bore Diameter: Ø190 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 3800 mm - Approx. Press Width: 2950 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 175 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Cupping) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and cupping operations. Thanks to the 8-guided H-frame body structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently preserved throughout the long stroke. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton cushion (blank holder) capacity, is designed to provide absolute control over the die and workpiece during high-tonnage deep drawing and cupping operations. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved body structure - Bronze Zr14 slideway bearings - WPQR and WPS welding procedures approved and accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Cushion Cylinder Inner Diameter: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5800 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Lhsdpfx Ahox N Uhue Ujg Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 200 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 400 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1200/400 H-Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic stamping and deep drawing presses are engineered to deliver maximum rigidity, precision, and process control in sheet metal forming applications requiring high tonnage. The 8-guided H-frame body structure ensures stable maintenance of parallelism and squareness tolerances, even on large bed sizes. The CHSP 1200/400 model, with a 1200-ton main ram and 400-ton blankholder capacity, is tailored for heavy industry applications that require deep drawing, stamping, and controlled material flow. Its vibration stress-relieved welded steel frame offers durable and reliable performance for long-term operation. ⚙️ Standard Equipment • Steel construction, 8-guided H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slideway bearings • Welding applications certified by WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touch panel screen • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system Ljdpfxsx N Uirj Ah Ushg • Electronic filter contamination alert • Real-time monitoring of hydraulic oil temperature and system status on screen • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER electrical components • Industrial safety equipment for operator protection 📐 Technical Specifications – CHSP 1200/400 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 1200 Tons Capacity (Blankholder): 400 Tons Moving / Fixed Bed: 1500 × 2000 mm Parallelism / Squareness: 120 / 60 micron/m Stroke (Ram / Blankholder): 1000 / 350 mm Daylight (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø560 mm – Ck45 (2 pcs) Blankholder Cylinder: Ø450 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 75 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, atitraukimo jėga: 600 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 2000/600 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered for heavy-duty deep drawing applications requiring very high tonnage, large table dimensions, and precision-controlled blankholder force. Thanks to its 8-guide H-frame body construction, ram and table movements are carried out with high rigidity throughout the pressing cycle, maintaining parallelism and perpendicularity tolerances consistently over long strokes. Lsdpfx Ahox N Ukvs Ushg The CHSP 2000/600 model offers high control and repeatability in deep drawing and spinning operations of large-scale dies, featuring 2000 tons main ram and 600 tons blankholder capacity. The stress-relieved welded steel construction is designed for long-term durability and reliability under heavy industrial conditions. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame body type • Stress-relieved frame by vibration • Bronze Zr14 slideway bearings • WPQR and WPS certified welding by TÜRK-AK accreditations (EN ISO 15614-1:2017 / EN ISO 14731) • PLC controlled hydraulic system • Touchscreen operator panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic central lubrication system • Electronic filter contamination warning • Real-time monitoring of hydraulic unit oil temperature and system status on the operator panel • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear • Industrial-grade safety systems for operator protection 📐 Technical Specifications – CHSP 2000/600 Type: Steel construction, 8-guide H-frame body type Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blankholder): 2000 / 600 tons Movable / Fixed Table: 1500 × 2500 mm Parallelism / Perpendicularity: 120 / 60 micron/meter Stroke (Ram / Blankholder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø720 mm – Ck45 (2 pcs) Blankholder Cylinder: Ø390 mm – Ck45 (2 pcs) Pre-fill Valve: NG 200 PLC / Operator Panel: DELTA / DELTA 7” Approximate Weight: 105 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0052, spaudimo jėga: 200 t, HIDRALMAC Double-Column Press – 200 t – 1,200 × 1,000 mm – Deep Drawing Press For sale: A hydraulic double-column press (deep drawing press) manufactured by HIDRALMAC with a pressing force of 200 t. This machine is built for demanding deep drawing and forming operations, offering optimal conditions for industrial series production thanks to advanced control technology, high process speeds, and precise pressure regulation. ==== Technical Data & Information: Hydraulic Double-Column Press – Deep Drawing Press – 200 t ==== General Specifications - Manufacturer: HIDRALMAC - Model: Double-Column Press - Machine designation: Deep Drawing Press - Design: Double-column press - Pressing force: 200 t - Machine weight: approx. 20.5 t - Space requirement (L × W × H): approx. 4,000 × 2,600 × 5,000 mm - Main cylinder: 1 unit ==== Working Area - Distance between columns: 1,200 × 1,000 mm - Installation height: 800 mm - Working height: 1,100 mm - Stroke: 600 mm ==== Table & Slide - Table size: 1,200 × 1,000 mm - Slide plate: 1,200 × 1,000 mm - T-slots: according to DIN 650-22 (custom sizes available) - Return force: 20 t ==== Speeds - Rapid advance: 170 mm/sec - Return speed: 150 mm/sec - Working speed: 15 mm/sec - Setup mode: 2–10 mm/sec ==== Hydraulics & Power - Total power requirement: 32.5 kW - Axial piston pump: Bosch Rexroth - Hydraulic block: Rexroth - Oil requirement: approx. 500 l - Oil cooling: electric - Pressure regulation: via PLC (from 20 t) - Pressure holding time: 0–10 sec ==== Control & Operation - Control system: PLC - Voltage: 400 V / 50 Hz - Control voltage: 24 V - Pressure adjustment: 20–200 t via monitor - Program storage: up to 200 programs - Operation: movable two-hand control - Cabinet socket: 220 V Lhsdpfxefxyirj Ah Usg ==== Applications & Features - Precise control for deep drawing operations - High repeat accuracy - Suitable for series production and toolmaking ===== Deep drawing, forming, series production, sheet metal working, toolmaking Hydraulic press, double-column press, deep drawing press, forming press, industrial press Looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives and European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Our presses also exceed Canadian and European safety requirements, as they comply fully with Brazilian national safety regulations NR 12, which are based on these standards. Our core strengths are in special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. Hydraulic components are predominantly sourced from leading European manufacturers.

Būklė: naudotas, Gamybos metai: 2001, mašinos/transporto priemonės numeris: H01-3129, spaudimo jėga: 200 t, DUNKES Four-Column Press – 200 t – 1,300 × 1,300 mm – Stroke 1,000 mm Ljdpsfhcc Nofx Ah Uohg For sale is a hydraulic four-column press from the manufacturer DUNKES, boasting a pressing force of 200 t. The machine is specifically designed for deep-drawing and forming processes, and thanks to its robust construction, high rapid traverse speed, and large oil capacity, it delivers reliable performance in continuous industrial operation. ===== Technical Specifications & Information: Hydraulic Four-Column Press – 200 t ==== General Information - Manufacturer: DUNKES - Model: Four-Column Press - Design: Hydraulic Column Press - Machine Type: Deep-Drawing Press - Pressing Force: 200 t - Machine Weight: approx. 29,500 kg - Dimensions (L × W × H): approx. 2,600 × 3,000 × 5,200 mm ==== Working Area - Clear Passage Width: 1,300 × 1,300 mm - Stroke: 1,000 mm ==== Speeds - Rapid Traverse (downward): approx. 450 mm/s - Working Speed: approx. 20 mm/s - Overrun Path: 130 / 60 ms ==== Hydraulics & Drive - Total Power Requirement: 37 / 5.5 kW - Operating Pressure: 283 bar - Oil Volume: approx. 2,200 l ===== Deep drawing, forming technology, sheet metal forming, series production, industrial manufacturing Hydraulic press, hydraulic press, four-column press, column press, deep-drawing press, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety standard NR 12, which is based on these. Our great strength is in custom machine construction and press automation. We offer bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Special price for exhibition machine *available upon agreement New: With the frequency converter option, even up to a maximum of 45% eligible for government subsidy. Combination of: mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350 Lhedpfx Asd Su Hxjh Ujg *Approved for indoor installation *Both individual machines are fully manufactured and in stock, only need to be connected to each other 1. Technical data Briquetting press: Our best-selling briquetting press, the classic. + Proven, simple technology ensures extremely low failure rate + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material-dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Overall plant footprint: 2.2 x 1.1 x 2.8 m (LxWxH) Height - 2.8 m (special container) Delivery also possible in 2 components Weight: approx. 1,200 kg Oil volume: 110 liters Silo diameter: 1,000 mm Pump: 27 liters Hydraulic pre-compressor Option for press clamp cooling: no Option for hydraulic oil cooling: yes Option for fill level monitoring: yes CE compliant 2. Technical data Clean air extraction unit MMJET 350: Extraction connection diameter: 350 mm Motor: 11 kW Extraction port left (when standing in front of the dust bin) Residual dust content:

Gamybos metai: 2024, būklė: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: Lodpfjff Sbiex Ah Uohg - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Būklė: naudotas, Filtrų maišų kiekis: 50 vnt. Ventiliatorius: 11 kW. Ventiliatorius 2: 3 kW. Briketai: apie 60 x 40 mm. Presas: 4,5 kW. Dažnio valdymo Höcker Polytechnik ištraukimo įrenginys su briketavimo presa RSN tipo ECO 40/12, skirtas drožlių ir šlifavimo dulkių ištraukimui iš mažos ar vidutinės stalių dirbtuvės ar kitos medienos apdirbimo su bunkeriu ir briketavimo presa. Įskaitant šilumos grąžinimą ir kelis ištraukimo vamzdžius su pneumatiniais sklendėmis, skirti apie 5–10 mašinų dirbtuvių įrangai. Ledpfoy Nn A Ssx Ah Uehg

Būklė: naudotas, Gamybos metai: 2009, Ištraukimo skersmuo: 250 mm Nominalus oro srautas: 3534 m³/h Filtravimo plotas: 22,6 m² Variklis: 5,5 kW Briketavimas: Pralaidumas apie: 30 kg/h Briketo skersmuo: 65 mm Variklis: 3,0 kW Ljdpsyym A Sofx Ah Ujhg Sandėlio vieta: Nattheim

Būklė: naudotas, Bendras aukštis 6500 mm, pagrindo plotas 2000 x 2000 mm, lauko montavimas, kompaktiškų filtrų serija, modelis PKFP – 1 elementas – 1,92 x 1,92, kratomasis filtras, darbas esant viršslėgiui, filtro maišo ilgis 2500 mm – 180 mm skersmuo – bendra filtro plotas 105 m². 2 neapdoroto oro ventiliatoriai – 2 ortakiai (skersmuo 300 mm). 1 x ventiliatorius KT 300, 15 kW galia, našumas 6361 m³/h, pagamintas 1999 m. 1 x ventiliatorius S 25 / 300, 7,5 kW galia, našumas 7400 m³/h, pagamintas 1993 m. 1 x transportavimo ventiliatorius, 6,1 kW, našumas 57 m³/min, pagamintas 1996 m. Bendra apytiksliai 14.000 m³/h tūrio srautas. Briketavimo presas Höcker Polytechnik, tipas BrikStar C 3 - 12 . 1225, variklis 3,0 kW, briketo skersmuo 65 mm apvalus, pajėgumas apie 40-45 kg/h priklausomai nuo medžiagos specifinio svorio. Sandėlio vieta: Nattheim. Lhedpfx Aovviytoh Uog