Cormak Fm350N pirkti naudotą (488)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Siedlce
352 km
Ventiliatorius, pūstuvas
CORMAKFM350N
Skambinti
Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The FM350N fan is a highly attractive offer with an excellent price-to-performance ratio. The capability to connect four devices simultaneously, combined with its high motor power, makes this machine indispensable in carpentry workshops.
Machine specifications:
MOTOR POWER: 3.8 kW
SPEED: 2950 rpm
EXTRACTION CAPACITY: 4,860 m³/h
SUCTION NOZZLE DIAMETER: 4 x 100 mm / 1 x 180 mm
Hodpfx Asvu Anusdmsnk
VOLTAGE / FREQUENCY: 3/400V
WEIGHT: 51 kg
Mažas skelbimas
Sierakowska Huta
395 km
Kampinė juostinė briaunų šlifuoklė
CORMAKtyp MM2315
Skambinti
Būklė: labai geros būklės (naudotas), KATALOGO NUMERIS 7854
Techniniai duomenys:
- juostos ilgis 2515x152 mm
- juostos plotis 150 mm
- osciliacija
- vertikalus osciliacijos judesys
- šlifavimo ilgis 790 mm
- stalo matmenys 840x300 mm
- darbinis stalas lenktoms detalėms 300x250 mm
- darbinio stalo reguliavimas 80 mm
- variklis 2,2 kW
- šlifavimo agregato kampinis reguliavimas 90-45 laipsnių
- šlifavimo galvutės reguliavimas 0-45 laipsnių
Hnjdeyh H A Dspfx Admjk
- ištraukimo jungties skersmuo 100 mm
- matmenys ilgis/plotis/aukštis 1450/600/1230 mm
- svoris 138 kg
PRIVALUMAI
– su osciliacija – su padažu
– tiesiniam ir lenktam šlifavimui
– agregatas gali dirbti tiek vertikaliai, tiek horizontaliai
– nenudažyta – naudota šlifavimo staklė labai geros būklės
Grynoji kaina: 3900 PLN
Grynoji kaina: 930 EUR pagal 4,2 EUR kursą
(Kainos gali keistis esant žymesniems svyravimams)
Mažas skelbimas
Siedlce
352 km
Skiedrų ištraukimas
CORMAKFM350
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The extractor is designed for handling very large amounts of contaminants. Its powerful motor, stable base, and quick bag mounting make this unit highly recommendable. This is a high-performance machine suitable for both small workshops and large carpentries.
The CORMAK FM350 extractor, with its compact size and robust construction, is ideal for use in both small and large woodworking shops.
Cooperation with woodworking machines: The device is adapted for efficient operation with various woodworking machines such as planers, thicknessers, milling machines, and band saws.
Hedjvu Rx Iopfx Admenk
Extraction performance: The new-generation metal impeller at 2,950 rpm enables effective extraction of chips and sawdust at a capacity of 4,860 m³/h.
Construction: Reinforced, powder-coated steel frame guarantees solidness and durability, ensuring a long service life for the device.
Bag replacement: Simple and fast bag replacement using steel clamps makes maintenance and upkeep easy.
Adjustable feet: Threaded feet allow for adjustment on uneven surfaces, enhancing operational stability.
Accessory kit: The set includes 3 filter bags, 3 waste bags, and a 4-way hose manifold, which increases the functionality of the extractor.
Motor: Three-phase electric motor rated at 3.8 kW at 400V ensures reliability and efficient operation.
Impeller: Steel impeller provides better performance and longer lifespan compared to plastic impellers.
Connection to 4 machines: Additional manifold enables simultaneous connection to up to four machines, increasing operational flexibility.
Large-capacity bags: The set includes 6 bags (3 filter and 3 waste), each with a capacity of 200 liters, allowing longer operation without frequent bag replacement.
Standard equipment:
6 canvas bags
Technical specifications:
Extraction capacity [m³/h]: 4,860
Bag volume [liters]: 3 x 200
Number of bags: 6
Diameter of suction nozzle [mm]: 1 x 180, 4 x 100
Dimensions (L x W x H) [mm]: 2,355 x 590 x 2,150
Weight [kg]: 125
Motor power [kW]: 3.8
Power supply: 3-phase, 400V
Manual (DTR): Polish
CE Declaration: Yes

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Siedlce
352 km
Lazerinis suvirinimo aparatas
CORMAKWL2000
Skambinti
Būklė: naujas, Gamybos metai: 2026, Compact device utilizing FIBER technology designed for welding various types of metals, offering precision far superior to traditional welding methods.
Advanced technological solutions used in the offered welder enable the creation of high-quality, repeatable welds on thin-walled materials and parts without the risk of deformation.
Advantages of the laser welder:
- Easy to operate – thanks to the implemented solutions and well-thought-out construction, the operator can begin work after brief training
- Minimal indirect radiation; only protective goggles are required during operation to filter intense light
- Significantly faster welding compared to traditional methods, with productivity potentially increasing by 3 to 10 times
- Concentrated beam: minimal material structure change due to the small heat-affected zone
- Repeatable welds: nice weld seams with high strength
- Capability to weld very thin materials, such as 0.5 mm stainless steel
- Option to weld with or without filler wire
Maximum power: 2000 W
Laser wavelength: 1080 nm
Hnedpfx Adeizr Rlomjk
Weld penetration depth (stainless steel at 1 m/min): 4.57 mm
Weld penetration depth (carbon steel at 1 m/min): 3.59 mm
Weld penetration depth (aluminium at 1 m/min): 4.0 mm
Weld penetration depth (brass at 1 m/min): 4.0 mm
Welding speed: 0–120 mm/s
Automatic wire feeder: Ø 0.8 – 1.6 mm
Maximum power consumption: ≤6.0 kW
Cooling system: water-based
Operating voltage: 400V
Shielding gas consumption: 20 L/min
Dimensions: 600 x 1100 x 1100 mm
Weight approx.: 185 kg
LATEST GENERATION WELDING HEAD
- WOBBLE-type head
- Automatic wire feeder included
- Adjustable spot size: 0–5 mm
- High-power welding head allows multiple beam path types: ○,―,•, ꓷ, 0, ▲, 8
- Integrated connections for shielding gas and cooling system
- Interchangeable nozzles allow welding at various angles
- 10 m fiber optic cable connects the head to the power source
- Welding parameters adjustable directly on the head, eliminating the need to approach the control panel
- Fully ergonomic: thanks to its lightweight and flexible design, the head can weld even in hard-to-reach places
- Easy to service – fast and trouble-free protective lens replacement
Set includes automatic wire feeder
The wire feeding system is synchronized with the welder’s programming. The feeder’s task is to supply filler, allowing the operator to focus entirely on head operation.
Set contents:
- Laser welder with integrated cooling system
- Welding gun with focal length adjustment and complete accessory kit
- Fiber laser source
- Automatic wire feeder
- Complete set of cables
- Starter set of nozzles and protective lenses
WELDABLE MATERIAL THICKNESSES
Material / WELDER POWER
1000 W 1500 W 2000 W
Stainless steel 0.5–3.0 mm 0.5–4.0 mm 0.5–5.0 mm
Carbon steel 0.5–2.5 mm 0.5–3.5 mm 0.5–4.5 mm
Galvanized steel 0.5–2.5 mm 0.5–3.0 mm 0.5–4.0 mm
Aluminium 0.5–1.2 mm 0.5–1.8 mm 0.5–4.0 mm
Brass 0.5–1.2 mm 0.5–1.8 mm 0.5–2.5 mm
Mažas skelbimas
Siedlce
352 km
Frezavimo ir gręžimo staklės
CORMAKZX7045E DRO
Skambinti
Būklė: naujas, Gamybos metai: 2026, Machine Characteristics
Heavy, Stable Cast Iron Frame: The robust structure based on a heavy cast iron frame ensures stability and durability even under intensive use.
Milling Head Height Adjustment on the Support: Unique height adjustment on the support, not the column, allows the machine to be adapted for a wide range of applications.
Heavy-Duty Cross Table for Mill/Drill: The table features impressive dimensions with a precisely ground surface, providing a solid foundation for a variety of projects.
Dovetail Guides: Innovative dovetail-shaped guides guarantee smooth movement on all three axes, resulting in excellent machining accuracy.
Quiet Operation Thanks to Ground Gears: Precisely ground gears ensure quiet operation, enhancing comfort in the workshop environment.
Left and Right Spindle Rotation: Operate the tool in both directions to accommodate diverse tasks.
+/- 90 Degree Swiveling and Height-Adjustable Head: Flexible angle and height adjustment provide maximum control over material processing.
Digital Longitudinal and Cross Readouts
Additional Options and Benefits: The ZX 7045E DRO model is available from stock and comes with a free accessory kit:
Drill Chuck
MT4/MT3 Reducing Sleeve
MT3/MT2 Reducing Sleeve
The ZX 7045E DRO mill-drill machine is a high-precision, advanced tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and sturdy construction, it allows for precise milling and drilling on a wide range of materials. Its versatility and dependability make the ZX 7045E DRO the ideal equipment for professional workshops, meeting the demands of even the most complex applications.
(Base available as an option)
Technical Specifications
Maximum drilling diameter: 45 mm
Maximum face mill diameter: 80 mm
Maximum end mill diameter: 28 mm
Maximum thread diameter: 12 mm
Quill travel: 100 mm
Spindle taper: MT4
Hodpfx Asx Dkr Nsdmsnk
Spindle speed (6 speeds): 95, 170, 280, 540, 960, 1600 rpm
Max. distance from spindle end to table: 460 mm
Travel on X/Y/Z axis: 500 / 210 / 425 mm
Distance spindle to column surface: 245 mm
Worktable dimensions: 730x210 mm
Base dimensions: 400x600 mm
Motor power S1/S6: 1500W/2100W 400V
Machine dimensions (height with base): 1080 x 770 x 1460 mm
Weight: 278 kg
Standard Equipment
2-axis digital readout
MT3/B18 drill chuck arbor
Service tools
Keyless drill chuck 3–16 mm/B18
MT4/MT3 reducing sleeve
MT3/MT2 reducing sleeve
Operator’s manual
Mažas skelbimas
Siedlce
352 km
Frezavimo ir gręžimo staklės
CORMAKZX7045E 230V
Skambinti
Būklė: naujas, Gamybos metai: 2026, The ZX 7045E 230V drilling and milling machine is a versatile tool for metalworking, ideal for drilling, reaming, boring, tapping, face and side milling operations. The machine allows precise hole drilling in cast iron up to 45/40 mm in diameter. Additionally, you can tap threads up to M12, mill up to 80 mm in width, and create grooves up to 22 mm deep. The ZX 7045E is a reliable tool ready for any job!
Machine Features
- Heavy-Duty Cast Iron Base: The robust construction with a heavy cast iron frame guarantees stability and durability even under intensive use.
- Milling Head Height Adjustable on the Support: Unique height adjustment on the support instead of the column allows adaptation to various applications.
- Heavy-Duty Cross Table: The generously sized, precisely ground worktable ensures a solid foundation for a range of projects.
- Dovetail Guideways: Innovative dovetail slideways provide smooth movement along all three axes, ensuring excellent machining results.
- Quiet Operation Thanks to Ground Gears: Precision-ground gears ensure quiet running and improved workshop comfort.
- Left and Right Spindle Rotation: Switch spindle rotation direction for diverse tasks.
- Swiveling Head +/- 90° and Adjustable Head Height: Flexible head positioning and height adjustment give you full control over your work.
Extras and Benefits: The ZX 7045E model is available from stock and includes a free accessory set:
- Drill chuck
- MT4/MT3 reducing sleeve
- MT3/MT2 reducing sleeve
The ZX 7045E is more than just a tool – it’s a partner ready to handle even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance!
(Base available optionally)
Technical Data
Maximum drilling diameter: 45 mm
Maximum face mill diameter: 80 mm
Maximum end mill diameter: 28 mm
Maximum tapping diameter: 12 mm
Hnsdjwnb T Ijpfx Admek
Spindle quill travel: 100 mm
Spindle taper: MT4
Spindle speed (6 speeds for 1400 rpm motor): 95, 170, 280, 540, 960, 1600 min-1
Max. spindle nose to table distance: 460 mm
Travel X / Y / Z: 500 / 210 / 425 mm
Spindle to column surface distance: 245 mm
Worktable size: 730 x 210 mm
Base dimensions: 400 x 600 mm
Motor power s1/s6: 1500W/2100W 230V
Machine dimensions (h x w x d with base): 1080 x 770 x 1460 mm
Weight: 278 kg
Standard Equipment:
- Drill chuck arbor MK3/B18
- Service tools
- Drill chuck 3-16 mm/B18
- MT4/MT3 reducing sleeve
- MT3/MT2 reducing sleeve
Mažas skelbimas
Siedlce
352 km
Frezavimo ir gręžimo staklės
CORMAKZX7045E
Skambinti
Būklė: naujas, Gamybos metai: 2026, The ZX 7045E mill-drill is a versatile machining tool designed for steelworking. It excels in drilling, reaming, boring, tapping, as well as conventional and face milling. The machine provides precise drilling in cast iron up to 45/40 mm diameter. In addition, it enables tapping up to M12 mm, milling up to 80 mm width, and slotting to a depth of 22 mm. The ZX 7045E mill-drill is a reliable tool ready for immediate use!
Machine Features
- Heavy Duty Cast Iron Base: Robust construction based on a heavy cast iron frame ensures stability and durability, even during intensive use.
- Milling Head Height Adjustment on the Support: Unique height adjustment on the support, rather than on the column, allows for adaptation to a wide range of applications.
- Large Cross Table: A substantial, precisely ground table surface provides a solid work foundation for a variety of projects.
- Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along three axes, resulting in excellent machining accuracy.
- Quiet Operation with Ground Gears: Ground gears guarantee low-noise operation, enhancing workshop comfort.
- Left and Right Spindle Rotation: Enables bi-directional tool rotation to suit various tasks.
- Head Rotates +/- 90 Degrees with Adjustable Height: Flexible angle and height adjustment for complete control over material handling.
Additional Options and Benefits: The ZX 7045E is available for immediate delivery from stock and comes with a complimentary accessory set:
- Drill chuck
- MT4/MT3 reducing sleeve
- MT3/MT2 reducing sleeve
The ZX 7045E mill-drill is more than just a tool; it’s a partner capable of meeting even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance!
Hnodpfeud Iztsx Admjk
(Base available as an option)
Technical Data
Maximum drilling diameter: 45 mm
Maximum face mill diameter: 80 mm
Maximum end-mill diameter: 28 mm
Maximum tapping size: 12 mm
Quill travel: 100 mm
Spindle taper: MT4
Spindle speeds (6 speeds at 1400 rpm motor): 95, 170, 280, 540, 960, 1600 rpm
Max. distance spindle nose to table: 460 mm
X/Y/Z travel: 500 / 210 / 425 mm
Distance spindle to column: 245 mm
Table size: 730 x 210 mm
Base size: 400 x 600 mm
Motor (S1/S6): 1500W/2100W 400V
Overall dimensions (with base): 1080 x 770 x 1460 mm
Weight: 278 kg
Standard Equipment Includes:
- Drill chuck arbor MK3/B18
- Basic service tools
- Drill chuck 3–16 mm/B18
- Reducing sleeve MT4/MT3
- Reducing sleeve MT3/MT2
Mažas skelbimas
Siedlce
352 km
Obliavimo staklės su spiraliniu kotu
CORMAKPT410S
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK PT410S Thickness and Surface Planer with spiral cutterhead is a professional industrial-grade woodworking machine, combining the functions of a jointer and thickness planer in one compact unit. Equipped with a modern spiral cutterhead, it delivers maximum machining precision, outstanding surface finish, and quiet operation. It is an excellent choice for carpentry shops, furniture manufacturing, and workshops valuing efficiency, accuracy, and reliability.
Main advantages of the CORMAK PT410S Thickness and Surface Planer:
- Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for perfect wood surface finish, even with challenging wood types.
- Quick function change – seamless transition from planer to thickness mode thanks to separately opening tables and dust extraction cover.
- Robust construction – heavy cast iron frame and tables provide stiffness and reduced vibrations during operation.
- Precise adjustment – clear measurement scale and precision adjustment mechanism for planing depth and fence angle.
- High efficiency – up to 4.0 kW (S6 duty) motor ensures smooth and effective machining even for wide workpieces.
Design and technology:
The CORMAK PT410QS is engineered for years of intensive use. Its cast iron jointer tables assure excellent flatness and stability for the workpiece, while the centrally mounted thickness table guarantees uniform lifting. The oscillating aluminum fence with precise scale allows for setting angles from 90° to 45° for optimal material guidance.
Precision and performance:
Thanks to its 95 mm diameter spiral cutterhead spinning at 4300 rpm, the thickness planer delivers even, smooth surfaces—even on hard or resinous wood. Feed runs smoothly, with no vibrations or risk of fiber tear-out. Planing height adjustment up to 220 mm enables processing of large components, both solid wood and laminated panels.
Applications:
The CORMAK PT410S Planer-Thicknesser is perfectly suited for:
- carpentry and furniture shops
- artisan workshops
- stair and wood component production
- processing of solid wood and laminated panels
This is a machine intended for demanding users seeking precise and trouble-free jointer-thicknessers.
Standard equipment:
- Cast iron surfacer tables
- Spiral cutterhead
- Cutterhead guard
- Chip extraction outlet
- Feed switch
- Emergency stop
Optional equipment:
- Transport trolley
- Knife setting device
- Mortising/drilling attachment
Technical specifications:
Hnsdsyy Nl Nopfx Admek
- Planer table size: 1680 x 410 mm
- Thickness table size: 750 x 410 mm
- Cutting head diameter: 95 mm
- Spindle speed: 4300 rpm
- Fence tilt angle: 90–45°
- Chip extraction outlet: 100 mm
- Maximum thicknessing height: 220 mm
- Motor power: 4.0 kW / 400V
- Maximum workpiece width: 410 mm
- Dimensions: 1680 x 1100 x 1100 mm
- Weight: 360 kg
Mažas skelbimas
Siedlce
352 km
Dydžių pjūklas, matmenų pjūklas su įpjovimo pjūklu
CORMAKMJ45-KB-4 (1600)
Skambinti
Būklė: naujas, Gamybos metai: 2026, The ideal machine for processing high-density boards, MDF panels, ABS panels, PVC, solid wood, as well as other wood-based materials or those with a similar structure and hardness. The machine is built on a robust welded steel chassis with a fixed cast iron table and a moveable sliding table made from high-strength profiled aluminum. This machine is perfect for both professionals and amateur woodworkers.
Panel saw with scorer for wood by Cormak
The Cormak MJ45KB3-1600 panel saw with independent scoring unit is an excellent machine for precise woodworking operations. This innovative machine offers many advanced solutions to ensure top-quality cuts.
Key features of the Cormak panel saw with scorer:
- 1600 mm aluminum sliding table allowing smooth movement along the workpiece and delivering precise cuts up to a length of 1600 mm.
- Telescopic crosscut arm with a 1600 mm scale and two stops for accurate and stable guidance of the workpiece.
- Robust mounting of the sawblade unit in a cast iron housing, guaranteeing machine durability and reliability.
- Precise table carriage guidance on steel rods for smooth and accurate panel cutting strokes.
- Support table equipped with rollers for easier handling and enhanced stability when processing large panels.
- Powerful drive motor with high torque for optimal cutting quality.
- Adjustable, folding parallel fence, ideal for working with larger panels.
- Handwheel with angle scale for tilting the main saw blade up to 45°.
- Handwheel for setting the cutting height of both the main blade and the scorer.
- Telescopic longitudinal fence with dual flip-over stops for precision repeat cuts.
- Stable saw unit with tilting elements on both sides, cast from durable iron.
- Table extension option for cuts up to 1200 mm wide, included as standard.
- Large cast iron main table, carefully machined and ground for maximum stability and accuracy.
- Standard model includes an independently-driven 0.75 kW scorer and a robust 5.5 kW main saw blade, both easily adjustable by separate, convenient wheels.
Application of panel saws for wood, scorer
This sliding table saw is the perfect tool for professional applications where quality, precision, and reliability are essential in woodworking. Thanks to its advanced features and solid construction, it is ready to meet even the most demanding tasks in any joinery workshop.
Technical specifications:
SLIDING TABLE LENGTH: 1600 mm
CUTTING WIDTH: 1250 mm
SAW TILT: 0-45°
MAX. CUTTING HEIGHT AT 90°: 80 mm
MAX. CUTTING HEIGHT AT 45°: 56 mm
MAX. SAW BLADE DIAMETER: 315 mm
MAX. SCORING BLADE DIAMETER: 125 mm
MAIN SAW SPEED: 4000/6000 rpm
SCORING BLADE SPEED: 8000 rpm
Hodetz Srlspfx Admjnk
MAIN MOTOR POWER (S1/S6): 5.5 kW / 9 HP
SCORER MOTOR POWER (S1/S6): 0.75 kW / 1.2 HP
WEIGHT: 460 kg
Mažas skelbimas
Siedlce
352 km
Dydžių pjūklas, matmenų pjūklas su įpjovimo pjūklu
CORMAKMJ45-KB-4 (2000)
Skambinti
Būklė: naujas, Gamybos metai: 2026, Ideal machine for processing high-density boards, MDF, ABS panels, PVC, solid wood, and other wood-based materials or those with similar structure and hardness. The machine is built on a welded steel body with a fixed cast iron table and a moving table made of high-strength profiled aluminum. This machine is perfect for both professionals and hobbyist woodworkers.
Cormak Panel Saw with Scoring Unit
The MJ45KB3-2000 panel saw with a separate motorized scoring unit is an excellent tool for precise wood processing. This innovative machine offers many advanced solutions that ensure outstanding cut quality.
Key features of the Cormak panel saw with scoring unit:
Hnodpotz Sm Ajfx Admsk
- 2000 mm aluminum sliding table enables smooth movement across the material, ensuring precise cuts up to nearly 2000 mm in length
- 1600 mm telescopic arm with a scale and two stops for precise and stable guidance of the workpiece
- Solidly mounted saw unit in a cast iron body, guaranteeing the machine's durability and reliability
- Accurate movements thanks to a hardened prismatic rail for smooth and precise panel processing
- Support table with rollers for easy handling and stability when cutting large workpieces
- High-performance drive motor with high torque for optimal cut quality
- Foldable parallel fence with adjustment, ideal for working with larger panels
- Handwheel with scale for tilting the main blade up to 45°
- Telescopic longitudinal fence with two stop flaps for guaranteed precise cutting
- Stable saw unit with tiltable elements on both sides, made of cast iron
- Table width extension for cuts up to 1200 mm included in the delivery scope
- Large, precision-machined and polished cast iron table for stability and cutting accuracy
- Standard version equipped with a separately driven 0.75 kW scoring unit and a powerful 5.5 kW main saw, both adjustable using a convenient handwheel
Applications of panel saws with scoring unit
This panel saw is the ideal tool for professionals who value quality, precision, and reliability in wood processing.
Technical specifications
SLIDING TABLE LENGTH: 2000 mm
CUTTING WIDTH: 1250 mm
BLADE TILT: 0-45°
MAX CUTTING HEIGHT AT 90°: 80 mm
MAX CUTTING HEIGHT AT 45°: 56 mm
MAX BLADE DIAMETER: 315 mm
MAX SCORING BLADE DIAMETER: 125 mm
MAIN BLADE SPEED: 4000/6000 rpm
SCORING BLADE SPEED: 8000 rpm
MAIN MOTOR POWER S1/S6: 5.5 kW / 9 HP
SCORING MOTOR POWER (S1/S6): 0.75 kW / 1.2 HP
WEIGHT: 460 kg
Mažas skelbimas
Siedlce
352 km
Dydžių pjūklas, matmenų pjūklas su įpjovimo pjūklu
CORMAKMJ45-KB4 (3200)
Skambinti
Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The Cormak MJ45-KB4 panel saw with scoring unit is an advanced woodworking machine, commonly referred to as a panel saw with scorer. This is an ideal solution for cutting and processing various types of materials, primarily wood, chipboard, MDF boards, and other wood-based materials.
Construction and Design:
The Cormak MJ45-KB4 is a robust woodworking machine featuring a durable steel frame, ensuring stability during operation. The large work table, guided on hardened steel rods and offering a carriage length of 3200 mm, with integrated cutting units, guarantees both efficiency and accuracy.
Main Cutting Unit:
Scoring Unit: A key feature of this saw is the scoring blade, which relieves internal stresses in the wood by scoring the underside of the workpiece. This reduces the risk of cracking and deformation after cutting. The 0.75 kW scoring motor ensures reliable scoring operations.
Main Saw Blade: The Cormak MJ45-KB4 is equipped with a circular saw blade as the main cutting tool. The electric motor drives the saw blade, enabling precision cutting. With a blade diameter of 350 mm, the maximum cutting height is up to 105 mm.
Manual Scoring Adjustment: Easy and effective manual scoring adjustment allows for quick and precise tool settings. Adjustable stops make it easy to return to previous settings, and the intuitive control location at the operator’s workstation allows adjustments without work interruption.
Features and Advantages of the Panel Saw:
- Large working area: The panel saw has a spacious working surface, facilitating handling of large material sheets.
- Smooth feed: The feed system utilizes precision-hardened steel guides and ball bearings, which ease longitudinal cutting of long panels or plywood sheets.
- Angle and cutting depth adjustment: Adjustable angle and cutting depth enable the tool to be tailored to specific project requirements.
- Safety features: The panel saw is equipped with safety devices, including blade guards and emergency stop systems to ensure safe operation.
Applications of Panel Saws with Scoring Unit:
Panel saws with a scoring unit are mainly used in the woodworking and window manufacturing industries for cutting wood and wood-based materials. They are ideal for cutting boards, chipboard, MDF panels, and similar materials. The Cormak MJ45-KB4 is a professional tool distinguished by high precision.
Technical Specifications
Table dimensions: 990 x 575 mm
Sliding table length: 3200 mm
Cutting width with rip fence: 1250 mm
Crosscut with crosscut fence: 3100 mm
Blade tilt: 0° - 45°
Saw blade diameter: Ø350 mm
Hedpfjtz Smijx Admjnk
Main blade bore: Ø30 mm
Blade height: 0-105 mm
Blade height at 45°: 0-73 mm
Main saw spindle speed: 4000 / 6000 rpm
Scoring blade diameter: Ø125 mm
Scoring blade bore: Ø20 mm
Scoring spindle speed: 8000 rpm
Main motor power S1/S6: 5.5 kW / 9 HP
Scoring motor power S1/S6: 0.75 kW / 1.2 HP
Dust extraction port under table: 100 mm
Dust extraction port at blade guard: 80 mm
Machine weight: 680 kg
Saw delivered without saw blades.
Price not valid for machines sold in Poland.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKHBS275
Skambinti
Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Bandsaw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed matter. This model is equipped with a swiveling arm (0-60°), and the saw guides are based on carbide inserts. The frame design ensures precise and quiet operation.
Machine Features
The horizontal bandsaw for metal with a swiveling arm allows cutting perpendicular to the axis of the material and at any angle from 0 to 60°. Material can be fed manually or by any mechanical device; however, tool feed is automatic. The blade guides are fitted with special carbide plates and bearings. This significantly influences the band guidance, blade life, straightness, accuracy, and cutting quality. Carbide guidance greatly reduces machine and blade wear. The machine is fitted with an efficient coolant pump with a closed-loop cooling system.
The saw arm is made from a single-piece cast iron, and with the 27 mm wide cutting blade used in this bandsaw, allows for series cuts of both profiles and solid materials. The vise is placed on an adjustable bed and features a quick-release clamp. The blade guides have hard metal carbide plates and a bearing system. It is specifically THE CARBIDE GUIDES that are responsible for cutting precision and straightness.
The arm is fitted with an automatic blade tension sensor and is inclined at 25 degrees, increasing blade life. A cleaning brush is mounted underneath the arm to ensure optimal blade cleanliness and operation. The drive is transmitted via a worm gear.
The base is fitted with a cast iron working table with a swiveling arm and a control panel on a separate arm. During cutting, the primary cutting movement is the translation of the blade, while the feed is by the descending arm. The arm descent speed (cutting speed) is adjusted by a hydraulic cylinder.
Hnodpfx Adeudi Unomsk
Feed speed is regulated on the control panel. Two cutting speeds are available: 37.5 and 75 m/min. In the arm's lower position (after cutting), the drive to the cutting blade is switched off automatically. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle ends or any guard is opened. Additional protection results from the automatic machine switch-off in the event of a broken blade.
The machine drive is transmitted by a motor with a worm gearbox.
The motor features a thermal fuse to prevent overheating during operation.
Technical Data
TOTAL POWER: 1.5 kW
POWER SUPPLY: 400V 50Hz
ARM DESCENT ADJUSTMENT: hydraulic cylinder
BLADE LENGTH: 2450 x 27 x 0.9 mm
BLADE SPEED: 37.5 / 75 m/min
VISE BASE HEIGHT: 900 mm
MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm
WEIGHT: 215 kg
ANGLE 0º ø220 260 x 140 200 x 200
45º R ø160 160 x 140 160 x 160
60º R ø100 120 x 100 100 x 100
The price does not apply to machines purchased in Poland.
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKIMET KS652
Skambinti
Būklė: naujas, Gamybos metai: 2026, The KS 652 is a double-column, semi-automatic band saw designed as the ideal work tool for professionals who need to cut bars, pipes, profiles, and other metal construction components—with the ability to cut at angles up to 60° to the left and right.
Machine Description:
The KS series saws are the only machines in their class that allow cutting both to the left and right—simply set and close the vise. Once the material is in place, the user can set the angle and rotate the saw bow without having to reopen the vise or reposition the bar. The vise moves transversely across the worktable, ensuring quick access.
The cutting frame is constructed from electro-welded tubular steel, guaranteeing high stability during cutting.
Like all IMET saws, the KS model features a high blade tension (2000 kg/cm²) and a 6° canted blade, which improves material feed, reduces loading, and optimizes cutting performance even for large cross-sections and solid materials.
A wide worktable provides full support for the material. The machine is very user-friendly and easy to operate thanks to the automatic stop system covering 0° to 60° left/right and the angle scale on the table that makes positioning easier.
For increased cutting precision, IMET saws are equipped with an angle deviation detection system.
A mechanical material detection system ensures rapid approach to the material by automatically identifying the first point of contact; the end of the cut is managed by a microswitch in the blade guide, ensuring precise blade positioning through hardened rollers and auxiliary bearings.
All working parameters and settings are controlled via an independent, mobile console with LED indicators for blade tension, blade guard, motor overheating, and power check.
The console allows the operator to set the following machine parameters: blade speed, descent speed, and end-of-cycle management (selectable: return of the bow with halted blade, return of the bow with running blade, or end of cycle without bow return).
Cutting performance can be further increased by opting for a 4 kW motor, hydraulic blade tensioner, and a high-tension hydraulic system (2200 kg/cm²).
Technical Specifications:
POWER SUPPLY: 3-phase 400V
TOTAL POWER: 3 kW
BOW DESCENT ADJUSTMENT: Hydraulic, infinitely variable
CUTTING SPEED: 15–100 m/min
Hedpfx Adoyym I Ujmsnk
VISE BASE HEIGHT: 844 mm
BLADE DIMENSIONS: 5320 x 34 x 1.1 mm
DIMENSIONS: 1895 x 2870 x 2300 mm
WEIGHT: 2100 kg
Mažas skelbimas
Siedlce
352 km
Automatinė CNC juostinė pjūklas
CORMAKIMET CUBO 400NC FLAT
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CUBO 400 NC model is a modern band saw that provides user safety thanks to a guard made of specially designed metal sheets, protecting all four sides and all moving parts of the band saw. The guard system enables full access to the machine and ease of maintenance.
An innovative and user-friendly 7" touchscreen with an intuitive interface allows complete control over all machine settings. It is possible to program up to 99 cutting programs and 10 different cutting lengths on the same bar.
CNC control gives access to all operational functions: automatic calculation of blade thickness, number of stroke repetitions, band speed, and blade lowering speed. The interface also allows monitoring the CUBO work status and troubleshooting using a self-diagnostic function.
An integrated feeder for automatic repetition of the cutting process. The feeder moves on a hardened and chromed guide; high positioning accuracy is ensured by precise feeding with a ball screw and backlash-free (self-braking) motor, mounted on a floating plate to compensate for loads when working with irregular bars.
The saw body features a rigid cast iron construction made of square-section tubes, ensuring high resistance to deformation and improved performance with all types of material. The bow is equipped with an endless screw and a crown made of highly durable bronze alloy.
The mechanical material detection device allows rapid blade approach to the material, automatically detecting the first cutting point. The end cut is controlled by a microswitch on the blade guide, enabling perfect band positioning thanks to hardened metal pads and additional bearings.
IMET automatic machines can be connected to the company network and used remotely via the SAWFACTORY system and modem. SAWFACTORY is dedicated software that allows process management from the office by setting programs and monitoring operation via a web application. The software also enables remote technical support.
Technical parameters:
SUPPLY: 3 phase 400V
Hnjdpfx Ajyym Eaedmek
TOTAL POWER: 2.2 kW
ARM DESCENT CONTROL: Hydraulic with stepless adjustment
CUTTING SPEED: 18-110 m/min
VICE BASE HEIGHT: 890 mm
BLADE DIMENSIONS: 4020 x 34 x 1.1 mm
FEEDER LENGTH: 515 mm
END SCRAP: 80 mm
MINIMUM MATERIAL LENGTH: 15 mm
DIMENSIONS: 1950 x 1800 x 1990 mm
WEIGHT: 990 kg
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKBS-530
Skambinti
Būklė: naujas, Gamybos metai: 2026, Powerful band saw, featuring a pivoting arm adjustable from -45° to +60°, portable quick-action vise, blade tension gauge, and hydraulically lowered arm with stepless adjustment. Additionally equipped with an ergonomically designed control panel ensuring safety and user comfort. Maximum cutting width is 490 mm.
Distinctive features of the band saw include:
- The blade tension wheel is fitted with a dial gauge tension meter, providing precise tension indication for optimal cutting results and blade longevity.
- The saw frame is rigid, manufactured from cast iron, and resistant to torsion. High-quality drive wheels, fitted inside the frame, support the cutting blade.
- The control panel is ergonomic, with clearly marked buttons for main power, start, stop, coolant activation, and blade speed selection (slow/fast). An emergency stop button is also present, compliant with the latest EU safety standards.
- The hydraulic cylinder control is mounted on the panel column, allowing precise adjustment of the arm lowering speed and activation.
- The drive system is stable thanks to high-grade, hardened, and ground gears. The powerful motor is proportionally matched to the material being cut.
- Blade guidance is secure with bearing guides, adjustable to the width of the workpiece.
- An auto-stop feature automatically cuts power when the arm reaches its lowest position.
- The vise is robust, reliably clamping workpieces; a material stop is included.
- The hydraulic cylinder is reinforced, enabling precise arm lowering speed adjustment via a potentiometer. The arm swivels from -45° to +60°, with lifting force adjustable by a spring.
- An efficient coolant system is integrated into the saw base.
- Workpieces can be rapidly clamped in the vise, which can be re-positioned to either side for angled cutting.
- The package includes a coolant collection pan with pump.
- The saw’s solid body is cast iron, guaranteeing stability during operation.
- The saw arm can be locked in place.
- The base is rigid, allowing work at approximately 95 cm height – standard configuration with the machine.
Additional advantages:
Other features include adjustable blade speed (35/70 m/min), quick-release vise, pivoting arm from -45° to +60° with scale readout, a full-featured unit with excellent value for money, a robust construction for precise, smooth, vibration-free operation, continuously adjustable hydraulic arm lowering, durable carbide roller guides, reinforced bronze worm gearbox, automatic end-stop, and coolant system as standard equipment.
Hedpjv R Tgtjfx Admsnk
Technical specifications:
Working height – 870 mm
Cutting speed – 35/70 m/min
Band saw blade dimensions – 3770 x 34 x 1.1 mm
Band saw blade width – 34 mm
Coolant system pump power – 0.1 kW
Total power – 2.8 kW
Voltage – 400 V
Dimensions (W x D x H) – 2200 x 1400 x 1500 mm
Weight – 630 kg
Mažas skelbimas
Siedlce
352 km
Lazerinis suvirinimo aparatas
CORMAKWL3000
Skambinti
Būklė: naujas, Gamybos metai: 2026, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unmatched precision and performance. This device is designed for welding various types of metals, delivering top-level quality and repeatability of welds. With its 3-in-1 function enabling welding, cutting, and laser cleaning, the unit is versatile and efficient across many industrial sectors.
Key Features and Advantages
Advanced cooling system: The new, more efficient water-cooling system ensures optimal operating temperature, allowing for longer uninterrupted work and extending the device's lifespan.
Innovative design: The ergonomic and lightweight welding head design allows for welding even in hard-to-reach areas. With the adjustable spot size (0-5 mm) and interchangeable nozzles, the operator has full control over the welding process.
User-friendly – thanks to the applied solutions and thoughtful construction, the operator can start working after a short training session.
Low indirect radiation – during operation, protective goggles for filtering strong light are sufficient.
Significantly faster welding than traditional methods; efficiency can increase by 3 to 10 times.
Focused beam: minimal structural change due to the small heat-affected zone.
Repeatable welds – the weld seam is clean, and the joints offer high strength.
Capable of welding very thin materials, such as 0.5 mm stainless steel.
Option to weld with or without filler wire.
Integrated laser cleaning function enhances the device’s range of applications.
Cutting option – delivers excellent cutting quality, requiring no mechanical processing.
Technical Specifications
Maximum power: 3000 W
Laser wavelength: 1070 nm
Fiber length: 10 m
Operating modes: Continuous / Modulated
Air pressure: 10 – 15 L/min
Welding speed: 0–215 mm/s
Automatic wire feeder: Ø 0.8 – 2.0 mm
Maximum power consumption: ≤11.0 kW
Focal length: 150 mm
Cooling system: Water-cooled
Operating voltage: 400V
Shielding gas consumption: 20 L/min
Dimensions: 600 x 1100 x 1100 mm
Weight approx.: 207 kg
Hnedpfjkkbw Uox Admsk
Mažas skelbimas
Siedlce
352 km
Lazerinis suvirinimo aparatas
CORMAKSL2000
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK SL2000 laser welder is an advanced industrial fiber device offering integrated laser welding, cutting, and cleaning capabilities within a single unit. With 2000 W of power and a modern design, this machine excels in facilities prioritizing operational speed, weld quality, and reliability.
As part of a special offer, the welder comes complete with a set of U-groove rollers, a PTFE wire feeding conduit, and a comprehensive cleaning kit: lens and nozzle.
Key machine features:
- High laser power – 2000 W – enables deep penetration welds and welding of thicker materials without multiple passes.
- Welding speed up to 120 mm/s – significantly reduces production time compared to traditional methods.
- Focused laser beam – minimal thermal impact, producing neat and durable weld seams.
- Capability for welding very thin materials – stainless steel from 0.5 mm.
- Option to weld with or without wire – process flexibility.
- Laser cleaning and cutting modes – expand the device’s range of applications.
- Automatic wire feeder – synchronized with software for full process control.
Design & technology:
The CORMAK SL2000 is equipped with a 1080 nm fiber laser source and an advanced head with a 0–5 mm adjustable spot, enabling seams even in hard-to-reach areas. The unit's water cooling system and 230V operating voltage make it safe for use in various production environments. Interchangeable nozzles and an ergonomic build facilitate use and maintenance.
Precision & work efficiency:
The penetration depth for stainless steel at 1 m/min reaches 4.57 mm, which is competitive within this device class. Precise parameter adjustment gives the operator full control over weld quality—whether for thin or structural components. Beam stability ensures repeatability and aesthetics.
Applications:
- Metalworking shops and industrial locksmiths
- Production of balustrades, lightweight structures, and steel frames
- Automotive, household appliances, electronics industries
- Metal part cutting and cleaning services
Standard equipment:
- Laser welder with integrated cooling system
- Welding gun with adjustable focal length
- Fiber laser source
- Automatic wire feeder Ø 0.8–1.6 mm
- Complete cable set
- Starter kit of nozzles and protective glasses
Hnedpfoychl Ssx Admsk
Technical data:
Maximum power 2000 W
Laser wavelength 1080 nm
Penetration depth (stainless steel at 1 m/min) 4.57 mm
Penetration depth (carbon steel at 1 m/min) 3.59 mm
Penetration depth (aluminum at 1 m/min) 4.0 mm
Penetration depth (brass at 1 m/min) 4.0 mm
Welding speed 0–120 mm/s
Automatic wire feeder Ø 0.8–1.6 mm
Maximum power consumption ≤6.0 kW
Cooling system water-cooled
Operating voltage 230V
Shielding gas consumption approx. 10–12 L/mm wire Ø
Dimensions 600 x 1100 x 1100 mm
Weight approx. 185 kg
Mažas skelbimas
Siedlce
352 km
Juostinis šlifuoklis
CORMAKSM75
Skambinti
Būklė: naujas, Gamybos metai: 2026, Universal belt grinder for coarse grinding and polishing of metal. Suitable for a variety of shapes and materials. The grinder comes standard with a suction nozzle for dust extraction. Belt dimensions are 75 x 2000 mm, robust 3 kW motor. The SM 75 model is additionally equipped with 2 belt speeds: 14.5 and 29 m/s. The set includes 2 rubberized wheels to ensure the abrasive belt does not slip.
Machine features:
- Grinder equipped with 2 extraction nozzles
- Two grinding speeds
- Suitable for surface, edge, and contour grinding
- Stable, vibration-free construction
- Quick adjustment of belt angle
- High belt speed
- Powerful motor ensures excellent grinding quality
- Large grinding surface
- Spring-tensioning system ensures automatic abrasive belt tensioning
- Easy belt adjustment and replacement
Technical data:
CONTACT WHEEL SURFACE (W x D):
250 mm x 150 mm
ABRASIVE BELT DIMENSIONS (L x W):
2000 mm x 75 mm
BELT SPEED:
14.5 / 29 m/s
MOTOR POWER:
3 kW / 400 V
WEIGHT:
72 kg
DIMENSIONS:
Hnjdpfx Aovu Uhaedmjk
1070 x 560 x 980 mm
Mažas skelbimas
Siedlce
352 km
žirklinis padėklų vežimėlis
CORMAKTA3510
Skambinti
Būklė: naujas, Gamybos metai: 2026, Product Description:
The TA3510 scissor lift pallet truck is more than just a standard tool for moving heavy goods. Its robust construction, reliable hydraulic system, and innovative safety features make it suitable for applications across multiple industries. It enables easy and safe lifting of heavy loads, providing exceptional performance and operator comfort.
The reinforced frame and hydraulic system facilitate effortless lifting of pallets with loads of up to 350 kg. The TA3510 model is also equipped with a special overload valve, which prevents excessive loading of the truck, reducing operating costs. The sealed hydraulic pump protects against contaminants and oil leaks, ensuring continuous and safe operation.
This model is distinguished by remarkable maneuverability thanks to its swivel wheels, allowing work in confined and hard-to-reach areas. Additionally, the truck design enables easier and quicker lifting and lowering of goods, speeding up warehouse processes. Another advantage is the high-quality welds made by robotic welding, ensuring long-term durability and reliable operation under demanding conditions.
The scissor lift platform truck is ideal for transporting electric batteries and automotive batteries. With its solid construction and stability, it is the perfect solution for safely moving even heavy batteries. The scissor lifting mechanism allows for easy raising and lowering, which is crucial in both production and warehouse logistics. High maneuverability and movement precision guarantee efficient handling, improving both operational safety and productivity in battery management tasks.
Full availability of spare parts and nationwide service in Poland ensures fast and trouble-free technical support.
Key Features of the TA3510:
- Capacity: Can lift loads up to 350 kg, making it one of the most efficient scissor trucks on the market.
- Safety: Equipped with multiple safety systems, including stroke limiters that prevent hazardous situations during operation.
- User-Friendly: Simple to operate thanks to its intuitive design and straightforward hydraulic system.
Hedoric Emspfx Admenk
- Robust construction: Manufactured from high-quality materials, ensuring durability and resistance to damage.
Technical Specifications
- MAXIMUM CAPACITY: 350 kg
- LIFTING HEIGHT: 1390 mm
- PLATFORM HANDLE HEIGHT: 975 mm
- PLATFORM DIMENSIONS: 500 x 810 x 50 mm
- MINIMUM PLATFORM HEIGHT: 400 mm
- WEIGHT: 85 kg
Standard Equipment:
- Reinforced polyurethane wheels
- Ergonomic grip handle
- Sealed hydraulic foot pump
- Platform lowering speed adjustment
- Safety brakes on drive wheels
Mažas skelbimas
Siedlce
352 km
Mobilus darbo stalas
CORMAKST2118
Skambinti
Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The mobile workbench is the perfect solution for precise woodworking tasks.
Adjustable lifting height up to over 1000 mm. The tabletop features wooden inserts that protect the surface of the workpiece.
Device Description
Allows for solo operation without additional assistance, even with full-size wood and wood-based panels. Its mobility and folding function make it ideal for workshops or garages with limited space.
The table can be used for routing, cutting, gluing, and assembling. After use, it can be folded to take up minimal space. The highly durable steel construction ensures a long service life.
The table is additionally equipped with castors and a locking mechanism.
Tilting function available.
Technical data:
Maximum length: 2100 mm
Maximum width: 1800 mm
Minimum length (folded): 1150 mm
Minimum width (folded): 300 mm
Height adjustment range: 790 - 1050 mm
Hnedpfx Asyw Riwedmjk
Base dimensions: 1000 x 1150 mm
Weight: approx. 35 kg
Mažas skelbimas
Siedlce
352 km
Benzininė pjovimo-skaldymo staklės
CORMAKRPL380
Skambinti
Būklė: naujas, Gamybos metai: 2026, Wood Processor/Splitter CORMAK RPL380
Key features and functions of this machine:
- Productivity: Efficient operation with productivity up to 8 m³ of wood per hour, depending on wood type.
- Multifunctionality: Combines a chainsaw, splitter, and belt conveyor in one device, enhancing capability and saving time.
- Versatility: Suitable for both professionals and individual users, allowing processing of various wood species.
- Engine: 15 HP petrol engine provides powerful force necessary for effective cutting and splitting.
- Time Efficiency: Wood processing time is significantly reduced thanks to the integration of three functions in one unit.
- Reliability: Designed for use in sawmills, the timber industry, and for firewood or construction wood production.
- Equipment: Features a STIHL chain guide bar, with an oil tank for the guide bar located at the rear of the housing.
- Precision: Cross wedge enables effective splitting and precise cutting to desired length.
- Adjustment: Wedge height can be easily adjusted to the log diameter using a lever.
- Safety: Operator protection ensured by integrated safety and protection systems.
- Mobility: Easy relocation between worksites thanks to wheel chassis and ball hitch.
- Belt Conveyor: The belt feeds logs to the splitter and then transports split pieces away. It can be folded in half and set to a vertical position.
- Certifications: The processor/splitter comes with required CE quality certificates and technical documentation.
A strong 24L hydraulic pump powers:
✅ Feed conveyor
✅ Cutting saw
✅ Splitting cylinder with up to 20T pressure
✅ Discharge conveyor
The machine is equipped with a 9-step cross wedge adjustment, allowing splitting of logs of various diameters into 2 or 4 parts.
✅ Adjustable cutting length
✅ Log holding clamp
✅ Central chain lubrication system
Technical specifications
Engine:
Engine Model: Lanchin G420F
Engine Power: 9.0 kW (15 HP)
Displacement: 420 cc
Fuel: Petrol
Fuel Tank Capacity: 5.4 L
Starter: Electric / manual (recoil)
Recommended engine oil: 15W40 (1.7 L)
Hydraulic system:
Hydraulic oil tank capacity: 24 L
Recommended hydraulic oil: HL46 / HL32
Performance and cutting parameters:
Maximum splitting force: 20T
Splitting wedge: 4-way
Maximum log diameter: 380 mm
Minimum/maximum wood cutting length: 190 mm – 600 mm
Chainsaw guide bar length: 18” (45 cm)
Hodpfxeyw I Eps Admsnk
Productivity: approx. 8 m³/h
Feed belt:
Length/height of feed conveyor: 1000 mm / 910 mm
Feed conveyor dimensions (L × W): 1040 × 254 mm
Maximum feed belt incline: 40°
Discharge belt:
Discharge belt dimensions (L × W): 3200 × 254 mm
Discharge belt speed: 27 m/min
Wheels and tyres:
Size: 135/70R12
Pressure: 2.5 bar
Dimensions and weight:
Machine dimensions: 6600 × 1380 × 2000 mm
Weight: 680 kg
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Siedlce
352 km
Juostinis šlifuoklis
CORMAKSM150
Skambinti
Būklė: naujas, Gamybos metai: 2026, Universal belt grinder for coarse grinding and polishing of metal. Suitable for various shapes and materials. The grinder is factory-equipped with an extraction nozzle for dust collection. The belt size is 75 x 2000 mm, with a powerful 3 kW motor. The SM 75 model additionally features two belt speeds: 14.5 and 29 m/s. The set comes with 2 rubber-coated wheels to ensure slip-free belt operation.
Machine features:
- Grinder equipped with 2 extraction nozzles
- Two grinding speeds
- Suitable for surface, edge, and contour grinding
- Stable, vibration-free construction
- Quick adjustment of the belt angle
- High abrasive belt speed
- High-power motor provides excellent grinding performance
- Large grinding area
- Spring tensioning system ensures automatic belt tensioning
- Easy belt adjustment and replacement
Technical data:
Contact wheel surface (W x D): 250 mm x 150 mm
Abrasive belt dimensions (L x W): 2000 mm x 75 mm
Belt speed: 14.5 / 29 m/s
Motor power: 3 kW / 400 V
Weight: 72 kg
Hodpfx Adjvu Uh Tjmenk
Dimensions: 1070 x 560 x 980 mm
Mažas skelbimas
Kobyłka
361 km
CNC tekinimo staklės
CormakCK7150 LT12
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 290 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 500 mm, veleno skylė: 52 mm, veleno greitis (maks.): 3 000 aps./min, bendras svoris: 4 800 kg, Įrenginys įsigytas 2025 m. rugpjūtį kartu su vertikaliu apdirbimo centru (pateiktas kitame skelbime), naudotas tik bandymams (iki 20 valandų darbo). Dėl pasikeitusių verslo prioritetų planuotos gamybos nepradėsime.
Hnedpfx Adsyi Aixomjk
Įrenginys išperkamosios nuomos pagrindu PKO Leasing S.A iki 2028 m. rugpjūčio. Nuomos sąlygas pateiksime susisiekus. Pirmenybę teikiame nuomos perleidimui, tačiau su nuomotojo sutikimu galimas ir išpirkimas už grynus pinigus.
Mažas skelbimas
Kobyłka
361 km
Vertikalus apdirbimo centras
CormakMILL850 SA808
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 20 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 15 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 15 m/min, valdiklių gamintojas: Simens, valdiklio modelis: SINUMERIK 808D, bendras aukštis: 2 700 mm, bendras ilgis: 2 800 mm, bendras plotis: 2 300 mm, stalo plotis: 500 mm, stalo ilgis: 1 000 mm, stalo apkrova: 500 kg, veleno greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 24, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, Įrenginys įsigytas 2025 m. rugpjūtį kartu su tekinimo staklėmis – paskelbtas atskirame skelbime, buvo įjungtas tik bandymams (iki 20 darbo valandų). Dėl pasikeitusių verslo prioritetų planuotos gamybos nestartuosime.
Hnedpeyi Aprsfx Admsk
Papildomai: 12 000 aps./min velenas, 4 rotacinė ašis, TS27R įrankių matavimo zondas.
Mašina yra išperkamoje nuomoje PKO Leasing S.A iki 2028 m. rugpjūčio. Lizingo sąlygas pateiksime susisiekus. Pageidautinas perleidimas, tačiau su lizingo bendrovės sutikimu galima ir grynaisiais pinigais.
Mažas skelbimas
Siedlce
352 km
Formatinė pjovimo staklės su priešpjūviu
CORMAKMJ45-KB-4 (2600)
Skambinti
Būklė: naujas, Gamybos metai: 2026, The CORMAK MJ45-KB4 panel saw is an industrial sliding table saw with a scoring unit, designed for precise cutting of furniture panels, plywood, and other wood-based materials. Its 2600 mm sliding table and robust construction ensure repeatability and high-quality cuts.
Key features of the machine:
- Scoring unit with independent drive – eliminates chipping on laminates and veneers.
- Aluminium sliding carriage running on hardened steel round guides – rigidity and smooth feed.
- 2600 mm sliding table – secure handling of large and heavy panels.
- Main motor 5.5 kW – consistent cutting quality in continuous operation.
- 0–45° tilt range – versatility for cutting angled components.
- Extendable telescopic fence up to 3100 mm – quick, repeatable settings.
- Saw speeds: 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal for different materials.
- Cast iron base – absorbs vibrations and stabilises the cutting assembly.
Design and technology:
The construction is based on a torsion-resistant cast iron frame that stabilises the saw unit and minimises vibration. The aluminium carriage moves on hardened rods, ensuring long-term precision. An outrigger table facilitates handling of large formats without additional support. Adjustment mechanisms with clear readouts (including tilt angle indicated on a handwheel gauge) allow for fast and reliable settings.
Precision and work efficiency:
The MJ45-KB4 panel saw delivers clean edges thanks to its 125 × 20 mm scoring unit and stable guide geometry. The maximum cutting height of 90 mm at 90°, and 65 mm at 45°, allows processing a wide range of sizes and thicknesses. Two main saw speeds enable adjustment to material type, maintaining dimensional repeatability and minimising the need for rework.
Applications:
The machine is dedicated to workshops and production facilities seeking a stable panel saw with scoring unit for serial cutting of furniture and construction components. It meets the needs of enterprises that value quality, dimensional accuracy and reliability in multi-shift operation.
Standard equipment:
- Scoring unit with independent drive
- 2600 mm sliding table on rod guides
- Bevel angle indicator gauge
- Telescopic fence up to 3100 mm (mounting front/rear of outrigger table)
- User manual in Polish
- EC declaration of conformity
Optional equipment:
- Set of blades for wood and laminate
- Dust extraction and chip collection systems
- Board transport trolley
Hjdpfoywkc Djx Admsnk
Technical specifications:
SLIDING TABLE LENGTH: 2600 mm
CUTTING WIDTH: 1250 mm
SAW TILT: 0–45°
CUTTING HEIGHT AT 90°: 90 mm
CUTTING HEIGHT AT 45°: 56 mm
MAX. MAIN BLADE DIAMETER: 315 mm
MAX. SCORING BLADE DIAMETER: 125 mm
MAIN SAW SPEED: 4000/6000 rpm
SCORING SAW SPEED: 8000 rpm
MAIN MOTOR POWER S1/S6: 5.5 kW
SCORING UNIT MOTOR POWER S1/S6: 0.75 kW
WEIGHT: 650 kg
Palengviname jums paiešką: "cormak fm350n"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo





































































































































































