Noris Plastic Gmbh Mischanlage 5 Grav. Dosierungen pirkti naudotą (102 155)

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Blast container for blasting with glass beads, ceramics, corundum, chilled iron grit, garnet sand, etc. Blast container equipped with a fully covered screw conveyor floor and genuine abrasive recycling system. No sweeping, vacuuming, or shoveling of abrasive in the blasting chamber during the blasting process due to our closed-loop system. Abrasive cleaner: air separator with 4-way adjustable settings for air volume, flow speed, extraction proximity to the abrasive, and abrasive bed thickness. Electric vibrating screen for continuous removal of coarse contaminants. Bucket elevator with trapezoidal-thread spindle for belt tensioning and speed monitoring. Container lining made from 70 Shore, 4mm fabric-reinforced rubber for a service life of up to 30 years with proper use. Container can be fully opened on the side for easy forklift loading. Container can be upgraded with a crane roof hatch, floor reinforcement, or lateral blasting chamber extension. For stainless steel blasting, the container can be upgraded with a genuine magnetic drawer or a drum-type magnetic separator as well as stainless steel grating. Filter unit with service doors for easy maintenance, big bag dust collection, secondary H13/14 filter, and silencer. Blast vessel with pressure regulator and water separator. The container stands out for its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special 5-year warranty included on all key components of the blasting system. Kdjdpfx Asuwlzyjb Njp Safety features: door/gate limit switches, dead-man control, emergency lighting, viewing window in the blasting chamber, emergency stop inside the blast chamber and externally on the control cabinet, quick pressure relief for the blast vessel.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Plotis: 1350 mm Kdodpfsxy Rddox Ab Nsp Ilgis: 3500 mm Aukštis: 1200 mm Bendras svoris: 1200 kg Pavara: 2 x 2,4 kW Rėmas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 56 927 h, Funkcionalumas: visiškai funkcionalus, Gamintojas: ATM Recyclingsystems GmbH Tipas: ArnoBrik 15 Pagaminimo metai: 2001 Briketų diametras: 150 mm Techniniai duomenys Briketų diametras: 140 arba 150 mm Našumas: - Ketaus drožlės: 4,8–5,3 t/h - Plieno drožlės: 4–5 t/h - Mišri briketų gamyba: 4–5 t/h - Aliuminio drožlės: 1,6–1,8 t/h Mišri briketų gamyba: 4–4,5 t/h Padangų viela: 2,5–3 t/h Valandinis našumas priklauso nuo medžiagos Briketo tankis (plienas ir ketus): 5,5 kg/dm³ Darbinis slėgis: 300 bar Užimamas plotas (I x P x A): 13 500 x 6 500 x 2 000 mm Mašinos svoris: 30 t Pagrindinio cilindro jėga: 5 300 kN Alyvos poreikis: 2 800 litrų Pagrindinis variklis: 4 x 30 kW Bendra prijungimo galia (su priedais): apie 150 kW Briketo aukštis: 110–140 mm Briketo svoris (priklauso nuo medžiagos): apie 10–16 kg Ksdexy E H Hjpfx Ab Njdp Ciklo trukmė: apie 10 sek.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2001, Funkcionalumas: ribota funkcionalumas, Vietovė: Austrija Galima iš karto Ksdpfxsxy Hbxj Ab Nedp

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2001, Funkcionalumas: ribota funkcionalumas, Pagrindiniai matmenys: 2965 × 1000 × 570 mm (be sukimo įtaiso) Bendras svoris: 2 595 kg (be sukimo įtaiso) Darbinis slėgis: 100 bar Cilindro spaudimo jėga: 380 kN Ksdpfsxy E Siox Ab Njdp Didžiausias darbinis slėgis: 160 bar Didžiausia cilindro spaudimo jėga: 610 kN Žiočių atidarymas apytiksliai: 300 × 300 mm Pjovimo našumas: apvalus plienas Ø 75 mm; kvadratinis plienas 65 × 65 mm; vamzdis išorinis Ø 273 × 16 mm; IP-200, C-280, L-220 Pjovimo peilis: naudojamas iš abiejų pusių Pjovimo tarpas: reguliuojamas Sukimo įtaisas: sukimasis per hidraulinį variklį ir grandininę pavarą Vieta: Austrija Prieinama iš karto

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Z1015201800 Z1010880270 Ksdpjxy I D Uefx Ab Nodp ir t.t.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 064 mm, ruošinio svoris (maks.): 100 kg, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 60 W, aušinimo tipas: oras, bendras svoris: 135 kg, garantijos trukmė: 12 mėnesiai, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 220 mm, nuskaitymo srities plotis: 220 mm, X ašies eiga: 300 mm, Gravis Fiber Laser – Industrial Marking Laser Made in Germany | Automated & PLC-Controlled The Gravis fiber laser is an industrial laser marking system for metal, plastics, nameplates, and serial numbers. Developed and manufactured in Germany, it combines highest precision, robust mechanics, and flexible PLC control for continuous 24/7 production use. Technical Features • Power: 20 – 100 W • Galvo system with precise F-theta optics • Working area: variable (100×100 mm up to 300×300 mm) • Integrated PLC with TCP/IP communication Kjdpjxvtt Hsfx Ab Njdp • Flexible software solutions: LightBurn / EZCAD / Beam Construct • CE-certified, low maintenance, ready for immediate use ⸻ Advantages • Complete system "Made in Germany" – direct from the manufacturer • Custom machine construction & automation tailored to customer requirements • Integration into production lines (e.g., PLC or robot) • Perfect engraving results on stainless steel, aluminum, brass, plastic, tool steel, and more • German support, training & spare parts supply Delivery & Support • Delivery time: 4 – 6 weeks • Delivery, installation, and onboarding throughout Europe • Lifetime after-sales support Typical Applications • Marking of serial numbers and nameplates • Barcodes, QR codes, DataMatrix • Tooling and automotive industries • Electronics, plastics engineering, promotional items • Jewelry engraving, precision mechanics, contract marking

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 950 mm, statybinis aukštis: 300 mm, kėlimo aukštis: 1 650 mm, keliamoji galia: 1 500 kg, bendras svoris: 450 kg, bendras ilgis: 2 500 mm, bendras plotis: 800 mm, stalo plotis: 800 mm, stalo aukštis: 1 950 mm, stalo ilgis: 2 500 mm, transporto ilgis: 2 500 mm, transporto plotis: 1 200 mm, platformos plotis: 1 200 mm, platformos ilgis: 2 500 mm, vietos reikalavimas ilgis: 2 500 mm, reikalingas aukštis: 1 950 mm, reikalingas plotis: 1 200 mm, galia: 1,1 kW (1,50 AG), Įranga: dokumentacija / vadovas, Technical specification with the following main data: Kedjuhphvopfx Ab Njdp Load capacity 1,500 kg static distributed load Useful lift 1,650 mm Closed height 300 mm Overall height 1,950 mm Platform length 2,500 mm Platform width 1,200 mm Material Smooth sheet steel Lifting time approx. 35 sec. for full lift Lowering time depends on load Power supply 3 x 400 V / 50 Hz + protective earth, incl. 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm Solenoid voltage 24 V DC Degree of protection IP 54 (overall), solenoid valve and switch IP 65 Paint finish dust grey RAL 7037 Power unit location integrated in lift table Control box dead-man control incl. 2 m cable Total weight approx. 450 kg

Būklė: naujas, Gamybos metai: 2025, General: - Maximum temperature range: 150°C for oil (heat transfer fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Max. flow rate: 60 l/min - Max. pressure: 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity: approx. 20 litres - Fittings made of brass/stainless steel - Manual oil filling Kodpoddv Itsfx Ab Njdp - Mechanical level control - Indirect cooling system (shell and tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and Control: - Electronic PCB controller - Solid state relays - Safety thermostat - Sensor break monitoring - Power cable with plug Available in approx. 4 weeks!

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT Kdedeuggb Djpfx Ab Nep  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen Kjdpfx Ajw U N Ixsb Nodp - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Gamybos metai: 2017, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Krosnies korpuso matmenys Išoriniai matmenys: - apie 3.800 x 4.300 x 2.200 mm Krosnies vidiniai matmenys: - apie 2.440 x 1.400 x 1.200 mm Įkrova Įkrovos svoris: - 9 dėžės (savas svoris 50 kg/vnt.) - apie 250 kg medžiagos/dėžė - Krovimas 3x3 Techniniai duomenys - 1 dujinė rekuperatorinė degiklis - Nominali šiluminė galia 160 kW - Didž. leistina kameros krosnies temperatūra 720°C Kdjdjxcybkjpfx Ab Nep - Didž. leistina sudeginimo temperatūra 1.020°C - 1 temperatūros reguliavimo zona Temperatūros reguliavimo diapazonas - Kamros krosnis 480°C–700°C - Sudeginimas 850°C–1.000°C Tiekimo terpės - Gamtinės dujos L arba H - Dujų įėjimo slėgis 80 mbar - Įtampa 400 V - Dažnis 50 Hz - Prijungimo galia 8 kVA - Suspaustas oras 6 bar, sausas, be alyvos Medžiaga: pvz., žalvaris arba bronza

Gamybos metai: 2025, būklė: naujas, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression, and bending tests up to 5 kN. User-friendly Windows software for universal testing procedures; simple tests can also be performed without a PC. Made in Germany Standard equipment: • Machine with sensor (optionally between 50 N and 5 kN) • Accuracy class 0.5 • Basic Windows software • 2-year warranty Options available: • Comprehensive gripping devices (mechanical, pneumatic, and hydraulic) such as: Compression plates Screw and wedge grips Bending fixtures Customized versions according to customer specifications • Extensometers / strain gauges: Clip-on and long-travel transducers • Temperature and climate chamber Ksdpfxod H S Rrs Ab Nsdp • Windows software PM-Soft-Smart for universal applications, freely programmable • Commissioning and training

Būklė: naudotas, Elektromotor AC Motoren GmbH Typ AOM 225S-4 400/690V 50Hz 37 kW 1475 U/min 440V 60Hz 44,4 kW 1770 U/min 228A Ksdpfxodcb U Te Ab Nsdp Schutzart IP55

Būklė: naudotas, mašinos/transporto priemonės numeris: 07040478, Elektromotor AC Motoren GmbH Kdjdpfxoc Sqvlo Ab Nsp Typ: AH 315 MA-4 400/690V 50Hz, 132 kW, 1485 U/min 440V 60Hz, 158 kW, 1782 U/min 228A Schutzart IP55 Komplett mit Kühler der Marke Wistro 380-500V 50/60Hz, 255/370W

Būklė: naujas, Gamybos metai: 2026, Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 500M is a conventional milling machine, ideal for training and production purposes. The Heidenhain Positip 8016 Active digital display allows for precise positioning, as well as operations such as creating and referencing a bolt hole circle. Control System: Heidenhain Positip 8016 Active digital display Spindle Speed: 0 - 3000 rpm, geometrically tiered direct-drive gearbox with 16 speed steps for maximum torque and milling performance Feed Rate: 0 to 500 mm/min, steplessly adjustable Rapid Traverse: 1.5 m/min Quill: Extendable quill, vertical 80 mm, SK40, optional: horizontal working spindle or horizontal quill (extendable approx. 100 mm) Drawbar System: hydraulic drawbar system – DIN 69872 optional: DIN 2080 Axes Travel: X/Y/Z 500/400/400 mm Table: Fixed angle table, 800x480 mm Equipment: • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Movable chip tray • Machine lamp • Centralized lubrication • Z-axis bellows Options: Kdedpfx Aboh Su Ips Njp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc. Further technical data can be found in the attached data sheet.

Būklė: geras (naudotas), Gamybos metai: 1984, Tiede Universal U550 GW Magnetic Crack Detector Manufacturer: Tiede GmbH Model: U550 GW Type: Magnetic Crack Detection Device Rated Operating Current I 5400 A alternating current (seat variant) or 3800 A effective alternating current, adjustable in 8 stages Magnetization: Ø 8000 Aw full-wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile Magnetizing Coil Light aperture Ø 800 Throughput Ø: 5000 Aw with AC, adjustable in 8 steps, measured according to DIN 54131 Kedpfxoifpg As Ab Nsdp Year of manufacture: 1984 Accessories/Special Equipment: - Electronic magnetization controls - Demagnetization unit - Support rollers - Darkening cabin Main machine dimensions: Overall length: 8,000 mm Overall width: 2,500 mm Overall height: 2,500 mm Working area notes: Nominal width: approx. 5,500 mm Area of application: Crankshaft testing. Item condition: used For further technical details please refer to the machine data sheet. Financing through our partner bank is also possible. komplett-konzept.leasingo.de More new and used items available in our shop! International shipping costs on request!

Gamybos metai: 2021, būklė: naujas, For sale: a workshop crane. The crane is brand new and unused. Premium Workshop Crane 2051510WKG10 Design: splayed legs Maximum lifting capacity in position A1: 1,000 kg Kodpshygn Iofx Ab Njdp Lifting height per pump stroke with/without load: 6/20 mm Weight: 130 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 070 mm, ruošinio svoris (maks.): 150 kg, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 50 W, aušinimo tipas: oras, darbo diapazonas: 175 mm, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 175 mm, nuskaitymo srities plotis: 175 mm, stalo aukštis: 710 mm, stalo ilgis: 710 mm, stalo plotis: 400 mm, lazerio bangos ilgis: 1 070 nm, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 35 °C, įėjimo dažnis: 50 Hz, ekstrakcijos antgalio skersmuo: 50 mm, darbinis plotis: 110 mm, Įranga: kabina, IPG laser source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Work platform: stainless steel, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber laser: Kdjdpfx Aeyim S Iob Njp - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, travel up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: texts, logos, QR/data matrix, barcodes - Matrix function for multiple processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35°C Condition: - New machine - CE compliant - Made in Germany

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 355 mm, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 6 W, aušinimo tipas: oras, bendras plotis: 920 mm, bendras aukštis: 1 760 mm, bendras ilgis: 940 mm, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 110 mm, nuskaitymo srities plotis: 110 mm, Z ašies eigos atstumas: 500 mm, stalo ilgis: 710 mm, stalo plotis: 400 mm, lazerio bangos ilgis: 355 nm, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 35 °C, įėjimo dažnis: 50 Hz, ekstrakcijos antgalio skersmuo: 50 mm, darbinis plotis: 110 mm, Įranga: kabina, UV Fiber Laser 355 nm, 6 W –NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source: IPG – Made in Germany Laser Safety Class 1 Kdjdpfx Absyiz Dzj Nep Workstation: - Combined sitting/standing workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser safety glass for unobstructed view - Bright workspace illumination - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, bolted for easy part insertion - Motorized Z-axis: Travel range 500 mm (focus depends on lens) - Exhaust port DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door open monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser Class 2) - Laser head manually adjustable in Y-axis Scanner & Optics: - F-Theta lens F = 160 mm, anti-reflective protection glass - Marking field: 110 × 110 mm Control: - Windows 11 - 19"" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: texts, logos, QR/Datamatrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 070 mm, ruošinio svoris (maks.): 25 kg, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 50 W, aušinimo tipas: oras, bendras plotis: 1 400 mm, bendras aukštis: 2 000 mm, bendras ilgis: 1 500 mm, darbo diapazonas: 280 mm, aukščio reguliavimo tipas: elektrinis, nuskaitymo srities ilgis: 280 mm, nuskaitymo srities plotis: 280 mm, X ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, stalo ilgis: 1 000 mm, stalo plotis: 1 000 mm, reikalingas plotis: 1 400 mm, reikalingas aukštis: 2 000 mm, lazerio bangos ilgis: 1 070 nm, vietos reikalavimas ilgis: 1 500 mm, aplinkos temperatūra (min.): 15 °C, aplinkos temperatūra (maks.): 35 °C, įėjimo dažnis: 50 Hz, ekstrakcijos antgalio skersmuo: 50 mm, darbinis plotis: 280 mm, Įranga: kabina, Automated fiber laser system with SK-LASER workstation and rotary table for serial production. Laser class 1 · CE · Made in Germany System: - Complete system: fiber laser + workstation + rotary table - 2 processing positions with partition (400 mm) - Access protection via light curtain - 2-stroke operation, 180° rotation Equipment: - Workstation XXL: W 1,400 × H 2,000 × D 1,500 mm - Option: high-speed scan head Superscan Rotary Table & Axes: - Rotary table Ø 1,000 mm, 25 mm hole grid - Automatic production cycle - 2 × Z-axis 400 mm, 1 × X-axis 600 mm - Ball screw drive, load capacity up to 25 kg Laser – IPG - 50 W, 1.0 mJ - 50–250 kHz, 100 ns - 1060–1070 nm, M² < 1.2 - Air-cooled, < 400 W Optics - F-Theta f = 420 mm - Field approx. 280 × 280 mm - Pilot laser + distance laser Control Kdjdpfx Asyil Dvjb Njp - Windows 11 Pro, SSD, 23" monitor - Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR/DM codes, serial numbers, material parameters Workstation: - Seated/standing workstation - Extraction nozzle DN50 - Emergency stop, 2-channel interlock, safety relay Operation: - 230 V / 50 Hz - 15–35 °C Condition: - New machine - CE-compliant · Made in Germany

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, This UV printer replaces conventional laser printers – also capable of color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS10157V C M Y K LC LM + White + Varnish option included Print head: Epson TX800 2690 dpi max. Includes printer and image editing software Dimensions: 2.30*1.98*1.34 m Weight: 650 kg 360-degree application: Bottles/round objects (surcharge) A1+ size 100x150 cm and 170 mm print height 8x500ml ink can be supplied! (surcharge) Ksdjd Hydhepfx Ab Nsdp + VARNISH FUNCTION included Software setup and printer introduction available on request, Germany/Europe-wide (surcharge) Print videos etc. can be sent by email/WhatsApp upon request.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, This UV printer replaces conventional laser printers – including color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS1015 C M Y K LC LM + White Print head: Epson TX800 Maximum resolution: 2690 dpi Includes software for printer operation and image editing Dimensions: 2.30*1.98*1.34 m Weight: 650 kg 360-degree applications: Bottles/round objects (optional at extra cost) A1+ format: 100x150 cm and up to 70 mm print height possible 7 x 500 ml ink can be supplied (optional at extra cost) + Varnish function available Software setup and printer instruction available on request for Germany/Europe (for an additional charge). Printing videos, etc., can be sent by email or WhatsApp upon request. Kdodpfx Asd Ew A Uob Nop

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, This UV printer replaces conventional laser printers – also suitable for color printing on glass, wood, textiles, plastic, metal, and many other materials. C M Y K LC LM + W + V New model: PS2513 Air table Printhead: Epson TX800 Maximum resolution: 2690 dpi Includes printer and image editing software Dimensions: 2.85 x 1.9 x 0.74 x 1.55 m Weight: 800 kg Print area: 250 x 130 cm and up to 70 mm print height possible Kjdpfxod Hbl Ds Ab Nedp 8 x 500 ml ink can be supplied! (at extra cost) + VARNISH FUNCTION INCLUDED Software setup and printer training available on request, Germany/Europe-wide (additional charge) Printing videos etc. can be sent via email/WhatsApp upon request.