Dvigubas juostinis šlifuoklis

Weiz GmbH DBSM-3.500-4

Būklė: naudotas, Drilling capacity in steel (diameter): 40 mm Throat depth: 325 mm Drilling stroke: 170 mm Table clamping surface: 730 x 590 mm Speed range: 130 - 1200 rpm Feed rate: 0.09 - 0.16 - 0.28 mm/rev Tool holder: MT 4 Total power requirement: 1.8 kW Machine weight approx.: 0.7 t Dimensions (L x W x H): 1.2 x 0.8 x 2.15 m Drilling machine equipped with: Bwjdjwn T A Uspfx Aahsi - feed unit - 2 speed gearbox - forward/reverse operation - foot switch - machine lamp

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Bodpfofxyhfox Aahewi Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Būklė: geras (naudotas), 10,000 units of Insert Gratings / Wire Mesh Gratings for Pallet Racking, galvanized Insert gratings available in various sizes, mesh widths, load bars, and weight capacities: Negotiable price: from €15.00 net per m² ex stock. Larger quantities available on request! Specifications: Insert Grating Mesh Size Load Bar Load Bar Direction Bedsd Hvvgspfx Aahjwi 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99.5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Used goods in very good condition, see pictures. Goods are in stock. Transport available on request. Viewing possible anytime by appointment. Further information on request. Constantly over 5000 linear meters of pallet racking from various manufacturers in stock. (Subject to change and errors in technical data, details and prices, as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.) Purchase / Sale: We are continuously looking for and offering various items from different sectors Clean-swept company clearances Liquidations Fast - flexible - effective! We also clear and/or dispose for insolvency administrators. Simply contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo!

Gamybos metai: 2018, būklė: labai geros būklės (naudotas),

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Drive power: 22 kW Bwsdjgpxc Sspfx Aahoi Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1995, darbinis plotis: 4 100 mm, gerklės gylis: 250 mm, bendras svoris: 20 000 kg, spaudimo jėga: 200 t, Hämmerle BM200-4100. 2023 metais įrenginys buvo išmontuotas senoje gamykloje, tačiau naujoje jau nebuvo sumontuotas ir paleistas. Nuo to laiko įrenginys laikomas sandėlyje. Pridedami visi priedai ir dokumentacija. Įrenginį galima apžiūrėti bet kada, jis iš karto paruoštas pakrovimui. Visi duomenys yra nuotraukose... Įrankių nėra, nes jie tiko naujai mašinai. Bedpfx Ajwa S Dnjahowi

Būklė: naujas, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: 95–240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke components must be processed with constant force. Convincing technology - Long and precise spindle guidance for maximum dimensional accuracy - Hardened and ground piston rod for virtually unlimited service life - Double-acting cylinder with end position cushioning on both sides - Dual guide rings in the piston for consistent, smooth operation - Oil-resistant sealing elements Key features of the PND series - Spindle secured against rotation - On the PND 85/S, spindle return is only via a single cylinder chamber for additional air saving - Working height fine adjustment is simple, quick, and precise in two stages: – Basic adjustment by simply loosening the clamping screws on the column – Precision fine-tuning via the stroke limit ring on the piston rod Additional advantage: Bsdpfx Asfv Awasahjwi Faster cycle time and reduced air consumption

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, X ašies eiga: 6 500 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 300 mm, padavimo ilgis X ašis: 10 000 mm, padavimo eiga Y ašimi: 10 000 mm, padavimo ilgis Z ašis: 10 000 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, veleno greitis (maks.): 7 000 aps./min, veleno greitis (min.): 20 aps./min, stalo ilgis: 8 000 mm, stalo plotis: 1 100 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2016 Travel / Movements: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Transversal (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on table surface: 7 units T-slot width: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) Bwsdpexvx Amsfx Aahoi RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 43 kW (100% duty cycle) Spindle speed range: Spindle speed max.: 20 - 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axes mm/min: 2 – 10,000 Max. Rapid traverse speed: X, Y, and Z axes mm/min: 35,000 Footprint SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, diagonal H207 Adapter – angle milling head SK50 with Hirth gearing Automatic tool changer with 60 magazine slots Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for profitable entry into our product range. The machines available in this line are procured by us following a strict selection process and undergo thorough inspection (Deep-Dive-Check). After extensive cleaning, all identified obvious defects and faults are professionally rectified by our expert service team.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Pressure: 45 tons Installation height: 205/305 mm Table: 700 x 450 mm Ram: 700 x 360 mm Ram adjustment: 50 mm Stroke: 10 - 50 mm Bedegfvnnjpfx Aahjwi Strokes per minute: 80 - 400 Power requirement: 11 kW Weight: 7,200 kg Height: 3,100 mm Siemens S7 control Gripper feeder

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 475 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 400 mm, ruošinio svoris (maks.): 200 kg, sukimosi greitis (maks.): 42 000 aps./min, stalo skersmuo: 450 mm, 5-Axis Röders Tec RXP800DS -completely overhauled- The machine is fully overhauled, inspected, and calibrated at our facility. The machine once again meets new-machine tolerances! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Passage height: 500 mm Tool changer: 52 stations Spindle: HSK40E, max. 42,000 rpm Tool measurement laser for tool inspection Handheld control unit Minimum quantity lubrication Prepared for extraction system (e.g., for graphite machining) Spindle compensation Precision package Control system: Röders RMS6, current version Bedpfsvvlmcox Aahowi The machine can be inspected in fully operational condition at any time. For further information on the type and scope of our overhauled machines, please visit our website or our Hüttmann YouTube channel.