Jlh Saws S-230M Nc pirkti naudotą (73 856)

Būklė: naudotas, Gamybos metai: 2008, Eigos: X ašis = 350 mm Y ašis = 250 mm Z ašis = 220 mm su aušintuvu Pilnai veikiantis Ljdpfjw Swd Aox Am Hork

Būklė: naudotas, Gamybos metai: 2012, Travel distance: X 500 mm Y 350 mm Z 300 mm Submerged machine (water bath) Ljdpjuu Dl Refx Am Hork Automatic wire threading

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 430 mm, X ašies eiga: 275 mm, Z ašies eigos atstumas: 1 070 mm, sūpynės skersmuo virš skersinio stumdomo: 680 mm, Version with driven tools Lodowtraiepfx Am Hjrk TECHNICAL DETAILS Spindle bore: 92 mm Bar capacity: 80 mm X-axis: 275 mm Z-axis: 1,070 mm Turning length: 1,000 mm Turning diameter: 430 mm Swing diameter over bed: 680 mm Number of tool holders: 12 (driven) MACHINE DETAILS Three-jaw chuck: RÖHM D 315 mm Control: Heidenhain Pilot 3190 EQUIPMENT - Hydraulic clamping cylinder

Būklė: naujas, Gamybos metai: 2025, Cutting diameter: 325 mm Saw band length: 4900 mm Cutting width: 400 mm Round material: 325 mm Lrodpfowp Tnaox Am Hjk Flat material: 400x325 mm Saw band dimensions: 4900x34x1.1 mm - New machine - - Fully automatic - - Mitre band saw - - Linear-guided - with hydraulic feed system, Cutting length and quantity input via NC control, hydraulic vice, coolant system, and hydraulic/mechanical blade tensioning * For more information regarding the exact standard configuration and available options, please visit our website or contact us directly *

Būklė: naudotas, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully inspected before delivery ----- Technical Data Summary (For any additional included accessories, please inquire) Item 1: Cross-Cut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Radial travel, pneumatically controlled, 8 positions, e.g. for edge rounding from above > Laser guide light for cut section identification Item 2: Rounding Unit, Horizontal Lower Position ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial movement mechanically linked with cross-cut saw > Radial travel, pneumatically controlled (on/off) NC-Controlled Length Stop ----- > Length: 3,500 mm Ljdpfxjvu Hghj Am Hork > Electronic length stop Item 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3,500 rpm > Max. tool circle diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Climb/Counter-Climb Cutting) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 7.5 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash support rail from above in the area of the vertical right profiling unit and profiling spindle. Item 6: Horizontal Upper Profile Milling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool circle diameter: 130 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8 positions Item 7: 3rd Profiling Spindle (Hardware Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial travel: 115 mm, 8 positions > Radial travel: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool circle diameter: 210 mm > Motor power: 3.0 kW Item 8: Bottom Profile Milling/Grooving Unit ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Būklė: naudotas, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and fully inspected before delivery. Technical Data Overview (additional accessories possibly included; please inquire separately) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, horizontally adjustable steplessly > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for saw cut detection > NC length stop, mounted on slot table included Positioning of cross-cut saw integrated in the control system. > Length: 3500 mm Pos. 2: Tenoning and slot spindle ----- > Number of tools: variable, stepless NC-axis adjustment Ledpfx Aovu Hfqem Hork > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st Profiling spindle (climb & counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless NC-axis adjustment > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless 254 mm NC-axis adjustment > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Muntin guide consisting of: Guide rail on the stop (climb spindle section), muntin support bar from above in the area of the vertical right profiling unit and profiling spindle. Pos. 5: Horizontal profiling unit, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool diameter: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Additional Features ----- > Online-capable > Rebate device for tear-free rebating > Double-parts package > Return system for one-man operation: swivel belt > Screen control > Tilt window unit > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without working tools No original pictures available yet. Images show an identical machine from our archive. ----- Price for the above-mentioned machine on request! ----- Option with surcharge: EUR 6,500.00 Note...

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 4 500 mm, bendras plotis: 7 000 mm, pjovimo ilgis (maks.): 3 500 mm, pjovimo plotis (maks.): 2 000 mm, X ašies padavimo greitis: 60 000 m/min, Y ašies padavimo greitis: 40 000 m/min, padavimo greitis Z ašis: 20 000 m/min, ašies variklio galia: 17 000 W, Skaitmeniniu būdu valdomas pjovimo centras su 4 interpoliuotomis ašimis, stacionariu darbo stalu ir besisukančia galva; įrenginys specialiai sukurtas granito, marmuro, dirbtinio akmens ir panašių medžiagų pjovimui/formavimui (tiek įpjaunant, tiek laipsniškai pjaunant). Ledovtdztjpfx Am Herk

Būklė: paruoštas naudoti (naudotas), Bosch PS200 CNC power supply Philips PE 2189/01 NC 9415 DC 20 - 40V 235W, used, normal signs of wear, 100% functional, scope of delivery as shown in photos Ledoulqg Nspfx Am Hjrk

Būklė: paruoštas naudoti (naudotas), Unipo Electronic 7LPIP9220211A UFP įvesties modulis B2T-NC FIMI, naudotas, su nežymiais naudojimo ženklais, 100% veikiantis, komplektacija pagal nuotraukas. Lsdexaidpepfx Am Hork

Gamybos metai: 2022, būklė: naujas, Grinding diameter: 260 mm Grinding length: 1000 mm Center height: 130 mm Grinding wheel dimensions: 400x60x127 mm Grinding wheel speed: 1700, 1900, 2200 rpm Grinding spindle head swiveling: +/- 30 degrees Table swiveling: +/- 9 degrees Ljdpfx Asg N Nh Dem Hsrk Tailstock spindle taper: 4 MT Grinding spindle motor: 4 kW Hydraulic motor: 1.5 kW Workpiece spindle motor: 0.37 kW Net weight: 2400 kg Gross weight: 2950 kg PLC control: Siemens S7 Tailstock quill stroke: pneumatic via foot switch Control panel: New Rittal operating panel with Siemens touchscreen display Centre points: 2 Grinding wheel flanges: 2 New external cylindrical grinding machine, manufacturer Kraft, model URS 1000, year of manufacture 2022 For the construction of this machine, an unused base frame of a hydraulically operated URS 1000 and unused cast components were utilized. The offered machine, URS 1000 CNC, is equipped with 2-axis ball screw spindles, axis drives, and a PLC control. User-friendly Siemens S7-1200 PLC is used as the control system. The entire machine is equipped with an effective partial enclosure. Multiple diameters can be easily programmed and ground with the Siemens PLC S7. The machine is also suitable for the following operations: longitudinal grinding, plunge grinding, incremental plunge grinding, automatic dressing, and dressing amount compensation. Up to 30 individual programs can be stored and 10 individual programs (10 diameters) can be linked in one cycle. The operator can interrupt the cycle at any time to measure the workpiece, enter compensation, and grind the rest to final dimension. The control is very simple to operate! The production of curves, radii, and ellipses is not possible with this control. The machine’s performance data should be considered provisional, as they are based on the original hydraulically operated machine. Further technical data as well as standard and special accessories can be found in the PDF attachment. Take advantage of attractive leasing and hire-purchase conditions offered by ABC Leasing. Please ask us for more details. Of course, we also offer delivery free to your premises, installation/commissioning, and handover ready for operation, including training on the control system.

Būklė: naujas, Gamybos metai: 2023, Horizontal bending machine AH 20 NC, 1000 mm back gauge - ZOPF make - with semi-automatic touch control - NC control - incl. bending pins - incl. tool holder for dies and foot pedal - Pressing force: 20 tons - Infinitely adjustable stroke setting - Working speed adjustable Max. working stroke: 10 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 150 mm - Motor power: 2.2 kW Lodpfx Amswyt Tqj Hsrk - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table design - Weight: 800 kg - Bending capacities: Flat material up to 150x12 mm Round tube up to 48 mm - Bending pressure: 20 tons - with controlled back gauge, 1000 mm - with tools - 400 Volt, 50 Hz, 3-phase

Būklė: geras (naudotas), tekėjimo ilgis: 6 000 mm, veleno skylė: 260 mm, Swing diameter over bed Ø: 850 mm Swing diameter over carriage: 500 mm Turning length: 6000 mm Spindle bore: 260 mm Ledpfowvtg Aox Am Hjrk Spindle power: 28 kW Bed width: 650 mm Quill stroke: 300 mm Spindle taper: 6 MT Workpiece weight: 5000 kg Length: 10000 mm Width: 2100 mm Height: 2600 mm Weight: 12800 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, 3 Rotary Transfer Machines + 3 Interlinking Robots OVERVIEW - Bar feeder - Rotary transfer machine 1 (Sawing + Machining, Clamping 1) - Rotary transfer machine 2 (Machining, Clamping 2) - Placement onto conveyor belt - Marking - Deburring system - Stacking cell with rejection chute for measurement parts TECHNICAL DETAILS Process Description Step 1: Manual loading of bars onto the bar magazine Step 2: Automatic feeding of the bar and cut-off of the workpiece Step 3: Robot picks up the workpiece from the saw clamp and transfers it to the fixture of rotary transfer machine 1 (station 1) Rotary Transfer Machine 1 (Machining Clamping 1) Station 2: Profile milling left and right Station 3: Profile milling top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), tapping M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second system Rotary Transfer Machine 2 (Machining Clamping 2) Lredpfowqf R Nox Am Hek Station 1: Robot picks up part from station 6 in system 1 and loads it into the fixture of the second rotary transfer machine Station 2: Profile milling bottom Station 3: Slot milling (2x) Station 4: Profile milling bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar Feeder Bar magazine: for 2,000 - 6,000 mm bar material Magazine width: approx. 2,100 mm Loading height: approx. 1,200 mm Part buffer: 10 bars Rotary Transfer Machine 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feeds: 14+1+5 NC axes Rotary Transfer Machine 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feeds: 9+1+3 NC axes Discharge Conveyor Chain conveyor: Workpiece carriers made of plastic Incline: approx. 3° Length: 8,000 mm Part detection: at loading station / marking station / unloading station Rotary Transfer Machine 3 - SEMA REA 30/5-6S-NC-R Number of deburring positions: 5 Control: Siemens Simatic S7 Feeding station: 1 Machining units: 6 Extension of deburring system: Blowing off workpieces Robot: for loading and unloading the deburring system, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Rated power: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Rated power: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Rated power: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Būklė: naudotas, Gamybos metai: 1980, Workpiece diameter 600 mm Workpiece weight 400 kg Workpiece height 300 mm Total power requirement 35 kW Machine weight approx. 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year of manufacture 1980 Serial No. 169371080 _____ Grinding range: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Table speed, steplessly variable: 20 - 80 rpm Swing diameter approx.: 800 mm Maximum grinding height above magnet: approx. 300 mm Vertical travel of grinding head: 220 mm Cross travel of grinding slide: 320 mm Maximum table load: 400 kg Automatic vertical feed: 0.01 - 0.2 mm/stroke Grinding spindle speeds, steplessly variable: 1,000 - 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive, max.: approx. 28 kW Total connected load: 35 kW - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment - Control panel mounted on the machine with adjustable stepless grinding spindle speed (potentiometer) with analog display of cutting speed in m/sec and ammeter - Stepless table speed, stepless cross feed speed of the grinding slide, and stepless vertical infeed of the grinding wheel with roughing/finishing/spark-out, each adjustable via potentiometer, as well as with a dressing cycle timer for switching rapid vertical traverse to the grinding slide intermittently - Hand control panel with push buttons for manual control of the machine, e.g. dresser forward/back, cross slide forward/back or crawl feed, vertical slide up/down or crawl feed - 2 preset counters for setting preliminary and finish sizes with automatic shut-off - Selector switch +1µ/-1µ, digital display of Y-axis - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and pre-settable dressing stroke - Fitted normal-pole magnet approx. 600 mm Ø - Separate free-standing electrical cabinet and separate small coolant pump Condition: Satisfactory to good – ready for demonstration under power / Ideal for tool room jobs, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Here is the link to the video: Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Lredot Abrwepfx Am Hok Year 1980 Ser.-Nr. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing diameter approx.: 800 mm Table speeds, infinitely variable: 20 – 80 rpm Max. grinding height above table approx. ...

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Vamzdžio skersmuo (maks.): 51 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 220 mm, galia: 11,5 kW (15,64 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, garantijos trukmė: 24 mėnesiai, pavaros tipas: Inverter, darbinis greitis: 38 mm/s, slėgis: 150 juosta, sienelės storis: 3 mm, darbinis ilgis: 3 000 mm, Įranga: dokumentacija / vadovas, 51x3mm NC Tipi Boru Bükme Makinesi “Atlas” boru bükme makineleri NC (Sayısal Kumandalı) yapılara sahiptir. Bu tip boru bükücülerde tüm sıkıştırma ve itme işlemleri için hidrolik ve pnömatik sistemler kullanılmaktadır. Atlas serisi, NB, NBR ve NBRF olmak üzere 3 farklı modelden oluşur. NB serisi otomatik olarak bükme işlemi yapar. NBR serisi otomatik olarak bükme ve döndürme işlemlerini gerçekleştirir. NBRF serisi ise otomatik olarak bükme, döndürme ve besleme işlemlerini gerçekleştirir. A.C servo motor kontrolü, NBR ve NBRF serilerinde yarı otomatik bükme yeteneği sunar. Ergonomik yükleme yüksekliği sayesinde makine, iş sağlığı ve güvenliği talimatlarına uygun olup ergonomi kaynaklı sorunları önler. Büküm projelerinizin sonuçlarını optimize etmek için geliştirilebilir program ayarları bulunmaktadır. Enerji tasarruf modu sayesinde enerji verimliliğiniz artacak, doğa ve geleceğimiz korunacaktır. İnvertör kontrol sistemi, yeni nesil hassas bükme sistemiyle bükme projelerinizi optimum şekilde gerçekleştirmenize yardımcı olur. Lrjdpfx Aevwg Evom Hek Powerbend modu, zorlu malzemelerde bükme işlemini kolaylaştırır. Kullanıcı dostu, yeni projelere hızla başlamanızı sağlayan kolay ve hızlı öğrenilebilen bir ara yüze sahiptir. Minimum 7 inç dokunmatik ekranlı HMI ile kolay kullanım sağlar. Linear raylar sayesinde minimum sürtünme ile hızlı ve hassas bükme imkanı sunar. Bükme kafasının dönebilir olması sayesinde esnek bükme kabiliyeti sağlar. Titreşimsiz yapı sayesinde bükme hassasiyeti en üst seviyede olur. Kullanıcı dostu hata uyarıları ile sorunların anlaşılması ve çözülmesi kolaydır, iş sürekliliğini destekler. Silecek, bilyalı kalıp ve diğer sistemlerle yüksek kaliteli bükme yapılabilir.

Būklė: naudotas, Gamybos metai: 1981, x-travel: 650 mm y-travel: 450 mm Workpiece height: 585 mm Control: ADCOS CNC 400 Total power requirement: 15 kW Machine weight approx.: 5000 kg Space requirement approx.: m H A U S E R (Switzerland) CNC-controlled double-column coordinate grinding machine Model: S 40 – CNC 311 / ADCOS 400 CNC Year of manufacture: 1981 / modernised in 2008 #0125 Table size approx.: 630 x 770 mm Table load capacity approx.: 500 kg Lrodpfx Aet Hw S Ujm Hjk Table longitudinal travel max. (X): 650 mm Grinding head cross travel max. (Y): 450 mm Vertical adjustment of cross beam max. (W): 500 mm Grinding spindle stroke max. (Z): 140 mm Grinding head stroke rate (4Hz): 0.5–12 m/min Vertical clearance between table/spindle: 0–585 mm Clearance between columns: 750 mm Taper grinding max.: 16° Grinding diameter (bore): approx. 230/360 mm 18 spindle speeds, infinitely variable depending on spindle motor: 4,500–80,000 rpm Fine feed rates in X and Y axes and W axis: 0.5–1,500 / 3,000 / 800 mm/min Planetary rotation speed (C-axis): 5–250 rpm Total drive approx.: 15 kW – 400 V – 50 Hz Machine weight approx.: 5,000 kg Accessories / special equipment: • CNC path control replaced in 2007 with an ADCOS CNC control, model CNC 400, with large screen and direct programming at the control panel, with electronic handwheel for fine adjustment of axes: X = table longitudinal, Y = grinding head cross, Z = quill vertically/stroke, C = rotary axis spindle/quill, U = automatic feed, W = cross beam vertical adjustment • Z-axis as rapid traverse for shorter machining times, plunge grinding, face grinding, preselection of reversals (approach + teach-in), and continuously variable stroke speed, acting as a 3rd positioning axis • U-axis as manual and controlled feed axis (radial), at the grinding head, with electronic display of infeed amount • 1 grinding motor built in with spindle speed approx. 30,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • Separate coolant system with belt filter, electrical control cabinet and switch cabinet free-standing, separate hydraulics, central lubrication, dust extraction, and much more Condition: very good, demonstration-ready under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1987, x-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 485 mm Control: ELESTA CNC 314 Total power requirement: 10 kW Machine weight approx.: 4,000 kg Space requirement approx.: [please specify dimensions] m H A U S E R (Switzerland) CNC controlled coordinate grinding machine Model: S 3 – CNC 314 Year of manufacture: 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx.: 600 x 380 mm Table load capacity approx.: 300 kg Maximum longitudinal table travel (X): 400 mm Maximum cross table travel (Y): 250 mm Maximum vertical adjustment of grinding slide (W): 450 mm Maximum grinding spindle stroke (Z): 120 mm Grinding head stroke, hydraulic: 15 - 7,500 mm/min Installation height table/grinding spindle min./max.: -75 / +485 mm Grinding spindle overhang: 350 mm Maximum angular grinding: 16° Maximum bore grinding diameter approx.: 230 mm 18 spindle speeds, depending on spindle motor Continuously variable: 4,500–80,000 rpm Planetary rotation speed (C), continuously variable: 5–250 rpm U-axis, radial feed: 6 mm Total drive approx.: 10 kW - 380 V – 50 Hz Machine weight approx.: 4,000 kg Ljdpfx Aet Hw Txjm Hsrk Accessories / Special Features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor for 4 axes (=XYC+U-axis), interpolation in 2.5 dimensions (XYC). The U-axis is a feed axis and is not interpolatable. Teach-in programming directly on the machine, with various subprograms, as well as manual movement of the axes at the control panel or with electronic hand unit. Separate digital readout for Z-axis • U-axis as manual and controlled radial feed axis at the grinding head, with digital readout of feed size • 2 grinding motors #5674 and 3980 up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact monitoring device KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system • Free-standing coolant system with belt filter, separate hydraulic unit and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock, as inspected Payment: strictly net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1984, Pressure 500 t Passage width 750 mm Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Lodpfxot Hwpyj Am Hjrk Space requirement approx. ... m HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport device around the right column, table size 400 x 740 mm, max. installation height 200 mm

Būklė: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 250 mm Workpiece height mm Control system CNC 314 ELESTA Total power requirement 15 kW Machine weight approx. 5500 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Type S 3 – CNC 314 Year of manufacture approx. 1990 # S 32086 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Lsdpfx Ajt Hxcnom Herk Table travel longitudinal max. (X) 400 mm Table travel cross max. (Y) 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head slide stroke, hydraulic 15 – 12,000 mm/min Height between table and grinding spindle min./max. -75 / +485 mm Projection of grinding spindle 350 mm Conical grinding max. 16° Grinding Ø, bore max. approx. 230 mm 18 spindle speeds, depending on spindle motor steplessly adjustable 4,500–80,000 rpm Planetary speed (C), steplessly adjustable 5–250 rpm U-axis, radial infeed 6 mm Total drive approx. 15 kW – 400 V – 50 Hz Weight/Total weight approx. 4,000 / 5,500 kg Accessories / Special equipment: • CNC path control system type CNC 314 (ELESTA –POSELESTA II) with monitor, for 4 axes (=X Y C + U-axis), with circular and linear interpolation in 2 ½ dimensions (X Y + C). Teach-in programming directly on the machine. Error messages, RS 232 interface with various subprograms, as well as manual axis movement via control panel or with electronic hand-held unit. • Separate digital readout for the Z-axis, Z-axis with rapid traverse device • Programmable C-axis for simple contours and pockets, grinding of radii • U-axis as manual and controlled infeed axis, radially mounted on the grinding head with digital readout, automatically grinds varying bore diameters • 2 grinding motors up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system Krafft Buer • Separate coolant system with band filter, separate hydraulic unit with cooler • Separate electrical cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: very good / demonstration-ready under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, MASĖS įmonės kampinis konvejeris parduodamas: Tipas NC - SPEC 500/1800 x 600 Įleidimo dalis: 500 mm Pakilimo juosta: 1800 mm Naudojamas plotis: 600 mm, bendras plotis: 750 mm Juostos greitis pastovus – 6 m/min Lrodpfx Ajw Nrpbom Hsk Mobilus pagrindas su ratukais ir stabdžiais Išleidimo aukštis: maks. 1500 mm, min. 1100 mm Šoninis vedimas: 60 mm PU juosta su 30 mm aukščio gembėmis, atspari temperatūrai nuo -10 °C iki +90 °C Variklio apsaugos jungiklis su 5 m kabeliu ir CEE kištuku

Būklė: naujas, Gamybos metai: 2025, Ring bending machine manufacturer Zopf Model ZB 100/3 H - NC controlled - Three driven rollers with knurled surface - Hydraulic adjustment of the upper roller - Horizontal and vertical working positions - Shafts mounted with tapered roller bearings Lroded Ey A Aopfx Am Hok - Use of interchangeable slideways on the guide carriage - Roller diameter: 215 mm - Shaft diameter: 60 mm - Shaft speed: 6 rpm - Drive motor: 1.5 kW - Hydraulic cylinder pressing force: 180 kN - Bending capacity up to 80x15 mm upright - Round pipe up to 100x2 mm - Angle iron 70x70x8 mm - Weight: 800 kg NC control: 2-axis control Touch screen Storage for 1,000 programs with 19 steps each Interpolation

Būklė: naujas, Gamybos metai: 2024, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 80/3 H eco NC - Three driven rollers with smooth surfaces - Hydraulic adjustment of the upper roller - Working positions: horizontal and vertical - NC control for length and radius - Shafts mounted with tapered roller bearings - Use of interchangeable guide rails on the carriage - Roller diameter: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.5 kW - Hydraulic cylinder pressing force: 80 kN - Bending capacity up to 60x12 mm on edge - Round tube up to 80x2 mm - Angle iron 60x60x6 mm - Solid material: 35 mm - Weight: 550 kg - Year of manufacture: 2019 Lodpfxsg Ntmhs Am Hork

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 370 mm, CNC kampinė apskritoji pjovimo staklė - pilnai automatinė su mikroprocesorine valdymo sistema Detalės: - Dažnio reguliuojamas pjūklo pavaros greitis 13-73 aps./min. - Šiuolaikinis mikroprocesoriaus valdymas - Maks. pjūklo disko Ø iki 370 mm - Kampinis pjūvis: 60° kairėje ir 45° dešinėje - Didelis drožlių stalčius - Prispaudimo galvutė su dvigubu spaudimo svirčiu švariam pjūviui - Vertikalus prispaudimo cilindras - Automatinis aušinimas su elektriniu panardinamu siurbliu Techniniai duomenys: Pjovimo diapazonas prie 90°: Ø 120 mm arba 180 x 100 mm Pjūklo variklis 3,0 kW-400 V Darbinis aukštis 925 mm Svoris apie 750 kg Oro pajungimas 6 bar Išmatavimai (I x P x A) = 3.300 x 1.250 x 1.400 mm Darbinis aukštis 900 – 980 mm Ledpfx Ajw Uftqjm Hjrk

Būklė: labai geros būklės (naudotas), Gamybos metai: 1994, veikimo valandos: 1 930 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 7 200 mm, Y ašies eiga: 4 200 mm, Z ašies eigos atstumas: 1 750 mm, X ašies padavimo greitis: 15 000 m/min, Y ašies padavimo greitis: 15 000 m/min, padavimo greitis Z ašis: 15 000 m/min, bendras ilgis: 15 000 mm, stalo ilgis: 5 000 mm, bendras plotis: 15 000 mm, veleno greitis (min.): 10 aps./min, veleno greitis (maks.): 4 000 aps./min, bendras aukštis: 7 500 mm, stalo aukštis: 1 350 mm, atstumas tarp stulpų: 3 500 mm, įvesties srovės tipas: Oro kondicionierius, stalo apkrova: 65 000 kg, ruošinio svoris (maks.): 65 000 kg, atstumas nuo stalo centro iki veleno galo: 2 300 mm, bendras svoris: 210 000 kg, ašies variklio galia: 50 000 W, Aprašymas yra PDF priede. Ledpfxjvv N I Rj Am Hjrk

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1982, Grinding length: 500 mm Lredpfeu Ag Aijx Am Hek Grinding width: 350 mm Grinding height: 375 mm Grinding spindle drive: 3.7 kW Table speed: 2–28 m/min Automatic cross feed: 1–60 mm/stroke Automatic vertical feed: 0.002–0.06 mm/min Grinding wheel dimensions: 300 x 76.2 x 50 mm Machine weight approx. 2,800 kg