Paviršiaus šlifavimo staklės su sukamuoju stalu - Horiz.
ELB-Schliff SWR 60 T NC K

Name: ELB-Schliff SWR 60 T NC K
Brand: ELB-Schliff
Availability: InStock

Gamybos metai

1980

Sąlyga

Naudotas

Vieta

Metzingen

Paviršiaus šlifavimo staklės su sukamuoju stalu - Horiz. ELB-Schliff SWR 60 T NC K

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Paviršiaus šlifavimo staklės su sukamuoju stalu - Horiz.

Gamintojas:: ELB-Schliff

Modelis:: SWR 60 T NC K

Gamybos metai:: 1980

Sąlyga:: naudotas

Kaina ir vieta

Vieta:: Metzingen

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A16451026

Nuorodos Nr.:: 1049-5591873

Naujinta paskutinį kartą:: Data 2025.11.07

Aprašymas

Workpiece diameter 600 mm
Workpiece weight 400 kg
Workpiece height 300 mm
Total power requirement 35 kW
Machine weight approx. 4,500 kg

E L B
Horizontal Rotary Table Surface Grinding Machine
Model SWR 60 T NC-K
Year of manufacture 1980 Serial No. 169371080
_____

Grinding range: 600 mm

Table diameter / Magnetic chuck diameter: 600 mm
Table speed, steplessly variable: 20 - 80 rpm
Swing diameter approx.: 800 mm

Maximum grinding height above magnet: approx. 300 mm
Vertical travel of grinding head: 220 mm
Cross travel of grinding slide: 320 mm
Maximum table load: 400 kg

Automatic vertical feed: 0.01 - 0.2 mm/stroke

Grinding spindle speeds, steplessly variable: 1,000 - 2,400 rpm
Grinding wheel diameter max.: 400 x 120 x 76 mm
Grinding spindle drive, max.: approx. 28 kW

Total connected load: 35 kW - 380 V - 50 Hz
Weight: 4,500 kg

Accessories / Special Equipment

- Control panel mounted on the machine with adjustable stepless grinding spindle speed (potentiometer) with analog display of cutting speed in m/sec and ammeter
- Stepless table speed, stepless cross feed speed of the grinding slide, and stepless vertical infeed of the grinding wheel with roughing/finishing/spark-out, each adjustable via potentiometer, as well as with a dressing cycle timer for switching rapid vertical traverse to the grinding slide intermittently
- Hand control panel with push buttons for manual control of the machine, e.g. dresser forward/back, cross slide forward/back or crawl feed, vertical slide up/down or crawl feed
- 2 preset counters for setting preliminary and finish sizes with automatic shut-off
- Selector switch +1µ/-1µ, digital display of Y-axis
- Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and pre-settable dressing stroke
- Fitted normal-pole magnet approx. 600 mm Ø
- Separate free-standing electrical cabinet and separate small coolant pump

Condition: Satisfactory to good – ready for demonstration under power / Ideal for tool room jobs, etc.
Lodpet Abrwefx Af Iehb
Delivery: ex stock – as inspected
Payment: strictly net – upon receipt of invoice

Here is the link to the video:

Q U O T A T I O N

We are pleased to offer you ex our stock, subject to prior sale and error in technical data:

E L B (Germany)
Horizontal Rotary Table Surface Grinding Machine
Model SWR 60 T NC-K
Year 1980 Ser.-Nr. 169371080
_____

Grinding range, max.: 600 mm

Table Ø / magnetic chuck Ø: 600 mm
Workpiece swing diameter approx.: 800 mm
Table speeds, infinitely variable: 20 – 80 rpm

Max. grinding height above table approx. ...

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Paskutinį kartą prisijungęs: praėjusią savaitę

Registruota nuo: 2005

202 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 7123 ... skelbimai

Faksas:

Pridėti prie stebėjimo sąrašo

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Apdirbimo centras MATRA JOHNFORD DMC-2100H

Ennepetal

1 181 km

Apdirbimo centras
MATRA JOHNFORDDMC-2100H

Skambinti

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Lhjdporw Dknjfx Af Ijb Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each.

Peržiūrėti detales

Mažas skelbimas

Ellwangen (Jagst)

1 162 km

Apskritas stalas
RücklePKT 1000

6 900 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: geras (naudotas), NC Rotary Table with Motorized Drive Infinitely Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Total Height: 319 mm Lhodpfx Afofr Ih De Ijb T-Slots: 7 pcs T-Slot Size: 22 H7 mm T-Slot Spacing: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optionally available with machine bed About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is in the sector of machining and milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernizations

Peržiūrėti detales

Mažas skelbimas

Metalo lakštų tiesinimo / sulyginimo įrenginys TFON MACHINE CO. Leveling Machine - TF-S Series

Fevziçakmak

2 026 km

Metalo lakštų tiesinimo / sulyginimo įrenginys
TFON MACHINE CO.Leveling Machine - TF-S Series

Skambinti

Sąlyga: naujas, Gamybos metai: 2025, - TFON Leveltech® lyginimo mašinų serija Modeliai: S-3560, S-3511, S-3513, S-3516. - Sukurtos plonų medžiagų preciziškam lyginimui; mašinos turi pažangią elektromechaninę valdymo sistemą bei patogų lietimui jautrų ekraną efektyviam darbui. Medžiagos storis: 0,3 mm – 5,0 mm Maksimalus medžiagos plotis: - S-3560: 600 mm - S-3511: 1 100 mm - S-3513: 1 300 mm - S-3516: (plotis nenurodytas) Minimalus medžiagos ilgis: 70 mm Lyginimo tarpo reguliavimas: Elektromechaninis / PLC valdomas Apsauga nuo perkrovos: Standartinė Valdymo ekranas: lietimui jautrus Mašinos svoris: Ledpfx Ajhwb Utjf Iehb - S-3560: 5 000 kg - S-3511: 10 000 kg - S-3513: 14 000 kg Mašinos išmatavimai (I × P × A): - S-3560: 1 985 × 1 585 × 1 820 mm - S-3511: 2 485 × 1 585 × 1 820 mm - S-3513: 2 695 × 1 585 × 1 820 mm

Peržiūrėti detales

Mažas skelbimas

Iserlohn

1 160 km

CNC 4-oji ašis
NIKKENCNC -200

2 250 €

Pradinė kaina neįskaitant PVM

Skambinti

Mažas skelbimas

Juostiniai pjūklai - horizontali BERG & SCHMID X-tech 900

Vokietija

999 km

Juostiniai pjūklai - horizontali
BERG & SCHMIDX-tech 900

Skambinti

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. Lhjdpsfg E Hpefx Af Iob • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Peržiūrėti detales

Mažas skelbimas

Siūlų valcavimo mašina PEE-WEE UPW 24 CNC

Hilden

1 212 km

Siūlų valcavimo mašina
PEE-WEEUPW 24 CNC

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Voluminės spaudos slėgis tolygiai reguliuojamas nuo 240 kN Padavimas - tikslus reguliavimas 0,5-45 mm/min Sūkiai 0-80 aps/min Volų galvučių pasukimo kampas 11° Volų velenų skersmuo 69,85 mm Volinio veleno slankiklio eiga 0-150 mm Mažiausias atstumas tarp volinių velenų 138 mm Didžiausias atstumas tarp volinių velenų 285 mm Lhjdoxukrqepfx Af Ieb Mažiausias volų įrankių skersmuo 230 mm Didžiausias volų įrankių skersmuo 135 mm Mažiausias skersmuo 2 mm Didžiausias skersmuo 55 mm Sriegio ilgis įpjovimo metodu 200 mm Sriegio ilgis perėjimo metodu 2000 mm Didžiausias sriegio žingsnis 4 mm Bendras galios poreikis 14 kW Mašinos svoris apie 2,4 t Užimamas plotas apie 2,0 x 2,5 x 1,9 m Volinimo trukmė tolygiai reguliuojama nuo: 0,1 s Pauzės trukmė tolygiai reguliuojama nuo: 0,1 s Volinio veleno laikymo ilgis: 200 mm Staklių lovos aukštis: 810 mm Volinio veleno aukštis virš staklių lovos: 200 mm Atraminių guolių aukštis: 115 mm Didžiausias žingsnis profiliui: 2,5 mm (-iki 70 kg/mm2 medžiagos stiprio)

Peržiūrėti detales

Mažas skelbimas

Pavarų matavimo mašina KLINGELNBERG-OERLIKON CS 200

Kanada

7 365 km

Pavarų matavimo mašina
KLINGELNBERG-OERLIKONCS 200

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2004, Clamping knife head type (max.): 460 mm Knife head weight (max.): 150 kg Mounting plate diameter for knife heads (Ø): 360 mm Mounting taper for knife heads, nominal diameter Ø: 58.227 mm Travel distance - Z axis: 200 mm Chart recording magnification: ±10 - ±500 µm Machine weight approx.: 2.3 t Lhedpfx Afjul Efms Ijb Space requirement approx.: 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear cutting tools used is critical. Especially in dry cutting, achieving high gear quality and long tool life is only possible with precisely adjusted cutter heads. The Oerlikon Cutter Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual cutters, checks their position, and documents the measurement results. The measuring process on the CNC-controlled testing device is semi-automated: Each step in the procedure is displayed on the screen via operator guidance. The positioning of individual cutters in the cutter head and the height of the cutter tips are managed by a special process that is largely automatic and simultaneously documented in a runout diagram. A subsequent measuring run checks the radial position of the inner and outer cutting edges of all the knives in the cutter head. If individual test parameters on the knives do not meet the specified tolerances, they can be individually readjusted. Combining a semi-automated setting sequence, operator-guided setup actions, and automated measurement procedures, cutter heads can be adjusted conveniently, quickly, and with high precision. Operator-guided setting and testing sequence: - Graphical display of the cutter head configuration and measurement results with tolerance monitoring - Step-by-step operator instructions in plain text (without coded information) - Simple assignment of measurement results to individual cutters - Documentation of adjustment and measurement results via printer - Setting and testing sequence suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Peržiūrėti detales

Mažas skelbimas

Portalo frezavimo staklės F. Zimmermann FZ 35

Baienfurt

1 276 km

Portalo frezavimo staklės
F. ZimmermannFZ 35

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Initial commissioning: 2000 Lodjw Rl S Sspfx Af Ishb Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle completely overhauled at the end of 2024 !!! Drives for linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Color Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - Three-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. Machine still connected to power and immediately available.

Peržiūrėti detales

Mažas skelbimas

Dieburg

1 171 km

Automatinė baro mašina
TRAUBA 25

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2013, BAR FEEDER TRAUB A 25 2013 Turning length: 65 mm Lhjdpjwc Amxjfx Af Ijb Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Max. part length: 65 mm Motor speeds: 1400–2800 rpm Bar loader included!

Peržiūrėti detales

Mažas skelbimas

Stendo tipo frezavimo staklės huron RU991

Courbevoie

1 627 km

Stendo tipo frezavimo staklės
huronRU991

Skambinti

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1978, X ašies eiga: 4 500 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, veleno greitis (maks.): 2 066 aps./min, stalo plotis: 1 000 mm, stalo ilgis: 6 100 mm, bendras svoris: 19 000 kg, 3-axis Newall visual display, feed speed variator Ljdpovz Aydefx Af Ishb SA 50 spindle head, continuously variable spindle speeds up to 1500 rpm Table: 6100 x 1000 mm Travel: 4500 x 1000 x 1000 mm Weight: 19 tonnes

Peržiūrėti detales

Reklamuokite čia