Daugiaašmenis Mem 1Mrf Su Centravimo Įtaisu pirkti naudotą (7 924)

Būklė: naujas, Gamybos metai: 2025, Dimensions (length/width/height): 2200x1500x1580 mm Weight: 2300 kg Total power requirement: 40 kW Multiblade Saw MULTIMAX 300 - Chain width: 300 mm - Cutting height: 10 - 120 mm - Max. saw blade diameter: 380 mm - Min. saw blade diameter: 200 mm - Saw blade bore diameter: 70 mm Isdpfx Aevz Hwyelroic - Saw shaft diameter: 55 mm - Min. workpiece length: 600 mm (single) / 300 mm (series) - Working height: 740 mm - Table size: 1530 x 760 mm - Speed: 4000 rpm - Feed rate: 7.5 - 30 m/min - Saw shaft motor: 37 kW - Feed motor: 2.2 kW - Total connection: 40 kW - Digital display for feed speed - Saw sleeve with one set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction connection: 2 x 150 mm - Dimensions: 2200 x 1500 x 1580 mm - Weight: 2300 kg - CE certified

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1930 x 1580 x 1580 mm Weight: 2250 kg Total power requirement: 32.57 kW Multiblade Saw MULTIMAX 300 Short Ijdjvz Hw Tepfx Alroic - Chain width: 300 mm - Cutting height: 10 – 85 mm - Max. saw blade Ø: 380 mm - Min. saw blade Ø: 200 mm - Saw blade bore Ø: 70 mm - Saw spindle Ø: 55 mm - Min. workpiece length: 530 mm (single) / 200 mm (series) - Working height: 740 mm - Table dimensions: 1530 x 760 mm - Spindle speed: 4000 rpm - Feed speed: 4 – 30 m/min - Saw spindle motor: 30 kW - Feed motor: 2.2 kW - Total connected load: 32.57 kW - Digital display for feed speed - Saw sleeve with one set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta switch - Extraction ports: 2 x 150 mm - Dimensions: 1930 x 1580 x 1580 mm - Weight: 2250 kg - CE compliant

Būklė: naujas, Gamybos metai: 2026, Cutting width: 450 mm Weight: 5,500 kg Working height: 850 mm WINTER Multiple Rip Saw MULTIMAX 175 M4 + VISUAL OPTIMIZATION SYSTEM VISUAL OPTIMIZATION SYSTEM: The operator places the raw boards onto the chain conveyor. Cross transport is initiated by pressing a manual button. While transporting under the visual measurement system, the board is measured from above. The determined usable board width forms the basis for 2D optimization. The line can be operated in two modes: 1. Automatic mode without quality consideration The detected usable board area is optimized according to the pre-programmed width/length combinations. 2. Semi-automatic mode with quality offset The usable board area can be corrected by defining different quality zones over the board width. Quality marking is done via the touchscreen. Optimized boards are handed over to the infeed and positioning system, which fixes the board with two positioning hooks. Conveyor belts and upper pressure rollers feed the board precisely into the MULTIMAX 175 M4. Function: Board measurement is performed during cross transport. For correct measurement, the narrow side of the board must face upwards. Automatic measuring provides information on: - Total board width - Position and width of the board edge - Effective usable width - Board length (within allowed grid) By entering an offset, parts of the board edge can be allowed for certain products. 2D Optimization Program: Width: Optimization purely by width according to the cutting list for maximum material yield. Price: Additionally, prices can be stored in the cutting list, and the system optimizes for maximum value. Quantity: Required piece counts are considered, the machine processes orders quickly. Isdpfx Aloyk Icgsrsic Based on the stored lengths and widths, the vision system performs complete 2D optimization. All entered data is stored and analyzed, so all cuttings can be checked at any time. The quality function module allows the operator to override the measured board width and define quality zones. The updated optimization is displayed on the touchscreen. Up to four quality levels are possible. However, the quality offset function reduces maximum line performance. Technical Parameters: Feed speed: 50 m/min Max. infeed width: 800 mm Infeed length: 800–4,000 mm Feed platform motor power: 0.75 kW Working height: 870 mm Number of cross chains: 6 Chain length: 2,850 mm Conveyor weight: 1.2 t Weight of visual scan system: 1.8 t Servo power of positioning hooks: 2 × 800 W Horizontal feed speed: 20 m/min Horizontal feed motor power: 0.75 kW Longitudinal feed speed: 10–60 m/min Motor power longitudinal feed: 1.5 kW Infeed system weight: 1.4 t MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: - Industrial computer with touchscreen - Input of saw lists, display of optimization results, machine status, error messages - Multi-function handheld device for quality marking and width measurement - Laser for width measurement Each handheld control unit operates a freely positionable saw spindle Software opti...

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 3076x1250x1600 mm Svoris 2000 kg Bendras galios poreikis 25,32 kW Daugialapė pjūklas MBS-250 ECO - didžiausias darbinis plotis 250 mm - didžiausias darbinis aukštis 80 mm Iodpfx Aoyk Ic Tjlroic - padavimo greitis 5–18 m/min - pjūklo veleno Ø 50 mm - pjūklo disko pleišto griovelis 16 x 5 mm - pjūklo veleno apsisukimai 4000 aps./min - didžiausias pjūklo disko Ø 300 mm - pjūklo veleno variklis 22,0 kW - aukščio reguliavimo variklis 0,37 kW - padavimo variklis 0,75 kW - bendra galia 25,32 kW - matmenys L=3076, P=1250, A=1600 mm - svoris 2000 kg Įskaičiuota: - kietai chromuoti stalai

Būklė: naujas, Gamybos metai: 2026, Cutting width 450 mm Iedpfx Aloyk H Unorsic Operating voltage 400 V Weight 5500 kg WINTER multiple-blade saw with 4 electrically adjustable saws MULTIMAX 175 M4 MULTIMAX 175 M4: Function: Optimization software for controlling the movable saw units includes: - Industrial computer with touchscreen - Entry of cutting lists, display of optimization results, machine status, error messages - Multifunction handheld device for quality marking and width measurement - Laser for width measurement - Each handheld unit controls a freely positionable saw shaft - Software optimizes for yield, value, and productivity - All production data is stored, monitored, and analyzed Additional features: - Independent control panel (cable length 6 m) - Spray mist lubrication system for the saw shafts - FIX laser (manually adjustable) for displaying saw blade position - Movable laser per saw shaft (synchronized to blade position) - Lasers can already display the next cutting solution while the previous board is still being cut - Infeed system - Automatic “Easy Feed” infeed with powered pressure rollers - Infinitely variable feed speed - Heavy-duty transport chain with hardened guide pins - Hardened prism rails for precise guidance Technical Parameters MULTIMAX 175 M4: - Max. cutting width: 450 mm - Min. cutting width: 45 mm - Max. cutting height without pressure plate: 80 mm - Max. cutting height with pressure plate: 60 mm - Max. feed width: 800 mm - Min. cutting length with pressure plate: 600 mm - Total motor power: 37 kW - Operating voltage: 400 V / 50 Hz - Saw shaft diameter: 65 mm - Shaft speed: 4200 rpm - Saw blade Ø min./max.: 250 / 305 mm - Saw blade bore: 80 mm - 6 carbide-tipped saw blades Ø300 × 3.1 / 2.2 × Z28 - Positioning speed: max. 150 mm/s - Positioning tolerance: ±0.1 mm - Feed speed: 6-60 m/min - Feed motor: 4.0 kW - Chain width: 500 mm - Pressure roller diameter: 110 mm - Max. total outfeed width: 800 mm - Temperature range: 0-40 °C - Extraction hood Ø250 mm - Air speed: 30 m/s - Air volume: 5300 m³/h - Working height: 850 mm - Machine dimensions: 2732 × 2256 × 2003 mm - Net weight: 5500 kg - Color: light grey RAL7035 / anthracite RAL7016 - Cursor travel range: 5 m Configuration: - Transport chain with spikes (every second chain link) - Penetration depth: 0.8 mm (standard) Advantages: - Parallel feed - Stable hold for warped/wide/short boards - Ideal for glue joint cutting - Chain brush at infeed for continuous cleaning - Precision cutting through prism-guided transport chain - Automatic chain lubrication (adjustable via MFD/touchscreen) - Wear-resistant chain return underneath the saw blades Additional equipment: - Powered outfeed roller below (corrugated) + upper pressure roller - Pneumatic control for safe removal of offcuts - High-performance pressure system with 6 spring-mounted rollers - Traveling pressure plate synchronized with saw blade motion - Reliable hold-down over the entire cutting length - Motorized height adjustment of the pressure system with display - Pneumatic suspension of all pressure cylinders - Separate pressure regulation for each element Occupational and operational safety: - 1 set of operating and instruction manuals - CE safety standards - Multiple anti-kickback devices - Swiveling safety hood with lock and standstill monitoring - Emergency stop at infeed, outfeed and control panel - Safety hood with viewing window

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2200 x 1800 x 1250 mm Weight: 1700 kg Total power requirement: 23.5 kW Multiblade saw MBS-1300 Iodjvz Hrkepfx Alreic - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 30 mm - Minimum workpiece length: 550 mm - Spindle diameter: 74 mm - Saw shaft speed: 2,600 rpm - Saw blade diameter: 205 mm - Up to 30 saw blades on the saw shaft - Main motor power: 22.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 1.5 kW - Total connected load: 23.5 kW - Feed speed: 0–12 m/min - Feed rollers: 6 pairs (12 pieces) - Extraction port: 150 mm - Dimensions: L=2200, W=1800, H=1250 mm - Weight: 1700 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2100 x 1900 x 1980 mm Weight: 3500 kg Total power requirement: 77.2 kW Multi-blade Saw MULTIMAX 170 - Chain width: 350 mm - Cutting height: 10 - 170 mm - Max. saw blade diameter: 505 mm - Min. saw blade diameter: 355 mm - Saw blade bore: 80 mm - Min. workpiece length: 740 mm - Working height: 745 mm - Speed: 2600 rpm - Feed speed: 2.5 - 24 m/min - Saw shaft motor: 75 kW - Feed motor: 2.2 kW - Total connected load: 77.2 kW - Digital display for feed speed - Saw box with one set of flange rings - Anti-kickback protection Iodpfsvz Hwmjx Alrsic - Automatic lubrication system - Automatic star-delta switch - Infeed roller conveyor length: 1500 mm - Outfeed roller conveyor length: 1500 mm - Extraction nozzle: 2 x Ø 150 mm - Transport dimensions L=2100, W=1900, H=1980 mm - Dimensions with infeed and outfeed roller conveyors: L=4460, W=1780, H=1880 mm - Weight: 3500 kg - CE compliant

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 2300 x 1800 x 1400 mm Weight: 2500 kg Total power requirement: 37 kW Multi-blade saw MBS-1300-60 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 60 mm Iedpfx Aljvz Hrwsrsic - Min. workpiece length: 600 mm - Spindle diameter: 90 mm - Saw shaft speed: 2600 rpm - Saw blade diameter: 270 mm - Max. 30 saw blades on the saw shaft - Motor power: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 8 pairs (16 pieces) - Extraction port: 150 mm - Dimensions (L=2300, W=1800, H=1400 mm) - Weight: 2500 kg

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2500 x 2170 x 2080 mm Weight: 4250 kg Total Power Requirement: 81 kW Multi-Blade Saw MULTIMAX 170-500 XL - Max. working width: 500 mm - Chain width: 500 mm - Max. cutting height: 170 mm - Min. cutting height: 10 mm - Min. workpiece length: 740 mm - Max. saw blade diameter: 505 mm - Min. saw blade diameter: 405 mm - Saw blade bore diameter: 80 mm - Spindle diameter: 60 mm without bushing - Speed: 2600 rpm - Feed rate: 2.5 – 24 m/min - Saw spindle motor: 75 kW - Feed motor: 5.5 kW - Height adjustment motor: 0.75 kW - Total installed power: 81 kW - Voltage: 400 V / 50 Hz - Digital display for feed speed - Swiveling operator's panel at eye level Isdpfjvz Hwtox Alrsic - Electrically driven infeed roller in the table with pneumatically controlled top pressure roller - Optical wood detection via photoelectric sensor - Electrically driven outfeed roller at the discharge end - Heavy-duty roller conveyor at infeed and outfeed - Transport chain with hard-chrome-plated surface - Saw bushing with a set of flange rings - Anti-kickback device - Automatic lubrication system - Automatic star-delta starter - Extraction connection: 2 x 150 mm - Working height: 820 mm - Overall dimensions: L=4850 mm, W=2020 mm, H=1880 mm - Transport dimensions: L=2500 mm, W=2170 mm, H=2080 mm - Weight: 4250 kg

Būklė: naudotas, Bar loading magazine BREUNING IRCO SIMAG 42.1 R-3000 Iiodpfx Alewdamforsc

Būklė: beveik kaip naujas (naudotas), grandis plotis: 210 mm, Transportavimo grandinė, plotis 210 mm, 59 nareliai, Interholz RAIMANN, Freiburgas, Weinig Iijdpfx Ajqwdvgslroc

Būklė: geras (naudotas), Gamybos metai: 1994, mašinos/transporto priemonės numeris: 4422550994025, Pasiūlymas 26088 Hidraulinės profilių ir strypų žirklės su išpjovimo įtaisu ir skylamušiu Techniniai duomenys: Iijdpfsy Nk Rlsx Alrec - Plokščių žirklės - Plokščias plienas – 400 x 16 mm - arba: 300 x 18 mm - Profilinio plieno žirklės - L ir T formos plienas, 90° – 130 x 12 mm - Kvadratinis/apskritas plienas – 40 / 40 mm - Iškirpiklis - Su kvadratiniu iškirpikliu lakštiniam plienui iki apie 13 mm - Iškirpimo gylis apie 70 mm - Iškirpimo plotis apie 52 mm - Skylamušis - Pramušimo jėga apie 60 t - Atstumas nuo rėmo – 400 mm - Eiga apie 10–50 mm - Pramuša plieną iki Ø31 mm storio 15 mm - Elektros kontaktinis ribotuvas - Įvairūs skylamušiai ir matricai - Pavara 400 V / 5,5 kW - Reikalinga vieta (PxAxG): 1100 x 2000 x 1700 mm - Svoris apie 2100 kg

Būklė: geras (naudotas), 344 NAUDOTA Duonos apvalinimo-ištempimo mašina, juostinė apvalinimo mašina duonai, duonos ištempimo mašina. IŠORINIAI MATMENYS (cm): - aukštis: 195 Iisdpfx Aeyuvicslroc - plotis: 95 - ilgis: 350 JUOSTOS NR. 1 MATMENYS: - plotis: 20 - ilgis: 274 JUOSTOS NR. 2 MATMENYS: - plotis: 28 - ilgis: 165 JUOSTOS NR. 3 MATMENYS: - plotis: 57,5 - ilgis: 174 Įrenginį galima apžiūrėti mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos papildomos mokamos paslaugos: transportavimas. Nurodyta kaina yra be PVM. KALBAME ANGLIŠKAI, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS.

Būklė: naudotas, Strypų padavimo magazinas FMB TURBO 5-55/3200 "A" Iijdpfx Aley Umvbjrsc

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, 430 mm track width 120 mm cutting height 55 kW saw motor stepless feed speed machine workshop-inspected machine cleaned and newly painted Isdpfet Aad Sox Alroic

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, track width 300 mm cutting height 120 mm max. blade diameter 350 mm motor power 30 kW table width 750 mm Iiedpewxrrvofx Alroc feed rate controlled by frequency inverter fence adjustable pneumatically

Būklė: naudotas, Matmenys: ilgis 6990 mm, plotis 2500 mm, aukštis 2720 mm. Svoris 4191 kg. Pakreipimo įtaisas 140–660 l talpos konteineriams. Iodpfx Ajvkn Nvjlrjic

Būklė: geras (naudotas), Rotary turning device BILZ size 3 Isdpfx Aljv Sag Nereic Turning diameter 150 - 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: geras (naudotas), Gamybos metai: 1994, The machine was newly re-bedded and equipped with new brushes one year ago. The wash brushes are in very good condition! - 8 brushes - Without infeed and outfeed section - Includes control cabinet and drying blower - Working direction: from right to left - Washing height: 2.3 m - Glass thickness: 4–15 mm - Width: 2900 mm Iedjqc Udijpfx Alreic - Depth: 1100 mm - Height: 3400 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Load capacity 15/30 t Workpiece diameter 600 mm Isdpfx Aljwc D Auoreic Wheel diameter 520 mm Total power requirement 2 x 1.1 kW Machine weight approx. 2300 kg

Būklė: beveik kaip naujas (naudotas), Nenaudota stacionari luneta su ritinėliais ir atsargine pinole iš HEYLIGENSTAEDT CNC įstrižinės lovos tekinimo staklių Centro aukštis: 500 mm Vidinis skersmuo: 600 mm Pagrindo plokštė: 320 x 540 mm Svoris: apie 200 kg Iedpfx Alsw Sgw Ejrsic Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodu šį tekinimo staklę, prijungta, galima išbandyti. Pridedami priedai prie staklės. Galima atsiųsti staklės vaizdo įrašą per WhatsApp programėlę. Skersmuo virš lovio ..... 1050 mm Atstumas tarp centrų ..... 6000 mm Skersmuo virš skersinio vežimo ..... 840 mm Iiodpfx Alov Nw A Nerjc

Būklė: geras (naudotas), Horizontal milling attachment – Counterholder for KUNZMANN milling machines, WF series. This was an accessory for a KUNZMANN WF 4/3 TNC 124. There are 2 units available. The current list price at Kunzmann is over €2,000 plus VAT. Iijdpsvr Stusfx Alrsc With an appropriate adapter plate, it should also fit other machines (e.g. EMCO, MIKRON, DECKEL, FPS, etc.). Net price ex stock.

Būklė: geras (naudotas), Device for filling spacer frames, Included in the scope of delivery: 1 piece molecular sieve drum (empty), Operating pressure: 1–3 bar, Depth: 250 mm, Width: 2350 mm, Height: 1800 mm. Isdpfer Hpknjx Alreic

Būklė: naudotas, Vertical bandsaw, make PEHEKA, model SU 6.33 Throat depth: 615 mm Isdpedawl Hsfx Alrjic Maximum cutting height: 250 mm Cutting speed: min. 12 meters per minute, max. 3000 meters per minute, infinitely variable With saw blade welder, make IDEAL Saw blade length: 4700 - 4800 mm Saw blade width: 8 - 25 mm 380 Volt Required space: L 1400 x W 1100 x H 2280 mm