Daugiaašmenis pjūklas

WINTER MBS-1300

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 2300 x 1800 x 1400 mm Weight: 2300 kg Total power requirement: 37 kW Multiblade Saw MBS-1300-45 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 45 mm - Min. workpiece length: 600 mm Pedpfx Ahsvz Hrqovsgr - Spindle diameter: 85 mm - Saw spindle speed: 2,600 rpm - Saw blade diameter: 255 mm - Max. 30 saw blades on spindle - Motor power: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 7 pairs (14 pcs) - Extraction port: 150 mm - Dimensions (L = 2300, W = 1800, H = 1400 mm) - Weight: 2300 kg

Būklė: naudotas, Gamybos metai: 2017, Overview The wrapper was manufactured in 2017 by the Spanish company Movitec. It will remain in operation until the end of September 2023 and can be inspected at any time. Technical Data - Max. 120 pallets/hour (with 10 wraps) Pgodpfxjl Uyfko Ahvjr - Dimensions (LxWxH): 5,240 mm x 3,825 mm x 4,184 mm - Weight: 2,000 kg - Film width: 500 mm - Main frame constructed from steel - Rotary ring with unwind unit for pre-stretch film - Motorized pre-stretching system - Cutting and sealing system Scope of Delivery - Safety fence - Wrapper | Movitec | Saturn S6 | 2017 - Compressor | Josval | EDS-900 | 2016

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 2300 x 1800 x 1400 mm Weight: 2500 kg Total power requirement: 37 kW Multi-blade saw MBS-1300-60 - Working width min./max.: 200 / 1220 mm - Cutting height min./max.: 5 / 60 mm - Min. workpiece length: 600 mm - Spindle diameter: 90 mm - Saw shaft speed: 2600 rpm - Saw blade diameter: 270 mm - Max. 30 saw blades on the saw shaft - Motor power: 37.0 kW - Voltage: 400 V / 50 Hz - Feed motor: 2.2 kW - Total connected load: 39.2 kW - Feed speed: 0–12 m/min - Feed rollers: 8 pairs (16 pieces) - Extraction port: 150 mm Pgedpfovz Hrwsx Ahvor - Dimensions (L=2300, W=1800, H=1400 mm) - Weight: 2500 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 680 kW (924,54 AG), Įranga: aušinimo blokas, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9+25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Output depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow: 162,500 / 131,000 m³/h Motor power input: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise level: 52 dB Length: mm Height: mm Width: mm Weight: approx. kg Psdpfx Ahovllxdjvjgr The cooler has been technically inspected and is fully operational.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil collection mats. Does not include a packaging table—only briquette guides (rails) are provided. Comes standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. Please contact us first regarding this press! Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 liters Filters: 4 Length: 2000 mm Width: 2000 mm Podpetmugcjfx Ahvjgr Height: 2200 mm Weight: 3500 kg Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours

Būklė: naujas, Tipas: 1300-2S Darbinis plotis: 1300 mm Pgjdpfom Dr Rgsx Ahver Minimalus ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Šlifavimo veleno greitis – su dažnio valdymu Padavimo greitis: 5–20 m/min Bendra variklių galia: 6,27 kW Transporto matmenys: 1700 x 2100 x 1400 mm Svoris: 1200 kg Kaina: 6100 Eur (EXW Jonava, Lietuva)

Būklė: labai geros būklės (naudotas), Portal machine Movable panel, movable working head (horizontal workpiece) Pgedpfxjgwbbqj Ahvor Numerical control Power Control, WoodWOP software Working head safety cabin. Complete machine safety enclosure Infeed support table (workpiece support). Outfeed table (with conveyor belts) Workpiece feed with no. 3 conveyor belts (feed speed (m/min) max approx. 130) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Total installed power (kW) 99 No. 2 WORKING UNITS (TOP): (SERVO-MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles 40) No. 3 WORKING UNITS (BOTTOM): (SERVO-MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + no. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue application and dowel insertion (right side) No. 8 injection nozzles for glue application and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, Įranga: kabina, Paint/Spray Booth !! Always a brand-new machine (Photos from customer installations). We are the manufacturer. !! The Reinox 450×235 paint booth is the ideal solution for painting large components and series production. Thanks to its robust design, powerful extraction system, and ATEX certification, it provides safe operation even in explosion-hazardous environments. The booth is equipped with a high-performance fan featuring a frequency inverter, enabling stepless suction adjustment to meet current needs. The three-stage filtration system keeps the workspace clean and ensures high-quality surface finishing. Technical specifications: - Fan certified for ATEX Zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan output: 4 kW (ATEX version) - Suction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Control: Frequency inverter – stepless power adjustment via potentiometer on control panel - Filtration: Three-stage (dry or wet option available as required) - Certifications: CE, ATEX Warranty: 12 months Pgjdpfx Asia Taxohvjr Machines can be ordered in a variety of customized configurations and dimensions! Please feel free to contact us.

Gamybos metai: 2002, būklė: nepatikrintas (naudotas), Robot No control panel + connecting cables Used, untested robot. No teach pendant. Not tested. Pedogu U Itopfx Ahvsgr

Būklė: naujas, Gamybos metai: 2026, CNC gręžimo ir kaiščių įkalimo automatas, skirtas pilnai automatiniam gręžimui, klijavimui ir kaiščių įkėlimui. Gręžimo ir kaiščių apdirbimo centras pasižymi kompaktiškumu, efektyvumu, kokybe ir lankstumu. Trumpas pristatymas: • Universalus CNC valdomas gręžimo ir kaiščių įkalimo įrenginys • Klijų įpurškimo kontrolė per GIC Psdsdx Axfepfx Ahvsgr • Uždara klijų sistema • Tinka plokščių ir masyvo apdirbimui • Papildomos horizontalios ir vertikalios gręžimo galvutės – pasirinktinai • Palengvina CNC apdirbimo centrus • Optimali papildoma įranga nestingo staklėms