Automatinė Dažymo Linija pirkti naudotą (9 187)

Gamybos metai: 2013, būklė: naudotas, Technical data for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of bales opened: 674 units Operating time: only 3 days, exclusively during commissioning of the entire plant upon initial installation Opening time: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400–1900 mm Max. bale weight: 2,000 kg Conveying height (system): 1,400 mm Max. conveyor width (system): 1,200 mm Materials to be opened: RDF/MSW System availability: 98% Noise level of bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Pgsdpfx Aju Tg I Dspysk Scope of supply: - Feeding conveyor: 3,500 x 1,200 x 1,400 mm - Infeed conveyor to opener: 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heating - Oil cooler for hydraulic unit Explanation regarding the short operating period: The complete Cross Wrap bale opener line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The background for installation was that, in the event of operational disruptions or maintenance of the incineration plant, municipal waste could continue to be accepted, compacted, wrapped, and stored until the disruption was resolved. Then, all the bales would be reopened and the waste would be fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and never used in regular operation afterwards. Only during commissioning and initial testing were 674 bales opened over three days in 2015. The system is in excellent, immediately operational condition. Due to modifications at the incineration plant, the installation area for the bale opener was needed, so the entire line is now available for sale. Brief description of the bale opening process: Pressed bales are placed on the infeed conveyor from the side or rear using a forklift. For opening, the bales must be oriented so that the wire or twine binding runs horizontally to the conveyor; otherwise, the bales must be rotated 90° beforehand. The opening conveyor moves one bale at a time in front of the cutting unit. The grippers secure the wires or twine. The rotating knife cuts the bale lengthwise. Afterwards, the gripper returns to the home position. The opened bale is then conveyed to the discharge chute and falls onto the subsequent conveying system. Remarks: Original price of the entire plant: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. The system has been dismantled into transportable units, stored, and is available at short notice for inspection and loading. No liability is assumed for the technical specifications or possible errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 600 mm, Žalos išpjaustymo funkcija Pgjdpfx Aex Nnd Aopyek Energijos tiekimas: 400 V Disko skersmuo: Ø 600 mm Mašinos masė: 1820 kg Pagaminimo metai: 2006 Tipas: CT 600 Variklio galia: 7,5 kW Serijos numeris: 260856 Padavimo stūmiklio matmenys (infeed): 10 300 × 2 000 × 1 250 mm Išvedimo transporterio matmenys (outfeed): 6 300 × 800 × 1 120 mm Išvedimo stalo matmenys: 5 000 × 1 250 × 910 mm Sukimosi greitis: apie 2600 aps./min. Stalo pasukimo diapazonas: maks. ±70° Pjovimo aukštis: apie 200 mm (prie 0°) Maks. pjovimo plotis: apie 410 mm Minimali ruošinio dimensija: 20 × 10 mm Pozicionavimo tikslumas: ±0,4 mm Ciklo laikas: apie 4 sekundes vienam pjūviui Darbinis aukštis: 1000 mm Dulkių nusiurbimo prijungimas: Ø 100 mm Beckhoff valdymas su 12 colių jutikliniu ekranu (Windows sąsaja), 3D detalių vizualizacija, pjovimo sąrašų importas per USB / Ethernet

Būklė: naudotas, mašinos/transporto priemonės numeris: 005989, Maks. apdorojamas ilgis: 1500 mm Sukamoji platforma: Ne Pjdowucl Sopfx Apyjgk

Būklė: geras (naudotas), Gamybos metai: 1992, fully automatic programmable cross-cutting with additional marking detection for defect removal via LUT system infeed conveyor 6 m Pgodpfx Asl H E Tajpyek 6 ejection stations, total length 12 m The infeed belt is currently not running, most likely due to a frequency converter issue

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2023, For sale: a complete and fully operational steel sheet roll forming line for processing coils (e.g., Magnelis) into various profiles such as C-type, commonly used in photovoltaic installations and solar farms, steel hall and shelter construction, as well as furniture manufacturing, etc. The line, including the decoiler, is installed in a heated hall under near-laboratory conditions. Buyers can test run the machine before purchase. I have contacts for companies supplying custom roll forming toolsets for specific profiles, as well as for companies specializing in upgrading and expanding such machines. Psdju A U Utspfx Apyogk Further information is available exclusively by phone; I do not respond to written messages. A VAT invoice will be issued for the production line. --- Located in Poland, near the border with Ukraine (Krosno city).

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, CNC Sliding Headstock Automatic Lathe | Manufacturer: MAIER | Model: ML 32E | Year of Manufacture: 2016 Pgjdpfx Apoyw Trneyjk The machine can be inspected under power by appointment. Condition: Very well maintained, fully functional / operational. Operating hours: approx. 33,720 h TECHNICAL DATA: - Axes: 11 - Turning diameter over bed: 32 mm - Spindle bore: 34 mm - Channel 1/Z1 > Spindle stroke: 220 mm - Main spindle speed: 6,000 rpm - Channel 2/Z2 > Turning length (sub-spindle): max. 340 mm - Channel 3/Z3 > Turret: 160 mm - Collets: 1536E - Drive motor power: 5.5/3.5 kW - Total power requirement: 28.7 kW, 60 A - Machine weight: approx. 4.4 t - Space requirement: approx. 8.0 x 2.7 x 2.3 m EQUIPMENT: - Control: FANUC T31i - 1 pc. sub-spindle - NC C-axis on main and sub-spindles - Tool holders for 6 fixed turning tool holders, cross-section 12 x 12 mm - Bar feeder, Manufacturer: FMB Turbo Ø 3-36, Year of Manufacture: 2016 Guide channels DM12 + DM25 - Chip conveyor - Electronic handwheel - High-pressure unit, Manufacturer: KNOLL (Pump 1: 1-120 bar, Pump 2 up to 50 bar) with paper band filtration system - Fire protection system by KRAFT & BAUER - WPM4 - Tool and process monitoring "Genior Modular - Fully automatic tool and process monitoring" - Extraction unit - CE marking - Documentation Additional accessories available for purchase. No guarantee for completeness and accuracy of technical data and equipment. - Subject to prior sale -

Būklė: naudotas, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger joint length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m, stepless. Consisting of the following components: - SMB vacuum destacking unit, longitudinal, with 2 lifting tables and 2 package roller conveyors, year 2013. Maximum package dimensions: 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system. Singulation and feeding into roller conveyor for scanner loading, board turner, diverter for too moist, too dry, diverter for B-grade, marking station and/or automatic mode - Bidac end-grain scanner for cup detection, year 2013 - Brookhuis FMI 5 moisture measurement, year 2019 - Microtec scanner Goldeneye 502, year 2012 with X-ray, 4 colour cameras, and new optimization software Psdpfsvvi Tyjx Apyjgk - Dimter Opticut 350-2, year 2003 with paddle ejector (year 2009) and corresponding sorting belts and pneumatic ejector for 2 additional grades - NKT packaging system - NKT finger jointing system with rotary table Spezialpack AH 1050, year 2005, consisting of: milling unit, tilting station, threading section length 5.0 m, cycle press length 6.00 m, cross-cut saw - SMB stacking machine, year 1998, length 2.50 – 13.50 m, can be split into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually and steplessly adjustable stop, electric/hydraulic, max. package width: 1200 mm, max. package height: 600 mm, hydraulic package pusher Storage location: Customer site

Būklė: geras (naudotas), Gamybos metai: 2015, Pellet production line with components from Mechanika Nawrocki and Cedrus. The line is equipped with two Mechanika Nawrocki GRB2 750 pellet mills, each with 100 kW motors. Includes two hammer mills, each 250 kW. Features filter cyclones for dedusting, pneumatic and mechanical conveying systems, and dosing bins. Year of manufacture: 2015/16. Individual machines can be purchased separately. Psdpfjwcdlpsx Apyogk

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, kampinė presė Pgodsyxy Tnspfx Apyjk

Būklė: naudotas, Pjovimo staklės, automatinė pjovimo staklė, automatinis pjovimo įrenginys, Adige CM501 – naudotos staklės Gamintojas: Adige Modelis: CM 501 Metai: 1996 Pjūklo disko skersmuo: 250–360 mm Pgedsy Ayc Djpfx Apyek Pjovimo ilgis: 2100 mm Didžiausias ruošinio skersmuo (apvalus): 85 mm Didžiausias ruošinio dydis (kvadratas): 70 × 70 mm Automatinės apskritiminės pjovimo staklės ADIGE CM501, pagamintos 1996 m. Italijoje, skirtos visiškai automatiniam pilnavidurių, vamzdžių ir profilių iš plieno, žalvario, aliuminio ir kitų lengvųjų lydinių pjovimui pramoninėje gamyboje.

Būklė: naudotas, Gamybos metai: 2008, Medžiagos padavimas bet kokio ilgio (maks. eiga 610 mm) Pjovimo skersmuo: apvalus 510 mm, plokščias 500 x 500 mm Pjovimo greitis reguliuojamas valdikliu: 25–235 m/min Pgsdpfx Apovxqtaoyok Drožlių transporteris Yra naudojimo instrukcijos, elektros schemos ir atsarginių dalių sąrašai Tik apie 5 000 pjovimo valandų Daugiau techninių duomenų nuotraukoje arba pagal užklausą Staklių svoris: apie 3 t Labai gera būklė

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: ribota funkcionalumas, pjovimo aukštis (maks.): 230 mm, pjovimo plotis (maks.): 245 mm, bendras aukštis: 1 680 mm, bendras plotis: 1 950 mm, bendras svoris: 1 000 kg, tuščias svoris: 1 000 kg, padavimo eiga Y ašimi: 500 mm, juostinio pjūklo ilgas: 2 950 mm, pjūklo juostos plotis: 27 mm, dalies ilgis (maks.): 9 999 mm, reikalingas aukštis: 2 100 mm, vietos reikalavimas ilgis: 2 900 mm, reikalingas plotis: 1 950 mm, stalo ilgis: 2 800 mm, stalo plotis: 245 mm, darbinio aukščio: 890 mm, Papildoma techninė informacija pateikiama naudojimo ir priežiūros vadove, kuris perduodamas pardavimo metu. Kilus papildomiems klausimams, galite susisiekti telefonu arba el. paštu. Pagarbiai, Weber Geländersysteme Pgedpfxjx Dirzo Apyok

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, veleno skylė: 20 mm, Maszyna w idealnym stanie. Możliwość oględzin w trakcie pracy produkcyjnej w dowolnym momencie. Pgsdpfx Apou Ivw Tjysk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Pilnavidurė medžiaga 160 x 85 mm Pgjdpfxoy E Uk Io Apyok Apvali medžiaga Ø 100 mm Profiliai 165 x 85 mm Siegfried Volz staklės Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Vokietija

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 1 395 h, Calibrating and fine sanding machine, wide belt sander Kundig Brilliant with electronic segmented sanding pad, tiltable sanding unit, and lacquer sanding capability. A video of the machine in operation can be sent on request. This sanding automaton is ideal for interior joinery workshops and is also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam Edge segments can be switched on and off Pressure beam segment width 22mm (ideal for intermediate lacquer sanding) Pneumatically adjustable, grooved, rubber-coated calibrating roller with grain compensation Drive motor 11kW Infinitely variable feed speed from 3 - 15 m/s via frequency inverter Feed belt speed continuously adjustable from approx. 3 to 15 m/min Workpiece-controlled belt air-blast device Constant table height approx. 950mm by adjusting the top unit, allowing integration in sanding lines Feed belt still has very good grip and is in excellent condition Carpet with adjustable vacuum blower enables secure holding of even small parts Maximum sanding width approx. 1100mm Workpiece height approx. 3.5 to 200mm Abrasive belt dimensions 1120 x 2000mm Infeed and outfeed roller tables Hood locking mechanism Extraction connections: 1 x 180mm, 1 x 125mm Control terminal with 45 programmable sanding programs for automatic machine operation. Settable parameters: belt speed, feed speed, workpiece height, air-blast nozzle, vacuum blower, calibration roller adjustment, and parameters of the segmented sanding pad. Thickness measuring system with adjustable stock removal and Enormatic automatic thickness setting with feed activation, eliminating the need for constant manual caliper checks. Pgsdpfeyxg N Nex Apyok Programs for different sanding tasks can be saved and selected via smartselect. CE marking Operating manual 2 sanding inserts included All four bellows have been replaced Without pictured connection cable Original paint, only a few spots touched up Very good condition from a small workshop Machine has approx. 1395 operating hours, i.e. around 2 hours per week Dimensions approx. 1900 x 1650 x 2150mm (LxWxH) Weight approx. 2300kg Comes with large mobile storage table at belt height for storing sanding belts Table size approx. 1520 x 1360 x 950mm Includes various sanding belts from K80 to K400 The machine can be demonstrated at our facility by appointment. We only offer machines that are ready for demonstration in our warehouse—see "more offers from this supplier".

Būklė: reikia remonto (naudotas), 680 NAUDOTAS duonos ir batonų ilgintuvas. Įrangai reikalingas remontas. IŠORINIAI MATMENYS (cm): - plotis 105, - ilgis 320, - aukštis 180. - darbo plotis 50 (maksimalus batonų ar duonos ilgis) Įrenginį galima apžiūrėti mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos papildomos mokamos paslaugos: transportavimas. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIETIŠKAI, PRANCŪZIŠKAI, RUSIŠKAI IR UKRAINIETIŠKAI. Pgjdpfxjpy D S Ee Apysk

Būklė: naudotas, Gamybos metai: 2016, Automatic cutting table system for textile and leather Manufacturer: Atom Model: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum traverse speed: 80 m/min Maximum acceleration: 1G Vacuum output: 1 – 8 kW Power supply: 5.5 kW 380 Volt, 3 phase, 50 Hz Psdsyf Egxspfx Apyegk Compressed air: 6 bar, 200 l/min when using pneumatic tool holders: 9 bar, 400 l/min 2 Multi-tool heads operating independently, consisting of: Tool module for all tool attachments Plotting pen for applying markings 2 punch tools with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm 1 needle Continuous conveyor belt (transports material into the working zones) Vacuum table: divided into 300 x 300 mm squares High-performance vacuum turbine with frequency control, up to 1 – 8 kW High-intensity projector Servo drive for X, Y and Z axes Safety device with light curtain monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Weight: 1,630 kg 16426ä

Būklė: naudotas, Gamybos metai: 2020, Packaging Machine Fully Automatic Side Sealing Machine Profi Packer Manufacturer: Schlichter Podpfx Apexuglmjyegk Model: SCV 400 Pro Year of manufacture: 2020 Longitudinal sealing: continuous Photoelectric sensors: horizontal and vertical (standard) Compressed air: 6 bar Conveyor speed per minute: min. 5 meters, max. 30 meters Film core diameter: 76 mm Max. film roll diameter: 350 mm (700 mm with optional folding frame) Max. film roll width: 650 mm Sealing bar width: 300 mm Product width min. and max.: 50 mm to 410 mm Product height min. and max.: 1 to 250 mm Product length min. 50 mm, max. unlimited Film thickness: from 7 to 80 μm Film material: Polyolefin fine shrink film, Polyethylene, PVC; PLA and other bio films Cycles per minute: up to approx. 85 cycles Machine dimensions (L x W x H): 2,200 x 1,680 x 1,800 mm Weight: 800 kg Shrink Tunnel: Model: SCT 400U Year of manufacture: 2020 Pass-through width: 450 mm Pass-through height: 280 mm Heating power: 14 kW Dimensions (L x W x H): 2,065 x 1,065 x 1,340 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 25 181 h, Funkcionalumas: visiškai funkcionalus, ĮRANGA: FANUC 18i valdymas Pjdpfoyk A Uksx Apyegk apdirbimas iš galinės pusės sinchroninis velenas varomi įrankiai C ašis gaisro gesinimo sistema drožlių transporteris alyvos rūko ištraukiklis juostų padavimo žurnalas FMB TURBO 3-36

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 34 500 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, ĮRANGA: FANUC 18i valdymas Pgjdsy Hq Tzepfx Apysk Galinės pusės apdirbimas Sinchroninis griebtuvas Varomi įrankiai C ašis Detalių konvejeris Strypų padavėjas FMB TURBO 3-26

Būklė: reikia remonto (naudotas), 672 NAUDOTAS įrenginys ciabattai, kaimiškai duonai, įvairių dydžių ir storių gaminti. Įrenginys reikalauja remonto. IŠORINIAI MATMENYS: -ilgis: 300, -plotis: 85, Pgedpfxjpm Hmzs Apysk -aukštis: 155. Įranga yra mūsų sandėlyje (36-068 Bachórz) Galime atlikti įrenginio remontą, montavimą, paleidimą bei išduoti garantiją. Nurodyta kaina yra grynoji kaina. KALBAME ANGLŲ, VOKIEČIŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ KALBOMIS.

Būklė: reikia remonto (naudotas), 616 NAUDOTA linija mėsainiams, picoms, dešrainiams, pinsai, čabatoms gaminti. Turi atitinkamą įrangą aukščiau nurodytiems gaminiams. Linijai reikalingas kapitalinis remontas. IŠORINIAI MATMENYS (cm): - ilgis 970, - plotis 100, - aukštis 193. ĮRANGA: - miltų barstymas po tešla, - išpjaustymo stotis, - valcavimo, presavimo (tešlos sujungimo) stotis, - sėklų barstymo stotis, - giljotina su įvairiais sausainių išpjovimo šablonais, - atlieku šalinimo stotis, - formavimas ant kepimo padėklų stotis. Įrenginys yra mūsų sandėlyje (36-068 Bachórz) Galimas mokamas pristatymas. Nurodyta kaina yra be PVM. KALBAME ANGLŲ, VOKIETŲ, PRANCŪZŲ, RUSŲ, UKRAINIEČIŲ kalbomis. Pedsncfgdopfx Apyegk

Būklė: geras (naudotas), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Broschürenfertigungsstraße Die Maschine ist voll funktionsfähig und sofort einsatzbereit für die Produktion. Sehr geringe Laufleistung. Es handelt sich um eines der neuesten Modelle von Horizon. Die gesamte Anlage wird über das Bedienpanel eingestellt. Hergestellt in Japan. Die Linie besteht aus: – Horizon VAC-100a / VAC-100m Max. Format: 350 x 500 mm Min. Format: 120 x 148 mm Vakuum-Anleger 10 Stationen Stapelhöhe: 55 mm Pjdpsyur Nfsfx Apyegk Grammatur: 40–270 g/m² Stromversorgung: 230V Gewicht: 310 kg/Modul Touchscreen-Steuerung Sensoren für Papierstau, Doppel- und Fehlbogen Speicherung von bis zu 9 Aufträgen im Systemspeicher Horizon SPF-200A 10,4" Farb-Touchscreen Unterbrechungsfreies Arbeiten durch Fehlzusammenstellungsausschleusung Max. Format: 508 x 356 mm; Min. Format: 180 x 120 mm Max. Geschwindigkeit: 4.500 Broschüren pro Stunde Gewicht: 500 kg Drahtheftung mit Rückenkantung Zwei Hohner-Heftköpfe Bis zu 200 Aufträge können gespeichert werden Zusätzliche Optionen: Drahtzufuhrkontrolle und Blockheftmodul Horizon FC-200A Schneidestärke: 4–5 mm Stromversorgung: 230V Gewicht: 244 kg Neues Trimmerdesign, stabile Arbeitsweise dank Servomotoren, zusätzliche Broschürenführung. Touchpanel für schnellen Formatwechsel. Formatumstellung per Knopfdruck. Im Lieferumfang enthalten: LC-200 Auslage, Bedienwerkzeug, Ersatzteile und Dokumentation.

Būklė: geras (naudotas), Hohner HSB 9000 skaitmeninė brošiūrų gamybos linija Įrenginys yra labai geros būklės ir paruoštas gamybai. Gamybos metai: 2019. Atspausdinta tik 0,4 mln. brošiūrų. Tai vienas naujausių Hohner modelių. Visas įrenginys valdomas iš valdymo pulto. Pagaminta Vokietijoje. Ideali mašina efektyviai brošiūrų gamybai skaitmeninėje spaustuvėje. Jutiklinis ekranas greitam reguliavimui ir belaidis nuotolinis valdymas. Pedpfx Aoyur Emjpyjgk Įrenginys parduodamas su įrankiais, atsarginėmis dalimis ir dokumentacija.

Būklė: naudotas, Gamybos metai: 2002, Cutting diameter / mm Saw band length / mm Cutting width / mm KASTO tec AC5 Automatic Bandsaw Sawing power: 23 kW Machine weight: 5.9 t Year of manufacture: 2002 Approximate cutting ranges in mm: Round: 530 mm Square: 530 x 530 mm Flat: 530 x 630 mm Smallest workpiece to be cut: 10 x 10 mm Minimum cut length: 6 mm Minimum end piece length, single cut: 10 mm Minimum end piece length, automatic operation: 35 mm Automatic material feed, single stroke max. (standard): 600 mm Automatic material feed, single stroke max. (option): 1,500 / 3,000 mm Multiple material feed: 9,999 mm Machine roller conveyor length: 1,568 mm Max. piece weight: 2,275 kg Cutting speed: 12–120 m/min (steplessly adjustable) Pgsdpfx Aoxrg E Ispysk Cutting feed: steplessly adjustable Material feed: with ball screw spindle Automatic feed: with horizontal clamping vise Material clamping: hydraulic, steplessly adjustable Clamping force Main vise: 200–1,000 daN Feed vise: 200–2,000 daN Saw band tension: hydraulic, factory set Saw band cleaning: via easily replaceable double brush, driven by hydraulic motor. Coolant tank capacity: approx. 185 l Pump capacity: approx. 25 l/min Upon request, we can also offer you the 4 saw bands currently in stock for an additional fee.