Alö Frontlader pirkti naudotą (330)

Būklė: naudotas, Vėžių plotis ± 600 mm Bendra elektros galia: 33 kW Ljdpsz E H Rzofx Apneru terminis pajungimas: NW32 2x5 sluoksnių maksimali gaminio aukštis: ± 100 mm virimo laikas min/maks: 4-40 min maksimali temperatūra: 200°C automatinis keltuvas su juostos plovimo sistema tinka CIP valymui tinka garų įpurškimui (šildymui, gaminio išeigai): 4-8 bar, pajungimas: NW 40 kairys sukimasis

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), „Tomra“ optinis rūšiavimo įrenginys, modelis 1000 „Halo“. Lrodpfx Apeuixp Ejneu Skirtas didelio našumo rūšiavimui ir klasifikavimui. Viršutinis ir apatinis jutikliai su atmetimo funkcija. Tinka įvairiems daržovių ir vaisių produktams apdoroti.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, A complete production line for processing round timber, based on frame saw technology. The line is capable of processing logs from a minimum small-end diameter of 15 cm to a maximum butt diameter of 55 cm, with lengths ranging from 2.5 to 9.5 meters. The technology consists of: 1) A log handling cascade up to 10 meters in length with dosing system 2) Frame saw G710 by Královopolské strojírny - The frame saw is equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Separating wedges at the saw’s exit separate center and side timber - The saw is powered by a 55 kW electric motor - Detailed description in a separate file - Roller conveyors extend from the frame saw - Center timber is returned via conveyors and directed to the second frame saw - Side timber is continuously transported to the cascade, which conveys it to the edging center 3) Frame saw G560 by Královopolské strojírny - The frame saw is equipped with a dosing carriage on rails, including hydraulic centering - Separating wedges at the saw’s exit separate center and side timber - The saw is powered by a 45 kW electric motor - Detailed description in a separate file Ledpfx Aexa Ettopnoru - Side timber is directed via a roller conveyor to the edging center cascade - Center timber is collected immediately after sawing, loaded onto a rail-mounted carriage, and after the batch is complete, extracted from the sawmill using a winch 4) Edging center by Strojírny Loučná n. Desnou - Max cutting height 26 mm, cutting width 70 to 370 mm, total installed power 29.2 kW - Detailed description in a separate file - Side timber is fed vertically by the cascade into the edging center - If required, the timber is first cut to the desired production length. The length can be set as fixed or optimized for yield maximization - After trimming, the timber is edged to fixed widths to achieve maximum timber yield. After edging, the timber is automatically conveyed to storage boxes according to the trimmed lengths. The final product is unsorted side timber by width, usually 80 mm and above.

Būklė: naudotas, ašių konfigūracija: 3 ašys, pakaba: oras,

Būklė: naudotas, rida: 3 448 km, pirmoji registracija: 05/2009,

Būklė: naujas, Gamybos metai: 2025, Standalone linear scale for filling weights from 200–5000g, designed to be installed on a conveyor belt or at workstations. Stainless steel version equipped with a servomotor. - Specifications: Accuracy: < +/- 2g (depending on product and total weight); maximum machine cycle rate in idle mode: 15 cycles/minute; power supply: 380V, 0.7kW; machine dimensions: L875xW860xH2010mm; weight: 180kg. Lrodpfx Aov Nk Dmopneu Please note that our new prices are often below the usual prices for used equipment. Simply inquire and let us know your packaging requirements. – We typically have between 30 and 50 different new machines available from stock at any time. Additionally, we offer very short lead times for customer-specific machines, starting from around 3 weeks. – All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Single-head linear scale in tabletop design. Suitable for weighing fine granulates such as sugar, salt, monosodium glutamate, as well as coarser products like seeds, tea, muesli, nuts, monosodium glutamate, rice etc. Ljdpfx Ajv Nk Dtjpneru - Specifications: Weighing hopper capacity: 0.5 L; Weight range: 1–150 g; Accuracy: 0.2–1 g; HBM load cell; Maximum idle machine cycle rate: up to 15 cycles/minute; Power supply: 220V; Product-contact parts made of AISI 304 stainless steel; Machine dimensions: L600 × W500 × H750 mm; Weight: 80 kg. Please note that our new prices are often below the usual prices for used equipment. Feel free to enquire and tell us about your packaging requirements. Typically, 30–50 different new machines are always available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with full warranty.

Būklė: naujas, Gamybos metai: 2025, Single-head linear weigher as a benchtop model. Suitable for weighing fine granulates such as sugar, salt, MSG, as well as coarser products like seeds, tea, muesli, nuts, MSG, rice, etc. Lrjdpfx Ajv Nk Dyopnou Specifications: Weighing hopper capacity: 3 L, supply hopper: 50 L; weight range: 20–2000 g; accuracy: 0.2–1 g; HBM load cell; maximum machine cycle rate (idle): up to 15 cycles/minute; power supply: 220V; product-contact parts made of AISI 304; machine dimensions: L750 × W550 × H750 mm; weight: 85 kg. Please note that our new equipment prices are often below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. We generally have 30–50 different new machines available in stock for immediate delivery. For machines built to customer specifications, we offer very short lead times starting from approx. 3 weeks. All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, Stand-alone auger filler with weight feedback via connected weighing unit. Controlled by touchscreen and PLC. Product programming available. Hopper volume: 25 liters. Filling weight: 10–500g. Expansion of the filling range up to 5–600g possible by adding a second auger. Built-in level sensors and load cells ensure accuracy through continuous monitoring and automatic correction of dosing. Stainless steel version with servomotor. Includes: level sensor on the openable supply hopper for easy cleaning, adjustable filling head height, free-flow module for improved product flow control, and dust protection cover. Specifications: - Packaging accuracy (depending on product and total weight): 0–2% (for 0–100g), 0–1% (for 100–500g), 0–0.5% (for 500g and above) - Max. machine cycle rate (idle) per minute: 50 cycles/min - Power: 220V, 0.95kW - Machine dimensions: L800 x W790 x H1900mm - Weight: 130kg Please note that our new prices are often below the typical prices for used machines. Feel free to contact us and let us know your packaging application. Typically, 30–50 different new machines are always available immediately from stock. For machines made to customer specifications, we offer very short delivery times from approx. 3 weeks. All machines are available with full warranty. Lsdpsv Nk D Tsfx Apnjru

Būklė: naujas, Gamybos metai: 2025, Stand-alone auger filler with weight feedback via load cell. Operation via touchscreen and PLC. Hopper capacity: 50 liters. Filling weight: 10-5000g. Stainless steel version with servomotor. Included: Level sensor in the easy-to-clean, openable storage hopper, height adjustment for the filling head, free-flow module for improved product feed control, and dust cover. Lrodpev Nk Ekefx Apneu Specifications: Packaging accuracy (depending on product and total weight): 0-1.5% (for 0-100g), 0-1% (for 100-500g), 0-0.5% (for 500g and above); maximum machine cycle rate (idle): 40 cycles/min; power supply: 220V, 1.4kW; machine dimensions: L1150xW1000xH2100mm; weight: 200kg. Please note that our new machine prices are often below typical used equipment prices. Feel free to request a quote and let us know your packaging application. – We generally have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short lead times of approx. 3 weeks. – All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Stand-alone Auger Filler Desktop Version with touchscreen and PLC control. Simple and rapid program settings with check weighing via customer-supplied scale. Specifications: - Hopper volume: 8 liters - Filling weight: 2-100g - Stainless steel version with servo motor - Packaging accuracy: 0.3-1% (depending on product and total weight) - Max. machine cycle rate (idle): 30 cycles/min - Power supply: 220V, 0.4kW - Machine dimensions: L720 x W555 x H990mm - Weight: 80kg Lrodov Nk D Hopfx Apnsu Please note that our new prices are often below standard used equipment prices. Feel free to contact us and let us know your packaging application. We usually have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approx. 3 weeks. All machines come with a full warranty.

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Buffalo Machinery Microcut BNC 446, valdymas Fagor CNC 8055 TC, 8 padėčių revolverinė galva, kumštelis, tekėjimo ilgis 750 mm, tekėjimo skersmuo 250 mm, Lodpfxszc H Rmo Apnjru

Būklė: naudotas, Analoginis tacho Ilgaamžis DC tachogeneratorius Lrjdpfx Apeb E Nx Denju 40 voltų Tipas: TBD 0,09 LT-3

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. Ljdjfz Dubjpfx Apnjru - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Lrjdpfjfzkrnex Apnsu Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Būklė: naudotas, MDF-C8V1 VIP ULT šaldiklis-lada yra kompaktiškas –80 °C šaldiklis, naudojantis VIP PLUS izoliaciją, kad būtų maksimaliai padidinta talpa ir pagerintas energijos efektyvumas. Jo automatinė kaskadinė sistema su vienu kompresoriumi užtikrina didesnį efektyvumą ir taupo vietą. Pagrindinės specifikacijos Temperatūros diapazonas: ~–60°C iki –80°C (iki –80°C) Talpa: 84 l (3,0 kub. pėdų) Saugojimas: ~42 x 2" kriodėžės Šaldymas: automatinė kaskadinė sistema su vienu kompresoriumi (mišrus šaltnešis) Išmatavimai ir svoris Ljdpfx Apszh Ripjnjru Išoriniai (P×G×A): 550 × 685 × 945 mm Vidiniai (P×G×A): 405 × 490 × 425 mm Grynasis svoris: ~67 kg Užimamas plotas: ~0,37 m² Savybės Mikroprocesorinis valdymas su skaitmeniniu ekranu ir aliarmų sistema (temperatūra, elektros tiekimo sutrikimas) Energijos suvartojimas: ~7,2 kWh/dieną | Triukšmo lygis: ~47 dB(A) Pagrindinės naudojimo sritys DNR/RNR mėginių, ląstelių ir reagentų saugojimas Mažos tyrimų ir klinikinės laboratorijos Atsarginis –80°C saugojimas svarbiems mėginiams

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, approx. 4.5 m long feed and centering table Chain-driven from the feed motor Centers the round timber to the rotor axis Debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit Lodsu Hmacjpfx Apnjru Non-driven outfeed table Machine workshop-inspected Machine cleaned and newly painted

Gamybos metai: 2024, būklė: naujas, „OASI.S“ (atviros automatikos sistemų integracijos serveris) – robotizuota medžiagų tvarkymo sistema, skirta automatiškai užpildyti ir ištuštinti infuzinių maišelių ir dėklų. Ši sistema perveža užpildytus infuzinių maišelius iš švarios patalpos, išdėsto juos dėkluose naudojant „pick-and-place“ robotą, sukrauna dėklus ant padėklų ir perveža padėklus su tuščiais dėklais į gamybos linijas ir iš jų. Sistema sudaryta iš jungiamųjų konvejerių, švarios patalpos stoties su delta robotu, robotizuotos užpildymo stoties (delta robotas ir 4 ašių robotas) ir ištuštinimo stoties (du 4 ašių robotai). Liniją sudaro: Ljdpozx Aldsfx Apnsru - 3 „FANUC M-410iC/315“ robotai, serijos numeriai: R24500486, R24500487, R24500488, pagaminimo metai – 2024 m. - „FANUC M-3iA/6S“ delta robotas, serijos numeris R244001FB, pagaminimo metai – 2024 m. - „FANUC M-2iA/3SL“ delta robotas, serijos numeris R2430075E, pagaminimo metai – 2024 m. Kiekvienas robotų modulis yra aprūpintas specialiais griebtuvais, keturiais „Buuusch MM 1104 B V03 TNXX“ siurbliais, konvejerio padavimo įtaisais, papildomais valdymo spintelėmis ir kt.

Būklė: naudotas, Variklio galia / kW Lsdoy S Eb Ropfx Apnsru Voltai / V Amperai / A DECKEL MONITOR ekranas DIALOG FP2 / FP3

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Ledpsfz Apqjfx Apneru Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 17 kW (23,11 AG), bendras svoris: 1 140 kg, kuro tipas: benzinas, spalva: balta, ašių konfigūracija: 2 ašys, darbinė masė: 636 kg, tuščias svoris: 636 kg, kuras: benzinas 91, pavaros tipas: hidrostatinis, Gamybos metai: 2016, veikimo valandos: 760 h, Įranga: papildomi žibintai, visų varančiųjų ratų pavara,

Gamybos metai: 2025, būklė: naujas, PARDUODAMA TradeMak SQUALO 420 daugiaašmenė pjovimo staklės – KAIP NAUJA Parduodamos 2025 metų gamybos TradeMak SQUALO 420 daugiapjūklės staklės, su vos 100 darbo valandų. Įrenginys praktiškai kaip naujas, parduodamas dėl neįvykdyto plėtros projekto. Paruoštas iškart naudoti, nereikalauja jokių papildomų investicijų. Pagrindiniai techniniai duomenys: Darbinis plotis: 420 mm Didžiausias pjovimo aukštis: 200 mm Didžiausias praleidžiamas plotis: 700 mm Minimalus ruošinio ilgis: 800 mm Diskinių pjūklų diametras: 450 mm Padavimo greitis: 6–36 m/min Pagrindiniai varikliai: 2 × 45 kW PLC valdymas Jutiklinis valdymo skydelis Padavimo dažnio keitiklis Automatinė centrinė tepimo sistema CE sertifikatas Privalumai: ✔ Praktiškai nauja įranga ✔ Vos 100 darbo valandų Ljdpfx Aey Sw Eujpnsru ✔ Galinga pramoninė konstrukcija ✔ Puikiai tinka padėklų gamybai ir lentpjūvės gamybai ✔ Gali būti naudojama iškart ✔ Reikšminga taupymo galimybė, lyginant su naujos kainomis Pardavimo priežastis: investicinio projekto neįvykdymas. 💰 Kaina: 120 000 EUR + PVM 📍 Vieta: Mezőtúr, Vengrija Įrenginį galima apžiūrėti iš anksto susitarus.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2014, X ašies eiga: 250 mm, Z ašies eigos atstumas: 760 mm, bendras svoris: 2 100 kg, valdiklių gamintojas: FAGOR, valdiklio modelis: CNC 8055 TC, ašių skaičius: 2, 2014 m. pagamintas horizontalus tekinimo staklės. Šių „BUFFALO Microturn BNC 446“ staklių maksimalus tekinimo skersmuo yra 250 mm, o tekinimo ilgis – 750 mm. Jos turi 8 pozicijų įrankių revolverį ir 54 mm skersmens suklio angą. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite galimybę įsigyti mūsų parduodamą staklę „BUFFALO Microturn BNC 446“. Dėl išsamesnės informacijos susisiekite su mumis. • Maksimalus tekinimo skersmuo: 250 mm • Tekinimo ilgis: 750 mm • Velenėlio skylė: 54 mm • Velenų tipas: horizontalus • Eksploatacijos valandos: apytikriai 2 000 – 3 000 val. • Būklė: gera • CE ženklas: Taip Lrodpszc Ih Hjfx Apneu • Maitinimas: 3 fazės + PE • Įtampa: 400 V • Dažnis: 50 Hz • Prijungta apkrova: 15 kVA • Nominali srovė: 25 A • Maksimali apkrovos srovė: 25 A • Apsauga nuo trumpojo jungimo: 25 kA Papildomai: • Griebtuvas: Schunk ROTA-S Plus 2.0 200-52 • Užpakalinis suktuvas: MK4 • Įrankių revolverinė galvutė: 8 pozicijos • Revoliucijos padėtys: 8 Technical Specification Through-spindle Coolant No Counter Spindle No Driven Tools No

Gamybos metai: 2020, būklė: naujas, Automation Use of a photoelectric cell The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece, giving you the capability to activate the spray guns only when the object is within range, and to deactivate the guns immediately after processing is complete. The photoelectric cell is included in the standard equipment package. Identification of parts using special tags. A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, identifies the coated part, activates or deactivates the guns at the correct time, thereby reducing energy and powder consumption. Vertical detection of workpiece features. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the timing for when the part is due to appear in the gun area, allowing for selective activation or deactivation of the guns. Use of light barriers with multiple horizontal and vertical sensors. This solution enables precise measurement of the dimensions of the workpiece, allowing manipulators to be adjusted as well. Advantages of using gates and photoelectric cells The main advantages of using photoelectric cells or light barriers are energy and powder savings. It eliminates coating zones without workpieces. By using light barriers, precise gun control is achieved. Our lines can optionally be equipped with photoelectric cells or light barriers. The use of a photoelectric cell in the workpiece area allows you to measure the length of the workpiece and, therefore, to activate spray guns only when the object is within their operational range, and to deactivate the gun immediately upon completion of coating. Identification of parts with special tags A plate with identification holes is placed over the hanger. Based on this, the PLC, together with the photoelectric cell, recognizes the coated part, switching the guns on or off at the appropriate time – thereby saving energy and powder. By using light barriers with horizontal detectors, the PLC can analyze the vertical geometry of the workpiece. The PLC determines when the part will appear in the gun chamber, enabling selective activation or deactivation of the spray guns. Use of light barriers with multiple horizontal and vertical sensors This solution allows for the precise measurement of the workpiece's dimensions, enabling adjustment of the manipulators. The primary benefits of using photoelectric cells or light barriers are powder and energy savings. It eliminates painting areas without workpieces. Using light barriers ensures precise gun control. Vertical array of spray guns 8 pcs. guns Control – profiControl 10" Cyclone – CK-D1250 Dust collector – OZ-8H Center – RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Axis X MX-100 x 2 pcs. Lodpfx Apsflq Spenjru Horizontal gate – Horizontal gate W400 x 2 units Vertical gate – H2000 vertical gate The maximum coating speed is 1.65714285714286 m/min 0 pcs. tractors Air volume required: 10,188 m³/h for operation Minimum cabin passage required: W900mm H2100mm Duct diameter 500 mm – minimum 16.9 m/s 16 m/s Air consumption: 1210 l/min + Sug. SC-20 compressor Min. St

Būklė: naudotas, Lightbus combined input/output module, input-output module, parallel input/output, analog output, input module, Lightbus analog input module - Manufacturer: Beckhoff, Lightbus analog input Lodpoqqpklefx Apneru - Model: M2510 - Input voltage: 24 V DC - Price: per piece - Quantity: 2 units available - Dimensions: 165/75/H70 mm - Weight: 0.7 kg/unit