Heller Alkūninio Veleno Šlifavimo Staklės pirkti naudotą (48 773)

Būklė: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Iajdpju Tq U Isfx Alrou Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Būklė: naudotas, Technical Details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck, 160 mm - Chuck guard Iaedpfx Aleu Ixy Dsreu - Protection system WxH: 510x400 mm - Multifix tool holder (4 pieces) - Center in tailstock - Top slide pivotable +/-45°, max. travel = 100 mm - Cross slide travel = 300 mm feed - Coolant system pump (without supply piping)

Būklė: naudotas, Gamybos metai: 1960, Technical Details: Swing diameter over bed: 630 mm Swing diameter over cross slide: 320 mm Turning length: 2800 mm Distance between centers: 2800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. (LxWxH): 4.7 x 1.5 x 1.5 m Iodpju Ix A Ejfx Alrsau Thread cutting capability Accessories: 4-jaw chuck different centers gears jaws and small parts steady rest

Būklė: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Ijdpfsv A Sqhox Alroau Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Būklė: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Iasdpfxovav Sde Alrju Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Būklė: naudotas, Gamybos metai: 1982, Techninės detalės: Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Aukštis iki centrų: 225 mm Maks. šlifavimo ilgis: 1600 mm Atstumas tarp centrų: 1540 mm Ijdpfsw Rktzjx Alrsau Veleno skylė: 38 mm Maks. pasukamumas: 90° Apytikslis staklių svoris: 6,0 t Staklių matmenys (IxPxA): apie 4,4 x 2,45 x 2,3 m Staklės su CNC paketu ir DFU jungtimi Daugiarėžiminė matavimo galvutė pertrūkių paviršiui Palečių laikiklis su cilindriškumo klaidos korekcija Finibalanz balansavimo įrenginys

Būklė: naudotas, Gamybos metai: 1996, Technical details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm CNC control: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding. - With the plunge-cut method, the maximum plunge length is 160 mm. - Automatic workpiece discharge via rail (the function/operation of which is not known to WMW AG) - Working grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, infeed angle right 0-6° and left 0-2°; wheel size 280x160 mm Iaedpfeu Ngyzjx Alrsu - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: various grinding and regulating wheels available on request

Būklė: naudotas, Gamybos metai: 1981, Techninės detalės: Šlifavimo skersmuo: 240 mm Šlifavimo ilgis: 700 mm Centrų aukštis: 125 mm Stalo ilgis: 1525 mm (pasukamas) Atstumas tarp šlifavimo veleno ir stalo min./maks.: 225/410 mm Šlifavimo disko apsisukimų diapazonas: 1590 aps./min Šlifavimo disko diametras (naujas diskas): 600 mm Šlifavimo disko diametras (nudėvėtas diskas): 450 mm Pjovimo greitis: 50 m/s Bendra galia: 13 kW Mašinos svoris: apie 5,5 t Reikalinga erdvė (PxPxA): 2,8 x 2,2 x 1,8 m PUSIAU AUTOMATINĖ APVALI ŠLIFAVIMO STAKLĖ Papildoma informacija: - Šlifavimo veleno atramos poslinkis: 185 mm Iaedpfxou Ng Avs Alrju - Šlifavimo veleno atramos padavimas: 0,001-0,05 mm/min be laipsniavimo - Ruošinio veleno sukimosi greitis: 50-500 aps./min be laipsniavimo Mašina su įranga: - Pinolis su hidrauliniu atitraukimu - Aušinimo sistema - Profilio formavimo įranga - Šlifavimo disko balansavimo įranga - Šlifavimo veleno atramos skersinio padavimo įrenginys - Hidraulinis šlifavimo stalo reguliavimas, viršutinis stalas pasukamas ii.D.

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Turning length: facing: 165 mm / transverse: 160 mm Centre height over bed: 200 mm Gap length: no gap mm Spindle speed range: 48 - 1,500 / 10-step rpm Work spindle bore: 40 mm Feeds: longitudinal: 0.021...2.34 mm / transverse: 0.09...1.6 mm Tailstock quill taper: MK 4 Tailstock quill stroke: 125 mm Total power requirement: 2.2 kW Approx. machine weight: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: Iaedpsu Ixydsfx Alrju - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change toolholder - Foot brake - Coolant pump (delivery exclusive)

Būklė: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in gap: 600 mm Iajdju Ix D Aopfx Alrju Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swivels 30° right/left 2x T-slots for copying device Live center

Būklė: naudotas, Gamybos metai: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed Ijdpfxsu Ix Hdo Alrsau 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Taper turning attachment (cone 15° right/left) 4 change gears

Būklė: naudotas, Gamybos metai: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over faceplate slide: 200 mm Iodpfxou Ix Hqo Alroau Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 RPM / only 6 selectable speeds, left-right Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (transversal): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Approx. machine dimensions LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel paths: Longitudinal slide = 580 mm, Cross slide = 170 mm - incl. tool rest (steady for turning) - incl. change gears - Steady rest Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 RPM) Sale as described.

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Vidinis skersmuo: 63 mm Apsisukimų skersmuo: 800 - 320 mm Šlifavimo gylis: 380 mm Šlifavimo disko matmenys: Ø 65 x 25 mm (puodelio formos diskas) Pavaros greitis: 0,05 - 0,40 aps./min / 8 žingsnių aps./min Bendras galios poreikis: apie 1,1 kW Svoris apie: 1060 kg Staklių matmenys (I x P x A): 1,1 x 1,1 x 1,4 m Staklės stabdžių būgnų ir diskų tekinimui bei šlifavimui Iaodpfxju Ngaus Alrsu - Tekinimo ir šlifavimo Ø max./min.: 800 / 320 mm - Stabdžių būgno laikiklis: 63 mm, išilginis poslinkis 120 mm - Pagrindinis vežimas: išilginis eiga 380 mm; skersinis eiga 200 mm - Šlifavimo vežimas: skersinė reguliacija 60 mm; variklis = apsukos 3410 aps./min - Valdymas per valdymo pultą

Būklė: naudotas, Gamybos metai: 1974, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Turning length: 2100 mm Centre distance: 2000 mm Spindle bore: approx. Ø 60 mm Speed range: 35.5 - 1800 / 18 steps rpm Rapid traverse x-axis (cross slide): 4.2 m/min Tailstock quill taper: MT 5 Tailstock quill stroke: 180 mm Control voltage: 220 V Machine weight approx.: 3.25 t Machine dimensions approx. LxWxH: 3.5 x 1.2 x 1.6 m Thread cutting possible, e.g. metric thread, module thread and imperial thread Rapid traverse cross slide Chuck guard 2x chip trays Accessories: (see similar in photo) 2x steady rests (1x closed, 1x open) Faceplate 3-jaw chuck Iaodpju Ix Dcofx Alrsu Jaw sets Flange Centres Various gears

Būklė: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Iodpfju Ix E Hjx Alrsau Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Būklė: naudotas, Gamybos metai: 1998, Techninės detalės: Profilio aukštis: 180 mm Didžiausias šlifavimo disko skersmuo: 200 mm / puodelio formos diskas Šlifavimo disko skylė: nenurodyta Šlifavimo veleno apsisukimai: 2800 aps./min Stalo dydis (IxP): 500 x 160 mm Darbinė įtampa: 220 / 380 V Bendras galios poreikis: 3,0 kW Mašinos svoris apie: 0,57 t Mašinos matmenys (IxPxA): 1,28 x 1,0 x 1,75 m Pritaikymas priekinio paviršiaus šlifavimui Magnetinė stalo dalis: IxP = 680 x 200 mm; pakreipimas apie 15°; pasukimas 360° per radialinę skalę Magnetas: tipas S2D; pastovus magnetas, tvirtinimo paviršius 300 x 150 mm Šlifavimo disko laikiklis: - vertikalus reguliavimas = 180 mm rankinis; pasukimas apie 45° į dešinę/kairę rankinis Valdymas per valdymo pultą prie mašinos. Iedpsu Ngrqsfx Alroau Aušinimo skysčio talpa su pompa ir tiekimu

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Turning length: 1000 mm Centre height measured on bed: 250 mm Centre distance: 1000 mm Iaedpevvrpksfx Alreu Speeds: 18...1800 / 21-step rpm Spindle bore: 56 mm Tailstock quill travel: 180 mm Longitudinal feeds: 0.08 - 3.26 mm/rev Cross feeds: 0.04 - 1.63 mm/rev Rapid traverse X-axis: 4.2 m/min Total power requirement: 7.5 kW Machine weight approx.: 2.9 t Machine dimensions approx. LxWxH: 2.6 x 1.1 x 1.3 m 4-jaw chuck Ø 250 mm with internal jaws Live centre in tailstock 4-way quick-change toolholder Coolant system Accessories: Various reduction sleeves MK3-MK5-MK4 Live centre Drive dog 3-jaw chuck Ø 250 mm with internal jaws The machine does not comply with UVV (accident prevention regulations)!

Būklė: naudotas, Technical details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Isdpfx Alsvadd Isreau Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump 4 machine levelling feet Copying device

Būklė: naudotas, Gamybos metai: 1963, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 620 mm Turning length: 3150 mm Centre distance: 3150 mm Swing diameter in gap: 1200 mm Gap length: 800 mm Approx. machine weight: 11.5 t Approx. machine dimensions (LxWxH): 7.5 x 1.5 x 1.7 m Iedpfju Ix Arex Alreau Including 2 steady rests and various centres

Būklė: naudotas, Gamybos metai: 1994, Technical details: Grinding diameter: 198 mm Grinding length: 200 mm Z-axis, longitudinal: 240 mm X-axis, cross: 340 mm Control system: Tschudin CNC E 9034B Grinding wheel diameter: 500 mm Centre height: 100 mm Distance between centres: 300 mm Maximum workpiece weight between centres: 100 kg Interface: RS 232 Total power requirement: 16 kVA Machine weight approx.: 4.5 t Space requirements approx.: L: 3.1 x W: 3.2 x H: 2.0 m Inclined plunge-cut grinding machine with contour control Technical features: - Grinding spindle tool mount: 203.2 mm - Grinding spindle not swivelling - Workpiece spindle swivels +30° / -90° Iaodpsu Ng A Njfx Alrsu - Workpiece headstock taper: MT5 - Tailstock taper: MT3 - Control: ISO and graphical programming Equipment: - CNC control panel with floppy disk drive - Coolant system with paper filter - Electronic balancing device AB 100 T.K. - Grinding wheel change assist - Wheel dressing device (programmable for grinding profiles) - Automatic central lubrication - Measurement system (currently out of order, measuring control not connected) i.D.

Būklė: naudotas, Technical details: Swing diameter: 200 mm Centre distance: 450 mm Cross travel: 245 mm Longitudinal travel: 830 mm Table feed rate: 0.05-4.5 m/min, stepless Speed: grinding spindle 1,780 / 2,050 rpm Speed: workpiece spindle 50–500 rpm Grinding wheel dimensions: 350x32x127 mm Table size: 2,200x280 mm Table swivels both sides: 9° forward, 10° backward Iasdsu Ng Dgopfx Alrju Total power requirement: 6.0 kW Machine weight approx.: 2.2 t Machine dimensions: 2.2x2.05x1.6 m UNIVERSAL CENTRE GRINDING MACHINE without internal grinding device - For precision grinding of external (and internal) as well as tapered surfaces. - Grinding spindle head infeed manually or hydraulically - Hydraulic, stepless table feed - Grinding spindle swivels 60° - Workpiece spindle head swivels 90°, with Morse taper MK 4 - Tailstock with Morse taper MK 3 Equipment: - Wheel dressing device - Coolant tank incl. pump and feed line in current condition.

Būklė: naudotas, Technical Specifications: Grinding diameter: 260 mm Grinding length: 1000 mm Centre height: 130 mm Clamping length: 1000 mm Feed: manual Headstock adjustment: 280 mm, manual Total power requirement: approx. 6.0 kW Machine weight approx.: 1.5 t Machine dimensions (LxWxH): 2580 x 1750 x 1630 mm Non-Circular Grinding Machine (Crankshaft Grinding Machine) For grinding crankshafts, camshafts, etc. Machine table: - Swivable to the right/left: 6° each - Clamping surface – workpiece: 1240 x 156 mm Grinding spindle head: - Spindle head adjustment 150 mm relative to workpiece axis - Swivable to the right/left 90° in two planes - Feed stroke, manual hand feed: 280 mm - Grinding wheel/grinding body: 350 x 32 x 127 mm Internal grinding spindle type Fortuna SJ 60 x 250L Workpiece spindle head: - Speed: 25 – 65 – 155 – 400 rpm - Swivable manually +/- 90° Isdpfsu Ng Dtox Alrjau - Centre height: 130 mm Equipment: Tailstock equipped with dressing device, quick-release sleeve with centre point Machine available for demonstration.

Būklė: naudotas, Techninės detalės: Ruoinio ilgis: 600 mm Maks. pasukimo kampas: 100 laipsnių Iajdpfxeu Ng Hbs Alreu Pakreipimas ir nuolydis: dešinė/kairė: 30° laipsnių Šlifavimo disko skersmuo (nusidėvėjęs diskas): 175x35 mm Bendras galios poreikis: apie 1,5 kW Staklių svoris: apie 250 kg Matmenys I x P x A: I:0,85 x P:0,7 x A:1,6 m KARBITINIŲ ĮRANKIŲ GALĄSTUVAS (Tekinimo peilių galandimo staklės) Tipas: dvigubų šlifavimo diskų staklės Šlifavimo diskas = deimantinis diskas 175x35 mm Grąžto pjūtis per svirtį

Būklė: naudotas, Gamybos metai: 1987, Techninės detalės: Maksimalus šlifavimo skersmuo: 40 mm Ruoinio ilgis: 700 mm Stalo poslinkis: 0-50 mm Stalo poslinkis (nutaikymui): 25 mm Iodeu Ng Hnjpfx Alreau Kryžminis staliukas (skersai / transversalinis): 80 mm Veleno apsisukimų skaičius: 3000 aps./min Bendras galios poreikis: 3,3 kW Mašinos svoris apie: 0,8 t Reikalinga vieta apie: I:1,5 x P:1,5 x A:1,5 m Naudojimas / taikymas šlifavimo tipams: - 3-fasetinis šlifavimas; kryžminis šlifavimas; 3-pjūvių grąžtų šlifavimas; dešininio sukimosi spiralinis grąžtas - Šlifavimo diapazonas grąžtams Ø 5 - 40 mm dešininio sukimosi (Ø 5 - 40 mm įmanoma, tačiau prie mašinos pritvirtinta tik cilindriniams grąžtams Ø 3 - 15 mm spaudimo sklendė!) - Maksimalus galimas šlifuoti grąžto ilgis apie 700 mm, kai viršūnės kampas yra 140° - Šlifavimo disko pjovimo greitis 25 m/sek. - Centrinis tepimas - Centriniu pagrindu integruota aušinimo skysčio sistema Prie mašinos pridedamas įvairus priedų / įrankių komplektas.

Gamybos metai: 1984, būklė: naudotas, Technical Details: Max. material diameter: 120 mm Intended use: Laboratory operations Feed rate: Stage 1: 0.05 mm double stroke Feed rate: Stage 2: 0.1 mm double stroke Required air pressure: 5 - 6 bar Operating hours: 2,649 h Connected load: 5 kVA Machine length: 1,200 mm Machine width: 800 mm Machine height: 1,900 mm Machine weight: approx. 850 kg SAMPLE GRINDING MACHINE - Precision grinding machine for laboratory applications (e.g. steel and ice samples for spectral analysis) - Grinding automation with electronic control (in control cabinet) Iajdpfeu Ng Sdsx Alrou - Automatic and manual infeed of the grinding spindle - Workpiece clamping: electro-magnetic - 380V; 50Hz; 3 phases - Cup grinding wheel Ø 200 x 100 mm, bore Ø 51 mm - Coolant system