Chiron Mill 3000 High Speed pirkti naudotą (53 311)

Būklė: naudotas, Gamybos metai: 1982, mašinos/transporto priemonės numeris: 105981, Pressing force: 45 t Adjustable stroke: 20 - 80 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 300 mm Distance between columns L-R: 710 mm Table clamping area approx.: 700 x 450 mm Ram clamping area approx.: 700 x 360 mm Through-hole in table: 600 x 100 mm Strokes per minute: 80 - 400 min-1 Power requirement: 10 kW Height above floor approx.: 2900 mm Machine weight approx.: 7.2 t Control system: Siemens S7 Codpjuqc Ngsfx Akksrf Standard equipment With gripper feed. Machine was completely overhauled in 2001 with SIEMENS S7 control system.

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 131 542, Pressing force: 40 t Adjustable ram stroke: 8 - 50 mm Ram adjustment: 50 mm Shut height (stroke down, adjustment up): 290 mm Distance between uprights (L-R): 600 mm Crodeuqc Ezepfx Akkjf Distance between uprights (sideways): 190 mm Table clamping surface approx.: 600 x 500 mm Ram clamping surface approx.: 600 x 400 mm Through-hole in table: 500 x 110 mm Strokes per minute: 65 - 400 min⁻¹ Table height above floor: 1100 mm Power requirement: 32 kW Height above floor approx.: 2,800 mm Machine weight approx.: 6.2 t Additional equipment Machine was retrofitted with a roller feeder in 2002 Model MWVL-200, year of construction 2002

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 2177/03/9604014, Presavimo jėga: 160 t Stūmoklio eiga reguliuojama: 20 - 130 mm Stūmoklio reguliavimas: 100 mm Montavimo aukštis: 560 mm Stalo tvirtinimo paviršius apie: 1500 x 800 mm Stūmoklio tvirtinimo paviršius apie: 1400 x 800 mm Kėlimų per minutę skaičius: 20 - 60 min-1 Šoninis praėjimas: 520 mm Aukštis virš grindų apie: 3550 mm Galingumo poreikis: 48 kW Mašinos svoris apie: 26 t Standartinė komplektacija SIEMENS S7 valdymas Papildoma įranga Csdpjuqdzdjfx Akksrf Automatizavimas PME ritinio linija, sudaryta iš ritinėlio ir padavimo/tiesinimo įtaiso Ritinėlis Keliamoji galia 2 t Juostos plotis 400 mm Juostos storis 0,5–4,5 mm Ritinio išorinis skersmuo 1800 mm Išplėtimo diapazonas 470–630 mm Ritinėlio išplėtimas hidrauliškai Hidraulinė prispaudimo svirtis Elektroninis padavimo/tiesinimo įtaisas Didžiausias juostos plotis 400 mm Didžiausias medžiagos praėjimas 410 mm Medžiagos storis 0,5–4,5 mm Juostos skerspjūvis 1200 mm² Tiesinančiųjų volelių skaičius 7 vnt. Tiesinančiojo volelio skersmuo 80 mm Įtraukimo volelių skaičius 2 vnt. Įtraukimo volelių kėlimas pneumatiniu būdu Padavimo greitis 50 m/min Padavimo ilgis 0–10 m

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: 130861, Pressing force: 50 t Ram stroke: 54 mm Ram adjustment: 80 mm Installation height (stroke down, adjustment up): 303 mm Table clamping area approx.: 810 x 550 mm Strokes per minute: 65 - 400 min⁻¹ Machine weight approx.: 7.5 t Main drive power requirement: 11 kW Standard equipment Optional equipment IMCO pressing force measuring device Automation Cjdpfouqc Hlsx Akkerf Gripper feeder, type ZR18ZT1 Max. strip width 180 mm Feed length 150 mm

Būklė: naudotas, Gamybos metai: 1998, mašinos/transporto priemonės numeris: 10870, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm Ram adjustment: 64 mm Distance between uprights (L-R): 1100 mm Distance between uprights (sideways): 250 mm Table clamping surface approx.: 1080 x 650 mm Codpeuqd Abefx Akksrf Ram clamping surface approx.: 980 x 420 mm Through hole in table: 1060 x 200 mm Strokes per minute: 100 - 750 min⁻¹ Power requirement: 22 kW Machine operating hours: 16,850 h Height above floor approx.: 2471 x 1278 x 3150 mm Machine weight approx.: 9 t Standard equipment: BRUDERER precision roller feeder BBV 205 / 120

Būklė: naudotas, Gamybos metai: 1992, mašinos/transporto priemonės numeris: 120 4687, Press force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Distance between uprights (L-R): 800 mm Table height above floor: 1,150 mm Table clamping surface approx.: 780 x 640 mm Ram clamping surface approx.: 800 x 460 mm Pass-through opening in table: 690 x 170 mm Strokes per minute: 30 - 300 min⁻¹ Power requirement: 21 kW Height above floor approx.: 2,900 mm Credpjuqc I Asfx Akksf Machine weight approx.: 12 t Control: Siemens S5 Standard equipment: Roller feed type WAV - RDS 2E 1125 Maximum strip width: 310 mm Strip thickness: 0.3 - 3 mm Strip cross-section: 630 mm² Feed speed: 80 m/min Roller diameter: 125 mm

Būklė: naudotas, Gamybos metai: 1986, mašinos/transporto priemonės numeris: 131234, Spaudimo jėga: 63 t Stūmoklio eiga reguliuojama: 8–60 mm Codpfow Tuqpjx Akkorf Stūmoklio reguliavimas: 80 mm Įrengimo aukštis (eiga apačioje, reguliavimas viršuje): 300 mm Stalo tvirtinimo paviršius apie: 810 x 550 mm Stūmoklio tvirtinimo paviršius apie: 700 x 420 mm Pereinamasis atidarymas stale: 550 x 140 mm Atstumas tarp alyvos surinkimo padėklų: 700 mm Stalo aukštis virš grindų: 920 mm Eigos skaičius per minutę: 65–400 min⁻¹ Mašinos svoris apie: 8 t Matmenys IxPxA: 2935 x 1170 x 3000 mm Pagrindinio variklio galingumo poreikis: 11 kW Standartinė komplektacija Papildoma komplektacija Krumpliastiebiai su rutuliais įrankių keitimui, IMCO spaudimo jėgos matuoklis Automatizavimas Žnyplinis padavimo įrenginys, tipas ZR 250 Maksimalus juostos plotis: 250 mm Padavimo ilgis: 210 mm

Būklė: naudotas, Gamybos metai: 1981, mašinos/transporto priemonės numeris: 104680, Pressing force: 45 t Adjustable ram stroke: 10 - 40 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 220 - 300 mm Distance between uprights (L-R): 560 mm Table clamping area approx.: 550 x 450 mm Ram clamping area approx.: 550 x 360 mm Pass-through opening in table: 450 x 100 mm Csdeuqcwdjpfx Akksrf Strokes per minute: 100 - 500 min-1 Power requirement: 7.5 kW Machine weight approx.: 6.2 t

Būklė: naudotas, Gamybos metai: 2001, mašinos/transporto priemonės numeris: 150204, Press force: 100 t Ram stroke: 300 mm Ram adjustment: 125 mm Daylight (stroke down, adjustment up): 600 mm Distance between uprights (L-R): 2,020 mm Distance between uprights (sideways): 620 mm Table clamping area approx.: 2,000 x 1,000 mm Ram clamping area approx.: 2,000 x 900 mm Credpovmfznefx Akkef Die opening in table: 1,700 x 300 mm Strokes per minute: 10 - 50 min-1 Table height above floor: 1,200 mm Power requirement: 39 kW Overall height above floor approx.: 4,400 mm Dimensions LxWxH: 5,166 x 2,500 x 4,400 mm Machine weight approx.: 38 t Standard equipment: Electric overload protection SIEMENS S7 control Two-hand operation Optional equipment: Automation: Schleicher straightening machine (650 mm, max. 2.0 mm) Wanzke decoiler (max. 6 t) Helmerding feeder (600 mm, 0.6 - 6.0 mm)

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Crodpfx Aeynt Ucekksf Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: nepatikrintas, Techniniai duomenys Gamintojas ir modelis: Bruderer BSTA 25 EL Nominali spaudimo jėga: 250 kN, 25 tonų Pagaminimo metai: 1992 Valdymo atnaujinimas: 2020 Maks. eigos dažnis: 100–1425 eigos/min Reguliuojamas eiga: 13, 16, 19, 25, 32, 38 mm Stalo matmenys: 640 x 530 mm Atstumas tarp stulpų: – Išilginis: 640 mm – Skersinis: 220 mm Cedpfxsyktftj Akkjrf Įrengta BBV 190/85 ritininė padavimo įranga dešinėje pusėje. Maks. juostos plotis: 160 mm Padavimo ilgis: kintamas iki maks. 85 mm Papildomai: garso izoliacijos kabina Alyvos siurblys, alyvos šilumokaitis Priekiniai ir galiniai apsauginiai gaubtai Montuota ant 4 spyruoklinių kojelių Stūmoklio reguliavimas: 51 mm Yra dokumentacija. Staklių svoris apie 5000 kg.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 2 200 mm, Z ašies eigos atstumas: 1 100 mm, X ašies padavimo greitis: 50 m/min, Y ašies padavimo greitis: 50 m/min, padavimo greitis Z ašis: 50 m/min, stalo ilgis: 4 000 mm, stalo plotis: 2 000 mm, veleno greitis (maks.): 22 000 aps./min, sukimo momentas: 128 Nm, veleno nosis: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA X-axis travel (longitudinal): 4,000 mm Y-axis travel (transversal): 2,200 mm Z-axis travel (vertical): 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling elements. Direction of the T-slots runs parallel to X-axis movement. Cedpfx Akjzb Evljksrf AXIS SPECIFICATIONS: Axis feedrate: 50,000 mm/min Acceleration: 4 m/sec² WORKING FIELD Maximum horizontal passage: 3,200 mm Maximum vertical clearance under bridge: 1,926 mm Table height from floor: 330 mm UNIVERSAL HEAD WITH CONTINUOUS POSITIONING FOR ELECTROSPINDLE Automatic universal head, indexable to 360,000 positions (every 0.001°). The rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercutting. Built-in cooling system for bearings and head drive motors. B-axis rotation range: +/-185° A-axis rotation range: +/-185° Maximum axis rotation speed: 30 rpm Maximum available torque during operation on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Spindle power available (S1/S6): 22/33 kW Spindle torque available (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool holder: HSK-A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The use of the cradle occurs outside the effective working area, so the machine's real capacity is not reduced. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic 30-position chain tool changer located at the rear of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent positions occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg SCALE PRESSURIZATION: Complete pneumatic system with control unit for the pressurization of linear encoders. SPRAY-MIST TOOL COOLANT: Mist coolant lubrication system. The mist is generated by mixing air and oil. Activation is controlled via M-function. Using spray-mist improves cut quality, prevents material buildup, keeps the cutting area clean, and provides cooling. Very useful for improving surface finish quality. EXTERNAL TOOL COOLING: System for distributing coolant managed by CNC with nozzles arranged around the spindle flange, includes a tank (1,200 liters) for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • Various tooling included with the machine • Renishaw probe • BLUM laser presetting • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • No. 2 chip conveyors mounted on both sides of the work table • Operating and maintenance manual, and CE conformity declaration

Būklė: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, stalo ilgis: 950 mm, stalo plotis: 910 mm, spaudimo jėga: 80 t, bendras svoris: 16 500 kg, perforavimo jėga: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: Max.: 1,000 spm Min.: 100 spm Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool mass: 600 kg Maximum tool width: 970 mm Clamping area table: L–R: 950 mm F–B: 910 mm Clamping area ram: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip feeding height: Max.: 160 mm Min.: 70 mm Strip feeder (left) Bruderer BBV 202/120 Max. strip width: 202 mm Feed length: 0–120 mm Table opening: L–R: 920 mm F–B: 320 mm Crjdpfoxzr Ruox Akkjf Machine dimensions: Length: 2,834 mm Width: 1,742 mm Height: 3,460 mm Total weight with 1× BBV 202: approx. 17,500 kg Control cabinet dimensions: Length: 1,200 mm Width: 500 mm Height: 1,025 mm Weight: approx. 250 kg The soundproof enclosure is not included in the offer, but can be purchased separately. A large selection of other Bruderer, Schaal, Mabu and Bihler presses as well as decoilers and straightening machines are also available from stock.

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Codpfsylnpisx Akkerf Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: Blinie, BSTA 30 Stroke rate: 600 spm Feed BBV 120/60 High performance: 600 spm Press force: 30 tons Max. strip width: 190 mm Further high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50 as well as Schaal and Mabu presses. Crodjdguhcspfx Akkjf

Būklė: geras (naudotas), BSTA 30 Stroke rate: 600 spm Feed: BBV High-performance: 600 spm Max. pressing force: 300 kN Max. strip width: 190 mm Machine overhauled Good condition More high-speed presses in stock from Bruderer (models BSTA 18, 20, 30, 200, 50) as well as Schaal and Mabu presses. Codpfoda Ha Nsx Akkerf

Būklė: geras (naudotas), BSTA 18 Feeder BBV High-performance: 600 spm Maximum press force: 180 kN Codpfxj Udtyo Akkerf Maximum strip width: 120 mm Bruderer BBV190 feeder Completely overhauled, silicone-coated Good condition More high-speed presses in stock by Bruderer (models BSTA 18, 20, 30, 200, 50) as well as presses from Schaal and Mabu.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Boom travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 x 18 mm T-slots each on the machine base, rear and left • Machine lamp • Centralized lubrication • Table surface machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose - min. mm 40 table surface max. mm 710 Distance spindle nose - min. mm 840 base plate max. mm 1510 Crodpfsyhdvkex Akksf Drilling radius min. mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Maximum drilling capacity solid Steel 60 Ø 45 Cast iron 22 Ø 55 Thread cutting Steel 60 M 36 Cast iron 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 constant from min⁻¹ 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Wiring diagram

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Cedeu Dg D Ajpfx Akkorf Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 Crsdpfx Akjvv Spkskof CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naudotas, Gamybos metai: 1991, veleno tvirtinimas: MK 4, Darbo stalas 600 mm x 1200 mm Konsolės eiga 600 mm Įrankio laikiklis MK 4 Codox N Iftopfx Akkorf Gręžimo geba 40 mm pliene Sriegiklio įrenginys Aušinimo skysčio įranga Dokumentacija

Būklė: naudotas, Gamybos metai: 1991, Darbo stalas 600mm x 1200mm Konsolės eiga 600mm Įrankio tvirtinimas MK 3 Gręžimo pajėgumas 28mm pliene Csdpfx Aexpfglekkerf Sriegimo įrenginys Aušinimo sistema Dokumentacija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each at machine base rear and left • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Tool holder MK 4 Column diameter 195 mm Table dimensions 1200 x 750 mm Number of T-slots 5 Crsdpfxsx Uwpxo Akkjf T-slot spacing 125 mm Quill stroke 220 mm Column travel 450 mm Distance spindle collar - min 40 mm table top max. 710 mm Distance spindle collar - min 840 mm base plate max. 1510 mm Drilling radius min 540 mm max. 1590 mm Working table height 900 mm Machining Capacities Drilling capacity in solid St 60 ⌀ 45 GG 22 ⌀ 55 Tapping St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range: 15 - 2800 rpm Torque max. 250 Nm constant from 15 - 200 rpm Feed Drives Infinitely variable feed 0.02 - 0.7 mm/rev Feed force 12000 N Electrical Data Operating voltage / frequency 400 V / 50 Hz Control voltage 24 V Total connected load 9.3 kVA Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm 2600 kg Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Cedpfxexn A Spe Akksrf Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Crsdpox N Ih Isfx Akkjf Išsikišimo eiga 600 mm Įrankio tvirtinimas MK 4 Gręžimo galia 32 mm pliene Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Pilnai atnaujintas 2026 m.