Canon V1000 pirkti naudotą (6 514)

Būklė: naujas, Number of sanding units: 2 pcs Sanding width: 290 mm Max. sanding height: 180 mm LÖWER DoubleSander Solid DSM 3000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window profiles, etc. Robust top-quality design with long cast iron tables, brushing and finishing device, and conveyor belt feed. Suitable for high continuous loads even with higher material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad enables high material removal with a uniformly flat contact area - Maintenance- and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional accuracy - Auxiliary cooling of sanding zones for cooler sanding and longer abrasive belt lifespans - Forced-guide pneumatic belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-dimensioned linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom side) via precision lead screw with measurement display via dial ring (resolution 0.1mm) - Abrasive belt tensioning via pneumatic cylinder with constant clamping pressure - Quick abrasive belt change with pneumatic belt release in seconds - Adjustable belt tracking during changeover - Electro-pneumatic compressed air monitoring - Feed safety device via contact roller for excessively thick workpieces - Workpiece transport via calibrated slip-resistant and non-slip conveyor belts over heavy, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Continuously variable feed gear motor for rapid adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the infeed side - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 300 mm - Working width: 290 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 7.5 kW Fedpfx Anjyrty Te Hegh - Feed motor: 1.0 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units, each 0.37 kW, with fiber brushes D 120 x 300 mm - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2,105 mm - Length with control panel: 2,490 mm - Width: 980 mm - Height: 1,910 mm - Weight: approx. 1,650 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE version ----- Price of the above-mentioned machine on request! ----- Optional accessories at extra cost: Workpiece blow-off: - Arranged via nozzles above and below at the machine outfeed, pneumatically controlled Abrasive belt blow-off: - Via nozzles directly at the radii of the tension rollers, situated within the dust extraction, timer-controlled on/off, each 5 sec, can be switched on separately Disc unit ...

Būklė: naujas, Maximum cutting width: 250 mm Maximum cutting height: 80 mm Saw blade diameter: 400 mm Motor power: 3.0 kW Speed: 2800 rpm Compressed air connection: 6-8 bar Working height: 900 ±20 mm Dimensions (L/W/H): 530 x 869 x 1217 mm Fsdpfsxmk Ddex An Hsgh SALVAMAC Legend 400 Fast semi-automatic crosscut saw ----- Maximum cutting range: 220 x 80 / 250 x 50 mm. (When sawing stacked boards, please note: rear fence height 100 mm) The structure is entirely made from robust, thick-walled steel, fully painted and reinforced. A solid floor anchoring system is equipped with flanged steel feet to ensure secure fastening. Two-handed operation is ergonomically positioned to allow comfortable and efficient use. Saw motor power: 3.0 kW. The cutting speed can be adjusted via a pneumatic regulator, enabling precise controls. Furthermore, the system is equipped with a shock-absorbing mechanism to minimize vibrations and enhance workplace safety. TCT circular saw blade, diameter 400 mm, Z=96. The top pressure hood is controlled electro-pneumatically for precise operation. The hood movement system operates via innovative ball bearings with double dust protection and an automatic lubrication system, guaranteeing smooth performance. Additionally, the electrical installation is compliant with CE standards. CE models are supplied as standard with infeed and outfeed tables of at least 1 meter in length (either with idler rollers or a flat table) to optimize operation and meet safety requirements. Technical data: ----- Max. cutting cross-section: 220 x 80 / 250 x 50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: TCT Z=96 Blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction socket: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 ----- Total price ex works: on request! ----- Options such as: - Infeed/outfeed with idler rollers or flat table - Mechanical or pneumatic stops - Electronic length stop / Salvastop (Combo Series) - Movable front guard and more available on request! ----- (Technical data as per manufacturer – subject to change without notice!)

Būklė: naujas, Working lengths: 3,700mm, 5,100mm, 6,100mm Fsdexmk Agspfx An Hogh Working height: 160 mm Swiveling: yes Control unit: yes Rapid DGL 200 E Double Mitre Saw ----- with 500 mm saw blade diameter, electronic length and angle adjustment (45° and 90°, intermediate angles can be manually set using a scale) Precise profile cutting ----- For precise and burr-free cutting of aluminium, plastic and wood profiles. System features: ----- - Automatic length adjustment - Manual or electro-pneumatic angle adjustment 45°-90° - Saw blade Ø 500 mm - Extremely stable machine bed - Complete enclosure of guide bushings around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Application examples: ----- Window, door, facade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-Aluminium - Aluminium - Wood, Wood-Aluminium Perfect dimensional and angular accuracy guaranteed. ----- With the DGL200E double mitre saw, we offer you a reliable quality product from our range of precision double mitre saws, enabling you to impress your customers with flawless, high-quality components. Cutting lengths can be loaded into the control system of this double-head mitre saw via network or USB connection, or entered manually via the keypad. Special software solutions enable automatic positioning for cross-cutting, excess lengths or undersize; this allows processing of lengths outside the standard cutting range of the machine. An optimisation program with remnant processing helps to minimise waste, enabling more cost-effective work and reducing the demand for valuable materials such as aluminium, plastic or wood sustainably. A thermal label printer with dispenser function, ergonomically positioned directly beneath the control terminal, allows efficient labelling of finished parts. Good and controlled offcut removal from the base machine can optionally be supplemented by a conveyor belt system. Technical Data ----- Drive: 2 x 2.2kW three-phase motors 400 Volt Swivel range: manually 45° to 90° (up to 135° optional) Saw blade: 500 mm diameter Cutting lengths: 3,700mm, 5,100mm, 6,100mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: electronic Air pressure: 7 bar Dimensions: 5,250/1,420/1,900mm Weight: 1,260kg Control ----- PCE 6000 Positioning and cross-cut control PCE 6000 based on Windows 10 IoT operating system for modern window production on RAPID double mitre saws. 128 GB SSD, 8 GB RAM, approx. 10 GB database for cutting programs and profile data. Standard features: - Single cut - Program cut - 2x USB interface - TFT screen - Graphical representation of profile cross-sections - Backlit display - Control display integrated into two-hand operating panel Optional features (at extra cost): - Remnant piece optimisation - Software stop for excess lengths - Software stop for short parts - Cross-cut function - Profile height measuring device - Label printer (standard label...

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: MH-FJ-2_2, Our VOGEL MH-FJ-2 carton sealing machine features a side drive-belt system. Within the specified range, the machine automatically adjusts to the respective carton size. Fjdpfjz E Iqpsx An Hegh Carton sizes: Length 150 – ∞ mm Width 140 – 480 mm Height: 120 – 480 mm Technical Data: Length 1,150 mm Width 1,005 mm Weight 250 kg Operating voltage 220 V Air 5 kg/cm² CE marking IMPORTANT: This machine requires an external compressed air supply, which is not included in the delivery. Our MH-FJ-2 carton sealer has been specially developed for switching between different carton formats. Thanks to pneumatic adjustment of height and width, constantly changing carton sizes can be processed quickly and easily without manual intervention. The machine adapts instantly to various formats. Two side and two top conveyor belts ensure your cartons are securely conveyed through the sealer. The lid flaps of the cartons must be manually folded down before they are fed into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine-grade adhesive tape with more meters per roll (compared to hand rolls), so you can work longer without having to change the tape! The machine is compatible with both PP and PVC tapes as well as environmentally friendly paper adhesives. The taping heads can be easily removed for tape roll changes. This feature also allows the machine to be used for sealing only the top of the carton (keyword: auto-bottom cartons). Naturally, this machine is CE marked. Please note: an on-site compressed air connection is required to operate this machine! Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, and roller conveyors.

Gamybos metai: 2026, būklė: naujas, Our KVK 5 is a semi-automatic rotary arm wrapper which, compared to our turntable wrappers, offers the advantage that your pallets can be placed at ground level for the wrapping process. Equally ideal for light and unstable as well as heavy goods, since no centrifugal forces arise and there is no need to consider load capacity. Additionally, the KVK 5 model is equipped with a pre-stretch system for 250% film elongation. This pre-stretch system allows you to produce up to 3.5 meters of film on the pallet from just 1 meter of film on the roll, significantly reducing your material consumption. Fjdpfjz E Ixtex An Hsgh With the KVK 5, only minimal film tension is applied, so even light goods are not pulled off the pallet. Only the attachment and cutting of the film must still be done manually on this wrapper. With a machine weight of almost 1000 kg, you can see how robustly and stably this wrapper is built. With its rotary arm, it can wrap pallets up to a maximum size of 1.00 x 1.20 x 2.40 m. With adjustable speeds for the rotary arm and film carriage, as well as a pre-stretch unit regulated by potentiometer, you can perfectly adjust automated wrapping to your product. Automatic pallet detection via photocell is as standard as adjustable top and bottom wrap cycles. Programs are available for upward wrapping only, up and down (cross wrapping), and weatherproof (rainproof) wrapping. In addition to an optional photocell for detecting dark goods or black film, this wrapper can be supplied either for wall mounting or with the pictured support feet. We recommend this model if it is important for you to avoid overcoming a ramp with your goods—for example, if they are too heavy or unstable. The fact that, due to this design, the rotary arm moves around the pallet, also eliminates any centrifugal force. This, combined with the low film tension of the pre-stretch system, makes the KVK 5 ideal for very light goods. For further information, we have attached the technical data sheet as a PDF to this listing!

Gamybos metai: 2026, būklė: naujas, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with a turntable. It is equipped with a pre-stretch system for 250% film elongation. With this pre-stretch system, you can generate up to 3.5 meters of wrap from 1 meter of film on the roll, significantly reducing your material consumption. Additionally, this system results in minimal application tension, ensuring that even lightweight goods will not be pulled off the turntable. Weighing 700 kg, this model is extremely stable and designed for loads up to 1,500 kg. The KVK 3 Slim Line is equipped with a 1,500 mm turntable and, as standard, can wrap pallets up to 2,250 mm in height. With adjustable speeds for both turntable and film carriage, as well as a power-stretch unit controlled via potentiometer, you can perfectly adapt the automated wrapping process to your products. Automatic pallet detection (via photocell) is included as standard, as are adjustable top and bottom wraps. The machine offers programs for 'up & down' (cross wrapping) as well as 'weatherproof' wrapping. Manual operation is also possible if required. Fodpjz E Iwiofx An Hjgh If you need to relocate the wrapper, it can be easily lifted and moved by a forklift via integrated cut-outs. Optional accessories include a suitable drive-on ramp and a photocell for detecting dark goods or black film. This model is our clear recommendation if you regularly wrap very light goods or need to stretch-wrap more than approximately 20 pallets per day, provided your pallets do not exceed 800 x 1200 x 2250 mm. For further information, we have attached the technical data sheet as a PDF to this advert!

Gamybos metai: 2026, būklė: naujas, mašinos/transporto priemonės numeris: KVK 3 Automatik_1, This automatic stretch wrapper with turntable independently applies the film to the pallet and cuts it off after the wrapping cycle—unlike the KVK 3, which requires manual intervention. Wrapping can conveniently be started via remote control, eliminating the need to dismount from the forklift or bend down to attach the film to the pallet. It is also equipped with a pre-stretch system offering 250% stretch. With this, you can turn 1 meter of roll film into up to 3.5 meters of film on the pallet, significantly reducing material consumption. Additionally, this system applies minimal film tension, ensuring even lightweight goods are not pulled off the turntable. Fgodpfx Aoz E Imqjn Heh Weighing 700 kg, this model is highly stable and designed to handle loads of up to 2,000 kg. The KVK 3 Automatic features a 1,650 mm turntable and can, as standard, wrap pallets up to 2,400 mm in height. Adjustable speeds for both the turntable and film carriage, as well as a power stretch unit controllable via potentiometer, allow you to perfectly adapt the automated wrapping process to your product. Automatic pallet detection (via photocell) comes as standard, as do adjustable top and bottom wraps. Wrapping programs include "up only", "up & down" (cross-wrapping), and weather-tight wrapping. Manual operation is also possible if required. Should you need to use the wrapper at another location, it can easily be lifted and moved with a forklift via integrated slots. Options: In addition to a suitable ramp and a photocell for detecting dark goods or black film, the KVK 3 Automatic can optionally be configured for greater wrapping heights (up to 3,200 mm). This model is our clear recommendation if you are wrapping very light goods or regularly need to wrap more than approx. 30 pallets a day, with automatic film application and cutting. For further details, we have attached the technical data sheet as a PDF to this listing!

Gamybos metai: 2026, būklė: naujas, Our KVK 1S – Economic is our most affordable option for acquiring a semi-automatic stretch wrapper. Only the application and removal of the film must still be performed manually with this wrapper. The model is robustly built with a weight of 600 kg and is designed for loads of up to 1,500 kg. The KVK 1S Economic features a 1,500 mm turntable and can wrap pallets up to a height of 2,250 mm. With adjustable speeds for both the turntable and film carriage, as well as a mechanical brake, you can easily tailor the automated wrapping process to your product. Automatic pallet detection is standard, as are adjustable top and bottom wraps. The machine offers programs for “up only” wrapping, “up & down” (cross wrapping), as well as “weatherproof” wrapping. If required, the wrapper can also be operated manually. If the wrapper needs to be relocated, it can easily be lifted and moved with a forklift, thanks to integrated cut-outs. Optional features include a drive-on ramp and a photocell for the detection of dark packages or black film. The KVK 1S Economic is our recommendation if you want to switch from manual to automatic pallet wrapping with the lowest possible investment. This machine is ideal for shippers handling up to approximately 10 pallets per working day. For further information, the technical data sheet is attached to this advertisement as a PDF! Fsdpfxjz E In Io An Hegh

Būklė: naujas, Gamybos metai: 2026, bendras svoris: 500 kg, bendras ilgis: 28 650 mm, bendras plotis: 16 500 mm, bendras aukštis: 25 230 mm, įėjimo įtampa: 230 V, garantijos trukmė: 12 mėnesiai, About this machine: This machine comes with a 24-month warranty. On request, we can also offer you a suitable drive-on ramp, a photoelectric sensor for black detection, or the appropriate machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees consistently uniform results thanks to up to 32 storable programs, thereby eliminating the "human factor". It is as space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system—these are the key advantages of this machine! The electromagnetic brake allows precise film tension adjustment at each stage (bottom wrapping, upward wrapping/head wrapping, downward wrapping), which can be stored in the programs. Within the programs, you can also set the speed of the film carriage and turntable. Additionally, head wraps, bottom wraps, and film overlap at the end of the pallet can be individually stored for each program. This enables you to create custom programs for each packing scheme, allowing you to consistently achieve optimum wrapping results. Programs can be password protected, so the operator can select only from the pre-set programs. Fedpfsz E Ilaox An Hogh With a weight of 500 kg, this model is designed for loads up to 1,200 kg. Our Profiline LP features a 1,650 mm turntable and can standardly wrap pallets up to 2,500 mm high. Automatic pallet detection (via photocell) comes as standard, as do adjustable head and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be perfectly tailored to your needs. Do you require a higher mast, film pre-stretch, or an automatic film cut-off? Virtually anything is possible with this machine! We are happy to configure this machine as a new unit with options suited to your needs. About us: Business is done between people—that is our conviction! A supplier merely delivers the ordered goods—a partner does more: they help you find the best equipment, support you in achieving your goals, and are there for you in case of issues or challenges! That’s our belief. For over 40 years and now in the 4th generation, we have been the partner for medium-sized businesses in all matters relating to “stretching and bonding”. We are also happy to advise you on which pallet wrapper from our portfolio offers the best solution for your requirements!

Būklė: naujas, Gamybos metai: 2026, bendras svoris: 420 kg, bendras ilgis: 31 000 mm, bendras plotis: 16 800 mm, bendras aukštis: 25 800 mm, įėjimo įtampa: 230 V, garantijos trukmė: 24 mėnesiai, About this machine: This Profiline TP pallet wrapper is a brand-new unit in stock. You will receive a 24-month warranty with this machine. Upon request, we can also offer a suitable access ramp, a photocell for black object detection, or the matching stretch film! About this model: Our Profiline TP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 programmable memory slots, providing reliable elimination of the “human factor”. Thanks to the electromagnetic brake, the film tension can be precisely set and stored in the programs for each wrapping phase (bottom wraps, up-wrapping, top wraps, and down-wrapping). Fjdpfx Anoz E Ik Ns Hjgh Within the programs, you can also set the speed of both the film carriage and the turntable. In addition, top wraps, bottom wraps, and film overlap at the end of the pallet can be stored for each program. This allows you to save individualized programs for every packaging scheme to achieve consistently perfect wrapping results. Programs can be password protected, ensuring operators can only select from authorized settings. With a weight of 420 kg, this model is designed for loads up to 1,200 kg. Our Profiline TP features a 1650 mm turntable and can wrap pallets up to 2,500 mm in height as standard. Automatic pallet detection (via photocell) is standard, as are adjustable top and bottom wrapping cycles. If the wrapper needs to be relocated, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you are looking for a professional and robust pallet wrapper suitable for higher volumes yet requiring minimal floor space. Do you need a higher mast, film pre-stretch, or automatic film cutting? Almost anything is possible with this machine! We are happy to configure the machine as a new unit with options tailored to your requirements. About us: We believe business is made between people! A supplier delivers your ordered product – a partner does more: a partner helps you find the best solution, supports you in achieving your goals, and stands by you in the face of challenges and problems. That is our conviction. For over 40 years, now in our fourth generation, we have been the partner to small and medium-sized businesses for all matters relating to 'stretching and sealing.' Upon request, we are more than happy to advise which pallet wrapper from our portfolio best suits your requirements!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 16 300 km, pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, bendras svoris: 30 800 kg, tuščias svoris: 30 800 kg, kėlimo aukštis: 6 900 mm, pavaros būklė: 90 procentas, grandinės būklė: 90 procentas, sėdimų vietų skaičius: 1, kaušo tūris: 3 m³, pakaba: plienas, Gamybos metai: 2018, veikimo valandos: 15 999 h, Įranga: ABS, borto kompiuteris, diferencialo užraktas, galinis surinkėjas, galvos apsauga, hidraulika, kabina, oro kondicionavimas, pakreipiamas vežimėlis, papildomi žibintai, plieninės vikšrinės grandinės, žemas triukšmo lygis, Authorised SUBARU dealer in Łaziska Górne offers for sale a Japanese-made CAT 330D2L crawler excavator, complete with a set of three buckets and a ripper hook. Inspected by our mechanics, the hydraulics are fully functional with minimal play. The machine has been carefully refurbished and prepared by us for continued heavy-duty work. Fitted with 60cm wide steel tracks, MC3000 GPS for precision digging, and additionally equipped with 360-degree cameras. WE OFFER PROMOTIONALLY LOW TRANSPORT COSTS ACROSS THE ENTIRE EUROPEAN UNION WITH OUR OWN FLEET! Fedpfxozadcbs An Hegh The price includes a full set of registration documents. We offer all forms of payment: - Leasing - Loan - Cash - Bank transfer With cash or bank transfer payment you can drive the vehicle away immediately. We also provide insurance services—let us find you the best premium for any vehicle—TRY US! Additionally, we deliver paid vehicles and trucks to any specified address across Europe. For more details on our services, contact our sales representatives. Engine: Model: Caterpillar C7 Type: diesel, 6-cylinder, turbocharged, intercooler Displacement: 7.2 l Power: 204 kW (approx. 277 HP) Fuel Injection: HEUI (hydraulic-electronic unit injector) Operating parameters: - High torque at low RPM - Excellent compatibility with hydraulics - Stable operation under heavy load Advantages: - Simple and durable design - Low operating costs - No complicated exhaust emission electronics - Proven unit for heavy earthwork Hydraulic system: - Maximum operating pressure: 35 MPa - Lifting mode pressure: 38 MPa - Pump capacity: approx. 480 l/min - Rotation pressure: approx. 29.8 MPa Working forces: - Bucket digging force: approx. 179 kN - Arm digging force: approx. 126 kN Swing mechanism: - Swing speed: approx. 11.5 rpm - Swing torque: approx. 110 kNm Operating range: - Maximum digging depth: approx. 7.2 m - Maximum reach: approx. 10.7 m - Loading height: approx. 6.9 m - Maximum digging height: approx. 10 m Working equipment: - Bucket capacity: approx. 1.5–1.8 m³ - Boom length: approx. 6.15 m - Arm length: approx. 3.2 m General parameters: - Operating weight: 30,800 kg - Undercarriage: LC (Long Carriage) - Track width: approx. 600 mm Applications and main features: - High digging force and efficient hydraulic system - Simple and robust engine design without complex emission solutions - Excellent parameters for demanding earthmoving and loading operations Transport dimensions: - Transport length: 10.4 m - Transport width: 3.19 m - Transport height: 3.35 m - Undercarriage width (LC): 3.19 m - Track length on ground: 4.0 m Listed price is net and applies for export and companies. For private customers, a significant discount is possible—Contact us directly by phone for your best deal!

Būklė: naudotas, Gamybos metai: 2006, gręžimo gylis: 28 mm, Used Koch drilling and dowel insertion machine Sprint-PTP-3 Technical specifications: Workpiece dimensions: - Length Y: 110–800 mm - Width X: 20–1200 mm - Thickness Z: 14–60 mm Material: chipboard/MDF/softwood Machine with 2 working zones. 2 workpieces with a maximum width of 600 mm each can be loaded independently. Working height: 900 mm - Equipped with horizontal drilling station - Equipped with glue application and dowel insertion station - Includes 1 vibratory feeder - Vertical drilling distance Z above support table: 35 mm - Each with 1 stop ruler (left and right) - Mechanical digital displays for height adjustment - Working cycle triggered by hand button Koch Numeric with 1 NC axis (X) Positioning control via PC (Windows XP Professional PC) Including extended machine frame for max. workpiece width of 1200 mm 2 additional workpiece clamping cylinders Center stop for 4 working zones (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: - Maximum drilling depth: 28 mm - Drill holder Ø10 mm - Total drill length: 70 mm - Drill speed: 7,200 rpm Fsdpozbunkefx An Hjgh - With dowel hole blow-out Glue application and dowel insertion station: - Dowel diameter: 8 mm - Dowel length: 30 mm - Dowel protrusion: 7–14 mm (set to 11 mm) - Tolerances for wooden dowels: --- Length: +/- 1 mm --- Diameter: +0.1/-0.2 mm With electronic glue monitoring ELC: A monitoring device is mounted before the glue valve, which measures the glue flow at every work cycle. If a valve does not dispense glue, the machine will interrupt the cycle and indicate the affected glue valve in the control cabinet. Electrical data: - Connected load: 400V, 50 Hz, 3 phases - Voltage tolerance: max. +6% to –10% Air supply: - 1 x R 1/2" internal thread - 7 bar Extraction air velocity: approx. 30 m/sec

Būklė: naujas, Cutting diameter round: 900 mm Fgodpfx Asfg E Hpjn Hoh Cutting diameter square: 900 mm Cutting capacity flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions (L x W x H): 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance when cutting specialty steels. • The electro-welded machine frame and the steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw bow, vice, feed, saw band guides) operate via state-of-the-art linear guides with high static and dynamic load capacity, ensuring minimal sliding friction. • Another distinguishing feature is the material positioning rollers, which are hydraulically driven. They move perpendicular to the material, allowing for optimal clamping. • Thanks to height control of the saw blade position, the operator can set the band close to the material's top edge. After cutting, the band automatically returns to its previous position. Alternatively, the band can remain in the lower position. During the cutting cycle, the software compares the cutting load with preset values, enabling the sawing process to stop in case of anomalies. • The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly quiet operation at a constant pressure. • Precision-ground carbide inserts clamp the saw blade, complete with lateral hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw blade is tensioned via a hydraulic cylinder controlled by the machine software. The tension is automatically released after a specified time when the machine is idle or when a cycle has finished. • CNC-controlled automatic versions are available in the X-TECH 900 / 1200 models, featuring a 500 mm feeding length for high-production applications. • The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, ensuring precise positioning even at maximum load. • All guided movements are handled by four recirculating ball linear guides with high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Būklė: naujas, Cutting diameter round: approx. 355 mm Cutting diameter square: 350 x 350 mm Saw blade length: 4640 x 34 x 1.1 mm Fgodpfx Aofg E Hzen Heh Table height: mm Band speed: 15 - 115 m/min Total connected load: 4.0 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.1 x 2.2 x 2.2 m Shark 350 NC HS 5.0, fully automatic hydraulic bandsaw machine in dual-column construction for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Standard equipment includes: + Powered chip conveyor, installable on the right or left side of the machine. + Adjustable clamping pressure of the vices. + Feed conveyor with vertical rollers for lateral material support. + Numerically controlled bandsaw machine which can also be operated in semi-automatic mode, equipped with the new MEP 50 control system, specifically developed by MEP for automatic machines, based on Windows CE. + "Clean Cut" cycle: the feeder retracts the workpiece to prevent scoring on the cut surface when the band returns to the top at the end of the cut. + Fieldbus communication system with dual microprocessor and serial connection. + User interface with 7" touch screen display and mechanical buttons for machine operations, ensuring reliable, simple, and intuitive operation as well as real-time monitoring of all cutting parameters.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 100 kg, bendras aukštis: 1 660 mm, Gamybos metai: 2026, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, Laser for Product Marking – The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, laser marking has become indispensable for permanent identification. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after presetting. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber Laser 20W (Optional: 30W, 50W) • Wavelength: 1064nm • Marking field size: 150x150mm (Optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) Fjdpfezpwmdex An Hsgh • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Tower signal light to display operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profiles • 230V power connection • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 45 kg, bendras ilgis: 350 mm, bendras plotis: 605 mm, bendras aukštis: 1 080 mm, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 70 mm, nuskaitymo srities plotis: 70 mm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The mobile LAS 23 portable laser stands out for its compact design. Small, handy, and equipped with custom attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base, it can be moved directly to the workpieces to be marked. This makes it suitable for both large and heavy, as well as small workpieces. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setup. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. Fsdpfx Aozxcfkjn Hsgh Made in Germany • Fiber laser, 20W (optional: 30 Watt, 50 Watt) • Laser Class 1 • CE compliant, according to EU directives • Wavelength: 1064nm • Marking area: 70x70mm (optional: 110x110mm) • Signal light to indicate operating status (on the hand unit) • Marking software: EZCAD • 230V connection • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 45 kg • Weight of portable laser unit (hand unit): 2.8 kg • Fiber optic cable: approx. 2.50 m • Integrated extraction system

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, greitas poslinkis Y ašis: 20 m/min, veleno greitis (maks.): 60 000 aps./min, tvirtinimo skersmuo: 3 mm, bendras plotis: 800 mm, įvesties srovės tipas: Oro kondicionierius, stalo ilgis: 320 mm, stalo aukštis: 560 mm, garantijos trukmė: 12 mėnesiai, darbinis plotis: 560 mm, aplinkos temperatūra (min.): 18 °C, aplinkos temperatūra (maks.): 30 °C, suslėgto oro jungtis: 6 juosta, darbinis ilgis: 320 mm, ašių skaičius: 3, The compact LOW MINI tabletop version has been specially developed for depaneling small-format series, small batches of large-format boards, and cost-conscious production. PCB materials with residual web connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled across all axes, with the milling drive positioned from above. The highlight of this machine is the effortless and straightforward change of the working area from small (320x280mm) to large (320x560mm) formats. • Short cycle times due to shuttle operation • X/Y axes with linear motor technology • Panel fixation using pin technology • Flexible handling • PCBs with residual web connections • Milling spindle adjustment via servo technology • Extraction unit • Easy operation • Excellent price-performance ratio Fgjdpfx Ansxmfdxe Hjh Manual depaneling – flexible and cost-effective The concept of manual depaneling offers substantial benefits in terms of flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard features include dual loading with linear motor technology; for extended work area, single-shuttle operation is available. The user-friendly maintenance and operation, in combination with the outstanding price-performance ratio, make work convenient and the investment in this depaneling system economically attractive. Axis speed: 160 mm/s Repeatability: 0.02 mm Separation accuracy: 0.1 mm Shank tool: 0.8 – 2.4 mm

Gamybos metai: 2026, būklė: naujas, Josan PVC Mill 500 We also offer leasing and financing options. Feel free to ask us! ‼️Net price only €18,999‼️ With our complete system, as shown in the picture, you can finely mill your plastic materials and feed them directly into the recycling process. Of course, we also have pre-shredders, crushers, and a full range of other plastic recycling machines. Whether you are a large enterprise, SME, or small business, our expertise enables us to meet your specific recycling needs with our machinery! We keep demonstration machines in stock at our location in Heilbronn for on-site viewing! From copper granulation systems, shredders, electrostatic separators (you can, for example, separate sand from plastic, copper from plastic, various types of plastics, etc., and thus immediately reuse the purified material). Simply ask us. We produce systems tailored to your needs. We must note that our English is not perfect. You are also welcome to communicate with us in Swabian dialect! Josan PVC Mill 500: ▶️ Throughput approx. 200 kg/h ▶️ Power 37 kW ▶️ 24 rotating and 13 fixed blades made from extra-tough special steel alloy ▶️ Complete as shown in the picture, all-inclusive Fgjdpoqvmn Njfx An Hoh ▶️ Weight approx. 1,200 kg Net price €18,999.00 +19% VAT €3,609.81 Gross price €22,608.81 Errors excepted. Pictures/descriptions may vary.

Gamybos metai: 2026, būklė: naujas, We also offer leasing and financing options. Feel free to contact us! For all types of recycling, we keep shredders and various recycling machines in stock at our Heilbronn location! From copper recycling to plastic recycling, you can purchase all the necessary machines from us. Just ask us for details. Fgjdsqvmpfjpfx An Heh With Josan & Söhne Maschinenbau — maximize your copper recovery! ‼️We are happy to demonstrate the machines to you in person in Heilbronn! By appointment only‼️ We are a German company based in Heilbronn: German regulations, warranty, and service! We also speak English! We are happy to advise you on any recycling-related questions! Material separation within the recycling sector — just ask. Electrostatic separator for separating plastics, synthetics from copper, iron, or other materials. It can also separate plastics from metals in plastic window profiles. Efficient separation of plastics from sand or different types of plastics. ➡️Motor: 6.59 kW ➡️Dimensions (L x W x H): 4000 x 1400 x 3000 mm ➡️Weight: approx. 1000 kg ➡️Capacity: 150–300 kg per hour Price on request! Errors excepted. Images/price/specifications may vary.

Būklė: naudotas, Gamybos metai: 2021, Flatbed cutter Elitron TH 31.20 for sale. Year of production: 2021 Two carriage configuration for more productivity. Working area: 3150x2050 mm.; Working speed up to 102 m./min.; Two independent cutting heads for material up to 50 mm.; Working area divided into 40 individual vacuum sectors; Highly efficient 11 kW vacuum pump incorporated into the system structure; Monolite frame Axis motion uses linear rolling bearings, precision rack and pinion mechanism; Configuration: One electric oscillating knife module; One pneumatic oscillating knife cutting module; Two tangential modules; Two creasing modules; One 3kw milling module (60.000 rpm) Two laser pointer tools; Two marking tools; External vacuum cleaner for milling (3,45kW); Seeker system PRO; Video projection system on table; Twin-Cut software to optimize the workload of the two cutting heads to maximize the performance and yield. Fgsdew Duchjpfx An Hsh Elitron flatbed cutter installed in our demo room. You are welcome for machine inspection and testing. For additional fee we can make installation and training.

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €11,800 Leasing rate: €226.56 Shaft diameter: 60 mm Top roller diameter: 215 mm Bottom roller diameter: 215 mm Driven rollers: 3 Motor power: 1.5 kW Speed: 4 m/min Flat bar upright (cross-section / min. diameter): 80x20 mm / 1200 mm; 40x10 mm ... Flat bar flat (cross-section / min. diameter): 120x25 mm / 600 mm; 50x... Square bar (cross-section / min. diameter): 50x50 mm / 800 mm; 20x20 mm ... Round bar (cross-section / min. diameter): Ø 50 mm / 800 mm; Ø 20 mm ... Tube (cross-section / min. diameter): Ø 100x2 mm / 1600 mm; Ø 6 ... Rectangular tube upright (cross-section / min. diameter): 80x40x3 mm / 1400 mm; 40x... Rectangular tube square (cross-section / min. diameter): 70x3 mm / 1600 mm; 40x2 mm ... Angle iron leg outside (cross-section / min. diameter): 70x70x7 mm / 1000 mm; 40x... Angle iron leg inside (cross-section / min. diameter): 70x70x7 mm / 1200 mm; 40x... Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the upper roller Hardened universal rollers Side straightening rollers adjustable on one axis manually Can be used horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment comply with CE regulations Operating manual available in GERMAN and ENGLISH Fodewiq S Nspfx An Hsgh

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €57,920 Leasing rate: €1,094.69 Pressing force: 60 t Bending length: 2,050 mm Axes: 3 (Y1, Y2, X) Stroke: 265 mm Distance between uprights: 1,700 mm Throat depth in side frame: 450 mm Installation height: 530 mm Drive system: hydraulic Rapid traverse Y-axis: 200 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 110 mm/s Backgauge travel range X-axis: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge speed R-axis: 350 mm/s Backgauge travel range R-axis: 250 mm Table height: 900 mm Table width: 104 mm Oil tank: 100 l Motor: 7.5 kW Length: 3,200 mm Width: 1,550 mm Height: 2,850 mm Weight: 5,600 kg Backgauge: 650 mm 3 Axes (Y1, Y2, X) CNC CONTROL DT-15 - 2D graphic display 15" - Intuitive touch-screen operation (easy contour drawing by finger) - User-friendly dialog programming - Automatic bend sequence calculation - Automatic calculation of flat length for sheet blank - Graphical product and tool memory - Correction possibility - USB ports for backup and program transfer - PC software: Programs can be written on PC and transferred to the machine via USB Servo-driven backgauge on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Laser safety device Fiessler AKAS mounted on upper beam Sheet support arms on linear guides Equipment in compliance with CE regulations Filled with oil Operating manual in GERMAN or ENGLISH ADVANTAGES OF THE AD-S SERIES: - Increased stroke, installation height, and throat depth - Higher approach and return speed of the upper beam - Higher backgauge speed - Backgauge fingers on double instead of single linear guides - More options available, such as additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls … OPTIONS: Fgsdpfx Answirivj Hsh R-axis R/Z1/Z2 axes DBend, 3D CAD/CAM import and simulation software (step, iges, and dxf file import) CNC control SKY22 CNC control Delem DA66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import capability Quick-clamping levers for the upper tool

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €20,400 Leasing rate: €391.68 Shaft diameter: 80 mm Roller diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min Flat bar upright (section / min. diameter): 100x20 mm / 2000 mm; 80x20 mm Flat bar flat (section / min. diameter): 125x25 mm / 600 mm; 60x5 mm Square steel (section / min. diameter): 45x45 mm / 500 mm; 15x15 mm Round steel (section / min. diameter): Ø 50 mm / 500 mm; Ø 15 mm Pipe (section / min. diameter): Ø 100x2.5 mm / 1,200 mm Rectangular tube upright (section / min. diameter): 80x25x3 mm / 800 mm; 25x1 mm Square tube (section / min. diameter): 70x70x3 mm / 1,300 mm; 25x25x2 mm Angle iron, leg outward (section / min. diameter): 80x80x8 mm / 800 mm; 30x3 mm Fgjdpfx Ajwirvvjn Hoh Angle iron, leg inward (section / min. diameter): 70x70x7 mm / 700 mm; 30x3 mm UPN, leg outward (section / min. diameter): UPN 140 / 1,600 mm; UPN 120 UPN, leg inward (section / min. diameter): UPN 140 / 1,600 mm; UPN 120 IPN lying flat (section / min. diameter): IPN 120 / 600 mm; IPN 80 Length: 1,450 mm Width: 1,000 mm Height: 1,400 mm Weight: 1,700 kg 3 motor-driven rollers Robust steel welded construction Hydraulic adjustment of both lower rollers Digital display of lower roller positions on a separate control console Side straightening rollers adjustable along 3 axes Can be used horizontally and vertically Forward and reverse operation Machine and equipment compliant with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Būklė: geras (naudotas), Gamybos metai: 1995, max. cutting length: 3050 mm Material thickness 37 kg/mm²: 12 mm Fedpfx Asvkw Dvsn Hogh Material thickness 70 kg/mm²: 8 mm Cutting angle: 1.8 degrees Strokes per minute: 8 - 13 min⁻¹ Number of hold-downs: 12 Drive power: 18.5 kW Dimensions (L x W x H): 4150 x 1950 x 1950 mm Weight: 8000 kg Equipment / Special Features: • Motorized NC back gauge control, ELGO type 71, length approx. 900 mm • On demand, thanks to the toggle lever system, the machine can operate with just one cylinder at approx. 55% of nominal capacity for reduced cutting performance. This increases the cutting sequence for more efficient thin sheet processing. Switching from fast to slow is done via a selector switch on the control panel. • Hydro-mechanical drive via robust toggle lever • Easy blade gap adjustment on both sides • 2 cylinders mounted externally on the machine for easy access • Vertical, stable guides • Upper and lower blades with four cutting edges each • Hydraulic overload protection • Hold-down force is proportional • Machine frame is a complete welded construction and is machined in one single set-up (no bolted parts) • Portable electric foot switch • Blades suitable for mild steel and stainless steel • Ball rollers in table • 1 angle stop • 1 support arm • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 281008, Offered is a fully automatic rotary capping machine by ALWID, model FAVORIT 12SK. Machine details: - Stainless steel construction (frame, housing, etc.) - Fully automatic cap sorting and feeding - 12 capping heads with magnetic clutch and adjustable torque - Suitable for integration into production lines - Capacity: 2,000 – 24,000 bottles/hour - Bottle height: 90 – 300 mm Fgjdpstlrlxofx An Hsh - Suitable for plastic screw caps (only one format available) The machine has only been used for processing plastic bottles with plastic screw caps. Currently, the machine is not in operation and can be inspected at the production site in Thuringia by appointment. The machine layout including dimensions is attached as a PDF document.