Benalu Agriliner Bulkliner 91 Sofort Lieferbar pirkti naudotą (2 168)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Ex-display unit – new Available at a special price Technical Data 300-P Ljdpfxjcdrzds Akvohh Inlet diameter: 300 mm Motor rated power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Rated air flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Location: Ex-stock Bitburg Subject to prior sale

Būklė: naujas, Gamybos metai: 2025, Schneider Compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Factory-equipped with all safety fittings, electric connection cable with plug, and Condor pressure switch Compressed air tank fitted with safety valve, tank pressure gauge, and condensate drain valve The welded rear handle improves loading and transportability Fully automatic operation via pressure switch with start-up relief, motor protection, and on/off switch High-end equipment for universal applications With V-belt drive, 2 inline cylinders for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – for gentle operation of compressor components, reduced noise level and minimized vibrations Large cooling fan wheel for optimal cooling Includes filter pressure reducer for regulated compressed air cleaned of condensate, dirt, and oil With 2 m device cable with rubber sheath and air outlet via quick coupling Device supply cable with phase inverter 10-year warranty on tank against corrosion-through Lhedebyhvropfx Akvsh Technical data Pressure: 10 bar Intake capacity: 510 l/min Filling capacity: 390 l/min Speed: 1240 rpm Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: Ex stock Bitburg Subject to prior sale

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Lodpji Am U Defx Akvehh F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, ST 3 classic F 23 – Combined Saw and Spindle Moulding Machine With tilting saw blade, tilting spindle moulder, and anodized aluminium sliding table Robust steel and grey cast iron construction Large support surface and precise cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large outrigger (900 x 600 mm) with extendable aluminium telescopic fence Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°–45° Rip fence with fine adjustment Stable saw unit and large double-trunnion spindle moulder aggregate ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-relieved cast iron Three spindle speeds, manually adjustable from 3,500 to 10,000 rpm Spindle with reversible rotation direction Standard curved milling guard Two 5.0 kW motors with high power reserves Grey Cast Iron Spindle Moulder Unit Top-mounted on both sides Top precision ball bearings Close to pivot point Four optimally graded spindle speeds, allowing for trimming of workpieces Powerful Motors Industrial motor, 100% duty cycle suitable for continuous operation (full load) Scope of delivery: Curved milling guard Anodized aluminium format sliding table Aluminium fence jaws Folding stops Technical Data Cast iron working table dimensions: 1112 x 430 mm Cutting length: 2250 mm Max. saw blade diameter with/without scorer: 315 mm Max. cutting height at 90°/45°: 100/70 mm Max. crosscutting width: 2660 mm Saw blade tilting: 90°–45° Cutting width: 900 mm Speed: 4000 rpm Spindle moulder: – Spindle tilt: 90°–45° Usable spindle length: 100 mm Max. tool diameter: 210 mm Max. tenoning tool diameter: 275 mm Max. retractable tool diameter: 180 mm Speeds: 3,500/7,000/10,000 rpm General: – Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) Weight: 470 kg Extraction port diameter: 2 x 120 mm Ledpfscnwydex Akvohh Extraction port diameter saw blade guard: 60 mm Location: Ex stock 54634 Bitburg – Available immediately –

Gamybos metai: 2026, būklė: naujas, Vakuuminė membraninė presas VPR-4000 yra universali presas, skirta medienos apdirbimui ir termoformavimui. VPR-4000 presas taip pat yra pasukamas ir mobilus. Naudojimo sritys: Faneravimas / formų klijavimas / apvyniojimas... Įvairių profilių padengimas (fanera, popierius, plastikas...) Medienos lankstymas: lenktų ir sluoksniuotų elementų gamyba Vakuuminė sistema: darbinis paviršius su vakuumo kanalais užtikrina tolygų slėgio sumažinimą net ir dideliems ruošiniams. Becker vakuuminis siurblys / be alyvos / bako tūris 100 l Darbinio paviršiaus matmenys: 4000 x 1500 mm Lhedpfx Akeyr R Hwsveh Variklio galia: 0,75 kW Vakuuminio siurblio našumas: 40 m3/h Kaučiukinė membrana Išoriniai matmenys: 4100 x 1650 x 1000 mm Svoris: 400 kg Vieta: iš sandėlio 54634 Bitburg - laisvai pakraunama -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Al-Ko clean air dust extractor Ex-demonstration unit Offered at a special price Technical data Power Unit 250 P Inlet diameter: 250 mm Motor rated power: 6.5 kW / 3 phase Voltage: 400 V / 50 Hz Maximum air flow rate: 4900 m³/h Nominal air flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L x W x H) in mm: 2305 x 994 x 2351 Weight: 758 kg Lhsdpocdr Ensfx Akvoh Location: 54634 Bitburg warehouse Subject to prior sale

Būklė: naujas, Gamybos metai: 2026, Small format circular saw with tiltable saw blade and high-quality sliding table made from anodized aluminium. Cutting plane of the small format circular saw directly on the rolling table. Precision-guided aluminium sliding table, anodized as standard. Large table extension mounted on a telescopic arm and longitudinally adjustable. Standard table extension and table widening make it easy to process larger workpieces. The large-sized saw unit, made from grey cast iron, is mounted twice on the cast iron table, ensuring stability, precision, smooth operation, and long service life. Large work table made from precision-ground grey cast iron—extremely robust and resistant to wear. Smooth running and highly accurate cuts. Aluminium sliding table Equipped with a tried-and-tested ball-contact system, used millions of times. Dust- and dirt-resistant thanks to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence Extendable aluminium telescopic fence, angle-adjustable, with two professional flip stops. Rip fence Standard with fine adjustment and quick lock. Scope of delivery: Table extension Table widening Anodized aluminium sliding table Rip fence with round bar guide and fine adjustment Model SC 2 classic Art. no. 5504215 Technical specifications Table dimensions 1020 x 325 mm Table height 900 mm Cutting length 1660 mm Max. cutting height at 90° with scoring unit 100 mm Max. cutting height at 45° with scoring unit 79 mm Max. crosscutting width left of saw blade 1270 mm Cutting width with rip fence 900 mm Saw blade tilt 90° - 45° Max. saw blade Ø with scoring unit 315 mm Max. saw blade Ø without scoring unit 315 mm Scoring saw blade Ø (option) 80 mm Lhodpjcnxamofx Akvjh Main saw blade speed 4000 rpm Scoring saw blade speed 7600 rpm Electrical connection 400 V / 50 Hz Motor power 4.0 kW Extraction port diameter 120 mm Saw blade guard extraction port diameter 60 mm Weight 295 kg Location: From stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder and anodised aluminium sliding table Robust steel and cast iron construction Large supporting surface and precise cast iron table High-precision format sliding table made of anodised aluminium (travel 2250 mm) Large crosscut frame (900 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm, fitted with professional flip-over stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° to 45° Rip fence with fine adjustment Stable saw unit and large double trunnion spindle moulder unit for maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-relieved cast iron Three manually adjustable spindle speeds, 3500-10000 rpm Spindle moulder with right/left rotation Standard supplied hood guard for curved work Safety reversing aluminium fence jaws Two powerful motors with high power reserves Two plug-in handwheels for quick and convenient operation Dimensions and Weights Weight approx. 470 kg Extraction Connection Extraction nozzle diameter: 2 x 120 mm Extraction nozzle diameter (saw blade guard): 60 mm Electrical Data Drive motor power: 2 x 5.0 kW Connection voltage: 400 V Network frequency: 50 Hz Spindle Moulder Spindle tilt: 0 to -45° Usable spindle length: 100 mm Spindle speeds: 3500/7000/10000 rpm Max. cutter diameter non-retractable: 210 mm retractable: 180 mm Tenoning: 275 mm Circular Saw Unit Crosscut length: 1600 mm Cutting width with rip fence: 900 mm Max. crosscut width left of blade: 2660 mm Saw blade tilt: 90-45° Max. cutting height 90°: 90 mm Max. cutting height 45°: 63 mm Max. saw blade projection 90°: 100 mm Max. saw blade projection 45°: 78 mm (Main) saw blade diameter: 315 mm (Main) saw blade diameter explained: independent of scorer (Main) saw blade speed: 4000 rpm Sliding Table and Table Table length: 1112 mm Table width: 430 mm Lodpfx Ashp Rdlokvohh Scope of delivery: Hood guard for curved work Anodised aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Technical data: Suction capacity: 510 l/min Filling capacity: 400 l/min Max. pressure: 10 bar Tank capacity: 90 l Cylinders/stages: 2/1 Speed: 1,300 rpm Motor power: 3 kW / 400 V Description: The universal model with belt drive and high-quality features, especially suitable for craftsmen. Ideal for use where air quality, durability, and efficiency are essential. - Long service life thanks to high-performance units with low speed - Safe transport and excellent stability due to large wheels with parking brake - Optimum cooling provided by large fan wheel - Aftercooler with cooling fins ensures low tank entry temperature, resulting in less moisture in the compressed air - Improved efficiency through optimized units Standard equipment includes: - Condor pressure switch - Pressure gauge - Pressure regulator with water separator and Rectus quick coupling - Motor with overload protection Location: In stock, 54634 Bitburg Lhsdpfx Ashk Dfkokvsh - Immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Low-noise and Slow-speed Shredder WL 4/18.5 kW Technical Data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper volume: approx. 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Number of knives: 28 pcs Knives: 40 x 40 mm concave Screen perforation: 15/20 mm Incl.: Control cabinet Electrical control unit Star-delta starter Lhodpfx Aobtnftjkvoh Rubber vibration dampers Second knife row Log spacer (self-cleaning hopper) Top equipment configuration Location: Ex stock Bitburg – immediately available – at special price

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Low-noise and slow-speed shredder WL 4/18.5 kW Technical Data: - Hopper opening: 600 x 800 mm - Hopper opening with logspacer: 600 x 1050 mm - Hopper volume: approx. 0.6 m³ - Working width of rotor: 600 mm - Rotor diameter: 252 mm - Number of knives: 28 pcs - Knives: 40 x 40 mm concave - Screen perforation: 15/20 mm Includes: - Control cabinet - Electrical control system - Star-delta starting - Rubber vibration elements - Second knife row - Logspacer (free-cutting hopper) Location: 54634 Bitburg Lodobunq Hjpfx Akvjhh Available immediately

Būklė: naujas, Gamybos metai: 2026, Pneumatic Double Diaphragm Pump Cobra 40-10 Its unique design enables low-pulsation operation Consistent material flow for perfect spray pattern and superior surface quality Ideally suited for processing shear- and moisture-sensitive materials Minimal shear forces – perfect for processing, e.g., UV coatings Ideal for handling small material quantities and frequent color changes Ljdpobuqn Hofx Akvjhh Scope of delivery: Base unit on frame, 7.5m high-pressure twin hose, 5L upper container Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Translation ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Special price – available immediately

Būklė: naujas, Gamybos metai: 2026, Holzkraft Band Saw HBS 533 S. Heavy-duty professional version with high dead weight for maximum running smoothness Exceptionally smooth and precise operation thanks to a torsion-resistant machine housing Large-sized cast iron saw table made from a single piece, tiltable from 0° to +20°, ground and polished surface Patented table tilting device with handwheel and rack-and-pinion Quick-release saw blade tensioning Ceramic blade roller guides Large cast-iron parallel fence Fast and precise cutting height adjustment via handwheel and rack, with millimeter scale Safety switch for automatic shut-off when opening the door Large cast-iron parallel fence Supplied as standard with mitre gauge Cast iron flywheels with special coating on running surfaces Viewing window for checking the saw blade tracking Professional saw table guidance The heavy, solid cast iron saw table is easily and conveniently adjusted via a handwheel and rack-and-pinion guidance Infinitely variable tilt from 0° to +20° Patented Work table dimensions 750 x 530 mm Cutting speed 1400 m/min. Flywheel diameter 530 mm Maximum cutting height 350 mm Maximum cutting width with fence 465 mm Maximum cutting width without fence 510 mm Bandsaw blade length 4190 mm Precision blade guide Top / bottom Saw table tilt 0° - +45° Motor power 400 V/50 Hz/P2 4.0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Extraction port diameter 2 x 100 mm Lodpfx Asb S Uzkekvehh Location: Ex stock Bitburg

Būklė: naujas, Gamybos metai: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. material passage height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Application roller diameter: 250 mm Motor power: 3 kW Electrical connection: 400 V / 50 Hz / 3-phase Ljdpfou I R Utox Akvshh Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea formaldehyde (UF), and polyurethane adhesives, suitable for various material types such as MDF, multiplex, chipboard, composite panels, and gypsum plasterboards. This type of glue application machine allows precise and homogeneous dosing of adhesive, taking into account the roller profile, which must suit the production requirements. The heavy-duty frame and the core of the rollers—which are manufactured thicker than previous models—allow for a high production rate without special issues, enabling bonding of workpieces up to 2,200 mm in width. Roller removal for maintenance is straightforward due to the support system, which can be split in half via a simple bayonet coupling. The machine can be optionally equipped with various accessories such as an electronic speed controller, automatic roller cleaning device, and automatic upper roller lifting system with digital position display. The S4R/P glue application machine is suitable for various production purposes, including in the construction sector and for manufacturing foam panels and mattresses. Features: - Automatic roller cleaning system - Infeed roller - Outfeed roller - Working height: 900 mm - Infeed table TRF 1400 x 3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400 x 3000 mm, disc rollers, Ø 122 mm, stainless steel Location: Available ex-stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2024, The Uniq series is the fully-fledged foundation of our range and shares all the features that have established the Kündig edge sanding machine’s reputation in the market as a robust, versatile precision instrument. A key element of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90 mm and the ability to tilt motor-driven up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The core of all our edge sanders is the sanding aggregate, which offers a range of intelligent functions and features. Unlike many machines, our sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. Oscillation stroke and range are set easily at the touch of a button. Thanks to flexible adjustment and the large oscillation travel, sanding belts can be fully utilized across their entire width—without laboriously adjusting the table height. The oscillation mechanism is powered by a separate motor. The sanding aggregate can also be tilted easily using a rotary switch, also motor-driven. The unit can be inclined between 90° and 45°. Thanks to the well-designed swivel mechanism, full oscillation is always available and double-sided sanding is possible—even simultaneously. The differing table heights of the front and rear sanding stations also ensure that the belt is not used at the same height simultaneously. Furthermore, the combination of swivel mechanism and differing table heights ensures that the gap between sanding aggregate and worktable is minimized at every angle setting. Belt change is simple and accomplished in seconds. The Four Sanding Stations 1st Station: "Veneer Side" The front station is designed for precise calibration of materials and operates like a jointer-planer. The infeed fence is adjusted by a rotary knob to set material removal to tenths of a millimeter. Importantly, the fence remains parallel; it does not tilt. Infeed fence, sanding pad, and outfeed fence are always parallel, eliminating the possibility of rounding workpieces. Fine adjustment of the sanding pad for grit compensation or zeroing between fence and pad is possible via handwheel. The heavy-duty worktable on this side is fitted with sliding inserts. 2nd Station: "Solid Wood Side" Lhodpfx Aefig Rwekvsh This station is ideal for sanding flat, angled, beveled, or outwardly curved workpieces. As with the other stations, the entire sanding aggregate oscillates. The belt runs over a graphite surface for cooling across the full width. A mitre fence is also provided on the solid wood side. Included Accessories: - Half-round table - Auxiliary table with sanding rollers Location: In stock at 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2024, Panhans Tilting Spindle Moulder Type: 245/20 Lhedpfx Aer Ig H Tokvoh Solid German engineering Table-mounted moulder with single-sided, fixed spindle for tilting range from -5° to +45.5° Positioning control for spindle height and tilt adjustment, including zero reset for height and offset travel Electronic position and speed displays 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-action belt tensioning device Push-buttons for spindle start and stop Left and right rotation Quick-release spindle clamp Finely planed grey cast iron table with fixed frame support Control panel mounted below on fixed frame support Fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip breakers Integrated machine socket Lockable main switch Mechanical motor brake Moulder guard and pressure device GAMMA V 1629 Curve milling fence 1639 Tapoa Milling spindle 30 mm, non-interchangeable CE compliant GS certified Table size 1100 x 760 mm Table height 870 mm Spindle: Non-interchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Extraction ports 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light grey and RAL 5000 Violet blue Net weight approx. 800 kg Equipment: Upper control panel Tilting ±45 degrees 7.5 kW motor Centrex Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Planer-thicknesser Minimax FS 41es TERSA Maximum equipment for professionals. Article number: 5503431 Brand: Holzkraft / SCM Helical-toothed steel feed roller for consistent and even material feed, allowing planing from as little as 0.2 mm chip removal (at minimum workpiece thickness of 3 mm) – ideal for economical planing of precious hardwoods. Models with TERSA cutterblock enable blade changes within seconds and operate with particularly low noise. Material feed with two speeds. Extra-long planer tables for easy and precise alignment of workpieces. Tables made from cast iron, annealed and stress-free for durability and long-term flatness. Simultaneously opening, rear-hinged jointer tables for short setup times. Thickness table adjustment via handwheel with digital height display. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product): Approx. 2200 mm Width/depth (product): Approx. 1160 mm Height (working): 905 mm Net weight: Approx. 450 kg Jointer Total table length: 2200 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Max. jointer cutting depth: 5 mm Dust extraction Thicknessing extraction port diameter: 1 x 120 mm Thicknesser Table length: 775 mm Working height max.: 240 mm Table width: 410 mm Max. thicknessing cutting depth: 5 mm Min. working height: 3 mm Electrical Data Main drive motor power: 5 kW Mains frequency: 50 Hz Operating voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5000 rpm Cutterblock diameter: 95 mm Maximum planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min Lhjdpfx Aslht Htjkveh SCOPE OF DELIVERY Jointer fence with round rod guide & auxiliary fence Two feed speeds TERSA cutterblock Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2026, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Lsdpfx Akelht H Eovshh Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Location: 54634 Bitburg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser machine Holzkraft FS 30 Classic Tersa Equipped with Tersa cutter block and quick-change planer blade system The Tersa planer blade system enables blade changes in seconds and ensures exceptionally quiet operation. Helically-toothed steel feed roller for continuous and consistent wood feed Extra-long planer tables Large planer fence remains in place when opening the planer tables Planer tables open towards the rear High machine weight Lhodpfxobuldyj Akvoh Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thickness table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutter block, anodized planer fence Available ex-stock Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The outstanding advantages: Space-saving compact design – comfortable and powerful. Excellent surface quality and a pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture window through air guide plates – suitable for larger workpieces as well. Separation efficiency of overspray up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in long filter service life! Simple and quick filter replacement from the front. Cost-effective replacement filters. Low acquisition cost and extremely low energy consumption. Dry spray booth made from galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter, and fiberglass filter as secondary filter unit. Ex-proof fan with throttle valve mounted on the left. Do not compromise on surface quality. Easy Paint extraction walls are the ideal, economical solution for effective capture and filtration of paint mist as well as extraction of solvent vapors. Robust and powerful yet economical in use. With the IPE double filtration system, two filter stages ensure a maximum separation efficiency of up to 99%. The cardboard labyrinth filter initially captures significantly more overspray (up to 18 kg/m² of filter area) than conventional filter mats due to its folded filter pockets. The downstream fiberglass secondary filter captures only the finest residual particles. As a guideline, depending on the type of paint used, the cardboard labyrinth filter has a service life of approximately 150 to 200 spraying hours. The fiberglass filter only needs to be replaced after about 900 to 1200 spraying hours, which corresponds to every 5th or 6th cardboard filter change. Easy Paint also features a lower intake opening to quickly and safely capture solvent vapors at floor level or from recessed work pits. Thanks to this additional lower intake, Easy Paint can also be connected to a floor pit or floor tray for sub-floor extraction. The front-insert filter cassette also makes filter changes easy in this configuration. Standard extraction capacity Easy Paint 7000 Article no. 600027 Airflow at standard delivery * 7000 m³/h Lsdpodqc U Hefx Akvehh Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Extraction duct connection D = 355 mm Width in mm 2845 Total height in mm 1955 Depth in mm with collection window 1015 Weight in kg 180 Location: Available from stock in Bitburg Demo machine at a special price

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, minimax c 26g TERSA – Multi-function Combination Machine for Sawing, Milling, Planing and Thicknessing. The work tables, made from heavily ribbed cast iron, and the welded steel frame ensure torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer head with TERSA quick-change system with three planer knives. Helically geared steel feed roller ensures consistent workpiece infeed during thicknessing. Adjustable curve milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality made in Europe. Equipment Details Ljdpfxjdqzh Tj Akvjhh Aluminium Sliding Table Proven ball contact system, used millions of times. Dust- and dirt-resistant due to minimal contact point between ball and guide rail. Permanently smooth operation. Saw Unit Adjustment Manual height and tilt adjustment of the saw assembly via star handle. Precise positioning using a scale. TERSA Planer Shaft No more adjustment or screwing needed. Planer knife changes in seconds. Self-locking. Extremely quiet operation. Spindle Moulder The milling unit offers two speeds for flexible use of tooling. The machine includes a finely adjustable curve milling guard for profiling. Tenoning operations can be performed effortlessly using the aluminium sliding table. Thickness Planer The powerful thickness feed allows planing of workpieces up to 200 mm high. The helical feed roller guarantees constant infeed. The jointer table folds space-savingly towards the inside of the machine. Conversion from surface planer to thickness planer takes only a second with a single movement. Surface Planer Standard with TERSA quick-change planing knife system. Large-dimensioned jointer tables. The tables, made of cast iron, ensure ultimate quiet running and freedom from vibration. Saw Unit Saw tiltable up to 45°. With 250 mm Ø saw blade, max. cutting height of 80 mm. The parallel fence enables cutting up to 500 mm width. Table Extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces. Scope of Delivery: TERSA quick-change planer cutterblock Anodised aluminium sliding table Mitre fence with flip stop Multi-purpose fence for parallel cuts and surface planing Eccentric hold-down clamp Model minimax c 26g TERSA Article No. 5500027 Ripping length 1200 mm Cutting width with parallel fence 500 mm Max. crosscut width left of saw blade 1200 mm Saw blade tilt 90 – 45 degrees Max. cutting height at 90° 80 mm Sliding table length 1140 mm Sliding table width 201 mm Sliding table height 70 mm Saw table length 1024 mm Saw table width 224 mm Saw table height 900 mm Planer shaft type TERSA Planer shaft diameter 62 mm Number of planer knives 3 pcs Jointer table width 260 mm Jointer table length 1040 mm Tilt angle of saw/jointer fence 90/45 degrees Maximum planing depth 3 mm Thickness table length 450 mm Thickness table width 260 mm Minimum working height 3 mm Location: In stock at 54634 Bitburg - Immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, - NEW - Make: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Complete in standard configuration with: Ljdpfxsdwi Rke Akvjhh - Fully automatic electronic control system with program selection switch: FLUSHING – GLUING – GLUING/DRIVING-IN - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle, suitable for glues with a viscosity of 150 to 350 mPas - Stepless electronic glue quantity adjustment with potentiometer, controlled by timer through the electronic control system - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function key (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collection container) - Control lamp for remaining glue indicator in the glue container - 1 stainless steel container for 5 kg glue and 1 stainless steel container for 5 l water for flushing/cleaning - 4 casters for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25 - 40 mm, driving-in depth 7 - 20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, A thoroughly reliable, mobile family: You can obtain AL-KO POWER UNIT® extraction systems for maximum airflows between 790 and 10,000 m³/h. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small and medium extraction volumes, or an ideal supplement to existing stationary systems. Your advantages: • IE3 motor as standard • Approx. 73 m² filter area • Pre-separator as standard Lhedpfjhkzt Njx Akvjh • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) • Optional type-tested rotary valve (FSA) • Tested backpressure flap • Integrated automatic extinguishing system Technical data: • Rated motor power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • Max. airflow: up to 8,500 m³/h at the fan • Rated airflow: 6,927 m³/h • Negative pressure at rated flow: 2,543 Pa • Suction connection: 350 mm • Noise level: 71 dB(A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 L • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg - Dust class H3 Location: In stock at 54634 Bitburg - Immediately available – as the unit is in stock Subject to prior sale

Būklė: naujas, Gamybos metai: 2026, Weima Single-Shaft Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The high-performance WEIMA shredders, with their flexible applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips, achieving significant volume reduction of even bulky materials. Operating Principle: The machine is equipped with a large feed hopper and can be loaded either with a conveyor belt or manually. The hopper can be customized to individual requirements and ensures continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Lhjdpfx Ajh Eiw Iskveh Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10-60 mm available (standard 15-20 mm) Paint finish: WEIMA standard RAL 2002 / 7016 Electrical connection: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) with electrical control system (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V - rotor (patented) with integrated knife pockets - Gear limit switch - Pressure bar - Extra robust Weima WAP gearbox - Logspacer (anti-blocking hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Būklė: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Lodpfolht H Nsx Akvehh Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available -