Heraeus Kietinimo Krosnelė pirkti naudotą (283)

Būklė: naudotas, TECHNICAL DATA - Temperature: -40 / +180 [°C] Iiedpfx Ansug U Tnegeg - Power: 12 [kW] - Internal dimensions: 500 x 500 x 500 [mm]

Būklė: naudotas, TECHNICAL DATA - Belt width: 80 [mm] - Max. loading height: 50 [mm] - Max. temperature: 1150 [°C] - Adjustable belt speed: 5 - 100 [cm/min] - Max. load on belt: 3 [kg/m] at 800 [°C] / 1.2 [kg/m] at 1100 [°C] - Heating length: 1000 [mm] Iijdpfjw H Dvpsx Angsg - Cooling length: 1800 [mm] - Protective gas: Nitrogen / Dihydrogen - Protective gas flow rate: 2 [Nm3/h] - Gas for purging: Nitrogen - Flow rate during purging: 1.8 [Nm3/h] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 11.5 [kW]

Būklė: naudotas, TECHNICAL DATA - Belt width: 100 mm - Maximum loading height: 50 mm - Maximum temperature: 1150 °C - Adjustable belt speed: 5 - 100 cm/min - Maximum belt load: 3 kg/m at 800 °C / 1.2 kg/m at 1100 °C - Heating length: 1000 mm - Cooling length: 1800 mm - Protective gas: nitrogen / dihydrogen Iijdpfxou E U Tbe Angsg - Protective gas flow rate: 2 Nm³/h - Gas during purging: nitrogen - Flow rate during purging: 1.8 Nm³/h ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 11.5 kW

Būklė: naudotas, TECHNICAL DATA - Internal dimensions: 320 x 320 x 800 [mm] Iedpfoug U Tbox Angoig

Gamybos metai: 2022, būklė: naudotas, Rėmas pagamintas 2012 m., o įrenginys pilnai atnaujintas 2022 m. ERSA OEM gamintojo. 1x fluksavimo modulis su 1 drop jet flux galvute 180µm 3x įkaitinimo moduliai: apačioje IR lempos, viršuje konvekcija 2x litavimo moduliai, multi wave (panardinimo moduliai): vienas standartinio dydžio, kitas XL su elektromagnetiniu litavimo siurbliu Neįdiegtas atsekamumo (traceability) sistema Iodpfx Ansy Uihtogjig Nauji konvejeriai su sustiprinta grandinės sistema sunkioms apkrovoms Prašome teirautis dėl pilno atnaujinimo apžvalgos ir įrangos būklės!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras ilgis: 1 350 mm, bendras plotis: 930 mm, bendras aukštis: 2 270 mm, Sertifikuota DGUV iki: 07/2027, Įranga: CE žymėjimas, dokumentacija / vadovas, Daugiapakopis elektrinis kepimo pečius Wiesheu EBO 4-86 M Apatinis ir viršutinis kaitinimas reguliuojami atskirai 4 kepimo aukštai, kiekvienas 1 x 600 x 800 mm Orkaitė ant ratukų Viršutinė garų kondensatoriaus garų gaubtas Modulinė sistema Apatinė dalis su skardų laikikliu Jungtis: 400V, 16A-CEE kištukas Matmenys: 930 x 1350 x 2270 mm (PxGxA) Naudota orkaitė Papildomos parinktys: Vandens filtras Iodpfx Ansxxgnvsgsig Kepimo skardos Pristatymo paslauga Sandėlyje turime daug kitų kepimo pečių!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras ilgis: 950 mm, bendras plotis: 970 mm, bendras aukštis: 2 150 mm, Kamerų skaičius: 4, Įranga: CE žymėjimas, dokumentacija / vadovas, Etatinė kepimo krosnis Wachtel Mini Piccolo 4 Aukščiausios klasės elektrinė etatinė krosnis su garinimo funkcija Iedpfx Aneyy R Ufsgsig skirta 4 600x400 mm skardoms DMS 2 valdiklis su naktiniu paleidimu Ištraukimo gartraukis su ventiliatoriumi Apatinė lentyna 4 skardoms 600x400 mm Jungtis: 400V, 2 x 16A-CEE kištukai Matmenys: 970 x 950 x 2150 mm (PxGxA) Naudota krosnis Kokybė iš profesionalios įmonės! Pasinaudokite daugiau nei 35 metų patirtimi! Pasirinkimai: Vandens filtras Slėgio mažintuvas Techninės priežiūros sutartis Instruktavimas ir paleidimas eksploatacijon Daug daugiau kepimo krosnių turime sandėlyje!

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, TOP modelis: Wachtel mini Piccolo 3 Elektrinė daugiaaukštė krosnis su garų sistema DMS 3 valdymas su naktiniu paleidimu Iodpfx Anev N Ti Sogsig Patikima technologija Tik pas mus – DGUV V3 patikrinta Jungtis: 400V, 16A-CEE kištukas Matmenys apie: 970 x 950 x 2130 mm (PxGxA) Krosnis mobilioji Naudota krosnis, išvalyta ir patikrinta SAB Su garantija ir atsarginių dalių aptarnavimu Papildomos parinktys: Vandens filtras Slėgio mažintuvas Priežiūros sutartis Mokymai ir paleidimas Išperkamosios nuomos ir nuomos paslauga Pristatymo paslauga Daugiau krosnių sandėlyje!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, bendras ilgis: 900 mm, bendras plotis: 1 530 mm, bendras aukštis: 2 150 mm, valdymo įtampa: 24 V, Sertifikuota DGUV iki: 07/2027, vandens jungtis: 20 mm, Wiesheu EBO 3-124 aukštinis kepimo krosnis Apatinė ir viršutinė kaitra reguliuojama atskirai 3 kepimo aukštai Krosnis mobili su fiksatoriumi Viršutinė ištraukimo gaubtas su garų kondensatoriumi Apatinis kildinimo spinta Modulinė sistema Jungtis: 400V, 16A-CEE kištukas Matmenys: 1530 x 900 x 2150 mm (plotis x gylis x aukštis) Naudota krosnis Papildomai: Vandens filtras Nuėmimo įrenginys Rankinis pakrovėjas / nuėmėjas Priežiūros sutartis Pristatymas ir prijungimas Ijdpfx Aeyaf Rgjngsig Apmokymas ir paleidimas Turime didelį pasirinkimą kepimo krosnių!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, Sertifikuota DGUV iki: 07/2027, Daugiaaukštė kepimo krosnis Sweba Dahlen Iedpfx Anew Ttl Esgoig Modelis: S-22 S Nerūdijančio plieno korpusas Rankinis valdymas Matmenys: 1600 x 1000 x 1800 mm Jungtis: 400V, 32A CEE kištukas Naudota krosnis Turime daugiau krosnių sandėlyje!

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 73185, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, Elektrinė aukštų kepimo krosnis Miwe Condo modelis: Tipas: CO.3.1208 AS valdymas Apatinė ir viršutinė šiluma reguliuojama atskirai 3 kepimo aukštai 1200 x 800 mm 3 krosnys su garais Judantis pagrindas su fiksatoriumi Jungtis 400V, 3 x 16A-CEE kištukas Vandens prijungimas 3/4 colio, vandens nutekėjimas DN 40 Matmenys: 1500 x 1300 x 1950 mm (plotis x gylis x aukštis) Iisdpexduxajfx Angeg Naudota kepimo krosnis Apsilankykite mūsų dideliame kepyklos įrangos sandėlyje!

Būklė: naudotas, Gamybos metai: 2022, Naudotas. Klauskite papildomos informacijos! Iijdpfxsyzcp De Angjg

Gamybos metai: 2018, būklė: naudotas, Veikianti mašina su techninės priežiūros istorija. Papildomos informacijos teiraukitės! Iisdpfsyxfzkex Angjg

Būklė: naudotas, Gamybos metai: 2018, Darbinė būklė. Prieinama nuo kovo pabaigos. Prašome užklausos dėl kainos! Ijdpeyuv Hhefx Angjig

Gamybos metai: 2022, būklė: naudotas, Veikiančios būklės įrenginiai. Galima įsigyti kelias orkaites, pagamintas 2017–2022 metais. Prašome kreiptis dėl kainos pasiūlymo! Iiodsyi Uu Hepfx Angog

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. Isdevz Hqmepfx Angoig They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm Ijdjvz Hhxjpfx Angsig - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm Iedovz Hqgepfx Angjig - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm Iisdpevz Hqtsfx Angjg - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm Iodpfxevz Hq To Angeig - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 Isdovz Hqyopfx Angoig The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm Ijdpfx Anjvz Hq Hogsig - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, Sertifikuota DGUV iki: 07/2027, Daugiapakopis elektrinis kepimo pečius Iedpovkn S Djfx Angoig Wiesheu tipas: EBO 3-64 Apatinė ir viršutinė kaitra reguliuojama atskirai Kepimo pečius su ratukais ir stabdžiu Viršuje kondensaciniu dangteliu ištraukiamas garas Apačioje kildinimo spinta Modulinė sistema Tik pas mus patikrinta pagal DGUV V3 Jungtis: 400V, 16A-CEE kištukas Matmenys: 930 x 1350 x 1900 mm (PxGxA) Naudotas, išvalytas kepimo pečius + Atsarginių dalių aptarnavimas Daug kepimo pečių sandėlyje!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras ilgis: 1 280 mm, bendras plotis: 980 mm, bendras aukštis: 2 200 mm, Sertifikuota DGUV iki: 06/2027, Wachtel Piccolo 1-4 aukštų krosnis AUKŠČIAUSIOS kokybės elektrinė aukštų krosnis 4 skardoms, 600x800 mm DMS 2 valdymo sistema su naktinio paleidimo funkcija Raugimo spinta & gartraukis Iodpfxoytl Hnj Angeig Jungtis: 400V, 16A-CEE kištukas Matmenys: 980 x 1280 x 2200 mm (plotis x gylis x aukštis) Krosnis mobili Naudota krosnis Papildomai: Vandens filtras Kepimo skardos Slėgio mažintuvas Priežiūros sutartis Pristatymo paslauga Instruktavimas & paleidimas Daugiau krosnių rasite mūsų ekspozicijoje!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras ilgis: 1 300 mm, bendras plotis: 1 500 mm, bendras aukštis: 1 950 mm, Daugiaaukštė orkaitė, elektrinė kepimo orkaitė Miwe Condo Modelis: Tipas: CO.5.1208 AS valdymas Apatinė ir viršutinė kaitra reguliuojama atskirai 5 kepimo lygiai 1200 x 800 mm Iisdsv N Tkcopfx Angsg Apatinis rėmas su ratukais ir stabdžiais Jungtis: 400V, 5 x 16A-CEE kištukas Išmatavimai: 1500 x 1300 x 1950 mm (plotis x gylis x aukštis) Naudota kepimo orkaitė Apsilankykite mūsų didelėje ekspozicijoje!