Cronosstech Chp 600 pirkti naudotą (12 258)

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Mobile control panel Centrally driven rolls powered by motor Hydraulic up-down movement rear roll and bottom roll Precision bending with braked main motor Conical bending and pre-bending system Bottom and top rolls driven by planetary gearbox Rear Roll Ball System to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Operating manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Wire grooves on shaft ends NC Control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 6/8 mm Kodpfx Ajw Slcgjiuodl Bending: 8/10 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Būklė: naujas, Gamybos metai: 2025, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 320 mm, viršutinio volo skersmuo: 320 mm, šoninio volelio skersmuo: 240 mm, darbinis plotis: 2 050 mm, maks. lakšto storis: 25 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kojinis nuotolinio valdymo pultas, STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via body-mounted hydraulic pistons * Protected against overload * Upper and side rolls driven by hydromotor and planetary gearbox (all 3 rolls are motor-driven) * Positions of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and the shaft that automatically lifts upwards * Very easy operation with a movable control panel * Welded steel frame construction * Induction-hardened SAE 1050 (CK 50), forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support during large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system Kodjxw Eblepfx Aiusdl * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Upper & Lower Roll Diameter: 320 mm Side Roll Diameter: 240 mm Motor Power: 20 kW Bending Speed: 1.5 – 5 m/min Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Būklė: naujas, Gamybos metai: 2025, galia: 18,5 kW (25,15 AG), eigos ilgis: 310 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 140 mm/s, stalo aukštis: 965 mm, gerklės gylis: 410 mm, darbinis plotis: 4 100 mm, lenkimo jėga (didž.): 220 t, atstumas tarp stulpų: 3 600 mm, valdymo tipas: CNC valdymas, atgalinio ribotuvo reguliavimas: valdomas CNC, ašių skaičius: 4, karūnavimo tipas: varomas varikliu, pavaros tipas: hidraulinis, STANDARD FEATURES CNC controlled hydraulic press brake CNC controlled (4-axis): Y1 – Y2 – X – R axes CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display) Offline PC programming capability Stress-relieved, heavy-duty steel frame CNC controlled synchronized cylinder system 310 mm stroke 410 mm throat depth ±0.03 mm precision servo motorized backgauge Backgauge travel distances: X axis: 750 mm R axis: 250 mm Backgauge system with ball screw spindles and linear guides Sliding type front support arms Manual crowning system (wedge type) European type narrow lower table European type quick-release upper tool clamping system (Promecam type) High-precision linear scales Standard upper punch (H: 67 mm – 85° – R: 0.8) Standard lower die (60×60 mm – 4 groove V: 16 / 22 / 35 / 50 mm) Front safety system with laser beam LED lighting Foot pedal Emergency stop buttons Safety equipment according to CE standards OPTIONAL FEATURES 4 / 6 / 8-axis backgauge systems starting from X + R Extension of backgauge X axis travel to 1000 mm Additional backgauge fingers Hydraulic upper and lower tool clamping systems Motorized crowning system Wide lower table for multi-groove dies Front safety laser system (AKAS or DSP) Rear safety light barrier CNC controlled front sheet support systems Automatic angle measurement system Oil cooler or oil heater Air-conditioned cooling system for electrical cabinet Deep throat option TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Kedpfx Ajx Nqqreiuedl Bending force: 220 tons Bending length: 4100 mm Distance between side frames: 3600 mm Stroke: 310 mm Daylight opening: 515 mm Throat depth: 410 mm Table height: 965 mm Backgauge axes: X = 750 mm / R = 250 mm Approach speed: 180 mm/s Working speed: 140 mm/s Return speed: 10 mm/s Main motor power: 18.5 kW Hydraulic oil tank capacity: 290 L Machine weight: ~13,650 kg Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm

Būklė: naujas, Gamybos metai: 2025, galia: 3 kW (4,08 AG), spaudimo jėga: 35 t, eigos ilgis: 70 mm, stalo plotis: 400 mm, stalo ilgis: 600 mm, bendras svoris: 1 500 kg, perforavimo jėga: 35 t, eigos reguliavimas: 45 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Press; is a mechanical press type used in cold forming operations such as punching, shearing, and stamping, operated by the force generated through an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C Type Eccentric Press 35 Ton is designed for stable operation in cold forming applications. Its robust steel construction frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirements via central automatic lubrication - Ready-to-use operation with PLC control + dual hand/foot control Areas of Application - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-way guided slide • Spheroidal cast connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Central system fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot operation system • Mechanical safety system • Emergency reverse motor function • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) Kdjdjx N Nd Rspfx Aiujl • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • Custom die set (1 set as per requirements) • Eight-guideway slide ✅ TECHNICAL FEATURES (35 TON) Capacity: 35 Ton Bolster usable area: 400×600 mm Stroke length: 0–70 mm Nominal material thickness: 2.5 mm SPM (strokes per minute): 120 Bolster–ram distance: 330 mm Adjustment (ram setting): 45 mm Bolster hole diameter: Ø130 mm Ram die shank diameter: Ø35 mm Safety clutch: Mechanical safety system Lubrication system: Automatic lubrication PLC: Yes Safety light curtain: Yes Drive system: Pneumatic clutch–brake system Mounting style: Floor-mounted Frame type: C type steel construction Motor power: 3 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×H): 1100×1400×1800 mm Approximate weight: 1500 kg Note: If you require changes to the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 200 mm, stalo plotis: 1 100 mm, stalo ilgis: 2 000 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric presses are mechanical press types powered by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and shaping. H type (straight-side) eccentric presses provide high stability and process safety with their rigid body structures, especially in large table and heavy die applications. CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With a monoblock frame, 8-point guided slide system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with a 2000×1100 mm table size for large dies - Die/equipment protection with hydraulic overload safety device - Precise slide guidance with 8-point guided slide and counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with photoelectric light curtain Applications - Punching/cutting/forming operations requiring a large table - Series production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized slide adjustment mechanism • Photoelectric safety curtain • Enclosed oil tank with gear set • Dual-solenoid safety valve • CE compliance ✅ OPTIONAL FEATURES Kodpfx Aiox N Rwrsuodl • Press feeding systems • Scrap material ejection systems • Sliding safety cover at table front • Custom-configured die ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimensions: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 125 t, eigos ilgis: 200 mm, stalo plotis: 750 mm, stalo ilgis: 1 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric presses are mechanical press types driven by force generated via an eccentric mechanism, mainly used for cold forming operations such as punching, cutting, and forming with dies. H-type (straight-side) eccentric presses offer high stability and process safety thanks to their rigid frame structures. CRONOSSTECH CEHP-TB-125 – H-Type Eccentric Press 125 Ton is designed for stable operation in high-volume production, with a focus on die protection and operator safety. Featuring a mono-block frame, 8-point ram guidance system, hydraulic overload protection, and an automatic lubrication infrastructure, it delivers reliable performance for continuous production conditions. Key Advantages - Stable and repeatable production with 1100×750 mm table size - Die/equipment protection via hydraulic overload safety - Controlled, user-friendly operation with PLC + touchscreen interface - High operator safety with light curtain protection - Low maintenance requirement with automatic lubrication system Applications - Punching / cutting / die forming processes - Serial production with automatic feeding lines - High-volume manufacturing processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch & brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Ram with counterbalance piston • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motion motor • Hydraulic overload protection • Motorized ram adjustment • Light curtain safety system • Enclosed gear unit in oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover in front of table Kodpfx Aisx N R U Rjujdl • Custom die design/specifications ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-125) Capacity: 125 Tons Table-Ram Distance: 500 mm Housing Width: 1130 mm Ram Adjustment: 100 mm Press Width: 2700 mm Press Depth: 2200 mm Press Height: 4500 mm Table Dimensions: 1100×750 mm Ram Face Size: 1100×750 mm Stroke (Fixed): 200 mm Motor Power: 18.5 kW Weight: 14,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 200 t, eigos ilgis: 200 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, garantijos trukmė: 24 mėnesiai, Eccentric Press; is a type of mechanical press powered by force generated via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses offer high stability and process safety due to their rigid frame structure. The CRONOSSTECH CEHP-TB-200 – H-Type Eccentric Press 200 Ton is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance in continuous production environments. Key Advantages - Stable operation with large dies thanks to a 1200×1000 mm table size - Die/equipment protection with hydraulic overload protection - Controlled and user-friendly operation via PLC + touchscreen interface - Enhanced operator safety with photoelectric safety curtain - Low maintenance requirement with automatic lubrication system Areas of Application - Punching / cutting / forming applications with dies - Mass production with automatic feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke with single connecting rod • Balancer piston on the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD Kdsdox N Sccjpfx Aiujl • Reverse motor movement • Hydraulic overload safety system • Motorized ram adjustment mechanism • Photoelectric safety curtain • Enclosed oil reservoir for gear assembly • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety guard at the front of the table • Custom dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-200) Capacity: 200 Ton Table–ram distance: 500 mm Housing width: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 30 kW Weight: 24,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 80 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal spinning applications. The 8-gib H-frame design provides maximum rigidity during pressing operations, while parallelism and perpendicularity tolerances are steadily maintained throughout the stroke. Kedpex N Uaqefx Aiuodl The CHSP 250/80 model—with 250-ton main ram and 80-ton blankholder (cushion) capacity—is intended for medium- to high-tonnage deep drawing and spinning operations. The machine frame is stress-relieved via vibration for long-term durability and reliable operation. ⚙️ Standard Equipment - Welded steel construction, 8-gib H-frame press body - Vibratory stress-relieved frame structure - Bronze Zr14 gib slideways - Weld seam applications approved according to WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 - Type: Welded steel, 8-gib H-frame press body - Frame Material: St52 – ERDEMİR - Gib Slideways: Bronze Zr14 - Capacity (Ram): 250 tons - Capacity (Cushion): 80 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Weld Application: WPQR and WPS certified by TÜRK-AK, approved according to EN ISO 15614-1/2017. Weld operations are overseen by certified “welding coordination engineers” per EN ISO 14731. - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/s - Drawing Speed of Moving Table: 12 mm/s - Return Speed of Moving Table: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Charge Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Measuring Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 350 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1000/350 H Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting (ram + cushion) system architecture for heavy-duty metal forming, deep drawing, and stamping applications. Thanks to its 8-guided H-frame structure, high rigidity is maintained throughout the pressing process, and parallelism and perpendicularity tolerances are stably preserved even with large table dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and a 350-ton die cushion capacity, is specifically designed for deep drawing operations requiring controlled material flow, especially in the automotive, white goods, defense, and heavy industries. The steel construction frame is stress-relieved by vibration, providing long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning control • Monitoring of hydraulic oil temperature and system status on display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Cushion): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Kedpfx Aiex N Uilousdl Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 3 100 mm, maks. lakšto storis: 8 mm, garantijos trukmė: 12 mėnesiai, CNC Controlled Hydraulic Guillotine Shear – 3000 x 8 mm With high cutting accuracy, robust frame construction, and CNC-controlled systems, it is the ideal solution for sheet metal workshops and industrial production lines. Delivers high-quality and repeatable cutting performance across various sheet thicknesses. Standard Features - ELGO P40T Touchscreen NC Control Unit - Rexroth / Hoerbiger hydraulic system - Automatic CNC-controlled blade gap, stroke, and blade angle adjustment - 1,000 mm NC-controlled, programmable, motorized backgauge - 250 mm throat depth - Programmable backgauge retract function - Backgauge lift feature for workpieces over 1,000 mm - Cutting length adjustable from the control panel to increase cycle rate for short cuts - Ball transfer sheet support table - Upper blade with 2 cutting edges / Lower blade with 4 cutting edges - Special linkage system to reduce maintenance needs - 1,000 mm front support arms with ruler, T-slot, and stopper - Front and side safety guards - Cutting line illumination and shadow wire Kdsdpox Rrk Nsfx Aiuol - Front finger guard sheet (1,000 mm openable cover) - Foot pedal - Movable control arm and safety enclosures - Emergency stop buttons Optional Features - Rear pneumatic sheet support system (Type 1) - Rear pneumatic sheet support system, forward delivery (Type 2) - Miter gauge with angle adjustment (0–180º) - Front support arms in desired length - Special throat depth (500 mm) - Full-length openable front finger guard cover - Front finger safety light curtain - Special blade - Laser cutting line - Oil heater or oil cooler - Automatic or manual central lubrication - Air-conditioned electric cabinet cooling - CNC front sheet support arms - CE compliant rear light barrier - Light-duty guard Technical Specifications (3000 x 8 mm) - Cutting length: 3,100 mm - Cutting capacity (450 N/mm²): 8 mm - Cutting capacity (700 N/mm²): 5 mm - Cutting angle: 0.5 – 2.7° - Number of hold-down cylinders: 14 - Cutting speed: 10 / 15 strokes/min - Throat depth: 250 mm - Backgauge travel (X): 1,000 mm - Table length: 3,500 mm - Table width: 900 mm - Main motor power: 15 kW - Oil tank capacity: 275 L - Machine weight: ~7.5 tons Technical specifications may vary depending on requested configuration.

Būklė: naujas, Gamybos metai: 2026, valdymo tipas: NC valdymas, automatizacijos lygis: automatinis, pavaros tipas: mechaninis, darbinis plotis: 3 060 mm, pjovimo kampas (min.): 1,3 °, eigos dažnis (min.): 41 aps./min, maks. lakšto storis: 4 mm, plieno lakšto storis (maks.): 4 mm, atgalinio ribotuvo reguliavimas: varomas varikliu, galinis atmušas: 750 mm, galia: 7,5 kW (10,20 AG), garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, pirštų apsauga, Standard Features ELGO P40T CNC control unit Robust, monolithic welded frame structure ensures maximum cutting accuracy NC-controlled, motorized 750 mm backgauge system Top blade with 2 cutting edges, bottom blade with 4 cutting edges, manufactured from high alloy steel Mechanical hold-down system prevents sheet slippage during cutting Easily adjustable blade gap setting mechanism Ball transfer front table Front support arms with scale Cutting line illumination system Finger guard system Foot pedal Kedeyg Ic Eopfx Aiusdl Rear safety guard cages Emergency stop button Optional Features 1,000 mm backgauge system Rear sheet support and sliding system for easy repositioning and sliding of the sheet to the rear Drop-down system for the cut part to fall to the front Adjustable angle gauge at the front, 0–180° Front support arms with custom length on request Manual 750 mm backgauge, front-adjustable handwheel system Rear safety light barrier Technical Specifications Machine Type: A04/3060 Cutting Capacity (450 N/mm²): 4 mm Cutting Length (A): 3060 mm Cutting Angle: 1.3° Cutting Speed: 41 strokes/min Table Depth (C): 800 mm Machine Dimensions (L × W × H): 3600 × 2250 × 1400 mm Motor Power: 7.5 kW Weight: 4000 kg

Būklė: naujas, Gamybos metai: 2025, galia: 7,5 kW (10,20 AG), spaudimo jėga: 100 t, stalo plotis: 670 mm, stalo ilgis: 950 mm, perforavimo jėga: 100 t, pramušama skylė stalo paviršiuje: 180 mm, cilindro skersmuo: 45 mm, eigos reguliavimas: 120 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates by means of the force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is a highly efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver reliable performance tailored for serial production environments. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement through centralized automatic lubrication - Production-ready usability with PLC control + dual hand/foot pedal operation Typical Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-way guided slide • Spheroidal cast connecting rod and gear bushings • Crankshaft and drive shafts made of 4140 quenched & tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual solenoid safety valve • Manually adjustable stroke • Finger–hand safety protection with light curtain • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor operation • Occupational safety regulations compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener units • One set of custom dies (on request) Kdsdpevtx Injfx Aiusl • Eight-way guided slide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bed–ram distance: 400 mm Slide–table clearance: 465 mm Distance between side frames: 420 mm Ram adjustment (shut height adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchor span: 710 mm Side anchor span: 1135 mm Table bore diameter: Ø200 mm Table size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approx. weight: 4650 kg Note: Please notify us if you require any changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 300 t, stalo plotis: 900 mm, stalo ilgis: 1 200 mm, pramušama skylė stalo paviršiuje: 260 mm, hidraulinio cilindro reguliavimas: 150 mm, eigos reguliavimas: 200 mm, Įranga: apsaugos šviesos užtvara, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Vibration-based stress relief for frame and welded parts - Table parallelism and squareness tolerances in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-point gibs - Ram equipped with cushioning cylinder - Ram, connecting rod, and slide block (clutch) made of forged steel, GS52 - High-strength one-piece crankshaft – 4140 - Bronze bushings inside connecting rod (Zr14) - Rear-mounted flywheel - Spare bolster plate included - Hydraulic overload protection - Motorized die height and ram adjustment - Automatic central lubrication - Pneumatic pedal with interlock and time-controlled dual-hand control - Electric counter included - PLC control and touchscreen – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light curtains – SICK, LEUZE - Safety PLC (controls all electric systems, valves, dual-hand and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Position interlock switch and electrical cabinet - Safety block - Protective guarding in compliance with CE available Ksdpevyr Easfx Aiuedl TECHNICAL SPECIFICATIONS Type: D TYPE MONOBLOCK FRAME Capacity: 300 Ton Table-Ram Distance: 530 mm Clearance Between Uprights: 1280 mm Ram Adjustment: 150 mm Approx. Width: 1700 mm Approx. Depth: 2200 mm Approx. Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 x 1200 mm Die Clamping Hole Diameter: 60 mm Ram Size: 470 x 900 mm Floor to Table Height: 1000 mm Stroke Adjustment: 20 – 200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 KW Motor Speed: 1450 RPM Approx. Weight: 18,000 kg

Būklė: naujas, Gamybos metai: 2025, galia: 7,5 kW (10,20 AG), pjovimo aukštis (maks.): 700 mm, pjovimo plotis (maks.): 1 100 mm, pjovimo greitis: 80 mm/min, garantijos trukmė: 24 mėnesiai, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL MAXIMUM ROUND CAPACITY: 700 MM MAXIMUM RECTANGULAR CAPACITY: 700 x 1100 MM MAXIMUM SQUARE CAPACITY: 700 x 700 MM STANDARD MOTOR-DRIVEN WORKTABLE COLUMN TYPE SEMI-AUTOMATIC VARIABLE SPEED CONTROL Kdsdpsvzh Dujfx Aiujl PRECISION HEAD DESCENT SYSTEM PLEASE REQUEST A QUOTE FOR FURTHER DETAILS.

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 300 mm, viršutinio volo skersmuo: 300 mm, šoninio volelio skersmuo: 280 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 18 mm, STANDARD EQUIPMENT Kdjdpfx Ajw Slf Ueiusl * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * The hydraulically opening head enables quick and easy removal of bent parts * Very simple operation with movable control panel * The positions of the lower rolls are easily readable with two digital indicators * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel shaft movement * Extended shaft ends for mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (hoist) for supporting large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Profile bending rolls for section bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Top & Bottom Roll Diameter: 300 mm Side Roll Diameter: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, galia: 4 kW (5,44 AG), STANDARTINĖ ĮRANGA Suvirinta plieninė konstrukcija Trijų varančiųjų volų pavaros Ypatingai tvirti, grūdinti ir šlifuoti velenai, pagaminti iš specialios medžiagos Darbas horizontalioje ir vertikalioje padėtyje Grūdinti standartiniai volai Atskiras, nuo korpuso nepriklausomas valdymo pultas Mechaniniai rankiniai šoniniai atramos, judančios 3 kryptimis Tikslus lenkimas su stabdžiu variklyje 2 skaitmeniniai indikatoriai Kodsw Smhwopfx Aiusdl PAPILDOMA ĮRANGA Vamzdžių ir profilių lenkimo volai Papildomos 2 ašių hidraulinės šoninės atramos Automatizavimas su NC valdymu TECHNINĖS CHARAKTERISTIKOS Viršutinio veleno skersmuo: 60 mm Apatinio veleno konstrukcija: 50 mm Volo skersmuo: 180 mm Darbinis greitis: 6 m/min Variklio galia: 3,75 kW Ilgis: 1200 mm Plotis: 850 mm Aukštis: 1200 mm Svoris: 955 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 460 mm, viršutinio volo skersmuo: 460 mm, šoninio volelio skersmuo: 380 mm, darbinis plotis: 2 050 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, galia: 38,5 kW (52,35 AG), garantijos trukmė: 12 mėnesiai, STANDARD EQUIPMENT * Bottom and side rolls are moved up and down linearly via body-mounted hydraulic pistons * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read using three digital displays * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Easy operation via movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for synchronized movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system Kdsdpfxsxd S T Ue Aiusl OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (hoist) for support in large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special jobs * Infinitely variable speed adjustment system * Electronic balancing system for synchronized movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Top & Bottom Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19800 kg

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 300 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 200 mm, eigos reguliavimas: 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Šios mūsų presai ir padavimo linijos, skirtos durų bei langų aksesuarų pramonei ir pasižyminčios dvigubu bei viengubu darbo režimu, užtikrina maksimalų našumą bei ilgalaikį darbą. Langų aksesuarų sektoriuje, kur masinė gamyba yra neišvengiama, mūsų presai ir sukaupta patirtis garantuoja didžiausią klientų pasitenkinimą. -Slėgio jėga iki 400 tonų -Stalo ilgis iki 6000 mm -2 arba 3 švaistiklių pasirinkimas -Automatinis nuolatinis plonas tepimas -Progresyvinio tepimo blokas -Prieiga prie preso iš galinės ir priekinės pusės -Slidžios durelės su magnetiniais jutikliais -Indukciškai grūdinti ir šlifuoti krumpliaračiai -Pleištiniu užraktu atliekami krumpliaračio ir stebulės sujungimai PRESAVIMAS: 300 TONŲ APSUKOS: 40-70 APS./MIN. STŪMOKLIO EIGA: 60 MM MAKS. FORMOS AUKŠTIS: 340 MM STALO – STŪMOKLIO AUKŠTIS: 400 MM REGULIAVIMAS: 100 MM VIRŠUTINIO STALO MATMENYS: 400X3000 MM APATINIO STALO MATMENYS: 400X4200 MM VARIKLIS: 22 KW Kdodexrbn Rjpfx Aiusl VARIKLIO APSUKOS: 3000 APS./MIN.

Būklė: naujas, Gamybos metai: 2025, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 380 mm, viršutinio volo skersmuo: 380 mm, šoninio volelio skersmuo: 300 mm, darbinis plotis: 3 100 mm, maks. lakšto storis: 25 mm, Įranga: avarinis stabdymas, dokumentacija / vadovas, grūdinti volai, kojinis nuotolinio valdymo pultas, pasukamas viršutinis volas, STANDARD EQUIPMENT * Lower, upper, and side rolls are actuated up and down via hydraulic cylinders attached to the machine frame * Equipped with overload protection Ksdpfexw Ecvjx Aiuedl * Upper and side rolls are driven by hydromotor and planetary gearbox (3-roll motor drive) * The positions of the rolls can be easily read with three digital displays * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Very user-friendly operation with movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed working system OPTIONAL EQUIPMENT * NC and CNC automation control * Overhead crane (elevator) for supporting large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special jobs * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-Bending Capacity: 16/20 mm Bending Capacity: 20/25 mm Upper & Lower Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 – 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 19,200 kg

Būklė: naujas, Gamybos metai: 2025, galia: 30 kW (40,79 AG), eigos ilgis: 310 mm, darbinis greitis: 8 mm/s, atbulinės eigos greitis: 80 mm/s, stalo aukštis: 985 mm, gerklės gylis: 510 mm, darbinis plotis: 4 100 mm, lenkimo jėga (didž.): 400 t, atstumas tarp stulpų: 3 600 mm, valdymo tipas: CNC valdymas, atgalinio ribotuvo reguliavimas: valdomas CNC, ašių skaičius: 4, karūnavimo tipas: varomas varikliu, pavaros tipas: hidraulinis, Standard Features • Y1, Y2, X, R – 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) Ksdpfjx Npalsx Aiusdl • Narrow lower table (European type) • GIVI brand linear scales • Standard top tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4, 6, or 8 axis back gauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic top and bottom die clamping • Wide bottom table for multi-channel die • Back gauge X travel up to 1000 mm • AKAS or DSP laser beam front safety system • Additional back gauge fingers • Additional back gauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22,500 Main Motor (kW) 30 CNC Control Unit ESA S640 CNC Axes Y1-Y2-X-R (4 axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, darbinis plotis: 4 000 mm, pjovimo kampas (min.): 0,5 °, pjovimo kampas (maks.): 3 °, eigos dažnis (min.): 12 aps./min, maks. lakšto storis: 10 mm, plieno lakšto storis (maks.): 10 mm, STANDARD FEATURES CNC-controlled, angle-adjustable hydraulic guillotine shear CNC-controlled blade gap adjustment, stroke and cutting angle setting Touchscreen CNC control unit (ELGO P40T) Automatic cutting angle adjustment (based on material type and thickness) Automatic stroke shortening feature (increased speed for short cuts) High-precision, stress-relieved steel frame Hardened guides and roller upper table movement system 1,000 mm CNC-controlled, motorized and programmable backgauge Backgauge features: - Programmable retraction - Lift-up function for long parts - ±0.1 mm positioning accuracy Ball screw sheet feeding front support table Upper blade: double cutting edge / Lower blade: four cutting edge High-alloy steel blades Special joint system reducing maintenance requirements Front support arms with ruler, T-slot and stopper (1,000 mm) Cutting line illumination and shadow wire Front finger guard (openable type) Front and side safety covers Ksdpfx Ajx Nqphsiujdl Foot pedal Mobile control lever Emergency stop buttons Safety equipment compliant with CE standards OPTIONAL FEATURES Rear pneumatic sheet support system – Type 1 Rear pneumatic sheet support system – Type 2 (with forward feeding) Angle-adjustable front square arm (0–180°) Front support arms in custom lengths Full-length openable front finger guard cover Front finger safety light curtain Rear safety light barrier (CE compliant) Special blade options Laser cutting line Oil heater or oil cooler Automatic or manual central lubrication system Electrical cabinet cooling system with air conditioning CNC-controlled front sheet support and feeding arms Special throat depth (500 mm) Lightweight guard TECHNICAL SPECIFICATIONS (C 10 / 4000 MODEL) Cutting capacity (450 N/mm²): 10 mm Cutting capacity (700 N/mm²): 6 mm Cutting length: 4,000 mm Cutting angle: 0.5° – 3° (CNC controlled) Cutting stroke: Automatically adjustable Throat depth: 250 mm Backgauge travel distance (X axis): 1,000 mm Cutting speed: 6 – 12 strokes/min Motor power: 22 kW Oil tank capacity: 300 liters Machine weight: ~16 tons Machine dimensions (LxWxH): approx. 5,790 x 3,650 x 2,580 mm

Būklė: naujas, Gamybos metai: 2025, eigos ilgis: 300 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 95 mm/s, valdiklių gamintojas: ESA - DELEM - Cybelec, darbinis plotis: 3 100 mm, lenkimo jėga (didž.): 100 t, atstumas tarp stulpų: 3 345 mm, valdymo tipas: CNC valdymas, ašių skaičius: 4, pavaros tipas: elektrinis, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Ton (E100 Model) STANDARD FEATURES - CNC-controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes total) - CNC control unit (ESA S830 – 10” color touchscreen, 2D graphic display) - Automatic bend calculation and collision avoidance functions - High-precision synchronized servo drive system - Oil-free, low-maintenance belt-driven ram movement system - Spring-assisted ram structure supporting energy recovery - O-frame body design for minimum deflection - 300 mm stroke - 410 mm throat depth - Servo-driven backgauge system (X + R axes) - Backgauge accuracy: ±0.03 mm - Backgauge travel distances: • X axis: 750 mm • R axis: 250 mm - Hardened ball screws and linear guides - 2 backgauge fingers with 3 positioning stages - European style upper punch holder – quick release (Promecam type) - European style narrow lower table - Standard upper tool (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4-V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED work area illumination - Sliding front support arms - Dual foot pedal - Emergency stop buttons - Safety equipment compliant with CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel increase to 1000 mm - Motorized crowning system - Hydraulic upper and lower tool clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light barrier - CNC-controlled sheet support arms - Laser bend line - Laser angle measurement system - Automatic angle measuring systems - Electrical cabinet air conditioning cooling system Kjdpjx Nqukjfx Aiuodl - Additional backgauge fingers - Special tool and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons - Bending length: 3100 mm - Distance between side frames: 3345 mm - Stroke: 300 mm - Throat depth: O-frame body - Open height (between upper and lower beam): 515 mm - Table height: 900 mm Speeds - Approach speed: 95 mm/sec - Bending speed: 10 mm/sec (CE compliant) - Return speed: 95 mm/sec Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/sec - R axis speed: 100 mm/sec - Z axis speed: 600 mm/sec General - Main motor power: 2 × 5.5 kW - Machine weight: ~7,500 kg - Machine dimensions (LxWxH): approx. 4600 × 2000 × 2650 mm

Būklė: naujas, Gamybos metai: 2024, perforavimo jėga: 55 t, COUNTRY OF ORIGIN: TURKEY WARRANTY PERIOD: 12 MONTHS DELIVERY DATE: PLEASE INQUIRE DELIVERY TERMS: EXW BURSA/TURKEY STANDARD FEATURES: • 12 independent hydraulic pistons and 2 separate foot pedals, allowing two operators to work simultaneously • Adjustable piston stroke for increased efficiency and faster operation • Centralized lubrication system • Rear backgauge with electrical switch • Work lamp • 5 different workstations integrated on a single frame: 6.1 – Ø22 mm punch and die with standard punching tools 6.2 – Solid round and solid square cutting blade set 6.3 – Angle iron cutting blade set 6.4 – Flat bar and sheet metal cutting blade set 6.5 – U-notching blade set PUNCHING STATION HKM 55 Maximum diameter at max thickness Ø 20 x 20 mm Diameter x thickness (DxT) Ø 40 x 10 mm Maximum thickness at max diameter Ø 100 x 3 mm Stroke length 60 mm Number of strokes 25 Throat depth 255 mm Working height 1030 mm SOLID MATERIAL SHEAR HKM 55 Round / square Ø 40–40 mm ANGLE IRON SHEAR HKM 55 SHEAR 90° angle iron 120 x 120 x 12 mm 45° angle iron 70 x 10 mm Working height 1130 mm SHEET/FLAT BAR SHEAR HKM 55 Flat sheet 200 x 20 mm Flat sheet 300 x 15 mm Blade length 317 mm Angle cutting 80 x 15 mm Working height 900 mm NOTCHING STATION HKM 55 Material thickness 10 mm Width 45 mm Depth 90 mm Working height 900 mm SPECIAL DIES HKM 55 Kdedpfx Aijvg D Nkousl U-I profile blades (for cutting UPN – IPN) 120 x 58 mm T-profile blades 80 x 9 mm Special notching set 100 x 100 x 10 mm V-bending 250 x 12 mm Flat bar bending max V-bending 500 x 3 mm Sheet bending max Punch in notching station 125 mm Throat depth Punch in notching station Ø 38 x 8 mm Sheet bending max TECHNICAL SPECIFICATIONS HKM 55 Motor power 5.5 kW Weight 1520 kg Machine dimensions (LxWxH) 1500 x 950 x 1880 mm Pressure 55 tons

Būklė: naujas, Gamybos metai: 2024, Vamzdžio skersmuo (maks.): 38 mm, Vamzdžio ilgis (maks.): 3 000 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 200 mm, bendras ilgis: 4 280 mm, bendras plotis: 1 000 mm, bendras aukštis: 1 500 mm, garantijos trukmė: 12 mėnesiai, aliuminio lakšto storis (maks.): 3 mm, plieno lakšto storis (maks.): 3 mm, STANDART DONANIM • 3 Takım Kalıp – (1 takım Yuvarlama kalıbı ile 2 takım bükme kalıbı veya talep edilen ölçülerde 3 takım bükme kalıbı) • 5 eksen servo kontrol (Y, B, C, H, V) • Servo Motorlu Besleme Ekseni • Servo Motorlu Döndürme Ekseni • Servo Motorlu Bükme Ekseni • Servo Motorlu H, V Eksenleri • 21” TFT Dokunmatik Ekranlı Mobil CNC Kontrol Ünitesi • Yuvarlama yapabilme özelliği • 3D Bükme Simülasyonu • Çarpışma Simülasyonu • Günlük, Haftalık ve Aylık Toplam Çalışma Durumu Raporları • Çalışılan Malzeme Uzunluğunu Hesaplama • Tahmini Bükme Süresi Hesaplama • X-Y-Z'den Y-B-C'ye Dönüştürme • Acil Durmalı Mobil Ayak Pedalı • Uzaktan Destek • Mandrarelli ve Mandrarelsiz Bükme • Bükme Kafası Arka Güvenlik Sacı • Hidrolik Sıkıştırma • Hidrolik Mandrel • Hidrolik Destek • Hidrolik Lineer Kızak Sistemi • Hidrolik Pençe Tipi Tutucu • Elektrik Panosu Güvenlik Kilidi ve Anahtarlı Panel Kilidi • Elektrik Sistemi Soğutucu • Aşırı Yük Koruma • Detaylı Çalışma Raporu Otomatik Mail Olarak Gönderilir OPSİYONEL DONANIM (Fiyata dahil değildir) Kjdpfsu Hkb Dox Aiusdl • Ekstra Kalıp Takımları • Güvenlik Paspası (750 x 1000mm) • Güvenlik Paspası (1000 x 1500mm) • Hidrolik Yağ Isıtıcı • Ekstra Mandrel Uzunluğu (6 m'ye kadar) - metre başına • Bilyalı Mandrel ve Sıyırıcı Kalıp • Otomatik Mandrel Yağlama Sistemi (uygun boru çaplarında) • Hidrolik Yağ Soğutucu TEKNİK ÖZELLİKLER KAPASİTE MB-38 CNC/ 5 EKSEN Maks. Kapasite mm Ø38x3mm Maks. Bükme Yarıçapı mm 250mm Maks. Bükme Açısı ° 190° Hidrolik Basınç bar 50-200 Çalışma Uzunluğu mm 3000 Dönme Toleransları ±0,1 Bükme Hızı kw Değişken UxGxY mm 5500x1300x1600 Ağırlık kg 2250

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 200 t, eigos ilgis: 800 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 70 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 200/70 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description Kdedpfx Aisx N T U Tjujl The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed using a double-acting working principle to ensure controlled material flow in sheet metal forming, deep drawing, and spinning applications. Thanks to the 8-guided H-frame construction, the press provides maximum rigidity during operation, and parallelism and perpendicularity tolerances are consistently maintained throughout the stroke. The CHSP 200/70 model, with a 200-ton main ram and a 70-ton lower cushion (pot), is designed for medium to high tonnage deep drawing and spinning operations. The frame construction is stress-relieved by vibration method, aiming for long-lasting and reliable operation. ⚙️ Standard Equipment - Steel construction, 8-guideway H-frame press body - Vibration stress-relieved frame structure - Bronze Zr14 slideway bushings - Welded structure with WPQR and WPS approval by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing according to CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 200/70 - Type: Steel construction, 8-guideway H-frame press body - Frame Material: St52 – ERDEMİR - Slideway Bushings: Bronze Zr14 - Capacity (Ram): 200 Tons - Capacity (Cushion): 70 Tons - Moving Table Dimensions: 1000 × 1200 mm - Fixed Table Dimensions: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Weld Stress Relief: Vibratory stress relief - Welding Application: WPQR and WPS approved by TÜRK-AK accredited supervisors, EN ISO 15614-1/2017 (Welding applications are overseen by certified "welding coordination engineers" according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 22 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Cushion Table Forward Speed: 30 mm/sec - Main Cylinder Bore Diameter: Ø320 mm – Ck45 - Cushion Cylinder Bore Diameter: Ø190 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 units - Approx. Press Height: 3800 mm - Approx. Press Width: 2950 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 13.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.