Orbitalinis Šlifavimas pirkti naudotą (4 015)

Būklė: geras (naudotas), Gamybos metai: 2003, Ref. No.: 10618 Manufacturer: KELLENBERGER Model: 600 U No. 33 Fodpfxeya Dagj Albspi Year of manufacture: 2003 Control type: Conventional Control system: n/a Location: Halberstadt Country of origin: Switzerland Distance between centers: 600 mm Center height (standard): 125 mm Center height with raised headstock and tailstock blocks: 175 - 250 mm Swing diameter with riser blocks, max.: 350 - 500 mm Table swivel (each side): 10° Table reversal dwell time: 0 - 5 sec Wheel diameter / width / bore: 250 x 13 x 76 mm Grinding spindle speeds: 1500 / 1700 / 2200 / 3600 rpm Grinding head swivel range: 360° Transverse travel of grinding head: 285 mm Rapid infeed and retraction of wheelhead: 40 mm Intermittent feed per table reversal: 0.001 - 0.03 mm/dia Micro-adjustment of feed, 1 division of dial: 0.001 mm / Ø Infinitely variable work speeds (normal / special): 20-400 / 10-400 Max. grinding length: 900 mm Additional information: The machine can be inspected under power.

Būklė: geras (naudotas), Gamybos metai: 1990, Ref. No.: 10301 Manufacturer: TITAN Model: RU 350 x 1-1500 Year of Manufacture: 1990 Control Type: Conventional Location: Halberstadt Country of Origin: USA Max. Grinding Length: 1,500 mm Fpedpfeycpv Ssx Albji Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Grinding Wheel Diameter: 280-500 mm Grinding Wheel Width: 80-100 mm

Būklė: paruoštas naudoti (naudotas), Įranga yra puikios būklės ir gali būti išbandyta vietoje. Priedai, įskaitant instrukcijas, yra komplekte. Techniniai duomenys – šlifavimo staklės Apdirbamo paviršiaus matmenys (mm): aukštis x ilgis x gylis 80 x 110 x 55 Variklio galia (kW): 0,5 Sūkių skaičius (min-1): 5000 Padavimas (mm/min): 150 Stalo apkrova (kg): 20 Valdymas: BOSCH Tikslumas: 0,005 mm, nuskaitomas per CNC, šlifavimas pagal šabloną 1:10, 1:20 arba 1:50, skirtas preliminariniam šlifavimui. Jei turite daugiau klausimų, mielai jums padėsiu. Fpedswvgidepfx Albji

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, Šlifavimo diskas krumpliaračiams šlifuoti, modulis - 3,74. Galima peršlifuoti kitam moduliui. Fjdpfoq Nmkxex Albepi

Būklė: geras (naudotas), Žievės nuėmimo staklės puikiai tinka tiek lapuočių, tiek spygliuočių medienai žievinti. Vežimėlis pagamintas iš sunkios plieninės konstrukcijos. 4 poros varomųjų ratų. Frezavimo svirtis pagaminta iš sunkios plieninės konstrukcijos. Hidraulinė frezavimo galvutė. Variklis 22 kW. Fjdetuyr Ispfx Albspi

Būklė: naudotas, Gamybos metai: 1980, Workpiece diameter 600 mm Workpiece weight 400 kg Workpiece height 300 mm Total power requirement 35 kW Machine weight approx. 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year of manufacture 1980 Serial No. 169371080 _____ Grinding range: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Table speed, steplessly variable: 20 - 80 rpm Swing diameter approx.: 800 mm Maximum grinding height above magnet: approx. 300 mm Vertical travel of grinding head: 220 mm Cross travel of grinding slide: 320 mm Maximum table load: 400 kg Automatic vertical feed: 0.01 - 0.2 mm/stroke Grinding spindle speeds, steplessly variable: 1,000 - 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive, max.: approx. 28 kW Fedpfx Alot Abrwsbjpi Total connected load: 35 kW - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment - Control panel mounted on the machine with adjustable stepless grinding spindle speed (potentiometer) with analog display of cutting speed in m/sec and ammeter - Stepless table speed, stepless cross feed speed of the grinding slide, and stepless vertical infeed of the grinding wheel with roughing/finishing/spark-out, each adjustable via potentiometer, as well as with a dressing cycle timer for switching rapid vertical traverse to the grinding slide intermittently - Hand control panel with push buttons for manual control of the machine, e.g. dresser forward/back, cross slide forward/back or crawl feed, vertical slide up/down or crawl feed - 2 preset counters for setting preliminary and finish sizes with automatic shut-off - Selector switch +1µ/-1µ, digital display of Y-axis - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and pre-settable dressing stroke - Fitted normal-pole magnet approx. 600 mm Ø - Separate free-standing electrical cabinet and separate small coolant pump Condition: Satisfactory to good – ready for demonstration under power / Ideal for tool room jobs, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Here is the link to the video: Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year 1980 Ser.-Nr. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing diameter approx.: 800 mm Table speeds, infinitely variable: 20 – 80 rpm Max. grinding height above table approx. ...

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Description to follow! Fodpfx Aoxy S D Solbepi

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Grinding length: 500 mm Grinding width: 200 mm O F F E R We can offer you the following from stock, subject to prior sale and errors: JUNG Universal Horizontal Surface & Profile Grinding Machine Model: HF 50 RD Year of manufacture: 1978 _____ Max. grinding length: 500 mm Max. grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel approx.: 350 mm Grinding wheel dimension: 225 x 25 x 51 mm Infinitely variable grinding wheel speed: 1,000 – 4,000 rpm Vertical feed: 0.001 – 0.01 mm/stroke Grinding spindle drive stepless, GS: 0.5 to 1.5 kW Total drive power approx.: 4 kW - 380 V – 50 Hz Weight approx.: 2,000 kg Accessories / Special features: • Thanks to the infinitely variable spindle speeds, this version is also suitable for grinding high-alloy tool steels. The grinding wheel diameter as well as the peripheral speed are set directly at the conversion cabinet. • Automatic grinding carriage feed for both surface and profile grinding operations, with • automatic feed cutoff via contact dial gauge • Automatic operation cycle – rough grinding, finish grinding, spark out – adjustable for all standard grinding processes with and without automatic feed, with continuous cross feed or with table reversal, plunge grinding and profile grinding without cross feed. • Rapid traverse for grinding head vertical adjustment, short-stroke function, fine cross feed • Digital readout for the Y-axis for precise positioning, especially for profile grinding. • Manual straight dresser mounted above the grinding wheel, separate radius dresser (DIAFORM dressing unit for profile dressing also available) • Built-in sine permanent magnetic chuck, 500 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and belt filter • Approx. 3 flanges with and without grinding wheels, balancing scale, operating manuals Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: HF50RD/4 Availability: Ex stock, immediate delivery possible, FCA Metzingen Payment: strictly net – after receipt of invoice Fodszbczrepfx Albepi Always a large selection of grinding machines in stock – please submit your enquiry!

Būklė: naudotas, Gamybos metai: 2006, Offer in progress! Fedpfx Alswftufsbspi

Būklė: naudotas, Gamybos metai: 1981, x-travel: 650 mm y-travel: 450 mm Workpiece height: 585 mm Control: ADCOS CNC 400 Fpsdpfx Ajt Hw S Uolboi Total power requirement: 15 kW Machine weight approx.: 5000 kg Space requirement approx.: m H A U S E R (Switzerland) CNC-controlled double-column coordinate grinding machine Model: S 40 – CNC 311 / ADCOS 400 CNC Year of manufacture: 1981 / modernised in 2008 #0125 Table size approx.: 630 x 770 mm Table load capacity approx.: 500 kg Table longitudinal travel max. (X): 650 mm Grinding head cross travel max. (Y): 450 mm Vertical adjustment of cross beam max. (W): 500 mm Grinding spindle stroke max. (Z): 140 mm Grinding head stroke rate (4Hz): 0.5–12 m/min Vertical clearance between table/spindle: 0–585 mm Clearance between columns: 750 mm Taper grinding max.: 16° Grinding diameter (bore): approx. 230/360 mm 18 spindle speeds, infinitely variable depending on spindle motor: 4,500–80,000 rpm Fine feed rates in X and Y axes and W axis: 0.5–1,500 / 3,000 / 800 mm/min Planetary rotation speed (C-axis): 5–250 rpm Total drive approx.: 15 kW – 400 V – 50 Hz Machine weight approx.: 5,000 kg Accessories / special equipment: • CNC path control replaced in 2007 with an ADCOS CNC control, model CNC 400, with large screen and direct programming at the control panel, with electronic handwheel for fine adjustment of axes: X = table longitudinal, Y = grinding head cross, Z = quill vertically/stroke, C = rotary axis spindle/quill, U = automatic feed, W = cross beam vertical adjustment • Z-axis as rapid traverse for shorter machining times, plunge grinding, face grinding, preselection of reversals (approach + teach-in), and continuously variable stroke speed, acting as a 3rd positioning axis • U-axis as manual and controlled feed axis (radial), at the grinding head, with electronic display of infeed amount • 1 grinding motor built in with spindle speed approx. 30,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • Separate coolant system with belt filter, electrical control cabinet and switch cabinet free-standing, separate hydraulics, central lubrication, dust extraction, and much more Condition: very good, demonstration-ready under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1987, x-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 485 mm Control: ELESTA CNC 314 Total power requirement: 10 kW Machine weight approx.: 4,000 kg Space requirement approx.: [please specify dimensions] m H A U S E R (Switzerland) CNC controlled coordinate grinding machine Model: S 3 – CNC 314 Year of manufacture: 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx.: 600 x 380 mm Table load capacity approx.: 300 kg Maximum longitudinal table travel (X): 400 mm Maximum cross table travel (Y): 250 mm Maximum vertical adjustment of grinding slide (W): 450 mm Maximum grinding spindle stroke (Z): 120 mm Grinding head stroke, hydraulic: 15 - 7,500 mm/min Installation height table/grinding spindle min./max.: -75 / +485 mm Grinding spindle overhang: 350 mm Maximum angular grinding: 16° Maximum bore grinding diameter approx.: 230 mm 18 spindle speeds, depending on spindle motor Continuously variable: 4,500–80,000 rpm Planetary rotation speed (C), continuously variable: 5–250 rpm U-axis, radial feed: 6 mm Total drive approx.: 10 kW - 380 V – 50 Hz Machine weight approx.: 4,000 kg Accessories / Special Features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor for 4 axes (=XYC+U-axis), interpolation in 2.5 dimensions (XYC). Fpedpfx Aet Hw Txjlbji The U-axis is a feed axis and is not interpolatable. Teach-in programming directly on the machine, with various subprograms, as well as manual movement of the axes at the control panel or with electronic hand unit. Separate digital readout for Z-axis • U-axis as manual and controlled radial feed axis at the grinding head, with digital readout of feed size • 2 grinding motors #5674 and 3980 up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact monitoring device KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system • Free-standing coolant system with belt filter, separate hydraulic unit and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock, as inspected Payment: strictly net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal -extra large- Thread and Worm Grinding Machine Model ULG 46 Year 1986 Grinding length 900 mm Max. workpiece clamping length 1,190/1,400 mm Workpiece Ø / thread Ø, min./max. 10 – 460 mm (!) Length adjustment of workhead on table 210 mm Max. workpiece weight approx. 100 kg Work spindle bore approx. 65 mm Lead range for single-rib wheels 0.3 – 100 mm Max. module 10 Max. lead angle +/- 40 ° Grinding wheel dimensions, Ø x width 350 x 20/40 mm Relief grinding size 0.03 – 8 mm Presettable number of flutes 2 – 10, 12, 14 and 16 27 workpiece speeds 0.4 – 160 rpm Infinitely variable grinding wheel speeds 72 – 2,500 rpm Spindle drive approx. 10 kW * Total electrical load approx. 25 kW – 400 V – 50 Hz Weight approx. 8,000 kg Accessories / Special Features: • The machine was originally built with an increased center height for a max. workpiece swing of 460 mm, allowing thread work on larger workpieces and housings (aerospace industry)! • Internal thread grinding attachment with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-rib grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of the grinding carriage for the return of the workpiece slide • Relief grinding attachment with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple manual dressing devices for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, several coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate control cabinet for adjustment of various grinding cycles • Lift-off safety hood over the working area, monitored by electric switches, etc. There is no coolant unit available, but there is a connection for a central coolant supply with valve control, along with a separate coolant chiller and a separate stand-alone dust extraction unit. Fjdpfet H Smtox Albjpi

Būklė: naudotas, Gamybos metai: 1985, Grinding length: 600 mm Grinding width: 200 mm Total power requirement: 7.5 kW Machine weight approx. 2.3 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock on a non-binding basis: JUNG Horizontal Precision Surface & Profile Grinding Machine with Microprocessor Control Model: JF 520 MS Year of manufacture: 1985 2225 ----- Max. grinding length (table longitudinal travel): 600 mm Max. grinding width (cross travel): 200 mm Max. grinding height under the wheel approx.: 230 mm Max. distance table to spindle centre: 500 mm Magnetic chuck size: 500 x 200 mm Max. table load: 100 kg Table speed: 1 – 24 m/min Table speed, creep grinding: 5 – 450 mm/min Max. table cross feed: 1,000 mm/min Max. vertical feed grinding head: 500 mm/min Grinding wheel dimension: 250 x 25 x 50.8 mm Max. peripheral speed (ceramic): 35 m/s Grinding spindle speed, infinitely variable: 800 – 4,200 rpm Grinding spindle drive approx.: 5 kW Total connected load: approx. 7.5 kW - 400 V - 50 Hz Weight: approx. 2,300 kg Accessories / Special Equipment: Fsdpfx Aljwd Tx Uebspi • Microprocessor program control (SIEMENS) with easy screen display. The program sequences are set via decade switches and stops (with vernier) and monitored on the screen. • Programs: plunge grinding with/without cross positioning, surface grinding with step-over or continuous cross feed, creep feed grinding upcut or downcut with/without cross positioning. All programs with automatic roughing, finishing, spark-out cycles, and automatic retraction. • Automatic straight line dressing device AF 65 S with automatic dressing value compensation and automatic speed adjustment for constant cutting speed (with display) • DIAFORM – grinding wheel profiling device mounted above the grinding wheel • Electrically controlled creep feed device with feed rate and motor load display • Short stroke device for controlling table reversal and table clamping (cross) • Swivelling JUNG sine magnetic chuck, 450 x 180 mm, mounted. Separate swivelling sine magnetic chuck 350 x 175 mm, fine-pole with stop • Coolant system with paper band filter, additional accessories, operating manual Condition: Very good condition with accuracy protocol by JUNG technician! Please click here for a video of the machine: Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net - upon receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Swing diameter 400 mm O F F E R We can offer you, subject to prior sale and error, ex-stock and without obligation: WMW - GLAUCHAU Universal internal cylindrical grinding machine with face grinding attachment Model: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with/without chuck guard: 500 / 600 mm Center height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swivel range, max.: 30° Workpiece headstock cross movement, max.: 400 mm Grinding spindle slide longitudinal infeed: 70 mm Grinding spindle slide cross infeed, approx.: 100 mm Grinding head infeed, interval mode: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table travel, max.: 630 mm Table speed, steplessly variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle slide travel on table: 520 mm Grinding spindle drive power, approx.: 7.5 kW Total connected load: approx. 17 kW – 380 V – 50 Hz Weight, approx.: 6,000 kg Fodpfx Aloxyllvjbjpi Accessories / special equipment: • Universal internal grinding spindle unit with program-controlled cycles for grinding cylindrical and tapered bores with single or multiple diameters, external cylindrical grinding and narrow face grinding • Face grinding attachment, hydraulically swiveling, with automatic cycles for grinding single and multiple faces as well as stepped faces simultaneously • Electronic program control with large operator panel including ammeter for both grinding spindles • Belt-driven grinding spindle unit with built-in spindle and 5 separate, exchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at workpiece headstock • HEIDENHAIN digital readout for cross adjustment of the workpiece headstock • Comprehensive accessories including 4-jaw face plate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel arbors, foot switch • Separate hydraulic unit, attached control cabinet, coolant device with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net, after receipt of invoice

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Description to follow! Fpodpeyrtwxefx Albji

Būklė: naudotas, Gamybos metai: 2011, Workpiece diameter: 320 mm Thread length: 570 mm Thread pitch: 315 mm Fsdpfx Aot Hxbdolbspi Total power requirement: 17 kW Machine weight approx.: 12 t Space requirements approx.: O F F E R We can offer you, subject to prior sale and errors excepted, from stock without obligation: M I K R O M A T Universal Thread and Worm Grinding Machine Type GSU 320/1 PC, Year of manufacture 2011, fully reconditioned #2319.01.27 _____ Max. / Min. Grinding diameter: 3 – 320 mm Max. grinding length (grinding wheel width 50 / 8 mm): 520 / 570 mm Between centers: 1,000 mm Max. workpiece weight: 160 kg Workpiece spindle bore: 40 mm Pitch range min./max.: 0.25 - 315 mm Max. pitch angle: + / - 40° Max. profile size: Module 20 Automatic radial division device: 2/3/4/5/6/8/10/12/15/20/24/30/40/60 Relief grinding stroke: 0 - 6 mm Plunge-cuting depth: 0 - 6 mm Workpiece speed: 0.125 - 100 rpm Rapid return: 2 m/min Grinding wheel Ø x width x bore: 500 x 60 x 203 mm Max. grinding wheel speed: 1,595 rpm For dressing/rolling-in: 12 - 32 rpm Spindle drive approx.: 6.5 kW Total drive: 17 kW - 380 V - 50 Hz Weight: 9,500 / 12,000 kg Accessories / Special equipment • The machine was purchased as a fully overhauled and electronically modernized (new) machine directly from the manufacturer MIKROMAT in 2011! • Universal machine for automatic grinding of single- and multi-start worms and threads with straight and curved flanks using single- or multi-profile grinding wheels. • Longitudinal grinding, relief grinding, plunge-cut grinding, groove grinding, and taper grinding can be executed via simple cycle guidance on the SCHLEICHER PLC control PROMODUL U. Feed and compensation are automatic. Cam templates required for relief and taper grinding; dividing is achieved by change gears! • Manual dressing device for profiling single-profile grinding wheels, left and right flanks • Non-driven steel infeed rolling device for installation above the grinding wheel • Open steady rest for mounting on the grinding table and closed 3-point steady rest • Workpiece driver device in the spindle with various centers and workpiece arbors • Hand division device for circumferential division for mounting on the workpiece spindle • Large assortment of change gears, further accessories and various spare parts, operating manuals • High-end KNOLL coolant band filter system HL650/1500 with HYFRA cooling unit Condition: very good, ready for demonstration – Delivery: immediately from stock, as inspected. Payment: strictly net after receipt of invoice. We look forward to your order. We always have thread grinding machines in stock—please let us know your requirements!

Būklė: naudotas, Gamybos metai: 2000, Grinding length 1600 mm Grinding width 600 mm Workpiece height 500 mm Total power requirement 50 kW Q U O T A T I O N We are pleased to offer you, subject to prior sale and errors, ex stock: B L O H M CNC-controlled precision surface grinding machine Model PLANOMAT 616 with SIEMENS 840 D control Year of manufacture 2000 Serial no. 14 67x _____ _____ Grinding area 1,600 x 600 mm (!) Table dimensions 2,000 x 600 mm Fpodpfx Aljt Hxcbjboi Working height under grinding wheel approx. 150 – 500 mm Max. longitudinal table travel X 1,700 mm Max. vertical movement of upper carriage Y 550 mm Max. cross movement of upper carriage Z 560 mm Max. workpiece weight approx. 800 kg Table speed X-axis 30 – 30,000 mm/min Min. cross feed Z-axis 0 – 4,000 mm/stroke Vertical feed Y-axis 0.001 – 0.099 mm/stroke Y/Z axis feed rate 4 – 4,000 mm/min Grinding wheel Ø x width approx. 400 x 100 mm Infinitely variable grinding wheel speed via GS motor 300 – 1,250 rpm Spindle drive max. approx. 27.5 kW Total power requirement approx. 50 kW - 400 V – 50 Hz Total weight approx. 10,000 kg Accessories / special equipment: • SIEMENS CNC control 840 D with screen; SIEMENS components, WINDOWS interface Model MMC 103/PCU 50, operator guidance for direct entry of all grinding parameters, including roughing/finishing/spark-out cycles, slot grinding with (cross-) indexing device, automatic shut-off upon reaching grinding depth and return to home position, grinding wheel management, dressing programs/cycles, hand-held remote, etc. • All axes driven by ballscrews, DITTEL contact control • Infinitely variable grinding spindle speed via direct GS motor • Table-mounted diamond wheel dressing unit type PEA, electrically driven, with DITTEL gap control device, and separate straight dresser with diamond fleece and compensation; dressing cycles integrated in the control • Fitted magnetic chuck approx. 500 x 1,500 mm, make WAGNER, with demagnetising device • Attached electrical cabinet, separate flanges with wheels, separate oil mist extractor, complete work space enclosure with sliding door and glass insert • Large HOFMANN coolant system TECHNOPUR S 300 with cooling unit and grinding sludge conveyor, tank 1,600 l or 1,280 l, separate oil mist extraction, etc. Condition: Good to very good – soon ready for demonstration, extremely large and stable machine (!) Delivery: Ex stock – as inspected Payment: Strictly net – upon receipt of invoice We look forward to receiving your order. Further grinding machines of all types in stock. Please inquire.

Būklė: naudotas, Gamybos metai: 1969, Rotary table diameter: 1000 mm Grinding height: 500 mm Grinding head drive power: 15/5.5 kW Total connected load: 30 kW Machine weight approx.: 18 t Space requirement approx.: [not specified] m S I E L E M A N N Vertical Rotary Table Surface and Internal Grinding Machine with 2 Grinding Heads Model RFsB 100 #8185 Year of construction: 1969, completely overhauled by manufacturer in 1990 _____ Rotary table – face plate diameter – Ø: 1,000 mm Distance from table center to column approx.: 1,150 mm Mounting height table/grinding heads approx.: 500 mm Workpiece height approx.: 400 mm Overhang of grinding heads approx.: 500/700 mm Max. workpiece weight approx.: 900 kg Table rotation speeds, hydraulically variable, right/left (14.5 kW): 5–60 rpm Table longitudinal stroke approx.: 550 mm Table infeed (internal/external grinding): 0.0025 – 0.025 mm/stroke Table oscillation stroke/feed (creep feed 0.2 m): 0.2 – 1,000 mm/min Table dwell time at stroke reversal: 0-10 sec. Fjdpfxeu Su Apj Albspi Grindable bore diameters approx.: 0 – 900 mm Grinding slide stroke for both heads approx.: 500 mm Internal grinding spindle diameter max.: 140/100 mm Surface grinding head diameter (segment wheel): 450 mm Motor drives for surface and internal grinding heads: 15 /5.5 kW Total drive approx. 30 kW – 380 V/50 Hz Weight approx. 18,000 kg Accessories/Special Features: • The rotary table rotates with the workpiece and also performs the infeed motion • The corresponding grinding head is swiveled in by rotating the column (with hydraulic lifting), so the workpiece can be machined in a single clamping with precise angular positioning • Additional height adjustment on the internal grinding slide by approx. 150 mm • Digital display of grinding wheel speeds • Grinding wheel dressing devices mounted on the grinding column, or can be manually swung in • Separate hydraulic unit * Separate control cabinet * • Magnetic face plate with infinitely variable holding force adjustment, various small parts • Currently no coolant system installed The machine is ideal for grinding heavy and irregularly shaped workpieces, gears, ball bearings, housings and circular knives, and is very universal and highly precise for other grinding tasks. Condition: Good – will soon be ready for demonstration. A video is available here: Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A wide range of other grinding machines always in stock – please contact us for details. Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and horizontal workpiece clamping Model RFsB 100

Būklė: naudotas, Gamybos metai: 1974, Stalo skersmuo mm Ruoinio aukštis mm Diskų skaičius 2 Bendras elektros galingumas 8 kW Mašinos svoris apie 4,2 t Reikalinga vieta apie m P A S I Ū L Y M A S Galime Jums pasiūlyti iš sandėlio, su išlyga dėl klaidų ir tarpinio pardavimo, nesaistomai pasiūlyti: HAHN & KOLB Dvipusė lyginimo ir tikslaus šlifavimo staklės Modelis ZL 800 H Pagaminimo metai apie 1974 240 024 _____ Fjdpfx Aleub Alzebepi Lyginimo/šlifavimo diskų skersmuo galimas 755 - 810 mm Disko žiedo plotis galimas 200 - 265 mm Šiuo metu sumontuotas diskų Ø / žiedo plotis 790 / 245 mm Maks. ruoinio transportavimo disko Ø apie 306 mm Maks. atstumas tarp ketaus lyginimo diskų 125 mm Maks. atstumas tarp tikslaus šlifavimo diskų 83/78 mm Maks. atstumas tarp tvirtinimo flanšų 260 mm Viršutinio lyginimo disko apsukos 30 / 42 / 60 / 84 aps./min Apatinio lyginimo disko apsukos 30 / 42 / 60 / 84 aps./min Ruoinio transportavimo disko centrinis pavara 28 / 40 / 56 / 80 aps./min Veleno pavara kiekvienam 6 / 8 kW Bendra variklio galia apie 11 kW - 380 V - 50 Hz Svoris apie 4 200 kg Papildoma įranga: • HAHN & KOLB / LAUER matavimo ir valdymo įranga su per tuščiavidurį veleną vedamu jutikliu. Jutiklis nuolat matuoja darbo proceso metu ir pasiekus nustatytą storį automatiškai baigia ciklą. • HELLER hidraulinės sistemos slėgio pakopų reguliavimas ir laiko jungiklio valdomų šlifavimo fazių nustatymas. • Mašina šiuo metu aprūpinta tikslaus šlifavimo diskais labai tiksliam dvipusiam plokščių, lygiagrečių ruoinių šlifavimui. • Šoninis, aukščio reguliuojamas ir įsukamas automatinis disko nuėmimo / išradiusiavimo įrenginys su elektriniu padavimu. • Lyginimo arba skalavimo skysčio dozavimo įrenginys su talpa. • Daugybė pavaros ir slėgio nustatymo variantų: sinchronizuotas / priešpriešinis veikimas, atskiras pavara, vieno ar abiejų diskų vilkimas, kairė/dešinė eiga ir kt. • Motorizuotas aukščio reguliuojamas planetinis transporterio diskų pavara. Būklė: dar neeksploatuota, perkant „kaip yra“ galimas ypatingas pasiūlymas. Pristatymas: iš sandėlio, galimas iš karto, FCA Metzingen Apmokėjimas: išskirtinai grynais po sąskaitos gavimo Mūsų sandėlyje turime daugiau dvipusių lyginimo ir tikslaus šlifavimo staklių, teiraukitės.

Būklė: naudotas, Gamybos metai: 1980, Wheel diameter – max. 2,500 mm Wheel width 1,200 mm Module – max. 32 Module – min. 3 Total power requirement 25 kW Machine weight approx. 60 t Space requirement approx. __ m Year of manufacture: 1980 Overhauled: 1990 Wheel Ø min./max. 180 – 2,500 mm Module 3 – 32 Maximum helix angle 10 – 35° Wheel width for spur gearing 1,200 mm Stroke length approx. 100 – 1,200 mm Number of strokes 80 – 350 strokes/min Adjustable stroke position 300 mm Stroke speed 4–40 m/min Max. workpiece weight approx. 18,000 kg Max. number of teeth 16–576 Table size Ø x bore 1,400 x 500 mm Grinding wheel Ø approx. 500 mm Grinding wheel peripheral speed 34 m/s Total drive approx. 25 kW – 380 V – 50 Hz Weight approx. 15 t Accessories / Special features: • Hydrostatic guides on the grinding slide, table, and all other guideways • Complete grinding enclosure with sliding doors • Automatic grinding cycle in multiple passes as well as settings for roughing, finishing, fine finishing, and automatic dressing cycle after preset number of teeth Fpedpfxst Hwqqe Albsi • Profile correction possible by corresponding dressing and additional movement of the grinding slide (crown and flank correction in height and side) • Approx. 50 change gears, angle measuring device • Large coolant system with band filter and oil mist extraction • Separate control cabinet, separate hydraulic unit, separate oil cooling system

Būklė: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 250 mm Workpiece height mm Control system CNC 314 ELESTA Total power requirement 15 kW Machine weight approx. 5500 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Type S 3 – CNC 314 Year of manufacture approx. 1990 # S 32086 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Table travel longitudinal max. (X) 400 mm Table travel cross max. (Y) 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head slide stroke, hydraulic 15 – 12,000 mm/min Height between table and grinding spindle min./max. -75 / +485 mm Projection of grinding spindle 350 mm Conical grinding max. 16° Grinding Ø, bore max. approx. 230 mm 18 spindle speeds, depending on spindle motor steplessly adjustable 4,500–80,000 rpm Planetary speed (C), steplessly adjustable 5–250 rpm U-axis, radial infeed 6 mm Total drive approx. 15 kW – 400 V – 50 Hz Weight/Total weight approx. 4,000 / 5,500 kg Accessories / Special equipment: • CNC path control system type CNC 314 (ELESTA –POSELESTA II) with monitor, for 4 axes (=X Y C + U-axis), with circular and linear interpolation in 2 ½ dimensions (X Y + C). Teach-in programming directly on the machine. Error messages, RS 232 interface with various subprograms, as well as manual axis movement via control panel or with electronic hand-held unit. • Separate digital readout for the Z-axis, Z-axis with rapid traverse device • Programmable C-axis for simple contours and pockets, grinding of radii • U-axis as manual and controlled infeed axis, radially mounted on the grinding head with digital readout, automatically grinds varying bore diameters • 2 grinding motors up to a spindle speed of 80,000 rpm Fodjt Hxcnepfx Albepi • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system Krafft Buer • Separate coolant system with band filter, separate hydraulic unit with cooler • Separate electrical cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: very good / demonstration-ready under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1975, Workpiece diameter 125 mm Grinding depth 50 mm Clamping length 2000 mm Total power requirement 0.5 kW Fpedpfx Asvanrcolbsi Machine weight approx. 1000 kg Required floor space approx. m O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: T E C H N I C A (Switzerland) Vertical Centre Hole Grinding Machine Model ZSM 5100 - 2000 Year of manufacture approx. 1975 Serial no. 66 32 7872 _____ Distance between centres: 50–2,000 mm Workpiece diameter: 8–125 mm Swing over tailstock centre/bedway: 290 mm Swing over vice/grinding head column approx.: 300 mm Workpiece weight approx.: 250 kg Max. centre hole taper diameter: 2–50 mm Max. centre hole taper angle: 60° Clamping range of vice: approx. 4–150 mm Vertical stroke of grinding head, coarse adjustment: 130 mm Fine feed of grinding pin via handwheel: 0.01–1 mm Grinding pin diameter: 20–60 mm Grinding spindle speeds, depending on pulley: 13,000 – 45,000 rpm Workpiece drive: 0 rpm Total drive approx.: approx. 0.5 kW 400 V - 50 Hz Weight approx. 1,000 kg Accessories / Special equipment: - The machine has been extended with a bolted base to a length of 2000 mm! - On this machine, the grinding pin rotates around a parallel, offset axis, thus generating a planetary motion along the hollow taper surface to be ground at the workpiece centre. - Manually height-adjustable centring stock with carbide inserts and tailstock, featuring manual clamping and centring of the workpiece. - Manually operated dressing device mounted laterally to the grinding spindle, stroke approx. 40 mm, with additional pendulum motion for precise conical shaping. - Pneumatic oil mist lubrication of the grinding spindle. - Fold-down workpiece pre-centring device. - Manually height-adjustable tailstock and recess in machine base for longer workpieces; however, the tailstock is without workpiece drive. Condition: good – ready for demonstration – current new price at least approx. €80,000. Rare machine! Video available at this link: Delivery: ex stock – as inspected Payment: Net cash – on receipt of invoice, before delivery We look forward to receiving your order. More centre hole grinding machines available.

Būklė: naudotas, Gamybos metai: 1998, Grinding length 2000 mm Grinding width 600 mm Total power requirement 17 kW Machine weight approx. 10 t O F F E R We are pleased to offer you, subject to prior sale and error, from our stock and without obligation: GEIBEL & HOTZ CNC Cycle Controlled Surface & Profile Grinding Machine Model FS 2060 - GT SL Year 1998 Serial No. 1013220998 _____ Max. grinding length (max. table longitudinal movement 2,050 mm) 2,000 mm Max. grinding width (max. cross movement 600 mm) 600 mm Max. grinding height under wheel approx. 600 mm Distance table – spindle center min./max. 180 – 800 mm Table size 2,300 x 550 mm Magnetic chuck size 2,000 x 600 mm Max. table load 3,110 kg Table speed 0 – 35 m/min Fpsdov S Ip Ejpfx Albei Cross movement intermittent 0.5 – 60 mm/stroke Cross feed / rapid traverse 0 - 4,000 mm/min Grinding wheel dimensions, standard 400 x 100 x 127 mm Grinding spindle speeds, stepless 1,000 – 3,000 rpm Grinding spindle drive approx. 11 kW Total drive approx. 25 kW - 400 V – 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • Dialog-guided GEIBEL & HOTZ automatic grinding cycle control Type SL for 3 axes. Graphically supported data input in absolute values or via teach-in method in pre-programmed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and clear monitoring of axis movements and work progress. • Electronic handwheel for 3 axes X, Y, Z, selectable feed rate 0.01 / 0.1 / 1 mm/rev. • Table movement via roller ring threaded drive (GT), allowing very high and very low table speeds with constant torque and very high efficiency. • Cross and vertical movements via ball screw drive with incremental glass scale. • Single-grain diamond dresser mounted on the table. (Machine was previously equipped with an electronic straight dressing unit EGA 100, which is currently not present.) • MPM fully automatic balancing device AB 100 (the flange-mounted sensor is currently missing). • Built-in fine-pole electromagnetic chuck 2,000 x 600 mm with adjustable holding force • Wet grinding system with universal paper band filter unit UPF 100 with magnetic separator • Fully enclosed work area with electrically monitored sliding doors • Separate switch cabinet, separate mobile operating panel, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here soon for a video of the machine: Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - after receipt of invoice

Būklė: labai geros būklės (naudotas), Description to follow! Fpsdpfxew U U Ike Alboi

Būklė: naudotas, Gamybos metai: 1999, Grinding diameter: 360 mm Grinding length: 650 mm Centre height: 180 mm Control: SIEMENS 840 D Total power requirement: 15 kW Machine weight approx.: 9500 kg Space requirement approx.: [not specified] KARSTENS CNC-controlled external cylindrical grinding machine Type K 52 - 650 (98 019 06 52051) Year of manufacture: 1999 Fodpjt Hw A Hefx Albopi Centre height: 180 mm Centre width / Max. clamping length: 750 mm Max. grinding length: 650 mm Grinding length for plunge grinding: 150 or 210 mm External grinding diameter min./max.: approx. 5-360 mm Max. grinding width for plunge grinding: 150 mm Max. workpiece weight between centers/floating: 250/70 kg Grinding wheel dimensions (diameter x width x bore): 600 x 150 x 203 mm Cutting speed, steplessly adjustable up to: 35/50 m/sec Grinding slide travel (X-axis): 360 mm Grinding slide feed: 0.01 – 6,000 mm/min Workpiece headstock (MK4) - spindle speeds (C-axis), stepless: 1–1,000 rpm Table speed (Z-axis): 0.01 – 10,000 mm/min Feedback system resolution: 0.0002/0.0005 mm Spindle drives: 11/15 kW * Total drive approx. 30 kW - 400 V - 50 Hz Weight approx.: 9,500 kg Accessories / Special features: - Granite machine base with all technical and thermal advantages - SIEMENS CNC control Type 840 D with software and subprograms - Manual control unit - MOVOMATIC measuring control Type ES 400 with hydraulically retractable measuring bracket - Grinding slide set to 0° – ideal for straight plunge grinding - Grinding wheel mounted on the left side, extra wide up to 210 mm - Fixed workpiece headstock or flange driver - Tailstock on sub-slide with approx. 50 mm stroke, hydraulically operated with quill correction - Powered diamond disk profiling device for CNC profiling of the grinding wheel - Wheel balancing device on the machine - The machine is currently equipped with a HEILIG loading gantry which automatically loads/unloads cylindrical workpieces approx. 30 x 100 mm into/out of the work zone - Simultaneous handling of raw and finished parts with double gripper - Separate hydraulic unit, DEMAG chain hoist for easier grinding wheel change - Complete machine enclosure with manually lockable and electronically monitored doors - No coolant system, but intermediate tank for central supply Condition: good – ready for demonstration soon – ideal machine for plunge grinding operations Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We have a wide selection of all types of grinding machines, please enquire with us.