Kraussmaffei Km 350-2700 C2+ pirkti naudotą (17 865)

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Ncedeuiykdjpfx Afaju

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Two Krauss Maffei injection moulding machines available: 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions (L/W/H): approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control system: MC4, operating hours: approx. 86,000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions (L/W/H): approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control system: MC4, operating hours: approx. 82,000h. Documentation available. Inspection on site possible. Nedpsw Emybsfx Afaocu

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Ncjdpfx Aeymn Rvefaju Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 50 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, įpurškimo slėgis: 1 795 juosta, atvērimo eiga: 2 100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Clamping plate dimensions (h x v): 1,600 x 1,550 mm Clear space (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/reverse: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Njdpfx Asyv Acmofaecu Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Operating hours: 50,000 h EQUIPMENT Oscillation elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen 20 x hot runner control zones Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Naudota mašina Liejimo mašina Gamintojas: Krauss Maffei KM 80 C1 Gamybos metai: 2000 Liko tik 1 mašina sandėlyje Nėra pristatymo laiko, galima pristatyti iš karto Apžiūra galima tik iš anksto susitarus Mašina nėra prijungta prie elektros / nėra aušinimo vandens jungties Mašina tinkamai sandėliuota Techniniai duomenys: Uždarymo jėga: 800 kN Tvirtinimo plokštė: 610×610 mm Kolonų atstumas: (nenurodytas) Įmontavimo aukštis: 250 mm Plokščių atstumas: 750 mm Valdymas: MC4 Ekrano kalba: vokiečių (keisti negalima) Įpurškimo vienetas: Sraigto skersmuo: 45 mm Įpurškimo slėgis: 1878 bar Eigos tūris: 275 cm³ Siurblio variklio galia: 18,5 kW Nsdpfx Aju Ti Srofascu Šildymo galia: 13 kW Alyvos kiekis: 270 l Matmenys: 4,3 x 1,4 x 2,1 m Bendras svoris: 3,2 t Daugiau nuotraukų – pagal užklausą.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) Njdpfxoud H Dmj Afascu - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100 Ncedpjuggb Defx Afaou  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 Nedpfxew U N Ixe Afaecu - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine Type: KM 650 – 8000 CM Year of Manufacture: 1997 Operating Hours: 80,000 h Control System: MC 3-F Screen Language: German Location: D-52249 Eschweiler Clamping Unit: Clamping Force: 6,500 kN Max. Mold Opening Force: 346 kN Moving Platen Opening Force: 169 kN Njdpoub S R Hofx Afaocu Moving Platen Closing Force: 144 kN Mounting Plate (H x V): 1704 x 1700 mm Clearance Between Tie Bars (H x V): 930 x 930 mm Mold Opening Stroke: 1,150 mm Min. Mold Installation Height: 600 mm Daylight: 1,750 mm Ejector Stroke: 250 mm Ejector Force fwd/back: 226 kN Injection Unit: Screw Diameter: 130 mm L/D Ratio: 20 Injection Pressure: 1,296 bar Shot Volume: 6,172 cc Shot Weight (PS): 5,617 g Injection Flow Rate: 1,540 cc/s Screw Speed: 138 rpm Plasticizing Rate: 238 g/s Nozzle Contact Force: 246 kN Electrohydraulic Equipment: Rated Pump Motor Power: 132 kW Installed Heating Capacity: 70 kW Cylinder Heating Zones: 7 Dimensions and Weight: Space Requirement approx.: 12.00 x 2.80 x 2.70 m Total Weight: 43,000 kg Accessories: - Vibration dampers Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on moving platen (BFAP) - 2 x hydraulic core pulls on fixed platen (FFAP) - 8 x hot runner control zones - Robot interface as per Euromap 67

Būklė: naudotas, Gamybos metai: 2006, Liejimo mašina Krauss Maffei KM 800-4300 MX, 2006 m. Ncsdpfx Asw Hwr Dsfaou Mašina komplektuojama taip: - 5 hidraulinės kaskadinės valdymo sistemos - Įpurškimo agregatas su 90 - MT5 valdymo sistema - Krauss Maffei tvarkymo sistema - 2 konvejeriniai juostos

Būklė: naudotas, Gamybos metai: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Ncjdew Hwthopfx Afasu

Būklė: naudotas, Gamybos metai: 1999, Parduodama Krauss-Maffei 800/5700MC liejimo mašina, pagaminta 1999 m. Techniniai duomenys pagal užklausą. Nodpfsyg Hbgjx Afajcu

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 105 mm, tarpas tarp stulpų: 1 400 mm, darbinio tūrio: 4 546 cm³, įpurškimo slėgis: 1 778 juosta, injekcijos svoris: 4 137 g, Uždarymo jėga: 950 kN Didžiausia formos atidarymo jėga: 665 kN Judamos platformos atidarymo važiavimo jėga: 112 kN Judamos platformos uždarymo važiavimo jėga: 117 kN Tvirtinimo plokštė (plotis x aukštis): 1960 x 1710 mm Laikymo atstumas (plotis x aukštis): 1400 x 1150 mm Formos atidarymo eiga: 1800 mm Min./maks. formos montavimo aukštis: 600/1200 mm Atidarymo plotis: 2400 mm Įpurškimo mazgas: Sraigto skersmuo: 105 mm Ls/D santykis: 23 Įpurškimo slėgis: 1778 bar Smūgio tūris: 4546 ccm Įpurškimo svoris (PS): 4137 g Įpurškimo debitas: 805 ccm/s Sraigto apsukų dažnis: 126 1/min Plastifikacijos srautas: 147 g/s Antgalio spaudimo jėga: 166 kN Nsdpfxex Hz I Ns Afascu Elektrohibridinės įrangos duomenys: Vardinė siurblio variklio galia: 110 kW Įdiegta šildymo galia: 59 kW Cilindro šildymo reguliavimo zonos: 7 Alyvos kiekis: 1500 l Matmenys ir svoris: Reikalinga erdvė apie: 12,00 x 3,50 x 3,00 m Bendras svoris: 67 000 kg Maksimalus formos svoris: 20 300 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 68 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, Clamping force: 1600 kN Max. tool opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clear daylight (h x v): 520 x 520 mm Mould opening stroke: 650 mm Minimum mould installation height: 300 mm Opening width: 950 mm Ejector stroke: 150 mm Ejector force (forward/back): 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Nsdpfx Aeydp D Esfaocu Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 ltr. Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mould weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional equipment: - 1 x air valve - 2 x core pulls - Robot interface according to Euromap 67

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 25 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 500 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8,500 kN Maximum mold opening force: 560 kN Moving platen opening force: 153 kN Moving platen closing force: 117 kN Clamping platen (H x V): 1,600 x 1,600 mm Clear width (H x V): 1,140 x 1,140 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Opening distance: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow rate: 690 cc/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated power of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Vibration dampers Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-circuit water manifold Nodpfx Ajyb Sx Hefaocu - Robot interface to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 6500 kN Maximum tool opening force: 346 kN Moving platen travel force opening: 169 kN Moving platen travel force closing: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clearance between tie bars (H x V): 1000 x 930 mm Mould opening stroke: 1150 mm Minimum mould installation height: 600 mm Maximum opening width: 1750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95 kN Injection unit: Screw diameter: 95 mm Ls/D ratio: 23 Nodpfx Afjx Hzzceascu Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electro-hydraulic equipment: Pump motor rated power: 90 kW Installed heating capacity: 50 kW Number of cylinder heating control zones: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration mounting elements - Krauss Maffei Robot LR300 X-axis: 1200 mm, servo-driven Y-axis: 1000/1000 mm, telescopic, servo-driven Z-axis: 3500 mm, servo-driven C-axis: 0–90° pneumatic - Conveyor belt - Safety guarding Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner controllers - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 58 670 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 45 mm, darbinio tūrio: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clearance between tie bars (h x v): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force, forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 cc Shot weight (PS): 289 g Injection flow rate: 143 cc/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Nodpfx Ajydp Idefajcu Cylinder heating control zones: 5 Oil capacity: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, veikimo valandos: 35 000 h, Funkcionalumas: visiškai funkcionalus, Krauss-Maffei KM 1150/4300 MX Horizontali injekcinė mašina iš Krauss-Maffei gamintojo, 1150 tonų uždarymo jėga. Pagaminimo metai: 2014. Darbo valandos: 35 640. MC6 valdymo sistema. Papildoma komplektacija: ABB 6 ašių robotas, 24 karšto kanalo zonos, sekvenciniai 10 pneumatinių + 10 hidraulinių. Galima parodyti gamyboje. Ncsdsy Efkrspfx Afaeu Techninės detalės UŽDARYMO JĖGA: 11 500 kN DARBO VALANDOS: 35 600 SRIEGINIO VARŽTO SKERSMUO: 90 mm INJEKCIJOS SLĖGIS: 1 839 bar INJEKCIJOS TŪRIS: 2 290 cm³ INJEKCIJOS SVORIS: 2 084 g ATIDARYMO EIGA: 2 000 mm PLATINŲ MATMENYS: 2 210 x 1 910 mm MINIMALUS FORMOS STORIS: 600/1 200 mm PAGAMINIMO METAI: 2014

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, 160 t Krauss-Maffei liejimo mašina, pagaminta 2006 m., su transporteriu. Sraigto skersmuo 35 mm, 2 branduolio ištraukikliai, 6 karšto kanalo zonos. Ši mašina tiekiama atnaujinta mūsų įmonės ir gali būti parodyta įjungta mūsų patalpose! Ncjdpfx Afjh Dh Dusaou

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 6 200 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 200 kN, varžto skersmuo: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons of clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras: 8 hot runner zones. 2 cores on the fixed platen, 2 cores on the moving platen. 1 pneumatic valve on the moving platen. The injection molding machine is delivered RE-Conditioned by the UK Transitus expert technical team. Commissioning at the customer's site can be offered, ensuring proper operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ Njdewq D Efepfx Afascu INJECTION WEIGHT: 1126 g MAX. DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm DISTANCE BETWEEN TIE BARS: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, Horizontal injection molding machine from Krauss-Maffei, 120 tons clamping force. Electric machine. Year of manufacture: 2008. MC5 control system. 63,000 operating hours. 40mm screw diameter. Extras: anti-vibration pads, 8-zone flow meter. Additional options: 1x pneumatic valve, 6 hot runner zones, Euromap 67 interface for robot connection. The machine is delivered RE-Conditioned by our technical team and in optimal working condition. We can offer commissioning services at your facility. Njdpfx Afottgybeaocu Technical Details INJECTION WEIGHT 185 g INJECTION VOLUME 201 ccm OPERATING HOURS 63,000 YEAR OF MANUFACTURE 2008 TIE BAR DISTANCE 470x470 mm PLATEN SIZE 780x770 mm CLAMPING FORCE 1200 kN INJECTION PRESSURE 1860 bar SCREW DIAMETER 40 mm MINIMUM MOLD HEIGHT 200/450 mm OPENING STROKE 850 mm

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 85 mm, Horizontal injection moulding machine by Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximately 60,000 operating hours. The injection moulding machine is delivered FULLY RECONDITIONED by our team of technical experts and is in optimal working condition. We can offer on-site commissioning at the customer's facility, ensuring proper operation upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2,242 bar INJECTION VOLUME: 2,695 cm³ INJECTION WEIGHT: 2,452 g (PS) Ncjdpfx Afew Avafsaou YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1,100 mm MAX. PLATEN DISTANCE: 2,100 mm OPENING STROKE: 1,600 mm TIE BAR DISTANCE: 1,120 x 1,000 mm PLATEN DIMENSIONS: 1,600 x 1,530 mm CLAMPING FORCE: 8,000 kN

Būklė: beveik kaip naujas (naudotas), bendras svoris: 6 400 kg, didžiausias leistinas svoris: 650 kg, keliamoji galia: 500 kg, Centrífuga reacondicionada de descarga inferior con cesta vertical y rascador sobre placa de inercia Tipo KM 125 fabricada por KRAUSS MAFFEI. Partes en contacto con el producto en AISI 316L. Suspensión: Centrífuga de tipo rígido montada sobre placa de inercia. Tapa: Con 3 cierres manuales, apertura mediante pistón hidráulico (incluye unidad hidráulica de potencia), un visor plano, un visor inclinado, rascador de torta, conexiones para entrada de N2 y conexiones para tubo de lavado y tubo de carga. Transmisión: Motor eléctrico ATEX de 37 kW. Nedpfx Aforrwdbjajcu Sistemas de seguridad: Pistón neumático de seguridad para apertura de tapa, detector de posición del pistón de seguridad de tapa, detector de tapa abierta, detector de tacómetro en máquina y motor (incluye caja de conexiones).

Būklė: naudotas, rida: 85 900 km, galia: 92 kW (125,09 AG), pirmoji registracija: 01/2012, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kita apžiūra (TÜV): 05/2028, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 5, krovimo vietos ilgis: 3 250 mm, krovinių skyriaus plotis: 2 130 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS, centrinis užraktas, suodžių filtras,