Liejimo mašina

KraussMaffei KM 160 - 750 CX

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 160–750 CX Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Bdodpfx Aajx Thzpe Djf Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: Opening: 44.8 kN Closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Minimum mould height: 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / option): 390 / 490 rpm Electrical and Hydraulic Equipment Nominal pump motor power: 22 kW Installed heating power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, veikimo valandos: 65 850 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61013689, spaudimo jėga: 2 500 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 630 mm, darbinio tūrio: 432 cm³, įpurškimo slėgis: 2 304 juosta, injekcijos svoris: 393 g, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained pre-owned injection moulding machine. Naturally, we also purchase well-maintained injection moulding machines, subject to models from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current Tax Savings and Advantages for Used Machines: From 01.07.2025, used machines are also eligible for a 30% annual special depreciation allowance. In addition to the lower purchase price compared to new equipment, you can claim the same depreciation amounts as with new machinery. Keyword: Growth Booster (§ 7 Section 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control Unit: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine No.: 61013689 Processed materials: PE and PP – Thermoplastics Features: - 2 x core pull (moving WAP, fixed WAP) - Pneumatic valve 1 on FWAP - Accumulator for increased injection capacity - Fast SK removal CX Midrange - Ejecting cooled nozzle tip - Start handling during mould movement - Start-up circuit - Cycle time analysis - External USB keyboard - Graphic analysis – maintenance alerts - Electronic coding of injection unit - Pneumatic valve on BWAP for air blast - 12 temperature control zones - Volt-free contact BDE - Process monitoring - Cycle data storage Bdjdpsxqhuuefx Aa Djf - Trend graphics – target/actual graph - PV control - Active back pressure control - From first ownership – origin Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 2500 kN / 250 t Tie bar distance: 630 x 630 mm Platen size: 995 x 1050 mm Opening width: 820 mm Min. mould height: 330 mm Max. opening stroke: 1,150 mm Ejector stroke: 200 mm Ejector force: 57 kN max / 26.3 kN return Injection Unit Screw diameter: 50 mm Injection volume: 432 cm³ Shot weight: 393 g/PS Injection pressure: 2,304 bar Electrics Pump: 45 kW Heating: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation, manual, and software Available immediately from our warehouse in Hanover, Germany, ex stock or delivered (shipping costs apply). The machine is offered fully tested and functional. The machine is our sole property. The requested machine is available immediately in Hanover, fully tested for functionality, and can be inspected under power. Information about our company and machines: - We only sell machines acquired from active production, from our own stock in Hanover. - All machines are checked and tested before removal. - We do NOT sell insolvency assets – we are NOT brokers dealing in third-party property. - Every machine offered comes from successful companies with a proven record of regular service and maintenance. - All offered machines can be inspected in our warehouse.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control unit with colour monitor, integrated control panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen traverse force: – opening: 35.4 kN – closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar clearance (h × v): 470 × 470 mm Mould opening stroke: 600 mm Mould installation height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Rated pump motor power: 22 kW Installed heater power: 15.62 kW Number of barrel heating zones: 5 Dry cycles according to Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m Bdodpfx Aex Avhyoa Dof

Būklė: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 45 mm, tarpas tarp stulpų: 520 mm, darbinio tūrio: 318 cm³, injekcijos svoris: 289 g, Pagaminimo metai: 2005 Eksploatavimo valandos: 80 228 val. Užspaudimo jėga: 160 tonų Atstumas tarp kolonų: 520 x 520 mm Bdedpfx Aozkqf Aea Def Sraigto skersmuo: 45 mm Įpurškimo tūris: 318 cm³ Įpurškimo svoris: 289 g (PS) Įranga: „Krauss Maffei“ robotas, šerdies traukimo įtaisas, „Euromap“, 3 papildomi įpurškimo moduliai.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 27 000 h, spaudimo jėga: 6 500 kN, Krauss Maffei KM650-3500 C2 injekcinio liejimo mašina parduodama. Bedpeyn Sc Eefx Aa Dodf Mašina yra labai geros būklės, naudota tik vienos pamainos režimu ir tik mažoms serijoms bei pavyzdžiams gaminti. Neseniai sumontuota nauja hidraulinė pompa (apytiksliai 300 darbo valandų). - 27 000 darbo valandų - Gamybos metai: 2007 - MC4 valdymo sistema - Šerdžių ištraukimas iš abiejų pusių - Tempimo strypai ir kreipiančiosios visiškai nepažeistos, kaip naujos - Robotas su išilginio paėmimo įranga (LR300) ir konvejerio juosta - Proporciniai vožtuvai, HPS sraigtas, bimetalinis cilindras - Bendras svoris apie 30 000 kg - Atidarymo eiga: 1 150 mm Adapterinės plokštės taip pat prieinamos pas mus. Galima apžiūrėti prijungus prie elektros. Papildoma įranga, tokia kaip Motan džiovintuvai, šalytuvai ir kt., galima pagal užklausą. Pagal susitarimą, mes galime demontuoti ir pakrauti įrenginį. Laukiame Jūsų užklausos.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, Clamping force: 1600 kN Maximum tool opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (H x V): 820 x 845 mm Clearance between tie bars (H x V): 520 x 520 mm Mould opening stroke: 650 mm Minimum mould installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Bdsdpfx Ajy Nlb Sea Djf Ejector force (forwards/backwards): 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticizing rate: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 ltr Dimensions and weights: Floor space approx.: 5.50 x 2.00 x 2.20 m Total weight: 8200 kg Max. mould weight: 1862 kg Accessories: - Oscillating elements - BluePower - servo pump drive Additional equipment: - 1 x air valve - 8 x hot runner control zones - 2 x core pulls at the moving platen - 2 x core pulls at the fixed platen - Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 58 670 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 45 mm, darbinio tūrio: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clearance between tie bars (h x v): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force, forward/back: 23 kN Bdsdpfx Aeydp Idea Dof Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 cc Shot weight (PS): 289 g Injection flow rate: 143 cc/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67