Įpurškimo liejimo mašina

KraussMaffei KM 800-4300 MX

Gamybos metai: 2003, Sąlyga: paruoštas naudoti (naudotas), Seven Arburg injection molding machines are available: 1) Arburg 320C 600-250, Year: 2001, Operating hours: 83,365h, Clamping force: 600kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. Kfsdpfx Abstyyn Hoksa 2) Arburg 420C 1000-250, Year: 2001, Operating hours: 90,769h, Clamping force: 1000kN, Screw diameter: 30mm, Shot weight: 97g, Max. injection pressure: 2470bar, Injection volume: 106cm³, Centering: 125mm/125mm, Max. opening stroke: 750mm, Daylight between platens: 750mm, Platen dimensions X/Y: 570mm/570mm, Tie bar spacing: 420mm/420mm, Core pulls: 2, Machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, Year: 1999, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 1, Temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, Year: 2000, Operating hours: 78,784h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 125mm/110mm, Max. opening stroke: 350mm, Daylight between platens: 350mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 320mm/320mm, Core pulls: 1, Temperature control units: 6. 5) Arburg 220C 250-60, Year: 2001, Operating hours: 86,595h, Clamping force: 250kN, Screw diameter: 22mm, Shot weight: 27g, Max. injection pressure: 2340bar, Injection volume: 30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6. 6) Arburg 270C 300-100, Year: 2007, Operating hours: 59,885h, Clamping force: 300kN, Screw diameter: 20mm, Shot weight: 28g, Max. injection pressure: 2500bar, Injection volume: 31cm³, Centering: 110mm/110mm, Max. opening stroke: 550mm, Daylight between platens: 550mm, Platen dimensions X/Y: 446mm/446mm, Tie bar spacing: 270mm/270mm, Core pulls: 2, Temperature control units: 6, Machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, Year: 2001, Operating hours: 57,504h, Clamping force: 250kN, Screw diameter: 18mm/22mm, Shot weight: 18g/27g, Max. injection pressure: 2500bar/2340bar, Injection volume: 20cm³/30cm³, Centering: 110mm/110mm, Max. opening stroke: 425mm, Daylight between platens: 425mm, Platen dimensions X/Y: 400mm/400mm, Tie bar spacing: 221mm/221mm, Core pulls: 1, Temperature control units: 6, Machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. Inspection on site is possible.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama Kfodpfx Aboxp Ebcskoa 4 spalvų ofsetinė ritininė spaudos mašina GOSS M 600 C, skirta žurnalų, knygų ir reklaminės produkcijos dideliems tiražams spausdinti, 2007 m. gamybos, mechaninis našumas 55 000 egz./val. Įranga: - JF-55 lankstytuvas - OMNICOM valdymo sistema - Autoplate – automatinis plokštelių keitimas - QUADTECH registravimo ir pjovimo kontrolės sistema - Uždara spalvų kontūro sistema - CCS ICON QUADTECH - Automatinis guminių voleklių valymas - Baldwin - Spaudinių silikonizavimas - Įklijų klijavimo sistema – Robatech - Įklijų priėmimo ir pjovimo įrenginys - Muller Martini - Kryžminis dėjiklis (Cross Stacker) - Muller Martini - Centrinė atliekų ištraukimo sistema - Ecocool krosnis - su integruotu išmetamųjų dujų sudeginimu ir šilumos atgavimo sistema - Velenu be transmisijos (shaftless)

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS Kedpfxsud H Dms Abksfa - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2006, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 85 mm, Horizontal injection moulding machine by Krauss-Maffei. 800 tons clamping force. Year of manufacture: 2006. Screw diameter: 85 mm. MC5 control system. Approximately 60,000 operating hours. The injection moulding machine is delivered FULLY RECONDITIONED by our team of technical experts and is in optimal working condition. We can offer on-site commissioning at the customer's facility, ensuring proper operation upon completion of installation. Technical Details SCREW DIAMETER: 85 mm INJECTION PRESSURE: 2,242 bar INJECTION VOLUME: 2,695 cm³ Kfedpfsw Avafex Abksa INJECTION WEIGHT: 2,452 g (PS) YEAR OF MANUFACTURE: 2006 OPERATING HOURS: 60,000 MIN./MAX. MOULD HEIGHT: 550 / 1,100 mm MAX. PLATEN DISTANCE: 2,100 mm OPENING STROKE: 1,600 mm TIE BAR DISTANCE: 1,120 x 1,000 mm PLATEN DIMENSIONS: 1,600 x 1,530 mm CLAMPING FORCE: 8,000 kN

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 70 111 h, Funkcionalumas: visiškai funkcionalus, Manufacturer ARBURG Description 320 C 600 - 250 Serial number 186245 Machine type ALLROUNDER 320 C Control version SELOGICA 3.030 Tie bar distance 320 x 320 mm Clamping force 600 kN Injection unit 1 250 Weight 2,330 kg Delivery date Kodpfx Aboxt Rpyskefa Aug 27, 2001 Specification Quantity CS - model size II 1 0001/000 320 C 600 - 250 1 0006/030 Thermoplastics cylinder cpl. 35 mm, highly wear-resistant 1 0060/035 SELOGICA user interface 1 0131/002 Software version 3.x SELOGICA 1 0131/030 Technology stage 2, servo-regulated with 2 control pumps 1 0132/003 Equipment for processing thermoplastics 1 0135/001 Open nozzle 35 mm 1 0220/035 Nozzle tip for open nozzle 1 0300/000 Heater band for open nozzle 1 0320/000 Clamping platen set 320 central, 125 mm central diameter 1 0356/011 Sorter unit, longitudinal installation incl. connection 1 0375/000 Programmable conveyor belt in machine base, longitudinal 1 0412/002 euromap robot interface, 32-pin with plug 1 0425/000 Serial interface for printer V24 1 0454/001 OKI dot matrix printer with serial V24 interface, incl. cable 1 0459/000 3 electric heating control circuits for mould heating 1 0469/003 Low voltage cabinet 400 x 800 1 0500/001 High voltage cabinet 800 x 800 1 0500/004 Shut-off valve for cooling water in supply line 1 1 0501/001 Machine cooling circuits regular, material feed adjustable 1 0525/002 Software package “Additional monitoring functions” 1 0555/001 Software package “Additional machine movements” 1 0555/002 Software package “Production control” 1 0555/003 Equipment package optimisation / user assistance 1 0555/005 Software package “Quality assurance” 1 0555/006 Software package “Documentation” 1 0555/007

Sąlyga: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 254387, spaudimo jėga: 3 000 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 630 mm, darbinio tūrio: 1 047 cm³, įpurškimo slėgis: 1 778 juosta, injekcijos svoris: 953 g, išstūmimo eiga: 200 mm, atvērimo eiga: 1 150 mm, plokštės plotis: 1 050 mm, plokštės aukštis: 995 mm, įrengimo aukštis: 330 mm, bendras ilgis: 6 210 mm, bendras plotis: 2 040 mm, bendras aukštis: 2 380 mm, bendras svoris: 12 500 kg, įpurškimų skaičius: 1, Įranga: dokumentacija / vadovas, Visi daiktai parduodami kaip naudoti ir nepatikrinti, nebent nurodyta kitaip. Parduodama tik liejimo mašina be valdymo įrenginio ar priedų. Atkreipkite dėmesį į prekės aprašymą. Kfsdpfx Ajxr Dfrsbkja

Sąlyga: geras (naudotas), Gamybos metai: 2004, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, For sale is an injection moulding machine from Krauss-Maffei, model 80-220C2. The machine comes from a well-maintained facility that places great value on regular servicing, and is fully operational immediately after installation. Year of manufacture: 2004 Machine number: 61004709 Clamping force: 80 tons Equipment: - Cylinder D35 - 1 hydraulic core pull - Pneumatic needle shut-off - Tie bar puller on the operator’s side Transport and loading can be organised Europe-wide on request and for an additional charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? Kfjdpfx Aowqmvgebksa For more information or contact options, visit our website.

Sąlyga: naudotas, Gamybos metai: 2001, veikimo valandos: 57 430 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 183899, spaudimo jėga: 600 kN, bendras svoris: 2 330 kg, Parduodama Arburg liejimo mašina Pagaminimo metai: 2001 Būklė: Labai gerai prižiūrėta, reguliariai ir laiku aptarnauta Apžiūra: Iki paskutinės dienos buvo eksploatuojama, šiuo metu dar prijungta prie elektros ir bet kada galima apžiūrėti vietoje Kedpfx Ajxdz I Ujbksfa Paruošta darbui: Prieinama iš karto ir pilnai veikianti Mašina yra labai geros būklės ir iškart paruošta naudojimui. Parduodama be įrankių ir tiekimo įrenginio. Daugiau informacijos suteiksime paprašius.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Injection Unit: - Screw diameter: 45 mm - Shot weight: 278 g - Injection pressure: 2336 bar - Dosage volume: 305 ccm Clamping Unit: - Clamping force: 110 t - Tie bar spacing: 470x470 mm - Size of platen: 745x770 mm - Ejector: hydraulic - Clamping unit: hydraulic Control system: MC IV Additional Equipment: - Machine in very good technical condition Kfsdexzz Ddjpfx Abkoa - Euromap 12 - Robot interface - Air valve x 1 - Hydraulic core pull x 1 - Control system with hot runners x 12 - Injection unit hardened – bimetallic - Parallel movements - Proportional valve on injection unit – precise injection - Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) - The machine has been regularly serviced by authorized Krauss Maffei service in Switzerland Dimensions: - Weight: 6,200 kg - Length/Width/Height: 4.66x1.51x2.19 m Drive: - Pump/Motor: 18.5 kW - Heating capacity: 16 kW - Total power: 34.5 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical tests at our company in Łódź. Price: On request