Hidraulinis Horizontalus Kampinis Juostinis Pjūklas pirkti naudotą (16 901)

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m Dusdpfjfn Andsx Ahrow SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 – 110 m/min Control system: CNC Total connected load: 1.5/1.8 kW Machine weight approx.: 0.63 t Space requirement approx.: 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45°: fully automatic operation • Mitre left 60°: semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: very quiet, low vibration cutting • Removable chip tray (cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Top access to saw, material, and feed unit • Folding safety cover • Fine adjustment of feed rate • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 subprograms for various Duedpfjd Iipzjx Ahrew lengths and quantities, e.g., one cutting program with multiple cut lengths • Automatic feed unit (CNC) via ball screw spindle with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, residual piece length 170 mm.

Būklė: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting capacity flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx. 8.45 t Dimensions (L x W x H): 4.485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer premium sawing technology and top performance when cutting specialty steels. • The electro-welded machine frame and the steel saw bow meet all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven with adjustable speed. • All machine movements (saw bow, vice, feed, saw band guides) operate via state-of-the-art linear guides with high static and dynamic load capacity, ensuring minimal sliding friction. • Another distinguishing feature is the material positioning rollers, which are hydraulically driven. They move perpendicular to the material, allowing for optimal clamping. • Thanks to height control of the saw blade position, the operator can set the band close to the material's top edge. After cutting, the band automatically returns to its previous position. Alternatively, the band can remain in the lower position. During the cutting cycle, the software compares the cutting load with preset values, enabling the sawing process to stop in case of anomalies. • The saw blade is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly quiet operation at a constant pressure. • Precision-ground carbide inserts clamp the saw blade, complete with lateral hardened and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw blade is tensioned via a hydraulic cylinder controlled by the machine software. The tension is automatically released after a specified time when the machine is idle or when a cycle has finished. • CNC-controlled automatic versions are available in the X-TECH 900 / 1200 models, featuring a 500 mm feeding length for high-production applications. • The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, ensuring precise positioning even at maximum load. • All guided movements are handled by four recirculating ball linear guides with high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request. Dsdpjfg E Hpsfx Ahrjuw

Būklė: naujas, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw blade length 3375 x 27 x 0.9 mm Blade speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox cast in a single piece, very quiet and low-vibration cutting • Removable chip tray (designed for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material and feed unit • Foldable safety guard • Fine feed rate adjustment • Semi-automatic cutting! • CNC control for optimized workflows Allows input of various parameters such as quantities and material lengths, Djdpoupw R Asfx Ahrouw automatic calculation of the kerf • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. one sawing program with multiple cut lengths • Automatic (CNC) feed unit via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, minimum remnant length 170 mm. Including: - Micro-spraying device - Leveling elements

Būklė: naujas, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400x250 mm Saw blade length: 4020x34x1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Powerful industrial hydraulics, 18 bar • Optimal material access • Ammeter for monitoring: - Cutting force optimization - Blade life monitoring Dodpfx Aed Iiptehrsuw - Cutting process control • Vise opens/closes hydraulically • Swarf cleaning brush • Ball bearing-supported material turntable • Moveable quick-action vise • Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Quick downfeed to material start or for serial cuts directly start sawing 4. Stop saw blade 5. Raise frame to just above material 6. Open vise

Būklė: naujas, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw blade length 2,965 x 27 x 0.9 mm Table height 940 mm Blade speed 35 / 70 m/min Total power requirement 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cutting monitoring via ammeter - Cutting pressure feed regulator - Blade speed 34 / 74 m/min - Mitre cuts up to 60° to the left and 45° to the right - Patented, ball-bearing turntable for easy mitre adjustment - Quick-release movable vice - Quick-action clamping lever Dedpfxjd Iip Ro Ahrouw - Automatic coolant system Shipping cost share: 120 EUR

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Horizontalus plonasluoksnių juostinis pjūklas su 3 galvomis Darbinis plotis: 300 mm Maks. 4 lamelių pjovimui vienu perėjimu Naujas 2025 m. modelis su didesniais, 80 mm pločio ratais Jutiklinis ekranas ir Schneider PLC 970 mm ratai didesniam pjovimo greičiui Dedpevwbg Uefx Ahrsuw Ratuose integruoti dažnių keitikliai, reguliuojamam pjovimo greičiui Lamelėms nuo 2 mm * kaip naujas *

Būklė: naujas, Semi-automatic metal band saw with high cutting accuracy. This machine allows for 90° cuts, as well as mitre cuts—stepless adjustment—left up to 45° and right up to 30° (pivot range: left 45°, right 60°). Standard features: - Large, rotatable support table with zero wear! (The saw band’s cutting channel rotates with the mitre setting) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – tubing) - Lowering of the saw arm via hydraulic cylinder; infinitely adjustable - Easy, manual sliding of the vice left/right - Electric band tension monitoring with saw band break detection - Coolant pump with dual supply to saw band guides - Carbide saw blade guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical Data ● Cutting capacity: 90° round 250 mm / flat 320 x 235 mm / square 235 x 235 mm 45° R round 220 mm / flat 230 x 210 mm / square 210 x 210 mm 45° L round 180 mm / flat 205 x 160 mm / square 160 x 160 mm 30° R round 130 mm / flat 130 x 105 mm / square 105 x 105 mm ● Drive rating: 1.5 kW // 400V // 50 Hz ● Total connected load: 3.35 kVA ● Band speed: 20–120 m/min, infinitely variable ● Saw band dimensions: 2910 x 27 x 0.9 mm ● Remnant length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1480 x 2000 mm ● Weight: 410 kg Price on request! Duodpfoctgkzjx Ahrew

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic-dynamic and manual operation. Equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Key features: - New centralized control console mounted on an articulated arm. - Low-voltage operating panel: polyester membrane keypad with thermoformed, raised buttons and activation control signal. - Display for: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time used for each cut * Saw band motor current draw * Saw blade tension * Saw blade speed * Numeric display of head position - IP55 manual cycle switch handle (24 V). - Complete programming of all special cutting cycles. - Capability to define additional special cutting cycles for specific applications. - Latest-generation high-performance, energy-efficient hydraulic control unit. - Rotating table (mounted on 420 mm roller bearing with preloaded thrust bearing). - Double band speed (40/80 m/min) with control system. - Prepared for installation of an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit the cut material. Dodpfxsfg E H Ue Ahrouw - Clamping device laterally movable to left and right, with quick-release vice. - Manual band tension control with display via electronic transducer on screen. - Base frame designed to retain all coolant, even for maximum angle cuts. - Coolant tray (equipped with electric pump for the lubrication and cooling of the saw blade), and chip drawer (can be replaced by a chip conveyor – see special accessories), both integrated in the base frame. - Prepared for installation of a minimum quantity lubrication set for the saw blade (optional, in addition to standard coolant lubrication with emulsion oil). - Chip removal brush. - Machine designed for pallet truck transportation. - Adjustable length stop for repetitive cuts. - Material support arm with roller for attaching the loading table. - Bi-metal saw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic modes, suitable for cuts from 45° right to 60° left. Key features: Dsdpfx Ahsfg E Iaorouw - Swivelling control panel mounted on a vertical post. - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts. - Dual blade speed (40/80 m/min.).

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off after the cut, the saw head lifts, and the vice opens. Some features: - New centralized control console mounted on a pivoting arm Dsdpfefg E H Rox Ahrouw - Next-generation hydraulic control system, highly efficient and low energy consumption - Base frame with extendable coolant tank The machine fully complies with all CE regulations!

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) Dusdpfx Aofg E H Sohrew * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Dusdpsfg E H Tofx Ahrow Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed. Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vise with quick-clamping device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubrication of the bandsaw blade. Chip removal brush. Adjustable precision stops for repeated cuts of equal length. Machine designed for pallet truck transport. Bimetal bandsaw blade for solid and profiled material. Tools and operating manual.

Būklė: geras (naudotas), Gamybos metai: 1985, Dimensions L-W-H 400x300x200 mm Saw blade diameter 420 mm Machine weight approx. 3500 kg Manufacturer: KASTO Model: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm Dedpsvf N Sujfx Ahrjuw Fully automatic NC horizontal band saw 1 chip conveyor, 1 external chip conveyor, 1 powered roller conveyor approx. 450 cm.

Būklė: geras (naudotas), Gamybos metai: 1995, Matmenys I-P-A: 3,50/2,40/2,20 mm Duedpfxjw N S Ecs Ahrjw Mašinos svoris apie 3 500 kg Gamintojas: KASTO, Tipas: HBA 420 AU, Gamybos metai: 1995 Pilnai automatinė NC horizontalioji juostinė pjovimo staklės su hidrauliniu spaustuvu iki 400 mm, 1 drožlių transporteriu, 1 išoriniu drožlių transporteriu, 1 ritininė linija, 1 ritininė linija, hidraulinė pavara, variklis išjungtas, Išmatavimai (plotis x aukštis x gylis): apie 400x200x350 cm

Būklė: naujas, Pjovimo skersmuo 250 mm Djdofg E H Nepfx Ahrouw Juostinio pjūklo juostos ilgis 2950x27x0,9 mm Juostos greitis 36/72 m/min Bendras galios poreikis 1,8 kW Staklių svoris apie 440 kg Absoli speciali kaina!! 7170,-EUR (Dabartinė kaina nuo 2024 m. – 9425,-EUR) Bazinis komplektas: Spaustuvai su greito reguliavimo ir reguliuojamais kreipiančiaisiais Hidraulinė juostos įtempimo sistema su slėgio indikatoriumi Stovas su nuimama aušinimo skysčio talpa Drožlių šepetys Nustatyti preciziniai sustojimai pjovimui: 0°, 45° ir 60° kairėje bei 45° dešinėje Sukamasis stalas dvigubiems kampiniams pjūviams Elektrinė aušinimo sistema 48 V (Galima sumontuoti mikro-purškimo įrenginį)

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 10 savaičių nuo užsakymo Kilmės šalis: Italija Kaina: 8680 € Lizingo įmoka: 167,52 € Pjūklo rėmas: pasukamas rėmas Juostinio pjūklo matmenys: 3120x27x0,9 mm Juostos greitis: 35/70 m/min Pjovimo našumas 0° apvalus: 280 mm Pjovimo našumas 0° kvadratas: 240 mm Pjovimo našumas 0° plokščias: 370x140 mm Pjovimo našumas 45° apvalus: 225 mm, kvadratas: 215 mm Pjovimo našumas 60° apvalus: 140 mm, kvadratas: 140 mm Darbinis aukštis: 830 mm Ilgis: 1550 mm Plotis: 1400 mm Aukštis: 1900 mm Svoris: 353 kg Rankinis prispaudėjas su greito užspaudimo svirtimi Nuleidimas dėl savo svorio su reguliuojamu slopintuvu 2 greičiai Aušinimo skysčio sistema Duedpfswirpvsx Ahrow PASIRINKTINAI: Voleliniai takeliai ir pjūkleliai pagal užklausą

Būklė: naudotas, Gamybos metai: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees, flat: 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Djdpfx Ahevxwkfjrouw Material feed - single stroke: 900 mm Multiple-feed length, max.: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Double-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; chip conveyor; 6m powered feed conveyor + 3x short roller conveyor 1m; 2m discharge conveyor; machine can be inspected under power.

Būklė: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 609086, Pasiūlymas 26074 Hidraulinė, dviem kolonomis vedama horizontalioji juostinio pjūklo automatika Techniniai duomenys: - Pjovimo sritis ties 90° apskritiems ruošiniams: 260 mm - Pjovimo sritis ties 90° plokštiems ruošiniams: 260 x 260 mm - Maks. viengubo stūmimo ruošinio padavimas: 600 mm - Maks. pjūvio ilgis daugiapakopėje padavoje: mm - Juostinio pjūklo matmenys apie: 4100 x 32 x 1,2 mm - Pjovimo greitis be laiptelių reguliuojamas: 12 – 100 m/min Dujdpeyn Ikrsfx Ahrsw - Pjovimo slėgis be laiptelių reguliuojamas: 0 – 10 m/min - Hidraulinis medžiagos prispaudimas su spaudimo reguliavimu - Aušinimo agento sistema - Drožlių konvejeris - Bendra variklio galia: 400 V / 8,5 kW - Reikalinga vieta apytiksliai: plotis 2350 x aukštis max. 2340 x gylis 3050 mm - Svoris apytiksliai: 1900 kg - Įvado ridenimo takas: 1500 mm

Būklė: geras (naudotas), Robust log carriage for horizontal frame saw or bandsaw Length approx. 9.0 m. Track gauge 920 mm. 6 clamping stands. With hydraulic feed. Also suitable for feeding drying chambers, etc. Dodpotqd Naefx Ahrsuw

Būklė: naudotas, Gamybos metai: 2006, Pjovimo skersmuo: 440 mm Juostos ilgis: 5200 x 1,1 x 34 mm Dodpjy Aa H Aofx Ahrouw Pjovimo plotis: 610 x 440 mm Bendras galios poreikis: 3,7 kW Staklių svoris: apie 0,8 t Užimamas plotas: apie 2,7 x 1,55 x 1,5 m Horizontalioji juostinė pjovimo staklės - Aušinimo skysčio įranga - Avarinis išjungimas

Būklė: naujas, Cutting diameter: 220 mm Saw blade length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Dsdpfxod Iip To Ahrsuw Machine weight approx.: 0.24 t Space requirements approx.: 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-action clamping device -Carbide saw blade guides -Blade tension control -Electric coolant system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder -Stepless feed adjustment -With limit switch -High-speed frame lowering from rest position to workpiece, then switch to normal feed rate -Manual operation

Būklė: naujas, Cutting diameter: 220 mm Saw blade length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space required approx. 1.2 x 0.6 x 1.7 m Dusdpfx Asd Iip Ushrjw SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m/min -Quick-release vise -Carbide saw band guides -Band tension control -Electric cooling system (automatic) Auto-Cut System = 3-stage system -Automatic saw frame lowering by hydraulic cylinder -Continuously adjustable feed -With limit switch -Rapid lowering of the saw frame from rest position to the workpiece, then switch to normal saw feed -Manual operation Shipping charge share: €85

Būklė: naujas, Cutting diameter: 550 mm Saw band length: 6850 x 41 mm Cutting width: 1.3 mm Control system: Semi-automatic Cutting range – square: 550 x 550 mm Cutting range – flat: 550 x 700 mm Total power requirement: 4 kW / 1580 Nm kW Machine weight approx.: 3,775 kg Space requirement approx.: 1850 x 1500 x 3450 mm The KLS 550 x 700 is a semi-automatic, column-guided horizontal bandsaw. Standard features: - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Blade breakage switch Duedsymf S Djpfx Ahrow - Stop system - Automatic ball screw lubrication - LED lighting - Swarf conveyor - Chip transport - 1400 mm feed drive - Double roller table - Material end detector - Program memory system - USB port output - PLC control & touchscreen - Frequency inverter Optional features: - Laser line - Oil mist lubrication - V-shaped vice - Additional double roller table - Upper clamping system - Sensor for identifying profile cutting The images are for illustration purposes only and do not constitute a true-to-scale representation of the machine.

Būklė: naujas, Cutting diameter: 660 mm Saw blade length: 9000 x 54 x 1.6 mm Dedpfx Ajymf R Tohrouw Cutting width: 1.6 mm Cutting capacity at 90° - round: 660 mm Cutting capacity at 90° - square: 650 x 650 mm Cutting capacity at 90° - rectangular: 650 x 1080 mm Cutting capacity at 45° - round: 660 mm Cutting capacity at 45° - square: 650 x 650 mm Cutting capacity at 45° - rectangular: 650 x 670 mm Cutting capacity at 30° - round: 410 mm Cutting capacity at 30° - square: 410 x 410 mm Cutting capacity at 30° - rectangular: 650 x 410 mm Total power requirement: 5.5 kW / 2775 Nm Machine weight: approx. 7,100 kg Space requirement: approx. 2,500 x 2,200 x 4,500 mm The KSY 2DT 650 is a semi-automatic, column-guided horizontal band saw. Additionally, the machine is equipped with a powered roller table, 2 meters long on both the front and rear sides. The machine is also fitted with a mist spray cooling system. Equipped with a linear guide saw frame, the KSY 2DT 650 enables precise and rapid mitre cuts. Standard Features - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Automatic mitre rotation - PLC touchscreen - Blade breakage detector / stop system - LED lighting - Swarf conveyor - 2 pieces of 2-meter roller tables - USB output Optional Features - Motorized system for roller table - Laser line - Mist lubrication - Extra double roller table The images are for reference only and do not represent a true-to-scale reproduction of the machine.