Akebono Ob-360 Banding Machine pirkti naudotą (69 697)

Būklė: naudotas, Gamybos metai: 2018, Naudota įranga Pagaminimo metai: 2018 Ypatybė: įranga, skirta apdoroti iki 100 mm aukščio detales! Būklė: patikrinta gamintojo „Lange Maschinenbau“ Gbedpfxozk Nmrs Al Isp Įranga ir techniniai duomenys: - Įrangos stalas su 13 ritininiais vadovais, užtikrinančiais geresnį detalių valdymą - Krašto įtraukiklis, sinchronizuotas su juostos padavimo mechanizmu - Krašto storis reguliuojamas skaitmeniniu skaitikliu - Pneumatinis ritininių valdymo mechanizmas su peiliu (skirtas apdoroti kraštus, kuriuos galima pjauti) - Trys spaudžiantys ritiniai - Juostos padavimo mechanizmas: - 0,25 kW - Apytiksliai 1250 mm ilgio - Apytiksliai 6,0 m/min - 50 mm platus dantytas diržas su storu, detalėms nekenksmingu guminiu paviršiumi - Skaitmeninis skaitiklis aukščio reguliavimui - Tiesus klijų tiekimas į detalę: sandarus klijų bakas su klijų rezervuaru apačioje ir greitas įšilimo laikas po įrangos sustabdymo - Krašto apdirbimo galvutė: - Skirta apdoroti detalės priekinį ir galinį kraštą - Automatinis nuskaitymas detalėje - Pneumatinis krašto apdirbimas peiliu, skirta apdoroti kraštus, kuriuos galima pjauti - Krašto frezavimo galvutė - Su vertikaliu nuskaitymu ir horizontaliu valdymu - Atkuriamas nustatymas naudojant skaitmeninius skaitiklius - 2 galingi 0,4 kW aukšto dažnio varikliai - Be žingsnelių reguliuojamas greitis nuo 4000 iki 18 000 aps./min. - Frezos skersmuo 70 mm, Z4, spindulys 2 mm / 15° - Centrinis įsiurbimo antgalis, skersmuo 100 mm - 2 drožlių nusiurbimo gaubtai su žarna, skersmuo 60 mm - Automatinis viršutinio frezos aukščio reguliavimas kartu su juostos padavimo mechanizmu - Detalės atrama, apytiksliai 1800 mm ilgio - Detalės atramos bėgelis, ištraukiamas apytiksliai 300 mm - Pasukamas folijos diskas, skersmuo: 800 mm - Detalės plotis: min. apytiksliai 80 mm - Detalės storis: 10–100 mm - Detalės ilgis: min. apytiksliai 220 mm - Krašto storis: 0,4–2,0 mm - Ritininio atskyrimo mechanizmas: maks. 1,0 x 55 mm, 2 x 45 mm - Klijų bako šildymo galia: 2,7 kW - Įšilimo laikas: apytiksliai 10 minučių - Darbo aukštis: apytiksliai 880 mm - Elektros jungtis: 400 V, 50 Hz, 3 fazės + N - Bendroji jungtis: 3,8 kW - Pneumatinė jungtis: 6 barai Matmenys (be folijos disko): apytiksliai 1800 x 700 x 1300 mm Svoris: apytiksliai 260 kg Pristatymo laikas: greitai Sandėlio vieta: Flörsheim

Būklė: naujas, Briaunavimo staklės (su kiaurymių lankstams funkcija) (naujos) Tipas: F-2 Gbjdpfsxv Udaox Al Iop Plokštės storis: 10-55 mm Briaunos storis: 0,4-2 mm Padavimo greitis: 13 m/min Oro slėgis: 0,8 MPa Bendra instaliuota galia: 10 kW Plokštės plotis: ≥ 80 mm Su priešfrezavimu Transportavimo matmenys: 3700x600x1250 mm Svoris: 960 kg Kaina: 11 200 Eur (EXW Jonava, Lietuva)

Būklė: labai geros būklės (naudotas), Band saw sharpening machine VOLLMER model BN30TS Gjdpjhhdaxsfx Al Ijbp

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, mašinos/transporto priemonės numeris: 0-200-87-0913, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: elektrinis, bendras ilgis: 10 825 mm, Įranga: dokumentacija / vadovas, Used single-sided HOMAG edge banding machine, for straight edges; for joint trimming, edge banding, and post-processing of various edging materials. Fixed fence side on the left. Year of manufacture: 2023, initial commissioning Nov. 2023 SPECIFICATIONS / EQUIPMENT: Gsdpfx Ajy D A Swol Iobp Base machine with 80 mm wide transport chain as workpiece feed device, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-out at feed stop - Glue roller clamping before workpiece rear edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit, climb/counter rotation 2x3kW, operation-controlled Horizontal positioning via NC motor (CAN) GLUING SECTION V20, consisting of: - QA60 glue application unit with PTFE (Teflon) coating - Premelter for PUR adhesive - EVA and PUR adhesives can be processed - Edge magazine, min. 0.4 mm to max. 3 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven / 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 cross-cutting unit horizontal, 2 motors each 0.8kW (front/rear edge) Chamfer/straight as well as overhang trimming - Pre-/flush milling unit 1.15 kW, top/bottom - Fine milling unit top/bottom, with NC adjustments - MF60 profile milling unit (corner rounding), 2 motors (top/bottom), servo-controlled with Softtouch - Controlled universal milling unit - Profile scraper top/bottom with exchangeable heads - FA10 flat scraper, top/bottom (version with 3 tracing rollers) - Buffing unit top/bottom CONTROL: - PC 23 powerTouch - woodCommander 5 - Gap-based machine setup - Edge sequence control

Būklė: geras (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, galia: 18 kW (24,47 AG), įėjimo įtampa: 380 V, įėjimo srovė: 32 A, pjovimo aukštis (maks.): 800 mm, pjovimo plotis (maks.): 900 mm, Šiame medienos pjovimo įrenginyje yra: 2 vnt. apkabų suktuvai 4 vnt. vertikalūs sustabdymo įtaisai Gbsdpfjzk Exdjx Al Iep 4 vnt. lygiavimo įtaisai su apkabomis 3 vnt. rėžės kėlimo svirtys 1 vnt. išankstinio pjovimo įrenginys 1 vnt. rėžės valcas su pavara 1 vnt. pjovimo disko tepimo įrenginys 1 vnt. vandens tepimo įrenginys 1 vnt. elektrinis padėčių reguliavimo įrenginys Pagrindinis pjovimo ilgis – 7,1 m Rėžės praėjimo plotis – apie 90 cm Hidraulinis siurblys: 17 litrų Variklio galia: 18 kW Pjovimo disko plotis: 100 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 45 mm, briaunos storis (maks.): 45 mm, bendras aukštis: 1 640 mm, bendras ilgis: 3 350 mm, bendras plotis: 1 510 mm, bendras svoris: 770 kg, ekstrakcijos antgalio skersmuo: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit from FELDER, model G480. Below are some useful details about the machine: * Year of manufacture: 2017 * Equipped with Schugoma hot-air system for zero joints * Connected load: 7 kW * Edge thickness: 0.4–3.5 mm * Panel thickness: 8–45 mm Gbjdpfx Aetp T Dtsl Ijp * Min. panel width/length: 70/210 mm * Feed speed: 9 m/min * Features pre-milling and corner rounding units * Automatic feeding of edge material from a coil * Pneumatic guillotine for PVC and ABS edging up to 3 mm thick * Teflon gluepot with a capacity of 1.2 kg * Saw-blade trimming unit, 12,000 rpm * Swivelling control panel with LCD display * Extraction ports: 7 x 60 mm * Weight: approx. 770 kg * Overall dimensions: 335 x 151 x 164 cm (W x L x H) * In excellent technical and visual condition

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 34 kW (46,23 AG), įėjimo įtampa: 380 V, Įranga: dokumentacija / vadovas, Upper Pressure Bar Aluminum pressure bar provides excellent rigidity and extended service life. Compactly arranged rubber rollers press the workpieces to ensure transport without shifting. Panel Conveyor Long, heat-treated semicircular guide rail allows perfect contact with the conveyor, with zero play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Narrow Part Feeding Package Feeding package for narrow parts, ensuring the narrow edge is at least 40 mm. Pre-Milling Unit Pre-milling with 2 diamond cutters, 43mm height. Gbsdpfxsy Rlbns Al Iop Two pneumatically controlled motors (2 x 3.7kW), intermittent milling of the panel edge. Panel Pre-Heating Unit x2 Heats the panel edge so glue melts properly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the part end for improved adhesion. Edgebanding Magazine Support x2 Large support at suitable height for easy feeding and long service life. Edgeband Shearing Unit x2 Pneumatically operated guillotine with electric switch for precise cutting of the edging strip at the end. Premelter Gluing Unit x2 System features an upper reservoir for optimal volume and a small lower tank to keep adhesive fresh. Automatic Glue Pumping + 25kg Basin Adhesive is automatically pumped to the upper reservoir when the level drops below the sensor. Edgeband Shearing Unit Pneumatically operated guillotine with electric switch for precise cutting of the edging strip at the end. 2 Sets of Pressure Rollers A 100mm pre-pressing roller coordinated with four rear rollers ensures firm pressing. Lubrication System Lubrication pump for daily maintenance, lubricating the guide rail by simply operating the lever. End Trimming Unit Structure with 45° linear guide, with 2 motors of 0.35kW, 12,000 rpm. 2 Sets of Fine Finishing Units with Pneumatic Retraction One set pneumatically retracts when changing edgeband thickness, adjustment time is practically zero. Diamond knives R1.5. Corner Rounding Unit Designed for rounding the edgeband edges at the ends and longitudinally, achieving circular radius R. 2 Scraping Units with Pneumatic Movement Two sets with circular radius knives (one set R1.5, the other R1). Extraction System Each unit has an independent extraction port (125mm), total 6 ports. Glue Scraping Unit (Flat) Removal of residual edgeband, followed by flat scraping to remove excess glue from the upper and lower panel surfaces. Spraying Unit - Cleaning Agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 Sets of Polishing Units For 2 adhesive colors (dark and light) to prevent contamination. Solution for Narrow Parts Allows processing of workpieces with sizes: 120x120mm (all 4 sides), 200x40mm (long side), 40x200mm (short side). Additional Conveyor Roller Solid support for large panels or inline transport. PUR Device 2KG/20KG - 6500 EUR + VAT Temperature control system via touchscreen and uniform heating. Polyurethane (PUR) based adhesive technology ensures superior bonding performance.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, /// Überblick Die NB7X ist eine leistungsstarke, automatische Kantenanleimmaschine, speziell entwickelt für die grifflose Möbelfrontenfertigung. Sie ermöglicht einen einfachen Wechsel zwischen Halb-Fase (45°) und kompletter Geradkante. Ausgestattet mit zwei Diamant-Fräsern, einer doppelten Leimstation sowie einem Doppel-Tapemagazin ist sie ideal für Platten mit einer Stärke von 9 bis 50 mm (gerade) bzw. 15–25 mm (Halb-Fase) geeignet. Damit bietet die NB7X die perfekte Lösung für die moderne, grifflose Möbelproduktion. Gbedpfx Ajy Sk T Esl Isp /// Hauptmerkmale Fasenkanten-Fräseinheit — Zwei leistungsstarke 4 kW-Motoren (2.800 U/min) mit 45°-Diamant-Fasenschneidern für präzises, ausrissfreies Fräsen. Vorfraäsen — Zwei Leitz Diamant-Vorfräser (2× 3,7 kW, 9.000 U/min) beseitigen Sägeriefen für optimalen Kantenkontakt und beste Haftung. Doppel-Leimsystem — Separate Leimaggregate für Gerade- und 45°-Fase; Teflon-beschichteter EVA-Leimtopf (~5 L) sowie optionales automatisches Leimfördermodul mit 25 kg Vorratsbehälter. Vorerwärmung — Erwärmt die Plattenkante vor der Leimung, ideal bei kalten oder feuchten Umgebungen. Kantenbandzufuhr — Separater Bandhalter für Gerade- und Fasenbetrieb sowie eine Nutvorrichtung für das Kantenband für sauberes Umschlagen bei dickeren Bändern. Kappen, Vor-, Fein- & Eckentrimmen — Vollständige Trimmstationen mit Hochgeschwindigkeitsmotoren und Kopierschablonen, die Topfbandbohrungen schützen. Abschaben & Polieren — Flächen- sowie Profilabschaber entfernen Leimüberstände; zwei Poliertücher sorgen für glänzendes Finish. Andruckbalken — Aluminiumpressbalken mit automatischer Höhenanpassung je nach Werkstückdicke; widerstandsfähige, gummierte Transportrollen verhindern Positionsabweichungen beim Durchlauf. Sicherheit — Einlauf-Schutzvorrichtung, Werkstückdickenerkennung, Intervallzufuhrerkennung und Not-Aus. Bedienung — 10″-Touchscreen mit SPS-Steuerung (380V/50Hz), energiesparender Standby-Modus und Fernstart/-stopp. Steuerung in Englisch, vereinfachtem und traditionellem Chinesisch verfügbar. /// Maschinenbau Das massiv geschweißte Maschinenbett durchläuft Wärmebehandlung, Schwingungsentspannung, Sandstrahlen sowie CNC-Endbearbeitung für dauerhafte Maßhaltigkeit. Die Endmontage erfolgt durch erfahrene Fachkräfte nach strengen SOPs; ein Qualitätszertifikat, unterschrieben vom Qualitätssicherungs-Experten, liegt jeder Maschine bei.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, „Band-A-matic“ F117S 220 V, vienfazis Pilnai veikiantis Godpfx Alszkwdfo Iobp Pagaminta Japonijoje Tinka pakuoti mėsą, paukštieną, žuvį, sūrį ir kitus maisto produktus Galima apžiūrėti ir išbandyti

Būklė: naudotas, Gamybos metai: 1997, bendras aukštis: 2 400 mm, bendras ilgis: 1 800 mm, bendras plotis: 1 000 mm, Spalva: pilka Svoris: 750 kg - Metai: 1997 - Dokumentacija prieinama: ne - CE sertifikatas: nėra - Serijos numeris: AS10384 - Pjovimo kryptis: vertikali - Pagrindinio variklio galia [kW]: 15,0 - Maks. pjovimo atstumas iki padavimo volo [mm]: 250 - Maks. pjovimo atstumas iki atramos [mm]: 300 - Maks. pjovimo aukštis [mm]: 3450 - Stalo plotis [mm]: 790 - Stalo ilgis [mm]: 740 - Maks. juostinio pjūklo plotis [mm]: 70 - Maks. juostinio pjūklo ilgis [mm]: 5600 - Padavimo volų tipas: automatiniai elektriniai - Ištraukimo jungties skersmuo [mm]: 150 - Pasirinktys: pasukamas atmušas Gbjdpfszgup Dox Al Isp - Įtampa [V]: 400 - Transportavimo matmenys: 1800mm x 1000mm x 2400mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 750kg - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir dalinis atsiskaitymas (mainai) galimi bet kurioms pramonės srities prekėms Yorick Diebels

Būklė: naudotas, Gamybos metai: 2020, Naudota mašina Pagaminimo metai: 2020 Įranga: - Agregatų valdymas per lietimui jautrų ekraną - Sujungimo frezavimo agregatas - Klijų talpa - Nupjovimo agregatas - Spindulio frezavimo agregatas - Spindulio gremžtuko agregatas Gsdsx Enquopfx Al Iobp - Plokštuminio gremžtuko agregatas - Poliravimo agregatas - Purškimas priekyje ir gale Vieta: Reino kraštas-Pfalcas Prieinamumas: pagal susitarimą Pardavimas kliento vardu. Duomenys be garantijos.

Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation. Machine Features This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system. The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut. The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder. Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks. The machine is powered by a worm gear motor. The motor with a thermal fuse protects against overheating during operation. Technical Data: Godpfx Aleudi Uno Ijbp TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity (Diameter / Dimensions in mm): ANGLE ROUND RECTANGLE SQUARE 0° ø220 260 x 140 200 x 200 45° R ø160 160 x 140 160 x 160 60° R ø100 120 x 100 100 x 100 Price does not apply to machines purchased in Poland.

Būklė: labai geros būklės (naudotas), SCM Contura in excellent condition Gsdpfet E T I Njx Al Isbp

Būklė: geras (naudotas), Gamybos metai: 2015, mašinos/transporto priemonės numeris: 0-200-24-0779, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 55 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, bendras ilgis: 10 825 mm, Used single-sided HOMAG edge banding machine for straight edges; designed for jointing, edging, and post-processing various edge materials. Fixed fence side left. Year of manufacture: 2015 SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed device, - Maximum workpiece thickness: 60 mm Gbsdozina Ijpfx Al Iop - Motorized height-adjustable top pressure - Workpiece support with roller rails - Glue pot lift-off function at feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Jointing unit, climb/counter rotation 2x4kW, demand-actuated horizontal positioning via NC motor (CAN) GLUING SECTION A20, comprising: - QA60 glue application unit with PTFE coating (Teflon) - Pre-melter for EVA adhesive. - Suitable for both EVA and PUR adhesives - Edge magazine, min. 0.4 mm to max. 20 mm edge thickness - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 4 non-driven pressure rollers POST-PROCESSING SECTION: - PK25 horizontal end trimming unit, 2 motors each 0.8kW (front/rear edge) chamfer/straight cut, as well as trimming excess - Pre-/Flush trimming unit 1.15 kW, top/bottom - FK11 contour trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled from the operator panel various interchangeable heads equipped with tools - Universal milling unit 3.5 kW, controlled - Multi-profile scraper top/bottom - Flat scraper top/bottom - Buffing unit top/bottom CONTROL: PC 23 powerTouch - woodCommander 5

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Tinka lenktiems kraštams. Geros būklės, galima išbandyti! Gjdpfxozc Hxqj Al Isbp

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Pjovimo greitis bepakopis: 20–70 m/min Gbsdpfx Alezgdbis Ijp Juostinis pjūklas: 3660 x 27 x 0,9 mm Padavimo ilgis: 400 mm Pjovimo sritis – apvali/kvadratinė: 250 / 250 mm Pjovimo sritis – stačiakampė: 300 x 260 mm

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Stefani Ibimatic Double Edge Bander Year: 1998 S/N: NH 002993 Manufacturer: Stefani S.p.A., Italy Edgebanding height min./max.: 14–65 mm Thickness min.: 0.3 mm Max ABS size: 3 x 35 mm Gbodjtrgy Nopfx Al Ijp Panel thickness min./max.: up to 60 mm Panel size: 220–3200 mm Working edge: 30–75 mm Distance between edges: 400 mm Adjustable feed speed: 6 to 36 m/min Units: 1+1 pre-milling units, 4 kW, pneumatic 1+1 air jet for cleaning workpieces 1+1 gluing station / melt adhesive unit GR_HMP-P HM-P HOT-MELT GLUING DEVICE FOR STRAIGHT EDGES The device is designed for gluing straight edges using a hot-melt adhesive with a removable tank and a pre-melter for rapid melting. The unit includes: A - Glue tank B - Strip storage table C - Pneumatic device box D - Support base for strip storage E - Guillotine shears F - Side pressure unit G - Tilting adhesive unit H - Mobile table top 1+1 edging feed device, 5 stations 1+1 end trimming unit, 0.35 kW, 12,000 rpm 1+1 fine trimming unit, 1 kW, 12,000 rpm 1+1 bevel milling unit, 0.5 kW, 12,000 rpm, R14/R25, diameter 80 mm, 12,000 rpm 1+1 corner rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side free space (U28+U55), diameter 125 mm, 12,000 rpm 1+1 self-adjusting scraper RCA 95 1+1 brushing/buffing unit, 0.29 kW, 1,500 rpm, SPO (150/50x50 mm) 1+1 ABS strip color enhancer, 1600 W

Būklė: paruoštas naudoti (naudotas), Jaespa AS 6 Vertical Band Saw Bandsawing Machine Band length: min - 4400mm; max - 4600mm Table: 670mm x 670mm Throat depth: 620mm Weight: 834 kg Dimensions: 1400mm x 800mm x 2250mm (L x W x H) You are welcome to arrange an inspection appointment. We can organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued. The prerequisite is a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers as well. Gbedpswcp Rksfx Al Isp The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and possible errors in the item description may occur and are subject to change.

Būklė: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: MR007049, Naudota: SCM briaunų laminavimo staklė, labai geros būklės. Pilnai komplektuota mašina, paruošta darbui. Naudota: SCM briaunų laminavimo staklė – modelis Olimpic K360 T-ER13 Su šiais papildomais pasirinkimais: - Mašina atitinka Europos CE standartus - Antilipnumo purškimo įrenginys AAR - Klijų nugrandymo agregatas RC-V - Šepečio agregatas SP-V - Touch 7 valdymas – 7 colių jutiklinis ekranas (galimybė išsaugoti iki 60 programų) - AUTOSET T-ER1 agregatui 3 pozicijos R-K lygiajam frezavimo agregatui 2 pozicijos apvalinimo frezavimo agregatui Pneumatinis klijų nugrandymo įrenginio įjungimas/išjungimas - Apdirbimo agregatų „nesting“ jutikliai Mašinoje sumontuoti šie agregatai: – Išankstinio frezavimo agregatas su 2 varikliais – suslėgto oro paviršiaus valymas po frezavimo – Purškimo agregatas: purškia po išankstinio frezavimo, kad būtų išvengta klijų prilipimo prie paviršiaus – Klijų agregatas su dvigubu temperatūros nustatymu – galima naudoti PV ir EVA klijus – Nupjovimo agregatas briaunos juostai nukirpti – Frezavimo agregatas su tvirtomis kreipiančiomis ritinėliais – idealiam frezavimui palei paviršių – Apvalinimo frezavimo agregatas, skirtas apvalinti arba nuožulninti galinius kraštus – Spindulinis nugrandymo agregatas tobulai lygiai R=2 briaunai – Purškimo agregatas, skirtas iš anksto ištirpdyti klijus ir suteikti blizgesį Gbjdpfx Alozgwzve Iop – Klijų nugrandymo agregatas, skirtas pašalinti likusius klijus nuo paviršiaus – Šepečio agregatas priklijuotai briaunai poliruoti Techninės specifikacijos: - Min./maks. briaunos storis: 0,3–3 mm - Padavimo greitis: 11 m/min - Mažiausias skydo storis: 8 mm - Didžiausias skydo storis: 50 mm - Svoris: 1433 kg - Serijos numeris: AH/118707

Gamybos metai: 2016, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with lockable (arete) curtain slats. It automatically cuts the profiles to the required length, assembles them into the roller shutter curtain, and secures (locks) them. A key feature of this machine is the capability to perform multiple operations simultaneously: cutting profiles to size, joining them into a roller shutter curtain, and locking (arete) them to prevent shifting after installation. Gbodpow Dm Hrjfx Al Iop Electrical connection: 3.5 kW, 400 V, 50 Hz Shutter width: min. 500 mm - max. 3,500 mm Label printing (optional): 36 x 89 mm Transport of the machine is the responsibility of the buyer. We offer assistance with loading.

Būklė: naudotas, Gamybos metai: 1998, bendras aukštis: 2 550 mm, bendras ilgis: 1 800 mm, bendras plotis: 1 800 mm, Color: Grey Weight: 2,000 kg Gbedpfx Aleym Rt Hs Iop - Special features: - Description: The drive roller shaft is loose on the machine - Year of manufacture: 1998 - Documentation available: No - CE certificate available: No - Serial number: AT10548 - Saw direction: Vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting capacity up to feed roller [mm]: 240 - Max. cutting capacity up to stop [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. overall opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw blade width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Swiveling fence - Voltage [V]: 400 - Power consumption [A]: 32 - Fuse [A]: 40 - Output [kW]: 19.5 - Transport dimensions: 1800 mm x 1800 mm x 2550 mm (L x W x H) - Transport weight [kg]: 2000 kg - Transport packages [pcs.]: 1 Financial information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Būklė: naujas, NEBES TM 275 Bandsaw – 400 V Three-phase, NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Fully cast iron structure Electric pump for blade lubrication and cooling Gbedpfeh Nm Ncex Al Iop Blade tension gauge in oil bath Front controls and two cutting speeds Selector switch for excluding the coolant pump Blade guide with carbide pads (H.M.) Round cutting capacity at 0°: 220 mm Square cutting capacity at 0°: 200 x 200 mm Rectangular cutting capacity at 0°: 230 x 185 mm Round cutting capacity at 45°: 150 mm Square cutting capacity at 45°: 150 x 150 mm Rectangular cutting capacity at 45°: 150 x 200 mm Round cutting capacity at 60°: 90 mm Square cutting capacity at 60°: 90 x 90 mm Rectangular cutting capacity at 60°: 90 x 120 mm Motor power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, COMAL PRD 12 PROFILIUOJANTI STAKLĖS Automatinis briaunavimo įrenginys juostų galams apdirbti. Naudojamas ruošiant juostų kraštus tolimesniam kalandravimui. Įrenginys su volelių eile, skirta šaltam juostų ir lakštų profiliavimui – jie formuojami nenutrūkstamu procesu iki norimos formos ar vamzdžio. Godpfjxdr Swsx Al Iobp Staklės naudotos labai mažai, pilnai veikiančios, geros bendros būklės. Galimas originalus vadovas ir dokumentacija.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, galia: 16 kW (21,75 AG), įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 6 mm, X ašies padavimo greitis: 11 m/min, bendras ilgis: 4 150 mm, bendras svoris: 1 350 kg, paskutinio kapitalinio remonto metai: 2026, Įranga: CE žymėjimas, dokumentacija / vadovas, Brandt-Homag KDF 220 Highflex briaunų klijavimo staklės, pagaminimo metai – 2012 Gedpjzdb Ivefx Al Iobp Iš mažos stalių dirbtuvės Paskutinė patikra: 2026-03-20 Tipas: KDF 220 Mašinos numeris: 0-261-20-6136 Elektros schemos numeris: 0-261-20-6136 Pagaminimo metai: 2012 Maitinimo įtampa: 400Y/230 Agregatai valdomi iš ekrano Priklijavimo agregatas: 2 x 2,2 kW Pjūklų agregatas: 2 x 0,18 kW Briaunų frezavimo agregatas: 2 x 0,27 kW Profilinio frezavimo agregatas: 2 x 0,35 kW WD 40 Papildoma funkcija: konstrukcijos padas Spindulio grandiklis Plokštumos grandiklis Briaunų storis: 0,4 - 6 mm Ruoinio storis: 8-60 mm Padavimas: 11 m/min Bendra galia: 16 kW Ilgis: 4150 mm Jei turite klausimų arba reikia daugiau informacijos, prašome parašyti žinutę arba paskambinti.

Būklė: naujas, Gamybos metai: 2026, CORMAK BS912N BAND SAW Specification: - The material to be cut can be fed manually or by any mechanical device. The feed of the cutting tool is automatic. Gjdpsy En E Sofx Al Iebp - The arm's descent speed is controlled via a hydraulic cylinder. The desired speed is achieved by adjusting the oil flow between the cylinder chambers using a regulating valve. - The required linear speed of the blade is obtained by changing the pulley ratio between the worm gearbox and the drive motor. A coolant tank with an electric pump is installed in the base. - The precision and robust construction make this saw a leading band saw in its class, with a large cutting capacity of up to 230 mm and an adjustable cutting angle from 0 to 45 degrees. - The CORMAK BS912N band saw, thanks to its innovative enhancements and quality bimetal blades from reputable manufacturers, is widely used in all metalworking shops where precision, quality, accuracy, and cutting speed are important. - The cutting angle is set using a swiveling vise within a 0 - 45° range. - The massive vise walls are made from durable cast iron. An angle scale is located at the rear of the vise for easy and quick cutting angle settings. - Both blade guides are equipped with a cooling system that delivers coolant directly to the blade and the workpiece. - This model is equipped with a convenient blade tensioning handle and a quick-release vise clamp for securing the workpiece. - The saw arm houses a blade tension indicator and a selection table for blade pitch and cutting speeds according to the type of steel being cut. - In the arm's lower position (after the cut is completed), the blade drive automatically switches off via a new-generation limit switch. - Safe operation during the cutting process is ensured by an electrical system that fully meets all CE requirements. The machine has a limit switch that stops the machine when cutting is finished, an emergency stop 'mushroom' button, and several micro-switches that cut power if the belt guard or blade guard is opened. - Additionally, our model is fitted with a wire brush for cleaning the blade of chips, preventing blade clogging and ensuring more effective cutting. - The blade guides feature special carbide inserts and bearings, significantly improving blade tracking, longevity, straightness, accuracy, and quality of cuts. - Carbide guidance greatly reduces wear on both the machine and the blade itself. - The arm is made of profiled spheroidal cast iron, ensuring rigidity during operation and absorbing all types of vibrations. - The control panel is located on the arm of the saw. Technical Data: Motor 230V~, 50Hz, 1100W 400V~, 50Hz, 1100W Blade dimensions: 2655x27x0.9 mm Blade speeds: 24/36/49/71 m/min Cutting angle range: 0 to +45 degrees Machine packaging dimensions: 1420x500x1150 mm Weight: 151/202 kg INSTRUCTIONS IN ENGLISH