Kk Kletzer Cnc Abkantpresse Kki Europa Xl 4050 Mm X 175 To, Y pirkti naudotą (108 479)

Būklė: naujas, Stroke length (max.): max. 400 mm Table height: Floor to top edge of table 850 mm Installation height: 600 mm Speeds: Advance 120 mm, Pressing 13 – 4 mm, Return 170 mm/sec Pump capacity: 65 L/min (REXROTH – axial piston pump) Motor: 15 kW – 1500 rpm Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1,500 kN (150 tons at 245 BAR) Operation Mode: Selection via key switch - Manual / setup mode via two-hand control without light sensor safety on the front (rear side always active) - Automatic mode via two-hand operation at full speed (with active light sensor safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 rpm (IE-3) Pump: 45 cc, 65 L/min, REXROTH – axial piston pump Speed: Advance 120 mm – Pressing 13–4 mm – Return 170 mm/sec Clear width: 1300 mm Table plate: 1200 x 800 x 90 mm, with T-slots Ram plate: 1200 x 800 x 600 mm, with T-slots & reinforcement ribs Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to top edge of table) ----- Hydraulics: (Hydraulic accessories located on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety device Mechanical ram safety at upper dead center Hsdpfempfwdex Admsnk Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control system: Main control cabinet (mounted lateral to the press frame) Swiveling operator panel SIEMENS S7 – 1200 KTP 9” SIEMENS touchscreen (language selection DE / ENG) Safety PLC (SICK) Light curtain for front & rear of work area (SICK 750 + 150 mm.) Soft starter Movable two-hand operation SECOMEA Ethernet connection Linear measuring system for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT) Work Area Lighting (2x IP-66) - 8 free PLC I/O ports for external connections ----- - Safety guard around hydraulics - Side access ladder ----- Documentation: Operating manual GERMAN (1 copy paper & 1 copy USB) Hydraulic & electrical diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2,400 x 2,100 x 4,100 mm Total weight: approx. 11,000 kg Painting: Frame RAL 7035 light grey

Būklė: naujas, Stroke (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: approach 120 mm/s, pressing 13 – 4 mm/s, return 170 mm/s Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW – 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil fill: 700 L Hydraulic Double Column Press 250 TON by KK Kletzer Capacity: 250 tons (at 245 bar) Operation: - Via key switch - Manual / setup mode via two-hand operation (without light sensor) - Automatic mode via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs Ø 80 x 60 mm Motor: 22 kW – 45 HP Pump: 103 L/min REXROTH axial piston pump Speed: Approach 120 mm/s Pressing 13 – 4 mm/s Return 170 mm/s Clear width: 1100 mm Hnedpogta Rcefx Admjk Table plate: 1000 x 1000 mm, with T-slots Ram plate: 1000 x 1000 mm, with T-slots & spring welds Installation height: 600 mm (max. distance between table and ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: Block & valves (REXROTH) (hydraulic components mounted on top of the press) Pre-fill valve Hydraulic & mechanical ram safety Pressure adjustment via PLC (min. pressure 35 tons) Speed adjustment via PLC Pressure hold valve for 600 seconds Air cooler (temperature control adjustable via display) Automatic guideway lubrication (adjustable via display) Work area protection with sheet metal side panels Guide rails for parallelism Auxiliary motors: 5.5 kW + 2.2 kW Auxiliary pumps: 22 cc + 5.5 cc Safety guard around hydraulic unit and lateral climbing ladder Oil tank: 800 L Oil volume: approx. 700 L Control system: SIEMENS S7-1200 Main switch cabinet Swiveling operator panel Soft starter for main motor Safety PLC: SICK PLC display: 9'' Siemens Movable two-hand operation Digital length measuring system for stroke adjustment 450 mm (NOVOTECHNIK) Light sensors at front & rear of work area – SICK 900 + 150 mm SECOME & Ethernet interface for remote maintenance (Siemens) Work area lighting, 2x 8 free I/Os at the PLC Automatic pressure replenishment in case of loss Operating manual in German Hydraulic diagrams Control diagrams The price is approximate, as steel prices may vary.

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Approx. weight: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Technical Data: Sheet thickness: 6 mm Hjdovap Tuepfx Admenk Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 6,250 kg Equipment: Swing-beam shear design NC preselection control ELGO P 40 T with backgauge and cutting gap adjustment from the front via control panel motorized backgauge up to 1,000 mm clear control panel mounted on swivel arm hydraulic hold-downs positioned close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball transfers fold-up finger guard, 1,000 mm 1 T-slot side stop 2 sheet support arms with T-slot simple blade changing and regrinding adjustable cutting length for efficient processing bottom blade with 4 cutting edges (reversible) top blade with 2 cutting edges (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE regulations

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Approx. weight: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorised, 1,000 mm Hsdpfovap Thsx Admjnk Motor power: 15 kW Length: 3,800 mm Width: 1,820 mm Height: 1,920 mm Weight: 7,700 kg Equipment: Swing beam shear design NC preset control ELGO P 40 T with backgauge and cutting gap adjustment from the control panel motorised backgauge up to 1,000 mm clearly arranged control panel mounted on a swivelling arm hydraulic hold-downs positioned close to the cutting line foot switch cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard 1,000 mm 1 T-slot side gauge 2 sheet support arms with T-slot simple blade changing and regrinding adjustable cutting length for economical processing lower blade with 4 cutting edges upper blade with 2 cutting edges qualified customer service operating manual in ENGLISH Machine and equipment conform to CE regulations

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Approximate weight: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Back gauge: motorised, 1,000 mm Motor power: 22 kW Length: 3,800 mm Width: 1,950 mm Height: 2,080 mm Weight: 10,600 kg Hnedpovap Tnofx Admok Equipment: Swing-beam shear design NC pre-select control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the control system motorised back gauge up to 1,000 mm clearly arranged control panel mounted on swivelling arm hydraulic hold-downs positioned close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball transfers foldable finger guard 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot easy blade change and resharpening adjustable cutting length for efficient processing lower blade usable on 4 sides upper blade usable on 2 sides qualified customer service Operating manual in ENGLISH Machine and equipment in compliance with CE regulations

Būklė: naujas, Pressure: 125 t Ram Adjustment: (automatic adjustment) 40 mm Stroke Length (max.): 10–125 mm Total Power Requirement: 11 kW Hjdpjktm N Defx Admsnk Approx. Weight: 8,000 kg Dimensions (L x W x H): 1,800 x 1,500 x 2,600 mm Technical Data Press Force: 125 t Strokes per Minute: 50 spm Table Size: 900 × 700 mm Ram Size: 700 × 500 mm with pin receptacle Stroke Adjustment: 20–125 mm Ram Adjustment: 40 mm Installation Height: 475 mm Accessories & Equipment Control System: Siemens S7-1200 PLC Operating Screen: 9” Siemens touch panel Precise stroke length adjustment directly via display Setting min. & max. stroke rate Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety architecture in the control cabinet Light curtains: SICK, PILZ, or LEUZE (Category 4, CE-compliant) 2 rupture discs – included Lower support plate for secure transportation Anti-reach protection – for maximum occupational safety Pneumatic clutch & brake combination The machine impresses with a highly extensive standard equipment package at the highest technical level. Thanks to the use of branded components such as Siemens, PILZ, and SICK, maximum reliability and durability are ensured.

Būklė: naujas, Sheet length: 4065 mm; Sheet thickness: 10.0 mm; Total power requirement: 22 kW; Approx. weight: 14,900 kg; Dimensions (LxWxH): 4860x3170x2430 mm Our strong brand KKI CNC GUILLOTINE SHEAR, link-motion design Model AS 4010 has everything you need for perfect cutting. Hnodpfx Adohp Dkbomek KKI CNC-guided guillotine shear Thanks to a robust and durable mechanical and hydraulic system, a precise CNC-controlled backgauge with ball screw, as well as a user-friendly CNC control unit, our shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, greater sheet thicknesses and cutting lengths are available upon customer request. The long service life of our shears is due to their particularly robust construction with a fully welded frame. The entire machine body, the cutting beam, and the backgauge are highly resistant to torsion and deformation, ensuring the highest cut quality at all times. By inputting sheet thickness and material type, the CNC controller automatically calculates the necessary cutting angle and cutting gap. Our strong brand KKI CNC GUILLOTINE SHEAR, link-motion design Model AS 4010 has everything you need for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, long-lasting frame construction - Automatic adjustment of cutting gap - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, link-motion design Model AS 4010 has everything you need for perfect cutting. With our patented blade support system, the upper blade can be finely adjusted and stabilized—ensuring precise, high-quality cuts. This prevents so-called banana cuts. Technical data: Sheet thickness: 10 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 23 Backgauge: 1,000 mm via CNC Motor power: 11 kW Cutting speed (0.5 - 3°): 23–9 cuts/min Throat depth: 350 mm Oil tank: 200 L Length: 4,830 mm Width: 2,300 / 2,955 mm Height: 2,130 mm Weight: 11,150 kg • Link-motion design • CNC control: - Backgauge - Cutting angle - Cutting gap - Cutting length • Ball screw for the backgauge • Ball transfer table • Side stop 1,500 mm • 2 support arms, 1,000 mm each • Cutting line illumination • 1,000 mm upward folding finger guard Optional pneumatic sheet support, EURO 8,420 We have numerous references!

Būklė: naujas, Pressing force: 150 t Ram adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10–125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes per minute: 50–90 Machine and equipment conform to CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7 - 1200* Stroke adjustment: directly via operator panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: full steel construction Guidance system: internal and external eccentric guides Crankshaft: made of hardened 4140 steel Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand control and foot pedal operation possible Lubrication: automatic lubrication system Overload protection: hydraulic Protective device: safety enclosure for the working area Hnsdpfotqwtdsx Admok External connections: 8-pin inputs & outputs on the PLC (for signal exchange & extensions) Vibration damping: rubber mats under machine feet (1 pair – 4-fold) Voltage/Frequency: 400 V / 50 Hz Fuse: 32 A required Standards: Machine and equipment in compliance with CE guidelines Control unit: 19-inch Siemens touchscreen Technical data: - Operation: inching mode / single stroke / continuous stroke - Pressing force: 150 t - Table plate: 750 x 1000 mm (fixed table plate) Stroke length: 10–125 mm, automatic stroke adjustment via PLC - Ram plate: 500 x 800 mm (Ø 55 mm pin mount & T-slots as per customer specification) - Strokes per minute: 50–90 1/min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1800 mm - Width: 1500 mm - Height: 2600 mm - Approx. weight: 9500 kg - Ram adjustment: 40 mm (automatic adjustment)

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 13.0 mm Total power requirement: 18.5 kW Approx. weight: 11,700 kg Dimensions (LxWxH): 4,000 x 1,700 x 1,800 mm - Technical Data: Sheet thickness: 13 mm Cutting length: 3,200 mm Cutting angle: 2.0° Back gauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,200 mm Width: 2,050 mm Height: 2,100 mm Weight: 11,700 kg Equipment: Swing cut design NC preselection control ELGO P 40 T Touch with back gauge and cutting gap adjustment from the front via EURO P 40 Touch control unit Motorized back gauge up to 1,000 mm Clear operator panel mounted on swing arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers 1,000 mm flip-up finger guard Hnsdpsd Ab Hmjfx Admjk 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade with 4 usable edges Upper blade with 2 usable edges Qualified customer service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Būklė: naudotas, Profesionali matavimo plokštė iš granito – žinoma Mitutoyo / Planolith kokybė (pagaminta Vokietijoje). Idealiai tinka kokybės kontrolei, įrankių dirbtuvėms bei metrologijai. Parametrai: • Stalo matmenys: apie 1200 x 800 mm • Storis: apie 170 mm • Svoris: apie 460 kg • Tikslumo klasė: DIN 876/0 (didelis tikslumas) • Leistinas nuokrypis: 0,009 mm • Faktinis nuokrypis: 0,00273 mm • Gamintojas: Planolith GmbH / Mitutoyo • Pagaminimo šalis: Vokietija • Komplekte: tvirta plieninė bazė Privalumai: • Labai aukštas matavimo tikslumas • Stabili konstrukcija – sunkus granitas slopina vibracijas • Puikiai tinka matavimams, ženklinimui, detalių kontrolei Hnodeyw Ubqspfx Admsk • Profesionalus įrenginys • Paruošta darbui Būklė: Naudotas gaminys – yra įprastų naudojimo žymių (matomi įbrėžimai ant paviršiaus), tačiau visiškai veikiantis ir išlaiko visas eksploatacines savybes.

Būklė: naujas, Sheet thickness: 6 Hjdoflvl Ajpfx Admsnk Bending length: 2550 Top roll diameter: 190 Pre-bending: 5 Sheet length: 2550 Model: MRM-S 3-Roll Motorized Asymmetric Plate Rolling Machine Steel-welded frame – Motorized adjustment of the rear roll Options: Hardened rolls: €1,800 Extended roll shafts: €500 Section rolls: €750 Digital display: €800 All prices excl. VAT.

Būklė: naujas, Slėgis: 250 Eiga: 450 Stalo ilgis: 1.500 mm Siurblio galingumas: 35 Variklio galingumas: 15 Svoris apie: 2.500 kg Dirbtuvių presas: Variklio ir rankinis valdymas Šoninėmis kryptimis pastumiamas cilindras Hema siurblys, Caproni Manometras Hnedpfxjit E N Us Admok Naudojimo instrukcija CE Pagaminta Turkijoje Atramų atstumas: 1.500 x 450 mm

Būklė: naujas, Slėgis: 60 t Stovo pravažiavimas: 900 x 300 mm Variklio galia: 3 kW Greitis: 8 Greitis: 13 Matmenys (Ilgis x Plotis x Aukštis): 1500 x 850 x 2450 mm Svoris apie: 700 kg Kėlimas: 300 mm Standartinė komplektacija: Aukštos kokybės hidraulinis presas, gali būti valdomas tiek rankiniu, tiek variklio būdu. Cilindrus galima šoniniu būdu perkelti. CE sertifikatas Slėgio reguliavimas 1 metų garantija Manometras Naudotojo vadovas (rankinis) Stovo tarpas: 900 x 300 mm Hjdpfov Akw Hsx Admjnk

Būklė: naujas, Slėgis: 100 Variklio galia: 4 Išmatavimai (Ilg.xPl.xAukš.): 1.600 x 850 x 2.500 Alyvos talpa: 29 Siurblio galia: 14,5 Greitis: į priekį 8,5 mm/sek, atgal 13,43 mm/sek Svoris apytiksliai: 1.000 Stovo plotis: 1000 x 350 Standartinė komplektacija: Aukštos kokybės hidraulinė presas, gali būti valdoma tiek rankiniu, tiek motoriniu būdu. Cilindrus galima šoniniu būdu perstumti. CE sertifikatas Slėgio reguliavimas Hsdonzwhaopfx Admsnk 1 metų garantija Manometras Naudotojo vadovas (popierinis) Papildomai: Stovo plotis: 1200 x 400 mm -> papildoma kaina 750 Eur

Būklė: naujas, Slėgis: 120Variklio galia: 4Montavimo aukštis: 1250Eiga: 400Matmenys (I x P x A): 2.050 x 950 x 2.520Alyvos užpildymas: 29Siurblio našumas: 14,5Greitis: į priekį 7,70 mm/sek, atgal 12,63 mm/sekSvoris apie: 1.300Cilindras: 200 Dirbtuvių presas: - Variklio ir rankinis valdymas - Perstumiamas cilindras - IE-3 varikliai - Siurblys: Hema arba Caproni - CE Hsdjiay U Espfx Admenk - Manometras - Eksploatacijos vadovas - Atstumas tarp stovų: 1250 x 400

Būklė: naujas, Slėgis: 200 Hedpfx Aonzwhdsdmenk Eiga: 400 Stalo ilgis: 1 500 Siurblio galia: 27,5 Variklio galia: 9 Svoris apie: 2 100 Dirbtuvių presa: Variklio ir rankinis valdymas Šoninis cilindro poslinkis Siurblys Hema arba Caproni Manometras Naudojimo instrukcija pridedama CE sertifikatas Pagaminta Turkijoje Rėmo vidinis plotis: 1500 × 400 mm

Būklė: naujas, Slėgis: 80 Variklio galia: 3 Montavimo aukštis: 900 Kėlimas: 300 Matmenys (I x P x A): 1.650 x 850 x 2.400 Svoris apie: 850 Cilindras: 180 Greitis: 7,54 Greitis: 10,90 Standartinė komplektacija: Aukštos kokybės hidraulinė presas, kuri gali būti valdoma tiek rankiniu, tiek motorizuotu būdu. Cilindrus galima pastumti į šoną. CE sertifikatas Slėgio reguliavimas 1 metų garantija Manometras Naudotojo vadovas (rankinis) Stovo plotis: 900 x 300 mm Nuotrauka yra simbolinė. Hodeicidnspfx Admsnk

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Precision cross table with leadscrew guard, featuring dovetail slideways significantly improving table rigidity and allowing for backlash elimination in the feed mechanisms. Cross Table Description: - The cross table is robustly constructed from high-quality materials. - It is perfectly suited for use with drills, milling machines, etc., providing precise positioning for boring or drilling operations. Hnjdpfx Adjvu Tp Aomjk - The leadscrew guard prevents chips from entering the feed mechanism. - An additional advantage of this table is the rack-and-pinion scale, which facilitates constant visual monitoring of the table's position on the X and Y axes. - Vernier: 2.5mm/0.02mm.

Būklė: naujas, Stroke length (max.): 400 mm; Pump capacity: 45cc–65 l/min; Motor: 22 kW; Table height: 750 mm (without support plate) – 820 mm (with support plate); Table area: 3500 mm x 2000 mm – Clear width: 2200 mm; Bridge travel: 2800 mm; Motor: (IE-3) 22 kW; Return speed: 50 mm/s; Dimensions (LxWxH): 3500 x 3200 x 3600 mm; Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table area: 3500 x 2000 mm – Clear width: 2200 mm - Support surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (1800 mm total) - Installation height: max. 1200 mm (Distance table/support plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Motor: 22 kW (IE-3) - Pump: 45 cc – 65 l/min (KAWASAKI) - Forward travel speed: 10–5 mm/s - Return speed: 50 mm/s - Table height: 750 mm (without support plate) – 820 mm (with support plate) Accessories: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7" display - Control cabinet mounted to the side wall of the bridge - Swiveling operator panel - Pressure adjustable via touchscreen (50–300 tons) - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (wired) - Stroke length adjustable via distance sensors - 400 V 50 Hz 3 phase - Rotation lock for the cylinder - Cylinder laterally movable via drive motor - Bridge traversable via drive motor - Light curtain protection in bridge area (Datalogic) - Cylinder piston mandrels: Ø 200 / 400 / 600 mm long - Extension mandrels (3 pcs.) included (Symbolic photo) Hodsr Etulepfx Admjnk

Būklė: naujas, Stroke length (max.): 400 Pump output: 45cc-65 Hsdor D U I Djpfx Admenk Motor: 22 Table height: (without support plate) 750 mm - (with support plate) 820 mm Table dimensions: 3000 mm x 2000 mm - Clearance: 2200 mm Bridge travel: 2300 mm Motor: (IE-3) 22 Return speed: 50 Capacity: 3000 kN (280 bar – 300 tons) - Cylinder: Ø 370 mm - Table dimensions: 3000 x 2000 mm; Clearance: 2200 mm - Bridge travel: 2500 mm - Lateral cylinder travel: 900 + 900 mm from center (1800 mm total) - Installation height: max. 1200 mm (distance from table or support plate to cylinder piston) WITHOUT MANDRELS - Stroke length: 400 mm - Pump: 45cc – 65 l/min - Advance speed: 10 – 5 mm/sec - Return speed: 50 mm/sec - Motor: 22 kW (IE-3) - Table height: 750 mm (without support plate) – 820 mm (with support plate) Accessories: - Hydraulics: DUPLOMATIC - Control: LENZE & SCHNEIDER - Control cabinet mounted on the side of the bridge - Pressure adjustment via rotary control valve - Speed adjustable via throttle valve - Cylinder chrome-plated - Remote control (with cable) - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3-phase - Rotational safety device for cylinder - Cylinder can be moved laterally via drive motor - Bridge can be moved via drive motor - Soft starter for motor - Cylinder piston mandrels: Ø 200 / 400 / 600 mm length - Extension mandrels (3 pcs.) included (Symbolic photo)

Būklė: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: STYLE CNC Machines, įrankių magazino lizdų skaičius: 24, variklių gamintojas: FANUC, Pristatymas pagal susitarimą Ref.: 24F048 Gamybos metai: 2025 Būklė: Parodų salės Hsdpfx Adew Ty S Sjmenk Specifikacijos: - X ašis: 4000 mm - Y ašis: 1000 mm - Z ašis: 1000 mm - Pagrindinis variklis 26 kW (S6) - 8000 aps./min - BT-40 - Automatinis įrankių keitiklis (24 pozicijos) - Nuotolinis aptarnavimas (IXON) + tinklo jungtis - Stipresnis aušinimo siurblys su purkštuvu - Atnaujinta iki naujausios STYLE programinės versijos

Būklė: naujas, Svoris apie: 1.400Variklio galia: 5,5Alyvos talpa: 34Siurblio našumas: 20Matmenys (I x P x A): 2.000 x 950 x 2.550Slėgis: 150Stovo plotis: 1400 x 400Eiga: 400 Dirbtuvių presas: Hodpfxelzm E Ho Admsnk - Motorinis ir rankinis valdymas - Šoninis cilindro poslinkis - Caproni Hema siurblys - Manometras - Naudojimo instrukcija - CE Pagaminta Turkijoje Stovo plotis: 1400 x 400 mm

Būklė: geras (naudotas), Technical data for pallet racking beams: Racking system: Link 51 Type: Boltless XL Included in delivery: 01x Pallet racking beam, used Colour: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Connector: 4 HK (hooks) Clear span: 2,700 mm Maximum load per pair of beams: 900 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing longitudinal beams against accidental lifting Hnsdpfx Adekv Urwomjk Further information about the pallet racking beam: Type 4 BST beams are used for placing chipboard, steel panels, or similar, which then finish +/- flush with the top edge of the beam. This results in no loss of height. Furthermore, the front of the step beam protects the shelves or insert panels from damage. These beams are not intended for pallet storage but serve as picking levels; i.e., for storing cartons, small parts, and similar items.

Būklė: geras (naudotas), Technical Data for Pallet Racking Beam: Racking System: Link 51 Type: Boltless XL Scope of Delivery: 01x Pallet racking beam, used Material color: yellow Beam type: B120ZC Box profile: 120x50 mm Connector: 3 hooks Clear span: 2,700 mm Max. load per pair of beams: 2,700 kg, with evenly distributed load 02x Locking pins, new Finish: fully galvanized For securing the crossbeams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Hnjdpfxslwuw Us Admjk This item is offered for collection only. If transport or shipping of this item is required beyond that, additional costs will be incurred, which can be requested from us separately depending on the place of delivery and scope of delivery.

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Our robust brand KKKletzer CNC GUILLOTINE SHEAR, swing-cut design, Model SWT has everything you need for cutting. We have also raised the standard for our swing-cut models and now supply our guillotine shears with automatic blade gap adjustment via the E21S touchscreen control at no extra charge. Technical data: Hedpfonwt A Aex Admsnk Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.5 ° Motor power: 7.5 kW Strokes per minute: 12 Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 5,100 kg • Rigid swing-cut design Blade gap adjustment via control unit - Backgauge - Blade gap - Cutting length • Ball screw spindles for the backgauge • Ball supports in the table We have many references!