Dirbtuvių presai

KK Kletzer Werkstattpresse 80 to

Sąlyga: naudotas, Gamybos metai: 2015, mašinos/transporto priemonės numeris: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. forward speed: 90 mm/sec Pressing speed: 10 mm/sec Hodpfxofxyhfj Agisi Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table opening: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom built for you. Production time is approximately 5 months from receipt of payment. Forward stroke: The press moves to the zero position at up to 90 mm/sec. Positioning accuracy is 0.5 mm or better. Return stroke: The press returns to the end position at up to 90 mm/sec. Accuracy is also 0.5 mm or better. Holding time can be set from 0 to 10 seconds (in 0.1 second increments). Pressing force is adjustable from 10 to 40 tons in bar. Additional control details: The control unit can be locked via a key switch. The key switch provides the following functions: Manual operation with two-hand control at 9.5 mm/sec in setup mode. (Stop in any desired position by releasing the switches.) Manual operation for bending tasks at up to 9.5 mm/sec using two-hand operation and automatic return to the top dead center when the two-hand buttons are released. Automatic operation with safe tools at up to 200 mm/sec. This function is equipped with a warning label on the control panel. In automatic mode, the machine is strictly suitable for the use of fully enclosed, safe tools only. This information is prominently displayed on the front of the machine. In manual setup mode, the machine can also be operated with two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A rotary key switch enables switching between automatic and manual mode. Position adjustment for top dead center (OT) and bottom dead center (UT) and the switching position for speed reduction are performed via sensors adjustable along a chrome-plated rod. The sensor can be finely adjusted via a clamping thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and can bend sheet metal via two-hand operation, but it can also punch, notch, and bend in automatic mode with appropriate safety tooling.

Gamybos metai: 2022, Sąlyga: naujas, La macchina ZIM T1200 è in grado di produrre tubi con diametro da 300 mm a 1200 mm e altezza da 500 mm a 2500 mm mediante pressatura singola, doppia e tripla. Tubi da 150 mm e 200 mm possono essere realizzati su richiesta specifica. Le macchine possono essere progettate in versione semiautomatica o completamente automatica in base alle esigenze. Sulle macchine automatiche utilizziamo microprocessori PLC della marca SIEMENS. Le macchine sono dotate di tramoggia per malta e sistemi di riempimento della malta. I materiali prodotti possono essere trasportati nell’area di essiccazione tramite carrelli da trasporto o carrelli elevatori. La produzione avviene su pallet di produzione. Hsdpfjibbiksx Agiji I materiali fino a 800 mm di diametro vengono trasportati nell’area di essiccazione tramite carrelli da trasporto, mentre i tubi con diametro superiore a 800 mm possono essere spostati con il carrello elevatore. Per una produzione rapida, anche i tubi con diametro superiore a 300 mm possono essere portati nell’area di essiccazione con il carrello elevatore. La macchina esegue la produzione tramite pressa idraulica e vibrazione. Il sistema di vibrazione della macchina è una progettazione speciale degli ingegneri ZIM ed è dotato di sistema di raffreddamento a olio con apposita unità dell’olio. Questo sistema può essere controllato elettronicamente. Lo speciale telaio rinforzato della macchina garantisce una produzione affidabile e duratura senza errori.

Sąlyga: naudotas, Gamybos metai: 2000, Grinding length: 800 mm Centre height: 150 mm CNC control: FANUC Grinding wheel dimensions max.: 400 x 63 x 127 mm Workpiece weight: 120 kg Motor power: 7.5 kW Grinding wheel speed range: 45 m/s Swivel range: +45/-15° degrees Workpiece spindle speed: 22-313 / 51-750 rpm Workpiece headstock swivel: +/- 90° Tailstock quill taper: MT 4 X-axis travel: 355 mm Z-axis travel: 4.0 mm Feed rate: 0 to 7.5 m/min Machine weight: approx. 4.0 t Required space (LxWxH): approx. 3.7 x 2.2 x 1.9 m Includes: - Coolant system Hedpfx Asu Hag Nogiji - Enclosed steady rest - Diamond dresser - Open steady rest - 3 grinding wheels - 3 flanges - Internal grinding spindle attachments

Sąlyga: beveik kaip naujas (parodų įrenginys), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of supply: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) Hedewbil Sspfx Agioi ➤ Fronius FK 4000 FC Cooling Unit – Standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit switches off if the water cooling fails or overheats to protect the torch package. These features would typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our view the most functional wire feed case, as the wire spool is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – Each set is supplied with a 5-meter connecting hose between the power source and wire feed case, providing more flexibility and better handling. Take the wire feed unit from the main machine to hard-to-reach areas! The connecting hose is neatly mounted on a hook at the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder available on the market. ➤ Binzel Torch Package – With up/down regulation of amperage directly at the torch. ➤ Ground Cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools This machine enables welding of almost all materials, including aluminium, steel, and stainless steel (V2A). It features pulse wire programmes and is also suitable for MIG brazing (CuSi), which is frequently used in the bodywork sector. Further options available at extra cost For example: Fronius AW4000/AW5000 Job Master torch package (display on the torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE FULL INVOICE PROVIDED Inspection possible in Vienna 1230, Austria! ✔ Insured pallet shipping without issue! ✔ We are also available on WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the machines in? To clarify: We purchase nearly new used machines, disassemble and meticulously inspect them, replace any worn parts if necessary, and only after a successful test weld do we release them for sale. "All" machines are clean, with no burn holes in the displays and no significant burn marks or dents scattered across the units! You are buying an item that is also ⭐visually appealing and does not look run-down! ►►►Will we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you possess a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal pickup. ►►►Why buy from us? We are specialists in this Fronius welder series, always stocking 60-80 units – exclusively Fronius, no other manufacturers! We know these machines in detail and do not sell anything we are not thoroughly familiar with.

Gamybos metai: 2005, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: C9 15840, Profilbürstmaschine Tagliabue LB 2 Modell: LB 2 TECHNISCHE DATEN: Hodpsg Rn Iaofx Agioi Baujahr: 2005 Tagliabue Kanten-Schleifmaschine mit 4 oszillierenden Schleifaggregaten. Zwei vertikale Walzen und zwei innenliegende Querwalzen für das Querbürsten.

Sąlyga: naudotas, Single-column hydraulic press, straightening press, C-frame press ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Model RSD 1500 - 125 Machine No. 317 / 690, year of manufacture approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Hodpfod Swtajx Agioi Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power pack - Ram surface with 4 threads M16 and 20 mm guide groove, center locating hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space L x W x H: 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Sąlyga: naujas, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm - Movable cylinder Hedpfx Agjilvb Nsioi - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Sąlyga: naujas, Gamybos metai: 2021, Model: i7 Working area: 3048*1524mm Machine overall dimensions: 4960×2280×2200mm Hodpfsg D Nypsx Agiei Laser output power: 3000W / 2000W / 1500W X / Y-axis positioning accuracy: ±0.05mm X / Y-axis repositioning accuracy: ±0.03mm X / Y-axis max. linkage speed: 100m/min 1. Compact design with full protection The small footprint combines comprehensive protection with enhanced operator safety. 2. Active anti-collision feature Effectively reduces the risk of laser head damage, helping you lower maintenance costs. 3. Cast iron machine bed Excellent shock absorption ensures the cast iron bed maintains its form and provides optimal mechanical performance over time. 4. Burr-free thin sheet cutting The i series can cut the edges of thin sheets cleanly and guarantees vibration-free edges.

Sąlyga: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, PLC valdomos šlifavimo funkcijos Stalo matmenys: 1500 x 700 mm Didžiausia stalo apkrova: 1400 kg Maksimalus atstumas tarp špindelio ir stalo: 800 mm (magnetinio stalo aukštis 60 mm) Prizminės „V” kreipiančiosios sujungtos su plokščiomis kreipiančiosiomis su Turcit-B danga Pagrindinio variklio galia: 11 kW Šlifavimo diskas: D405 x 50 x d127 mm Staklių svoris: 8100 kg Priedai ir įranga: - Elektromagnetinis stalas 1500 x 700 mm - Automatinis demagnetizavimas - Automatinis padavimas - Nuimamas rankinis ratukas - Aušinimo sistema su popierinio juostos filtru - Magnetinis separatorius Hsdpfxexywgfj Agioi - Šlifavimo špindelis prieš 1,5 metų profesionaliai perrinktas Gera būklė. Vis dar naudojama gamyboje. Yra Vengrijoje.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16,000 kg Dimensions (L x W x H): approx. 9800 mm x 5300 mm x 2000 mm Control: Siemens Sinumerik 840 D Laser type: TruFlow 4000 W Max. sheet thickness: 20 mm 4000 mm x 1250 mm Feed rate: 3400 mm Dismantling, loading, and crane work are not included in the machine price – additional charges apply for all services. NC: 88631 – Resonator/HD Pump 1: 87603 – Beam On / Pump 2: 53667 Technical parameters: - Model: KNC/H 1500/65 - Maximum temperature: 650 °C Hjdovtm Szepfx Agisi - Recommended operating temperature range: 300°C – 600°C - External dimensions approx. (W x H x D): 2800 x 3200 x 2100 mm * Height including door mechanism for hydraulic opening - Internal dimensions (W x H x D): 1500 x 1000 x 1000 mm - Number of heating zones: 1 - Max. batch weight: 1000 kg - Heating power: 48 kW - Furnace weight: approx. 1300 kg - Voltage: 3/PEN 400/230 V AC 50 Hz - The damper is part of the furnace, serves for automatic temperature control inside the furnace, and is controlled by the controller’s program. - Including technical documentation in Slovak - Temperature field measuring and optimization report in accordance with DIN 17052-1 ΔT10°C (measured in an empty furnace at Tmax) - Technical documentation is in Slovak. Manufacturer: LAC, s.r.o., Czech Republic Year of manufacture: 2021 This is an electric furnace with a heating system consisting of resistance heating elements located near the fan unit. The fan circulates the atmosphere in the heating chamber over the heating branches, thereby heating both the working atmosphere and the load inside the furnace. The furnace working chamber is equipped with a separately controlled heating unit at the rear wall. For optimal temperature distribution throughout the working space, the furnace is fitted with a radial circulation fan with a horizontal shaft. The circulation fan drives the heated air through the circulation channels of the recirculation insert. All rotating parts are protected against accidental contact. The temperature profile of the device is managed by a programmable PID INDUSTRIAL controller. This controller allows up to 30 heat treatment programs to be created, depending on process technology requirements and the properties of the batch being processed. See attached drawing for dimensions.