Karcher Parts Wash Pc 60/130 T 2016Y pirkti naudotą (95 998)

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Parts cleaning system / spray cleaning system type CM13 2-tank system (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is manually inserted and removed by the operator using a feed trolley positioned in front of the machine (detachable / mobile). Usable height: 800 mm Washing tank: Volume: 430 liters, spray pressure: 6.0 bar Rinsing tank: Volume: 280 liters, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control system: Siemens S7-1200 with KTP700 touch panel Includes the following equipment: Isdpsv Tm Ayefx Alreic + Automatic water replenishment for both tanks + Automatic chemical dosing 1-10% (Dosatron) + Special spray system (can be activated as required) for small parts (= E-spray system) + Side channel blower with height-adjustable air knife system (blow-off drying) + Steam extraction including condensate return + Weekly timer for electric heating + Prepared for retrofitting an oil separator + Medium filtration via bag filters (manufacturer: Eaton, Topline) in both circuits (washing and rinsing) + Outer cladding with stainless steel sheet + Complete system fully insulated + Tanks separated into two modules; fully insulated (different temperatures possible) + Removable filter baskets in the return flow + Stainless steel circulation pumps incl. mechanical seal and soft starter The system is on display at the Glogar Technology Center and is used exclusively for washing trials.

Būklė: naujas, Gamybos metai: 2026, galia: 7,5 kW (10,20 AG), spaudimo jėga: 60 t, eigos ilgis: 160 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 90 mm/s, gerklės gylis: 320 mm, ramplokštės ilgis: 2 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, Standard Equipment Stroke: 160 mm Daylight (Lower – Upper Die Opening): 380 mm Throat Depth: 320 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Machine Features - Dual-cylinder upper beam bending system - Steel frame and upper beam construction providing high static and dynamic rigidity - Upper beam movement supported by fiber slide bearings - High-strength balancing shaft and eccentric bearing system for parallelism - Motor-controlled angle adjustment with mechanical stroke system inside the cylinder - Large working opening suitable for use with various dies - Ton capacity adjustment and bottom dead point setting via NC control unit - Hydraulic safety system against overpressure - Double-speed operation: rapid approach, bending, and fast return - CE-compliant multifunctional foot pedal and emergency stop system - Compact hydraulic power unit with HAWE or Rexroth components - Remote service support with Siemens, Pizzato, and Balluff electrical equipment - LEUZE safety system and learning mode - NC control unit with 500 program storage and 200 lines per program - Easy program upload and download via USB - Standard punch and die set - NC-controlled motorized X-axis back gauge (600 mm) - Programmable back gauge system with linear guides - 0.2 mm positioning accuracy - Motorized Y-axis angle adjustment - Movable control panel - Linear guided front support arms - Lower die centering and locking bolts - Programmable precise back gauge retract function Optional Equipment - Motorized R-axis - Special bending dies - Special dual-hand and foot-operated pedal system - DSP or FIESSLER safety systems - Extended back gauge travel - Additional back gauge fingers - Extra front support arm - Manual crowning system - Motorized crowning system Technical Specifications Bending Force: 60 Tons Maximum Bending Capacity: 4 mm Bending Length: 2100 mm Distance Between Columns: 1700 mm Stroke: 160 mm Bending Speed: 10 mm/sec Approach Speed: 90 mm/sec Throat Depth: 320 mm Daylight: 380 mm Table Width: 100 mm Table Height: 845 mm Main Motor Power: 7.5 kW X-Axis Motor: 0.75 kW Iedpfezcmbfjx Alrjic Y-Axis Motor: 0.37 kW Optional R-Axis Motor: 0.25 kW Back Gauge Travel: 600 mm Oil Tank Capacity: 120 L Machine Length: 2450 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 4340 kg Country of Origin: Turkey Manufacturer: CRONOSSTECH Makina

Būklė: naujas, Gamybos metai: 2026, galia: 4 kW (5,44 AG), spaudimo jėga: 60 t, eigos ilgis: 210 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 120 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 1 250 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB A60-1250 – 60 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A60-1250 CNC Hydraulic Press Brake is designed for precise sheet metal bending applications, offering 60 tons of pressing force and a 1250 mm bending length. With the ESA S630 CNC control unit, servo motorized backgauge system, compact frame construction, and professional tooling package, this machine ensures high precision and productivity for workshops, metalworking companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Open Height): 415 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3–4 Axis) 10” 2D touchscreen graphical interface Manual bend sequencing and collision check calculation Iijdpjzbyu Nofx Alroc Crowning and angle correction calculation Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R-axis travel: 190 mm Steel frame structure Hardened ball screw Hardened linear guide system Optional: 1000 mm X-axis travel Backgauge Fingers 2 pieces Flat type 3-stage depth (10 mm / 20 mm / 30 mm) Manual Z-axis movement Deflection preventive design for sheet support European Style Manual Promecam Upper Tool Holder E7 Quick tool change Safe operation Tool fall prevention design CRONOSSTECH Special Narrow Lower Table Available in 70 mm or 90 mm width T-slot can be implemented on request Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Ton/Meter Compatible with Amada Standard Lower Tool ES2067 4-way V-opening (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Maximum capacity: 80 Ton/Meter Compatible with Amada A-Series Open Frame Design CRONOSSTECH Premium open cabinet Wide field of view Ergonomic design Professional appearance Additional Equipment Single pedal system (P2) GIVI linear scales Top beam LED lighting Electrical panel in accordance with VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Energy-saving Standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruler measurement system Provides operator assistance Optional Features AKAS II Front Safety Laser System + PLC + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE conformity Maximum working distance: 4.3 metres Technical Specifications Pressing Force: 60 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Gamybos metai: 2026, būklė: naujas, Parts Cleaning System, Spray Cleaning Machine Type L90 Automatically operating hot water parts washer with automatic basket drive via geared motor, stainless steel wash pump (make: Lowara), circulating 3-sided spray system (from below, side, and above) with stainless steel nozzles - Basket diameter: 790 mm - Useful height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (room temp. – 90°C) Machine dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Washing cycle timer adjustable via Omron timer (minutes and hours) Complete cleaning system (interior and exterior cladding) made from stainless steel 1.4301 Water circulation system and loading basket made from stainless steel 1.4301 Iedpfohgh I Sjx Alroic Full system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction including condensate return Prepared for later installation of an oil separator The parts washer is as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Parts Cleaning Machine, Spray Cleaning System Type L800FP Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Iedsuxuv Aopfx Alroic Suction filter for pump protection Delivery: ex works, FCA

Gamybos metai: 2026, būklė: naujas, Parts Cleaning Machine, Spray Cleaning System Type L901FP Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 150 kg Iiedpjfl Ufzofx Alrjc - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Delivery: ex works, FCA

Būklė: naujas, Gamybos metai: 2026, Parts Cleaning Machine, Spray Cleaning System Type L800FP Iijdpfx Alehl H Ubsrjc Fully automatic hot water parts washing machine with basket drive powered by gear motor, housing made of stainless steel 1.4301, piping and rotary basket galvanized steel, special nozzle system with stainless steel flat jet nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Effective height: 500 mm - Max. load capacity: 150 kg - Spray pressure: 3 bar - Tank volume: 120 liters - Heating: electrically adjustable (room temperature up to 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter for pump protection Delivery: ex works, FCA

Būklė: naujas, Gamybos metai: 2026, galia: 5,5 kW (7,48 AG), spaudimo jėga: 60 t, eigos ilgis: 210 mm, darbinis greitis: 10 mm/s, atbulinės eigos greitis: 135 mm/s, gerklės gylis: 410 mm, ramplokštės ilgis: 2 100 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, dokumentacija / vadovas, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, has been developed for precise sheet metal bending applications with a bending force of 60 tons and a bending length of 2100 mm. Standard Features - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 2100 mm - Distance Between Columns: 1600 mm - ESA S630 CNC Control Unit (3+1 Axis) - 10” 2D touch graphical display - Manual bending sequence and collision detection calculation - Angle correction calculation (Crowning) - Angle measurement and correction - 2D drawing support - 2 x USB ports - Offline programming software - CRONOSSTECH Servo Motorized X Axis Backgauge System - X Axis Travel: 750 mm - Speed: 250 mm/sec - Accuracy: ±0.05 mm - Manual R axis travel: 250 mm - Steel body construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X axis travel Backgauge Fingers - Quantity: 2 - Straight type - 3-step (10 mm / 20 mm / 30 mm) - Manual Z axis movement - Structure preventing sheet sagging European Type Quick Tool Clamping System (Promecam E7) - Fast tool change - Safe operation - Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table - 70 mm or 90 mm lower table - T-slot can be applied depending on tools used Standard Upper Tool ES1260 - Tool Height: 67 mm - Tool Angle: 85° - Radius: 0.8 mm - Material: C45 - Max Capacity: 100 Ton/Metre - Amada compatible Standard Lower Tool ES2067 - 4-channel V opening (16-22-35-50 mm) - Tool Height: 60 mm - Tool Angle: 85° - Material: C45 - Max Capacity: 80 Ton/Metre - Amada compatible B Series Open Cabin Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear scales - Upper beam LED lighting - Electrical panel compliant with VDE standards - Schneider or Siemens electrical components - Hoerbiger (HAWE) hydraulic block - Eckerle hydraulic pump - Siemens drive - Energy-saving standby feature Front Support Arms - 2 standard sliding front support arms - Height adjustable - Ruler measuring system - Provides support to the operator Optional Features - Servo Motorized X + R Axis Backgauge System - Servo-driven X and R axis movements - X axis travel: 750 mm - Accuracy: ±0.05 mm - X axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers - Finger protection system - Laser-based safety system - Enhances operator safety - CE compliant - Maximum operating distance: 4.3 metres Delem DA53T CNC Control Unit (15” Touch) - 15” colour touchscreen - 2D product drawing and simulation - Angle correction calculation - Angle measurement and correction Iiodszbrfaspfx Alrec - USB data transfer - Data backup - Offline profile-TL programming - Remote access and troubleshooting Technical Specifications - Bending Force: 60 Ton - Bending Length: 2100 mm - Distance Between Columns: 1600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 870 mm - Machine Length: 3660 mm - Machine Width: 2175 mm - Machine Height: 2820 mm - Approach Speed: 160 mm/sec - Return Speed: 135 mm/sec - Bending Speed: 10 mm/sec - Oil Tank Capacity: 170 L - Machine Weight: 4290 kg - Main Motor Power: 5.5 kW - Backgauge X Axis Speed: 300 mm/sec - Backgauge R Axis Speed: 250 mm/sec This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Būklė: naujas, Gamybos metai: 2026, Automatiškai veikiantis karšto vandens detalių plovimo automatas, krepšelio pavara per reduktorių variklį, įrenginio korpusas pagamintas iš nerūdijančio plieno 1.4301, vamzdynai ir besisukantis krepšelis cinkuoto plieno, speciali purkštukų sistema su nerūdijančio plieno plokščiaisiais purkštukais, nerūdijančio plieno plovimo siurblys (gamintojas Xylem/Lowara), lygio reguliavimas kaip apsauga nuo sausos eigos. - Krepšelio skersmuo: 910 mm - Naudingoji aukštis: 520 mm - Maks. apkrova: 150 kg - Purškimo slėgis: 3 bar - Rezervuaro talpa: 190 litrų - Šildymas: elektrinis reguliuojamas (nuo kambario temp. iki 60°C) Įrenginio matmenys (I x P x A): 1.300 x 1.350 x 1.990 mm Siurblio apsaugai – įsiurbimo filtras. Iedouxuwajpfx Alrjic Pristatymas: iš gamyklos, FCA

Būklė: naujas, Gamybos metai: 2026, Parts Cleaning Machine, Spray Cleaning System Type L901FP Fully automatic hot-water parts washer with basket drive powered by geared motor. The housing of the unit is made of stainless steel 1.4301; all piping and rotating basket are zinc-plated steel. Special nozzle system equipped with stainless steel flat spray nozzles. Washing pump made of stainless steel (manufacturer: Xylem/Lowara). Level control for dry-running protection. Iisdpfx Ajndcbyjlrsc - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 190 liters - Heating: electrically adjustable (ambient temp. to 60°C) System dimensions (LxWxH): 1,300 x 1,350 x 1,990 mm Suction filter for pump protection Delivery: ex works, FCA

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, DeckelMaho DMCU 60T Pagaminimo metai: 2001 Valdiklio gamintojas: Heidenhain Valdiklio tipas: TNC 426 Einantis X: 600 mm Einantis Y: 525 mm Einantis Z: 500 mm Veleno apsukos: 6300 1/min Įrankio tvirtinimas: SK40 Greitfėdis X, Y / Z: 18/17 m/min Padavimo diapazonas X, Y, Z: 10000 mm/min Universalus stalas: 750x530 mm Priedai: drožlių rinkimo dėžė, aušinimo sistema ir dokumentacija Būklė: Veikiantis – amžių atitinkantis nusidėvėjimas Iodoy T Irnepfx Alreic

Gamybos metai: 2018, būklė: geras (naudotas), Mechaninių dalių plovimo mašina, visi techniniai duomenys nurodyti skelbimo nuotraukose, modelis: CBR 60 T. Mašina labai geros būklės. Kaina be PVM pagal sąskaitą. Iiodpfxey D Afde Alrsc

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, X ašies eiga apie: 1.524 mm Y ašies eiga apie: 660 mm Z ašies eiga apie: 610 mm Stalo dydis apie: 1676 x 660 mm Stalo apkrova apie: 1500 kg Įrankių keitiklis: 24 padėčių Įrankių laikiklis: SK 40 Veleno greitis: 12.000 aps./min. IKZ 20 bar 3D matavimo zondas Renishaw Tinklo sąsaja elektr. rankenėlė Kišeninis frezavimas su salomis Sinchroninis sriegimas Iodpfx Alsy R A Sweroic DXF programinė įranga Grandininis grandymo transporteris * Veleno darbo valandos apie 1937 (veleno keitimas 2019) * apie vienos pamainos darbas

Būklė: geras (naudotas), Gamybos metai: 2011, HURCO CNC apdirbimo centras VMX 60 t X ašis 1.500 mm Y ašis 660 mm Z ašis 600 mm Stalo dydis 1.680 x 660 mm Isdoxvtfpjpfx Alreic Veleno sūkių dažnis 12.000 aps./min Įrankių tvirtinimas SK40 Įrankių keitiklis 24 pozicijos Su WinMax valdymu Komplekte: Aušinimo skysčio sistema (aukšto slėgio) Veleno aušintuvas Vandens purkštuvo pistoletas Drožlių apsaugos kabina Signalizacijos lemputė mašinos veikimo būsenai Valymo sistema drožlių šalinimo pagalbai Mašinos šviestuvas Mašinos pėdų rinkinys Mašinos vadovas CD formatu 2 spalvoti ekranai (tekstui ir grafikoms) Simuliacijos grafika Įrankių ir medžiagų biblioteka Nuimamas elektroninis rankinis valdymo pultas Kišeninis frezavimas su salomis Sinchroninis sriegimas (sriegimas be kompensacinės įvores)

Būklė: geras (naudotas), rida: 379 221 km, galia: 353 kW (479,95 AG), pirmoji registracija: 04/2006, kuro tipas: dyzelinas, padang padangų: 50 procentas, ašių konfigūracija: 6x2, kuras: dyzelinas, spalva: kitas, vairuotojo kabina: miegamoji kabina, pavaros tipas: mechaninis, emisijos klasė: Euro 3, lovų skaičius: 1, Gamybos metai: 2006, Įranga: ABS, elektrinis langų reguliavimas,

Gamybos metai: 2000, būklė: labai geros būklės (naudotas), 1 x detalių plovimo įrenginys Malmkvist Turbex 2000 Iiodpfx Ajy I Nr Ejlrec Pagaminimo metai: apie 2000 Su šildymu Galimi 3 programų variantai: - Plovimas + džiovinimas - Plovimas - Džiovinimas Plovimo ir džiovinimo laiką galima reguliuoti. Labai geros būklės. Techniniai duomenys: Didžiausias užpildymo svoris: 20 kg Būgno skersmuo: 400 mm Būgno ilgis: 500 mm Šildymo galia: 6 KW Sauso oro pūstuvui bei plovimo medžiagai Temperatūra reguliuojama 0–80°C Priedai: 3 x plovimo krepšeliai su 3 skirtingų skylių skersmenimis (1,5/2,5/5 mm) + Lentyna (savitarnos gamyba) 1 x ritininė konvejerio linija su pakrovimo/iškrovimo nuožulna Eksploatacijos instrukcija + elektros schemos Įrenginys gali būti apžiūrimas įjungtas.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 60 t, eigos ilgis: 400 mm, stalo plotis: 700 mm, stalo ilgis: 700 mm, tarpas tarp stulpų: 700 mm, atitraukimo jėga: 20 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 60/20 TON FOUR-COLUMN HYDRAULIC DEEP DRAWING PRESS General Description The CRONOSSTECH 60/20 ton four-column hydraulic deep drawing press is a robust and compact press solution designed for precise metal forming, deep drawing, and flow forming applications. Its four-column construction ensures consistent parallelism and perpendicularity tolerances throughout the pressing process. The frame, manufactured from St52 grade steel, undergoes stress-relief via vibration. Slide and pot systems can be controlled independently, and stroke and pressure settings can be precisely adjusted via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, an IE3 class motor, and an automatic lubrication system, the press offers durable, safe, and efficient operation. Its PLC-controlled structure minimizes operator errors. This model is an ideal solution for small and medium-scale flow forming, deep drawing, die testing, and auxiliary pressing applications. Key Advantages - Four-column rigid press frame structure - Independent stroke and tonnage control for slide and pot - System adjustable via touchscreen panel - High precision and repeatability - Low maintenance requirements, extended service life Areas of Use - Metal flow forming applications - Deep drawing operations - Die testing and prototype manufacturing - Metalworking and auxiliary production lines Iodpfxsx N Ulgs Alrsic ⚙️ STANDARD AND TECHNICAL SPECIFICATIONS TYPE: Four-column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 pcs. Induction hardened and chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (SLIDE): 60 Tons CAPACITY (POT): 20 Tons DISTANCE BETWEEN COLUMNS: 700 × 700 mm PARALLELISM TOLERANCE: 120 microns/meter PERPENDICULARITY TOLERANCE: 60 microns/meter STROKE (SLIDE): 400 mm STROKE (POT): 100 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 500 mm WELDING STRESS RELIEF: Vibration stress-relief WELDING PROCEDURE: WPQR and WPS certified by TÜRK-AK in compliance with EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 7.5 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER SLIDE FAST DESCENT SPEED: 150 mm/sec SLIDE FLOW FORMING SPEED: 12 mm/sec SLIDE RETURN SPEED: 170 mm/sec POT TABLE ADVANCE SPEED: 30 mm/sec MAIN CYLINDER INNER DIAMETER: Ø 175 mm – Ck45 POT CYLINDER INNER DIAMETER: Ø 100 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3100 mm APPROXIMATE PRESS WIDTH: 1050 mm APPROXIMATE PRESS DEPTH: 1050 mm BOTTOM TABLE HEIGHT FROM FLOOR: 1000 mm PRIMARY FILL VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable via screen) SLIDE / POT STROKE & TONNAGE ADJUSTMENT: Adjustable via screen SYSTEM & PRESS STATUS INFORMATION: Viewable on screen DIE MEMORY: Adjustable via screen LINEAR POSITION SENSOR: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Gamybos metai: 1973, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 699, Press force: 40 t Table size: 670 x 470 mm Ram area: 670 x 470 mm Clearance between columns: 620/470 mm Max. installation height: 740 mm Iiedpfxsy Dpbo Alrjc Pressing speed: 20 mm/s Rapid traverse: 50 mm Ejector force: 3 t Electrical connection: 380 V, 9.5 kW Space requirement: 2200 x 1875 x 3000 mm Weight: 2400 kg

Būklė: geras (naudotas), Gamybos metai: 2009, Ekskavatorius KOMATSU PC130 Nr. KMTPC202L02080252 9602 val. 72,1 kW Iijdpfx Aoyax Avolrjc 2009 metai serijos numeris: 80252 - ekskavatorius be kaušo

Gamybos metai: 1997, būklė: geras (naudotas),

Būklė: geras (naudotas),

Gamybos metai: 1993, būklė: labai geros būklės (naudotas), 1 x Parts Washing Machine Brand: Armleder Model: W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Installation dimensions (L x W x H): 0.8 x 1 x 1.1 m The machine can be inspected at any time under power at our warehouse. Isdonl Ekrepfx Alrsic

Būklė: naudotas, Gamybos metai: 1971, mašinos/transporto priemonės numeris: 7130, Total pressing force: 60 t Throat depth: 275 mm Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Isdpjuqcxnjfx Alroic Table clamping area approx.: 740 x 470 mm Strokes per minute: 14 - 100 min⁻¹ Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Machine weight approx.: 3.5 t

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), HD Washing Table – HD Brush Washing Table This washing table features an adjustable 60 bar high-pressure pump, enabling cleaning within a closed working chamber. Cleaning is performed using an aqueous degreaser (10kg included in delivery) at approximately 45°C. - Viewing window with integrated lighting - Media filtration via cartridge filter - Convenient operation using foot switch - Includes rotary table Technical specifications: - Working area: 800 x 600 mm - Usable height: 400 mm - Load capacity: 50 kg - Operating pressure: adjustable up to max. 60 bar - Pump capacity: 14 l/min Isdod H Umrepfx Alrjic - Washing temperature: adjustable up to max. 45°C - Tank volume: 100 l - Heating power: 3,000 W - Total power: 7.0 kW - Voltage: 400 V AC 1 P+N+PE; Frequency: 50 Hz - Machine weight: approx. 140 kg - Overall dimensions with lid open: 1,100 x 910 x 2,020 mm

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Spray Cleaning System – Parts Washing Machine with Hinged Door Single-tank design (Washing), tank capacity 320 liters Basket: LxW 1,100 x 1,100 mm Usable height: 800 mm Max. loading weight: 700 kg Washing pump pressure: 4.3 bar, pump output: 5.5 kW Heating (electric) 20 kW; heatable up to 80°C Control system: Siemens Logo Iedpfx Asd Rkmxolrjic Includes: - Steam extraction and condensate return system - Automatic water refill - Automatic chemical dosing (adjustable 0.8–5.5%) - Full system insulation - Entire system constructed from stainless steel 1.4301 - Basket rim (removable on one side) - 7-day timer for electric heating - Electric spray pipe, h = 450 mm - Preparation for oil separator (electrical & mechanical) provided New machine; currently being used for washing trials in our technology center.