Cedima Cts 375.2 pirkti naudotą (668)

Būklė: naudotas, Gamybos metai: 2018, Savaiminis svoris: 400 kg Matmenys (I x P x A): 160 x 130 x 130 cm Kaina: Pagal užklausą - Ypatumai: - Aprašymas: Komplekte bakas ir džiovintuvas - Pagaminimo metai: 2018 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Transportavimo matmenys: 1600 mm x 1300 mm x 1300 mm (i x p x a) - Transportavimo svoris [kg]: 400 kg Dsdpfx Afoyuga Ej Ajkl - Transportavimo vienetai [vnt.]: 1 Finansinė informacija: PVM: Nurodyta kaina be PVM PVM / maržos apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas galimi bet kuriuo metu visai pramonės įrangai. Yorick Diebels

Būklė: naudotas, Freshline šaldiklis MP Tipas IQF 1220.15/3070 tinka naudoti su azotu visiškai nerūdijančio plieno maksimali produkto aukštis: ± 100 mm talpa: ± 5 000 kg/val. produkto apkrova (kg/m): ± 13-14 kg/m 400/460V, 50/60Hz, 3PH+PE, 110A, 32kW Pneumatika: 1 Nm3/h, 5-7 bar(g) LIN skystas azotas 3 bar(g) grynoji juostos plotis: ± 1 220 mm grynoji juostos ilgis: ± 16 800 mm matmenys (I x P x A): ± 17 700 x 2 600 x 2 600 mm (maks. atidarytas) Dkodjy Nkd Eopfx Af Ajl labai geros būklės

Būklė: naujas, Gamybos metai: 2025, Rotaciniai peiliai Modelis: WEIMA, GROSS, VECOPLAN Tipas: WL, WLK, GAZ, VAZ Pagaminimo metai: 2025 Naujas / Paruoštas naudojimui iš karto 1. Peilis 40x40x25 M12 (PC) Dodpfx Afsxw Nrbo Ajkl 2. Peilis 40x40x25 M12 (KR) 3. Peilis 40x40x25 M14 (KR) 4. Peilis 40x40x20 M12 (KR) 5. Peilis 40x40x16 M10 (KR) Gaminame atsarginius peilius ir dalis smulkintuvams bei trupintuvams. Užsakydami nurodykite peilio tipą.

Būklė: naujas, Gamybos metai: 2025, Sietai keturių ašių smulkintuvams Modeliai: RS, ZM, ZMK, GZ Dkjdpfx Afsxn Nams Ajl Tipas: SB-450, SB-760, SB-960, SB-1030, SB-1230 Metai: 2025 Nauja detalė / paruošta naudoti Esame smulkintuvų ir trupintuvų atsarginių peilių ir dalių gamintojas. Užklausose nurodykite gamintojo pavadinimą ir mašinos tipą.

Būklė: naujas, Gamybos metai: 2025, Rotaciniai peiliai Modelis: LINDNER Tipas: MICROMAT Metai: 2025 Nauji / Paruošti nedelsiam naudojimui 1. Peilis 43x43x20 2 vnt. (KR) Dodpfxjxn Nyas Af Askl 2. Peilis 43x43x20 2 vnt. (K8) 3. Peilis 43x43x23 1 vnt. (KR) 4. Peilis 43x43x23 2 vnt. (K8) Gaminame atsarginius peilius ir dalis trupintuvams bei smulkintuvams. Užsakant prašome nurodyti peilio tipą.

Būklė: naujas, Gamybos metai: 2025, Rotacinis peilis Modelis: LINDNER Tipas: ANTARES Pagaminimo metai: 2025 Naujas / Paruoštas naudoti iš karto Gaminame atsarginius peilius ir dalis smulkintuvams ir trupintuvams. Dkedpfx Asxn Nvhof Asl Užsisakydami nurodykite peilio tipą.

Būklė: naujas, Gamybos metai: 2025, Grandiklio peilis Modelis: WEIMA, GROSS, UNTHA Tipas: ZM30, GZ30, RS30 Pagaminimo metai: 2025 Naujas / iš karto paruoštas naudoti 1. 8Z-66 peilis 2. 4Z-66 peilis Esame atsarginių peilių ir dalių gamintojai trupintuvams ir smulkintuvams. Djdpfxoxn I R Rs Af Aekl

Būklė: naujas, Gamybos metai: 2025, Pjovimo peiliai Modelis: WEIMA, GROSS, UNTHA Tipas: ZM40, GZ40, RS40 Pagaminimo metai: 2025 Dkjdpfx Aoxn H Stjf Asl Nauji / paruošti naudoti iš karto 1. 1Z-86 peiliai 2. 2Z-86 peiliai Esame smulkintuvų ir trupintuvų atsarginių peilių bei dalių gamintojas.

Būklė: naujas, Gamybos metai: 2025, Grandiklio peilis Modelis: WEIMA, GROSS, UNTHA Tipas: ZM40, ZMK50, GZ40, RS40, RS50 Pagaminimo metai: 2025 Naujas / iš karto paruoštas naudojimui 1. 8Z-86 peilis 2. 4Z-86 peilis Esame smulkintuvų ir trupintuvų atsarginių peilių ir detalių gamintojas. Dkodpfx Afjxn Iyfj Ajl

Būklė: naujas, Gamybos metai: 2025, Pjovimo peiliai Modelis: WEIMA, GROSS, UNTHA Tipas: ZM40, ZMK50, GZ40, RS40, RS50 Djdpfxjxn H Sae Af Aekl Gamybos metai: 2025 Nauji / paruošti naudoti iš karto 1. 1Z-115 peilis 2. 2Z-115 peilis 3. 3Z-115 peilis Esame smulkintuvų ir trupintuvų atsarginių peilių ir dalių gamintojai.

Būklė: naujas, Gamybos metai: 2025, Pjovimo peiliai Modelis: WEIMA, GROSS, UNTHA Tipas: ZM30, GZ30, RS30 Pagaminimo metai: 2025 Nauji / iš karto paruošti naudojimui 1. 1Z-66 peiliai 2. 2Z-66 peiliai Esame trupintuvų ir smulkintuvų atsarginių peilių ir dalių gamintojai. Dedpfsxn Ibvex Af Aekl

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: FF102-062, • Gesamtmaße in mm; Dkjdsd D I Hqspfx Af Aol • Stromversorgung 5,0 kW; • Stromversorgung 400 V; • Druck 3–5 bar; • 102 Einzel-Nadeln, nicht federbelastet, 2 mm; • Bandbreite 400 mm.

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Parduodu: Autonominė masinavimo mašina su valdikliu, JOHAN LASKA U.SOHME, LASKA tipas, gamyklinis numeris 6/2017; pagaminimo metai 1993. Galia 3,5 kW, maitinimas 3x400V. Išskleistos visos komplektacijos matmenys: 2600x1100x1900 mm; transportavimo matmenys: 2100x1100x1900 mm. Būgno talpa apie 840 l. Grynasis kaina: 900 eurų. Djdpsyur Uhsfx Af Askl

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We offer a tabletop gas sterilizer with neutralizer in perfect condition. Year of manufacture: 2021 Brand: H.W. Andersen Products Limited, Anprolene Model: Anprolene 74i, Abator Anprolene Dsdpfx Afsukgxxs Aokl

Būklė: naudotas, Wir bieten den Inject Star P60 Separator an – eine Industriemaschine für Advanced Meat Recovery (AMR), konzipiert für Fleisch- und Geflügelverarbeitungsbetriebe sowie Fabriken, die ihre Rohstoffausnutzung maximieren und Produktionsverluste minimieren möchten. Der Separator P60 arbeitet auf Basis einer Hydraulikpresse mit Brechkammer, die Fleisch von Knochen und harten Geweben trennt und anschließend durch einen Lochfilter presst. Funktionsweise des Inject Star P60 Separators: In einer speziellen Zuführeinheit werden die Knochen in die Presskammer geführt und vorverdichtet. Anschließend trennt ein lineares Hydrauliksystem das wertvolle Fleisch von den Knochen und drückt es durch einen Lochfilter (Standard 8 mm). Das Ergebnis ist eine hochwertige Fleischmasse mit geringem Kalziumgehalt und minimalem Temperaturanstieg während des Prozesses, was sich positiv auf die Qualität und Funktionalität des Endprodukts auswirkt. Das AMR-System Inject Star ermöglicht die Rückgewinnung von bis zu ca. 35 % Fleisch aus roten Knochen bei geringem Verschleiß der Verschleißteile und vergleichsweise niedrigen Betriebskosten. Technische Daten: Dodpfjycc H Rex Af Askl Hersteller: Inject Star Modell: P60 Stromversorgung: 400 V, 3Ph, N Installierte Leistung: 18 kW Leistung: 900 kg/h Leistung mit Knochenbrecher: 1.500 kg/h Verfahrenstyp: hydraulisches Presssystem mit Lochfilter (8 mm, optional 2 mm) Abmessungen (L x B x H): 4.900 x 1.900 x 2.900 mm Gewicht: ca. 4.100 kg Vorteile des Inject Star P60 Separators: Hohe Fleischausbeute aus Knochen – bis zu ca. 35 % hochwertiges Fleisch können aus roten Knochen zurückgewonnen werden, was die Wirtschaftlichkeit des Rohstoffes deutlich erhöht. Geringer Kalziumgehalt – Das Endprodukt zeichnet sich dank präziser Presskammer und Lochfiltersystem durch einen niedrigen Kalziumwert (< 1.000 mg/kg) aus. Minimaler Temperaturanstieg – Der Separationsprozess bewirkt nur eine geringe Temperaturerhöhung des Fleisches, was sich positiv auf Farbe, Textur und technologische Eigenschaften auswirkt. Niedrige Betriebskosten – Die verschleißarme Konstruktion und der geringe Wartungsaufwand reduzieren die laufenden Kosten sowie das Risiko kostspieliger Stillstandszeiten. Erweiterungsmöglichkeiten – Laut Herstellerangaben kann der Separator als Vorstufe mit einem Knochenbrecher zusammengeschaltet und mit zusätzlichen Weichgewebeseparatoren sowie verschiedenen Beschickungssystemen kombiniert werden.

Būklė: labai geros būklės (naudotas), 200m³ Stainless Steel Tanks Dedpfofngl Njx Af Askl Quantity: 3 units 180m³ Stainless Steel Tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Bottom thickness: 5.1 mm We offer transport with our special trailer to all regions of Europe!

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 Dkodpovz Hq Tofx Af Ajl - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 Dsdpjvz Hq Hefx Af Askl The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details. Dedpfx Afovz Hqys Aokl

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 Dsdpjvz Hqtsfx Af Ajkl The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm Dsdpfxevz Hqme Af Askl - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 Dkodpfovz Hqgsx Af Ajl The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm Dkedpevz Hhxjfx Af Ael - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: naudotas, Power supply, rectifier, power supply unit, switched-mode power supply Dedpfx Ajd Tn Dcof Ajkl -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Būklė: geras (naudotas), Pressure vessel, compressed air tank, pressure cylinder, -Manufacturer: UM Alloy Products, stainless steel compressed air vessel -Type: 316L MAWP 9 BAR -Capacity: approx. 5 liters Dedpfx Afsin Hq Ej Aokl -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm -Weight: 5.3 kg