Chicago Pneumatic Cpvs40 pirkti naudotą (7 177)

Gamybos metai: 2015, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, The Sv‑63P pneumatic butt welding machine features a robust vertical frame design incorporating vertical clamping jaws and a sliding movable platen. Clamping is performed via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages connected to a horizontal cylinder for pressing the workpiece together. The carriage travel is limited in both directions—for both pressing and opening—and the clamping jaw distance can be adjusted according to the cross-section or diameter of the workpiece. Clamping with a preset jaw distance is actuated by foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding modes. After welding, the clamping jaws are lifted and the carriages return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage regulation is achieved using thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws through laminated conductors. Inside the machine, a power board with a thyristor and a main control board ensure smooth operation. An air preparation unit with a pressure regulator for setting the clamping force is located on the machine cover. The main switch to activate the unit is located on the controller for setting welding parameters. Kledoyqr Sxspfx Am Tot

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Pneumatic clamp ensuring precise pressing of the material onto the saw table during cutting. This significantly increases the accuracy and quality of the cut, facilitating and speeding up panel sizing operations. The clamp is very easy to install and operate. Application of a woodworking pneumatic clamp for a panel saw The lack of proper pressure securing the panel on the saw table can cause a number of issues that significantly impact the efficiency and quality of the cutting process. These issues include: - Uncontrolled chipping: Without solid clamping, the panel isn't held securely on the table, which during cutting can result in uncontrolled chips or splinters. This poses a safety risk to operators and may damage both tools and workpieces, raising production costs. - Excessive material waste: Insufficient pressure can allow the panel to shift during cutting, leading to improper cuts and increased material loss. This may necessitate additional cuts or even complete rejection of the workpiece. - Frayed panel edges: Without stable clamping, vibration and inaccurate cutting may occur, resulting in frayed edges. This not only detracts from the panel’s visual appeal but also from its usability, especially for finishing materials. Benefits of the 3200 mm two-zone pneumatic clamp for panel saws: The solution to these problems is the use of a pneumatic clamp, which ensures the material is firmly pressed against the panel saw table. Key benefits include: - Increased cutting accuracy: The pneumatic clamp ensures stable, even holding of the material, resulting in higher cutting precision and preventing uncontrolled chipping and frayed edges. - Improved cutting quality: With a stable hold, the quality of the cut is significantly improved. Panels are cut cleanly and undamaged, enhancing their value and appearance. - Faster, easier panel processing: Reliable clamping allows operators to work more efficiently and safely, accelerating panel processing and increasing production output. - Easy installation and operation: The pneumatic clamp is straightforward to install and use, requiring no complex procedures and allowing for easy operation. - Two-zone clamping: The pneumatic clamp features two zones (each side equipped with two cylinders), allowing independent control for each side of the saw table. This provides greater flexibility and allows for adaptation to various materials and production requirements. In summary, the pneumatic clamp is a reliable solution for improving panel cutting quality, precision, and efficiency, helping save time and material while reducing the risk of damage and accidents. Technical specifications Clamp length: 3200 mm Klodpfovxtcqox Am Tot Material height: 100 mm Number of cylinders: 4 Operating pressure: 2.0 bar Manufacturer: Cormak

Gamybos metai: 2019, būklė: labai geros būklės (naudotas), Load capacity: max. 360 kg Extendable: 700 mm x 1400 mm Klsdpfx Amopu D Dze Tjt Rotation angle about longitudinal pivot: 360°

Būklė: naudotas, pneumatic linear actuator, usable stroke 625 mm Kljdpfxehkr Dte Am Tet

Būklė: geras (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: 271464-01-01, Pasiūlymas 26075 Techniniai duomenys: - Lyninis balansuotojas, keliamoji galia apie 60 kg - Lankstus strypas, išsikišimas apie 3,6 m - Pasukimo sritis apie 375° - Kablio eiga apie 2,0 m - Bendras konstrukcijos aukštis apie 3,2 m Ksdpfx Ajyv En Eom Telt - Pneumatinė jungtis 6 bar - Svoris apie 300 kg

Būklė: labai geros būklės (naudotas), Pagaminimo metai: 2007 Komplektą sudaro: 1. Pneumatinė presa Gamintojas: Schmidt Tipas: 24 Spaudimo jėga: 9 kN Dviejų rankų valdymas 2. Juostos vedlys štampavimui / reljefiniam spaudimui Gamintojas: SAEP Tipas: HSG 3. Valdymo sistema Gamintojas: Siemens Tipas: Simatic Panel 4. Papildoma įranga Didinamasis šviestuvas Ksdpfxjx Eiuxe Am Telt Darbo stalas Ergonominė darbo kėdė su apsaugomis

Gamybos metai: 2001, būklė: geras (naudotas), Top-closing stapler with clinching anvils. For coil staples. Designed for closing filled folding boxes made of single and double-wall corrugated cardboard. Cost-effective closure of corrugated cardboard boxes with clinched and overlapping flaps using clinching anvils. Suitable for single and double-wall corrugated board. Adjustable penetration depth to match the type of carton being used. Ideally suited for use in packing lines where maximum uptime and performance are required. Klsdpfx Asva Nq Hem Tet • Housing made of hardened steel ensures long service life. • Clinching anvils with instant return: up to 20 staple cycles per minute. • 1,000 staples per coil: up to 10 times less frequent reloading compared to conventional staplers. For ergonomic operation, use with a balancer in combination with a pivot arm system and appropriate spiral hose. See > accessories. Pneumatic stapler MEROLOCK • for spiral staples CR 1/34, with 18 mm arm length, • fitted with sound damper, • with automatic anvil return, • clinching anvils are specially hardened for extended service life.

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas), Pneumatic tipper and leveler for band saws. Kjdod Sl H Hjpfx Am Tslt

Gamybos metai: 2006, būklė: beveik kaip naujas (naudotas), Pneumatic tipper and leveler for band saws. Kodpfx Aedy A A Njm Tslt

Būklė: naujas, Pressure 4.5 kN Stroke 40 mm Throat depth 95 mm Working height from to 95 - 240 mm Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 24 kg Dimensions L x W x H 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are mainly used when long-stroke parts need to be processed with constant force. Outstanding Technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston, ensuring a constant and smooth operation • Oil-resistant sealing elements Special features of the PND series • Spindle secured against rotation • In the PND 85/S, spindle return is achieved via only one cylinder chamber for additional air savings • Working height fine adjustment is easy, quick and precise in two steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke-limiting ring on the piston rod Ksdpfx Amofv Av Sj Tolt Additional advantage: Faster cycle time and air savings

Būklė: naujas, Pressure 8.5 kN Stroke 40 mm Throat depth 95 mm Working height from/to 95 - 240 mm Kodpfxofv Awae Am Telt Table size 160 x 110 mm Spindle diameter 25 mm Machine weight approx. 27 kg Dimensions (L x W x H) 160 x 230 mm Direct-acting pneumatic presses deliver full pressing force across the entire stroke length. They are primarily used when long-stroke parts need to be processed with constant force. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-of-stroke cushioning on both sides • Double guide rings in the piston for smooth and steady operation • Oil-resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via one cylinder chamber—resulting in additional air savings • Working height fine adjustment is straightforward, fast, and precise in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle time and air savings

Gamybos metai: 2022, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: P0000581, Klijavimo įrenginys iš Alba Industries GmbH, kaip detalių padaviklis 24VDC / pneumatinis Kledoyybitopfx Am Tot Platus komponentų pasirinkimas iš Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner ir kt. Sumontuotų dalių sąrašą rasite priede PDF. Yra EPlan ir pneumatinė schema, gali būti peržiūrima pagal poreikį ir susitarus dėl apžiūros vietoje.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, kuro tipas: dyzelinas, kuras: dyzelinas, stabdžiai: retarderis, spalva: tamsiai raudona, pavaros tipas: automatinis, Įranga: ABS, Bluetooth, borto kompiuteris, oro pagalvė,

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, kuro tipas: dyzelinas, kuras: dyzelinas, stabdžiai: retarderis, spalva: pilkas, pavaros tipas: automatinis, Įranga: ABS, Bluetooth, borto kompiuteris, oro pagalvė,

Būklė: naujas, Gamybos metai: 2026, 10 t smėliavimo vežimėlis smėliavimo įrenginiui su pneumatiniu pavara. Klodpfx Asyyxfrsm Tst - Pneumatinė pavara 10 t apkrovai - Apkrova 10 t - Matmenys: Ilgis=2000mm Plotis=2000mm Aukštis=500mm - Skirta bėgių sistemai - Su paviršiais ruošinių laikikliams - Pasukamas stalas kaip parinktis

Būklė: geras (naudotas), Doppel-Seiten-Eckenschneider Ksdpswungzefx Am Tjlt Sehr guter Zustand. Dies ist ein professionelles Produktionsgerät zum Abrunden von Ecken. Die solide Bauweise gewährleistet eine präzise Arbeitsweise. Ausgestattet mit zwei Schneidköpfen. Wechselbare Messer. Einstellbare Abstichränder. Fußpedalsteuerung. Ein Satz 8-mm-Messer im Lieferumfang enthalten. Stapelhöhe ca. 80 mm. Gewicht 100 kg. Leistung: 20 Takte/min. Druckluftanschluss erforderlich.

Būklė: naujas, Gamybos metai: 2026, Pneumatinė presas, skirta aliuminio gamybai, įvairioms griovelėms, štampavimui ir gręžimui naudojant aukščio reguliuojamą cilindrą ir valdomą pėdos pedalu. Maksimali darbinė jėga – 3000 kg esant 8 atm slėgiui. Pneumatinis slėgis: 6-8 atm Naudingas tarpas: 260 mm Darbinis eiga: 0-35 mm Pakuotės matmenys: 500 x 320 mm Stūmoklio greitis: 23 mm/s Apytikslės oro sąnaudos per ciklą: 25 litrai Stalo matmenys: 530 x 340 mm Laisvas aukštis: 260 mm Reguliuojamas eiga: nuo 0 iki 35 mm Kedpfx Amspa Nw Se Tslt PASIRINKIMAI: Sukamasis spintelė / pagrindas PAKAVIMAS IR IŠMATAVIMAI: 600 x 490 x 600 (86 kg) Standartinė pakuotė – medinis narvas Laukiame Jūsų žinutės! Plantec Maschinen GmbH

Būklė: naujas, spaudimo jėga: 3 t, Jėga 32 kN, eiga 100 mm Ksdpfoyxmppjx Am Tslt

Būklė: naudotas, Electric dual screwdriver unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit features a pneumatic double stroke controlled via Festo valves and cylinders. Various monitoring systems for full automation are installed. Technical specifications: - Torque electric screwdriver: 0.6 Nm - Torque gearbox: max. 10 Nm - Speed: max. 20,000 rpm - Rated voltage: 3~ 0-230 VAC - Power consumption: max. 7 A (per screwdriver) - Pneumatic long-stroke cylinder: 80 mm - Pneumatic short-stroke cylinder: 20 mm - Pneumatic total stroke: 100 mm - Screwdriver spring stroke: 20 mm - Distance between the two screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Operation requires a Bosch Rexroth LT303 power module (power module not included) Both Screwdriver 1 and 2 each consist of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive Component details: Rexroth electric screwdriver unit Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Power consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Rexroth gearbox unit Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Rexroth encoder Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Klsdehxvu Eepfx Am Tjt Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rexroth straight drive Type: 2GA82 SZ2 1/4" SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm A 7m motor connection cable is included in the scope of supply. Overall dimensions (W x H x D): approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Būklė: naudotas, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwdriving applications. Screwdriving unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed for full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight-drive output Kjdpofx Hyfofx Am Telt Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset output Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long-stroke: 30 mm Pneumatic short-stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gear unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Overall length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Overall length: 118.5 mm Straight-drive output Rexroth Type: 2GA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool fitting: 1/4" square Max. torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Overall length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4"SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool fitting: 1/4" square Max. torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Overall length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Max. load capacity: 14 kg Handyflex outreach: 250 to 650 mm Handyflex outreach swivelled: max. 860 mm Swivel radius at full outreach: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition The blue steel pallet as a baseplate is not included. The blue steel baseplate is not part of the delivery.

Būklė: naudotas, Double diaphragm pump with pneumatic drive DEPA type DH40-FA-ZRT Air-operated diaphragm pump, dual pump Serial No.: B1802498 Year of manufacture: 09.05.2018 Maximum temperature: 130°C Size: 40 Maximum particle size: 16 mm Suction lift: approx. 2 m Suction lift when primed: approx. 9 m Operating pressure: max. 7 bar Air connection: 3/8" Suction connection: 1 1/2" Discharge connection: 1 1/2" - self-priming - aluminium housing - diaphragm plates made of stainless steel - diaphragm made of nopped E4® PTFE composite - balls made of PTFE - ball seats made of stainless steel Required space (L x W x H): 370 x 270 x 450 mm Kledpfx Ameib D H Uj Tot Net weight: 15 kg Very good condition

Būklė: naudotas, Pneumatic press, compressed air press BOSCH type Serial no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram surface: Ø 45 mm Maximum installation height: 235 mm Clamping shank bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar Klsdeh U Dtuspfx Am Tet - Pressing force is infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic two-hand safety controls - Mounted on metal base frame with wooden panels Space requirements (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table substructure: 140 kg Good condition

Būklė: naudotas, Pneumatic folding and bending machine FASTI Type 606 - 11 - 1.0 Kljdpfxsdzqble Am Tot Folding machine for pre-bending sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is a double-over edge of sheet metal, created by folding it once over itself to increase its rigidity. Folding produces a rounded edge, reducing the risk of injury from cutting on a sharp sheet metal edge. Ideal for sheet metal processing for sheet metal furniture, cladding panels, or for air duct and silencer construction.

Būklė: naudotas, Pneumatic Screwdriver, Air Screwdriver DESOUTTER Pneumatic screwdriver, inline screwdriver for assembly technology Model: SD 140-AR510-S4Q Torque range: 0.6–14.0 Nm Speed: max. 510 rpm Operating pressure: 6 bar Air consumption: 8.7 l/s Ksdpfefgrrhex Am Telt Bit holder: M6 - Selector switch for forward/reverse operation (rotary ring control) - Without automatic shut-off - Pneumatic control line Ø 4 mm - Pneumatic connection for screwdriver function min. Ø 10 mm - Aluminum bracket for handling device - Screw feed tube Ø 12 mm (internal diameter) Dimensions (L x W x H): 60 x 46 x 870 mm Weight: 2.8 kg Good condition 4 units available, price per screwdriver

Būklė: naudotas, TOX Clinching Unit – Pneumatic-Hydro TOX Press Hydro-Pneumatic Press TOX Pressotechnik KRAFT PAKET Model: CRS 03.62 Serial No.: 207599.2 Year of manufacture: approx. 2005 Pressing force: max. 80 kN = 8 tons Throat depth: 20 mm Installation height: 32 mm - integrated clinching tool - pneumatic valve for actuation - for joining by mechanical interlock (clinching) - for creating a form-fit connection between two sheets without piercing or heating the material - mounted on stand - with basic electrical control and foot switch Net weight: 230 kg Klsdpfsdz Sqqex Am Tet From a production line, sold without electrical control unit