Pneumatiniai cilindrai

Bosch 0 822 342 002

Būklė: naujas, Gamybos metai: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - NC control system - includes bending pin - includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely variable stroke adjustment - Adjustable working speed Max. working stroke: 10 mm/sec Return stroke: 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table Iajdsqvm Ukopfx Aaujr - Weight: 1,000 kg - Bending capacity: Flat material: 150 x 22 mm Round tube: up to 60 mm

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter Iedpfx Aaong Amksujar • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Maximum workpiece height: 200 mm Capacity flat: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed Iajdpfx Aajhgib Njusr - Fully enclosed table - The ZOPF design enables quick tool changes without any loss of precision - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring there is no loss of precision even under high loads - With the universal tool holder and various tools, you can work with maximum flexibility.

Būklė: naujas, Balkaya Profile Ring Bending Machine HBM 80 Technical Specifications: Tool mounting, shaft: 80 mm Tool size: 245 mm Working speed: 4.5 m/min Motor: 4 kW Hydraulics: 30 tons Dimensions (LxWxH): 1450 x 1050 x 1800 mm Weight: 1400 kg 3 driven rollers Hardened standard rollers Iodpsh T Ulnofx Aausar Hardened and ground tool mounting, shaft Mobile control panel Horizontal and vertical working positions Digital display Compliant with CE standards

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: Isdpfsndk N Ajx Aauear • Welcome to test production in our in-house demo room • Consultation and information session on your premises • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Tubend Horizontal Bending Machine HP 40 Pressing force: 40t Stroke: 300 mm Iodpoi Elunofx Aaujar Max. tool height: 250 mm Flat bar, upright: 200 x 24 mm Flat bar, upright: 250 x 16 mm Working speed: 10.0 mm/sec Return speed: 10.0 mm/sec Table: 600 x 1200 mm Total power requirement: 4 kW Motor: 400 Volt 50 Hz Weight: 1190 kg Dimensions (LxWxH): 1250 x 650 x 1300 mm Oil capacity approx.: 40.0 l Equipment: Hydraulic horizontal bending machine Robust work surface made from stabilized steel Machine constructed of hardened and ground forged steel NC touch screen control 1x tool set Double foot switch

Būklė: beveik kaip naujas (parodų įrenginys), Festo Pneumatic Cylinders RA1942 Manufacturer: Festo Cylinder, Iasdok Abl Njpfx Aauor Some units still in original packaging. The listed prices are per piece. 8 x ADVU-25-10-P-A €86.39 each 7 x ADVU-40-15-P-A €128.46 each 8 x ADVU-40-20-A-P-A €131.49 each 4 x ADVU-25-20-A-P-A €89.60 each 8 x DNC-63-160-PPV-A €198.00 each 1 x DNC-50-125-PPV-A €165.03 7 x DNC-40-80-PPV-A €139.50 each 1 x DNC-40-200-PPV-A €149.01 2 x DNU-32-50-PPV-A Price upon request 3 x STA-50-30-P-A-SA Price upon request 1 x FENG-40-200-KT+DNC-40-200-99A €624.99 1 x FENG-40-200-KT €474.99 4 x DMM-25-15-P-A €46.38 each 1 x DFM-32-50-PA-GF €228.55 8 x DNC-32-40-PPV-A €120.54 each 1 x DNC-32-50-PPV-A €121.15 10 x DNC-32-80-PPV-A €122.93 each 10 x DNC-40-50-PPV-A €137.13 each 3 x DNC-50-80-PPV-A €160.87 each 2 x DNC-50-50-PPV-A €157.85 each 5 x DSNU-25-25-PPV-A €43.28 each 4 x ESNU-25-20-P-SA Price upon request 1 x DSNU-25-10-P-A €36.59 2 x DSNU-20-20-P €34.65 each 1 x ESNU-16-25-P Price upon request 1 x DSNU-20-20-P-A €34.65 1 x DSNU-20-50-PPV-A €40.77 2 x DGPL-40-450-PPVA-KFB Price upon request 7 x DNC-40-500-PPV-A €172.76 each 7 x DSNU-32-80-PPV-A €52.08 each 4 x DSNU-32-60-PPV-A €57.12 each 6 x DZF-25-12-A-P-A €110.52 each 1 x DZF-32-A-?-A Price upon request 2 x DZF-32-125-P-A-SA €126.57 each 2 x DSNU-25-125-PPV-A €45.05 each 1 x DSNU-25-125-PPV-A+2 SENSORS €101.30 1 x DSNU-25-300-PPV-A €48.35 1 x DNC-63-160-PPV-A-KP €815.28 2 x DNC-63-160-PPV-A €198.01 each

Būklė: naujas, Cisternos de presión 270 L/500 L/1000 L/2000 L/3000 L, 11 bar Isdpforbyyhsx Aausar

Būklė: naujas, Bar stock solid 35 mm Square bar solid 35 mm Raw diameter max. 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Axle diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 0.9 x 0.95 x 1.4 m Profile bending machine with: Iaedpfsk Dvhhsx Aausr - Foot pedal for forward/reverse operation - Hardened special steel shafts - 1 set of standard rollers - 2 driven rollers

Būklė: naudotas, Semi-automatic tube bending machine, mandrel tube bending machine MOBITEC model BAH 1-2 KOTTMANN und BERGER GmbH Serial no.: Year of manufacture: For simultaneous bending of two steel tube sections up to Ø 12 mm Max. bending angle: 90° Max. tube diameter: 12 mm Mandrel length: approx. 65 mm Iasdspu R Nvopfx Aauor Rated power: 3.5 kW Compressed air: max. 6 bar / approx. 1 liter per bending cycle Power supply: 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine supplied without bending tools and without tool storage pin 25 x 183 mm - Only 1 bending mandrel included (see photos). Dimensions (L x W x H): 1000 x 1000 x 1500 mm Weight: 390 kg Good condition