Arburg 420 C 1000-250 (2000) pirkti naudotą (71 870)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Bad Berleburg
1 135 km
Įpurškimo liejimo mašina
Arburg570C 2000-350
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2000, 1x naudotas Arburg 570C 2000-350
Metai: 2000
Sraigė: 45 mm
Branduolio traukos: 1x
Iiedsxc Eqqopfx Alrjc
Karštas kanalas: 6x
įsk. konvejerinę juostą
Mažas skelbimas
Łódź
478 km
Liejimo mašina
KraussMaffeiKM 250-2000 CX Blue Power
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans
Year of manufacture: 2019
Injection Unit:
Screw diameter: 70 mm
Ijdozc Nw Ajpfx Alrjic
Shot weight: 980 g
Injection pressure: 1,877 bar
Dosage volume: 1,077 cm³
Clamping Unit:
Clamping force: 250 t
Tie bar spacing: 630 x 630 mm
Platen size: 995 x 1,050 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: MC6 - touchscreen
Additional equipment:
Very good technical condition
Operating hours: approx. h in automatic mode
Euromap 67
Robot interface
Air valve with vacuum measurement x 1
Air valve x 1
Hydraulic core pull x 3
Pneumatic core pull x 1
Hot runner control x 16
Injection unit hardened - bimetallic
Energy-efficient machine – equipped with a system of 3 hydraulic pumps with variable output
Parallel movements
Proportional valve on injection unit – precise injection
Additional oil filtration pump
Robot: Sepro Industrial Robot SR S5-35HL S4 Trans
Year of manufacture: 2015
5-axis robot: 4 axes powered by electric servomotors (X, Y, Z, B); C-axis
Touch control panel
Robot safety package
Robot with adapter, conveyor belt, and safety enclosure
Purchase of the robot and conveyor belt at an extra charge
Dimensions:
Weight: 20,100 kg
Length/Width/Height: 6.50 x 2.20 x 2.30 m
All machines offered are started up by our service technicians before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.
Price: On request
Mažas skelbimas
Pegnitz
1 029 km
Konvejerių juostos
SchumaArburg (Schuma) 290 x 1.600, 2000
Skambinti
Būklė: naudotas, Gamybos metai: 2000, bendras svoris: 60 kg, Pristatymo sąlygos: FCA Pegnitz
Iodpfx Alsx Iwc Ejreic
Pristatymo laikas: pagal susitarimą
Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis
Mažas skelbimas
Vengrija
1 266 km
Krauss Maffei 250 - 1000 CX
KraussMaffei250 - 1000 CX
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, veikimo valandos: 44 678 h, spaudimo jėga: 2 500 kN, Ši "Krauss Maffei 250 - 1000 CX" hidraulinė liejimo mašina buvo pagaminta 2017 m. Jos prispaudimo jėga yra 2500 kN, o didžiausias formos svoris - 3430 kg. Mašinoje sumontuotas linijinis robotas LRX 150, užtikrinantis geresnį automatizavimą. Apsvarstykite galimybę įsigyti šią "Krauss Maffei 250 - 1000 CX" hidraulinę liejimo mašiną. Susisiekite su mumis dėl išsamesnės informacijos.
• Atstumas tarp kaklaraiščio strypų (H x V): 630 x 630 mm
• Plokštės matmenys: 995 x 1050 mm
• Formos montavimo aukštis (min.): 330 mm
• Atstumas tarp plokščių: 1150 mm
• Didžiausias formos svoris: iš viso 3430 kg (fiksuotas: 1715 kg / judantis: 2286 kg)
• Šerdies traukos valdymas: 4 įrenginiai (2 x fiksuota plokštė/FAP; 2 x judanti plokštė/BAP)
• Uždaromasis purkštukas: 4 kartų hidraulinė kaskada
• 1 įpurškimo įrenginys (kodas 1000):
• Sraigto skersmuo: 55 mm
• Įpurškimo slėgis: 1904 bar
• Taktinis tūris: 523 cm3
• Šūvio svoris (PS): 1,5 kg: 476 g
• Įpurškimo srautas (PS): 404 g/s
• Šarvuotas įrenginys: Taip (ZE 33.00)
• Spausdintuvo sąsaja: Taip
• Condition: Gerai prižiūrimas ir aptarnaujamas
Iijdpsyhbq Ejfx Alrjc
Papildoma įranga
• Automatizavimas: Linijinis robotas LRX 150 su B/C ašių deriniu (įskaitant KM linijinį robotą LRX 150)
• Karšto bėgio valdymas: 12 kartų
• Aušinimo sistema: 4 x HB 100
Mažas skelbimas
Eschweiler
1 269 km
Liejimo mašina
KraussMaffeiKM 250 - 2000 CX
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 62 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 500 kN, varžto skersmuo: 70 mm, darbinio tūrio: 1 077 cm³, Uždarymo blokas:
Uždarymo jėga: 2500 kN
Įrankio atidarymo jėga, maks.: 169 kN
Judamos plokštės atidarymo jėga: 86 kN
Judamos plokštės uždarymo jėga: 68 kN
Tvirtinimo plokštės matmenys (A x P): 995 x 1050 mm
Laikiklio atstumas (A x P): 630 x 630 mm
Formos atidarymo eiga: 820 mm
Minimalus įrankio įdiegimo aukštis: 330 mm
Atidarymo plotis: 1150 mm
Išstūmiklio eiga: 200 mm
Išstūmiklio jėga pirmyn/atgal: 58/28 kN
Įpurškimo blokas:
Sraigto diametras: 70 mm
Ls/D santykis: 20
Įpurškimo slėgis: 1877 bar
Eigos tūris: 1077 ccm
Šūvio svoris (PS): 980 g
Įpurškimo srautas: 385 ccm/s
Sraigto sukimosi greitis: 220 1/min
Plastifikacijos pajėgumas: 76 g/s
Purkštuko kontaktinė jėga: 82 kN
Elektrohidraulinė įranga:
Siurblio variklio nominali galia: 55 kW
Sumontuota kaitinimo galia: 29 kW
Cilindrų kaitinimo valdymo zonos: 6
Alyvos tūris: 720 ltr.
Matmenys ir svoris:
Apytiksliai išmatavimai: 6,50 x 2,20 x 2,40 m
Bendras svoris: 14 500 kg
Maksimali įrankio masė: 3430 kg
Priedai:
- Svyravimo elementai
- 8 kanalų vandens kolektorius
- Krauss Maffei robotas LR 100
Iiedpfx Aljzfpthjrsc
X: 550 mm, servopavaros
Y: 1200 mm, servopavaros
Z: 2000 mm, servopavaros
C: 0-90°, pneumatinis
Papildoma įranga:
- 1 x hidr. šerdis
- 1 x oro vožtuvas
- Slėgio akumuliatorius
- 6 karštų kanalų reguliavimo vietos
- Roboto sąsaja pagal Euromap 67
Mažas skelbimas
Kirchheim unter Teck
1 225 km
Cilindrinio šlifavimo staklės - Universalios
KELLENBERGERKEL-VARIA UR 250-1000 Kelco120
Skambinti
Būklė: naudotas, Gamybos metai: 2000, Šlifavimo skersmuo 450 mm
Šlifavimo ilgis 1000 mm
Centros aukštis 225 mm
Mašina buvo dalinai atnaujinta, su nauja geometrija, ir naudota vos kelias savaites, po ko dėl bankroto buvo vėl parduota.
Bendros mašinos nuotrauka – beveik identiškos mašinos.
Originalios mašinos vidaus ir ruošinio spindelės nuotraukos.
– kapitalinis aptarnavimas
– nauja stalo geometrija
– dalinis vidinės dalies dažymas
Šlifavimo diskų įranga KAIRĖJE 400x63x127mm (standartinė)
Šlifavimo diskų įranga DEŠINĖJE 300x40x127mm
Vidinio šlifavimo įrenginys Ø120mm HF špindeliams
CNC valdymas KELCO 120
C ašis nereguliariam šlifavimui. Kel-Poly
B AŠIS: CNC valdoma B ašis
KELCO 120: v pastovus 35m/s arba 45m/s
Greitaeigis vidinio šlifavimo špindelis
Valdymo blokas MFV ir MFZ špindeliams
Hidraulinis priešveržimas atraminiam centrui
NĖRA mikroreguliavimo atraminiame centre
Spyruoklinis priešveržiamas įdėklas
Viršstalo aušinimas
Iisdpoxzk Niofx Alrsc
Standartinis ruošinio spindelio blokas MK 5 DIN 55026, 5 dydis
MIKRO-reguliavimas stand. ruošinio spindelio blokui
Pastatymo įrenginys po stalu
Aktyvus išilginis pozicionavimas KELPOS, MARPOSS, montuota ant šlifavimo galvos
Įrankių matavimo sistema KELSET, MARPOSS
Prisilietimo sensorius MARPOSS
Matavimo valdiklis MARPOSS Minialsar paruoštas
Popierinis juostinis filtras
Mažas skelbimas
Białobrzegi
492 km
Wilko maišyklė
CFSCombiGrind 2000/250
Skambinti
Būklė: naudotas, Wilko maišytuvas CFS CombiGrind 2000/250
Talpa: 2000 l
Gerklės skersmuo: 250 mm
Galia: 75 kW
Elektra: 400 V 50 Hz
Matmenys: 3200 mm x 1900 mm x 2800 mm
Iisdpfx Alsy Alwgsroc
Su MultiTrack infraraudonųjų spindulių analizatoriumi, analizuojančiu riebalų, baltymų ir vandens kiekį mėsoje.
Mažas skelbimas
Würzburg
1 113 km
Dematic transportavimo sistema, ritininės linijos 2625-500-440
Dematic3000/2500/2000/1500/1000-500-440
Skambinti
Būklė: naudotas, Dematic Conveyor System Roller Conveyors 2625-500-440
RA1995
Accumulation Roller Conveyor
Nominal/Outer Width (NB): 500 mm
Available Conveyor Lengths (FL): 2625 mm, expandable with additional sections
Further Information
Iiedpfsk Abrnjx Alrec
Manufacturer: Siemens Dematic
Type: Accumulation Roller Conveyor
Accumulation Station Size: 750 mm
Year of Manufacture: unknown
Condition: good (used)
Roller Width (RB): 440 mm
Roller Pitch: 125 mm, adjustable
Drive Types: SEW geared motor
Conveyable Load Weight: up to 30 kg
Accumulation Mechanism: Photoelectric sensor with pneumatic valve and cylinder
The following accessories are optionally available, e.g.:
Frequency inverter
Supports
Side guides
Price: on request plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For individual, professional advice, simply get in touch with us.
Contact us by phone or email.
We will be happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Kind regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and point of contact for intralogistics.
Mažas skelbimas
Würzburg
1 113 km
Konvejerių sistemos ritininiai konvejeriai ritininiai konvejeriai
Dematic3000/2500/2000/1500/1000-600-540
Skambinti
Būklė: naujas, Dematic Conveyor System Roller Conveyors 3000/2500/2000/1500/1000-600-540
RA1938
Gravity conveyor – roller conveyors without drive
Nominal/outside width (NB): 600 mm
Available conveyor lengths (FL): 3000 mm, 2500 mm, 2000 mm, 1500 mm, 1000 mm
Further information
Manufacturer: Dematic
Type: Roller conveyor
Year of manufacture: unknown
Condition: good (used)
Roller width (RB): 540 mm
Roller pitch: 62.5–125 mm, adjustable
Drive types: none or head and center drive
Conveyed goods weight: up to 30 kg
Also optionally available, e.g.:
• Motors with or without frequency inverter by SEW Eurodrive / Movimot
• Supports
• Side guides
Price: Net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg
For individual, professional consultation, simply get in touch with us.
Contact us by phone or email.
We are happy to assist you with the planning and realisation of your projects.
We look forward to hearing from you.
Best regards,
Your Dr. Sonntag GmbH & Co. KG Team
Ijdpfx Alek Ablwsreic
Your specialist and contact for intralogistics
Mažas skelbimas
Wellingborough
1 639 km
SIJŲ SUVIRINIMO LINIJA
CORIMPEXBWM TC 2000-1000 3-15
Skambinti
Būklė: geras (naudotas), CORIMPEX SIJŲ SUVIRINIMO STAKLĖS TIPAS BWM TC 2000-1000 3-15.
SIJOS STEBAS (WEB): Aukštis 200 - 2000 mm (įskaitant flanšus). Storis 5 - 25 mm.
FLANŠAS: Plotis 150 - 1000 mm, storis 8-40 mm.
Maks. deformuotas storis = 35 mm su 1000 mm flanšo pločiu.
MAKS. SIJOS SVORIS: 1000 kg / metras, MIN. SIJOS ILGIS: 3000 mm, MAKS. SIJOS ILGIS: 15 000 mm.
HIDRAULINIS CILINDRAS: 1800 mm.
PRIILGINIMAS TAŠKINIS SUVIRINIMAS: nereikalingas.
VAROMI VOLELIAI ĮĖJIMO/IŠĖJIMO KONVEJERIUOSE: greitis = 12 m/min.
Iedpfx Aszc Rl Uelreic
STŪMOKLIO DARBINĖ JĖGA: 6/9 tonos.
EIGA GREIČIO DIAPAZONAS: 0,2 - 2,1 m/min.
SUVIRINIMO PROCESAS: tandeminis lankinis naudojant panardintą lanką.
Mažas skelbimas
Hannover
979 km
Liejimo mašina
KraussMaffeiKM 250-1000 CX
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2010, veikimo valandos: 65 850 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61013689, spaudimo jėga: 2 500 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 630 mm, darbinio tūrio: 432 cm³, įpurškimo slėgis: 2 304 juosta, injekcijos svoris: 393 g, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained pre-owned injection moulding machine. Naturally, we also purchase well-maintained injection moulding machines, subject to models from 2010 onwards.
We have been a wholesaler of used injection moulding machines for over 25 years.
Current Tax Savings and Advantages for Used Machines:
From 01.07.2025, used machines are also eligible for a 30% annual special depreciation allowance. In addition to the lower purchase price compared to new equipment, you can claim the same depreciation amounts as with new machinery.
Keyword: Growth Booster (§ 7 Section 2 EStG-E)
Currently in stock, tested at our warehouse in Hanover:
Manufacturer: Krauss Maffei
Iiodpfoxqhuuex Alrsc
Model: KM 250 1000 CX
Control Unit: MC5
Year of manufacture: 2010
Operating hours: 65,850 h
Machine No.: 61013689
Processed materials: PE and PP – Thermoplastics
Features:
- 2 x core pull (moving WAP, fixed WAP)
- Pneumatic valve 1 on FWAP
- Accumulator for increased injection capacity
- Fast SK removal CX Midrange
- Ejecting cooled nozzle tip
- Start handling during mould movement
- Start-up circuit
- Cycle time analysis
- External USB keyboard
- Graphic analysis – maintenance alerts
- Electronic coding of injection unit
- Pneumatic valve on BWAP for air blast
- 12 temperature control zones
- Volt-free contact BDE
- Process monitoring
- Cycle data storage
- Trend graphics – target/actual graph
- PV control
- Active back pressure control
- From first ownership – origin Germany
Regular maintenance by manufacturer and previous owner
Clamping Unit
Clamping force: 2500 kN / 250 t
Tie bar distance: 630 x 630 mm
Platen size: 995 x 1050 mm
Opening width: 820 mm
Min. mould height: 330 mm
Max. opening stroke: 1,150 mm
Ejector stroke: 200 mm
Ejector force: 57 kN max / 26.3 kN return
Injection Unit
Screw diameter: 50 mm
Injection volume: 432 cm³
Shot weight: 393 g/PS
Injection pressure: 2,304 bar
Electrics
Pump: 45 kW
Heating: 5 zones, 18.7 kW
Weight: 13,900 kg
Dimensions: 5.7 x 2.3 x 2.3 m
Complete documentation, manual, and software
Available immediately from our warehouse in Hanover, Germany, ex stock or delivered (shipping costs apply).
The machine is offered fully tested and functional.
The machine is our sole property.
The requested machine is available immediately in Hanover, fully tested for functionality, and can be inspected under power.
Information about our company and machines:
- We only sell machines acquired from active production, from our own stock in Hanover.
- All machines are checked and tested before removal.
- We do NOT sell insolvency assets – we are NOT brokers dealing in third-party property.
- Every machine offered comes from successful companies with a proven record of regular service and maintenance.
- All offered machines can be inspected in our warehouse.
Mažas skelbimas
Wrocław
649 km
Liejimo mašina
KraussMaffeiKM 420-2000 CX
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, KRAUSS MAFFEI KM 420-2000 CX Injection Moulding Machine
Basic Data
Manufacturer: Krauss Maffei
Model: KM 420-2000 CX
Machine Number: 61030600
Year of Manufacture: 2018
Control System: MC6
Control Panel: Colour monitor integrated with operator console
The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system.
Plasticising Unit
Complete plasticising unit designed for processing thermoplastics.
High-performance screw: HPS-UN
Screw diameter: 60 mm
Non-return valve: yes
Nozzle type: open
Nozzle radius: 15 mm
Nozzle opening: 6 mm
Injection unit: SP 2000
Clamping Unit
Clamping force: 4200 kN
Mould opening force: 250 kN
Platen dimensions (horizontal × vertical): 1270 × 1230 mm
Tie bar spacing (horizontal × vertical): 800 × 800 mm
Maximum mould opening stroke: 1020 mm
Minimum mould height: 580 mm
Maximum platen opening stroke: 1600 mm
Ejector stroke: 250 mm
Ejector force (forward / backward): 95 / 49 kN
Injection Unit
Screw diameter: 60 mm
L/D ratio: 23.3
Injection pressure: 2420 bar
Injection volume: 792 cm³
Shot weight (PS): 720 g
Injection speed: 130 mm/s
Injection throughput: 368 cm³/s
Screw speed: 285 rpm
Plasticising rate: 72.2 g/s
Nozzle contact force: 82 kN
Electrical & Hydraulic Equipment
Pump motor rated power: 75 kW
Installed heater power: 29 kW
Number of barrel heating zones: 6 (+1 extended nozzle)
Dry cycle time (EUROMAP 6): 3.0 s / 560 mm
Required hydraulic oil volume: 1000 l
Machine Dimensions & Weight
Net weight (incl. control cabinet): 21.5 t
Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m
Maximum mould weight: 6700 kg
Iiedpfjyugkwsx Alrec
Optional ESS (Energy Saving Systems)
The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines.
The system controls the hydraulic pump motor via a frequency inverter, adapting the motor speed to the actual demand during each production cycle.
Key Benefits
- Reduction of electrical energy consumption by up to 30%
- Hydraulic pump servo drive technology
- Worldwide quality and proven industrial technology
- Reduced energy losses during idle running
- Lower hydraulic system temperature rise
- Extended service life of hydraulic components
- Retrofit possible on existing hydraulic injection moulding machines
Mažas skelbimas
Austrija
963 km
Pjovimo vandens srove mašina
KK KletzerCNC 3 Achsen 3000 x 2000 x 250 mm
Skambinti
Būklė: naujas, x-travel: 3000 mm, y-travel: 2000 mm, z-travel: 250 mm
Pump capacity for flushing: 37 l/min
Control system: Siemens PLC Touch Screen; directly usable DXF files
Output pressure: max. 5500 bar
Abrasive delivery system for waterjet cutting machines – fill weight: 350 kg
OMAX negative pressure sensor for monitoring abrasive feed to the nozzle
Sensor for pump pressure monitoring
In waterjet cutting, water is compressed to a pressure of up to 5500 bar. Depending on requirements and the workpiece, it is then forced through a nozzle with a diameter of 0.01 to 0.08 mm. As waterjet technology processes materials without heat input, no distortions occur.
By adding an abrasive medium, waterjet cutting achieves the highest precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both perpendicular and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype manufacturing. It is also environmentally friendly, as the waterjet process is dust- and vapor-free and conserves material.
Waterjet Cutting: Example Gallery
What sounds impressive in theory is even more so in the finished product. We have compiled a selection of images to demonstrate our waterjet cutting capabilities. Browse the example gallery to see what is possible with this modern processing method. Waterjet will find the right solution for your requirement, too!
Advantages
- No deformation in the cut area
- Cutting without thermal influence
- Material-saving
- High precision: +/- 0.1 mm
- Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm
- Flexible manufacturing
- Perpendicular and angled cuts
- Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM
- Environmentally friendly, vapor- and dust-free
We cut everything – all materials shaped to your needs:
- Aluminum
- Steel
- Brass
- Copper & Bronze
- Other precious metals
- Glass
- Granite & Marble
- Tiles
- Composites
- Promat cuttings
- Rubber
- Plastics
- Plexiglass
Optional:
Oil cooler ..... € 10,725.00
Water filtration system ..... € 1,430.00
Sludge extraction system ..... € 10,725.00
Professional water treatment system ..... € 10,725.00
Ijdpfx Aljhqnl Tersic
IMPORTANT: An oil cooler must be present at commissioning!!!
This enables operation for longer than 1 hour.
Further videos:
Mažas skelbimas
Austrija
963 km
Pjovimo vandens srove mašina
KK-IndustriesCNC 3 Achsen 4000 x 2000 x 250 mm
Skambinti
Būklė: naujas, x-travel: 4000 mm
y-travel: 2000 mm
z-travel: 250 mm
Pump capacity for flushing: 37
Control: Siemens PLC touch screen, direct use of DXF files
Output pressure: max. 5500 bar
Abrasive delivery system for waterjet cutting systems - fill weight 350 kg
OMAX vacuum sensor for monitoring of abrasive feed to the nozzle
Sensor for pump pressure monitoring
During waterjet cutting, water is pressurized up to 5500 bar. Depending on requirements and workpiece, it is then forced through a nozzle with a diameter of 0.01 to 0.08 mm. Since waterjet technology processes materials without heat input, there is no deformation.
By adding abrasive, waterjet cutting achieves highest precision with tolerances of +/- 0.01 mm. Our flexible production enables both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers significant advantages for industry, trade, and prototyping. It is also environmentally friendly, as waterjet cutting is dust- and vapor-free and conserves material.
Waterjet Cutting: Example Gallery
What sounds impressive in theory is even more remarkable in finished parts. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Browse through our example gallery and see for yourself what is possible with this modern machining process. Waterjet will find the right solution for your order, too!
Iisdpfsd Ab Uusx Alrec
Advantages:
• No deformation in the cut area
• Cutting without heat input
• Material-saving
• High precision: +/- 0.1 mm
• Cutting area: x = 4010 mm; y = 2010 mm; z = 250 mm
• Flexible production
• Vertical and angled cuts
• Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM
• Environmentally friendly, vapor- and dust-free
We cut everything – all materials shaped:
• Aluminum
• Steel
• Brass
• Copper & Bronze
• Other precious metals
• Glass
• Granite & Marble
• Tiles
• Composites
• Profile cuttings
• Rubber
• Plastics
• Acrylic glass
Optional:
• Oil cooler € 10,725.00
• Water filter system € 1,430.00
• Sludge extraction system € 10,725.00
• Professional water treatment system € 10,725.00
An oil cooler must be present at commissioning!!!
To enable operation for longer than 1 hour.
Mažas skelbimas
Cantabria
2 373 km
įpurškimo liejimo mašina
KraussMaffeiKM 420-2000 CX
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 6 200 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 200 kN, varžto skersmuo: 75 mm, Krauss-Maffei KM 420-2000 CX
Injection molding machine from Krauss-Maffei with 420 tons of clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras: 8 hot runner zones. 2 cores on the fixed platen, 2 cores on the moving platen. 1 pneumatic valve on the moving platen. The injection molding machine is delivered RE-Conditioned by the UK Transitus expert technical team. Commissioning at the customer's site can be offered, ensuring proper operation upon installation completion.
Iedpfxewq D Efo Alrjic
Technical Details
SCREW DIAMETER: 75 mm
INJECTION PRESSURE: 1635 BAR
INJECTION VOLUME: 1237 cm³
INJECTION WEIGHT: 1126 g
MAX. DISTANCE BETWEEN PLATENS: 1400 mm
MINIMUM MOLD HEIGHT: 380 mm
OPENING STROKE: 1020 mm
DISTANCE BETWEEN TIE BARS: 900 x 800 mm
PLATEN DIMENSIONS: 1270 x 1230 mm
SCREW DIAMETER: 75 mm
CLAMPING FORCE: 4200 kN
YEAR OF MANUFACTURE: 2008
OPERATING HOURS: 6282
Mažas skelbimas
Würzburg
1 113 km
Konvejerių sistema Kaupiamieji ritininiai konvejeriai Pavaros blokas
Dematic3000-600-540, 750
Skambinti
Būklė: naudotas, Gamybos metai: 2012, Dematic Conveyor System Accumulating Roller Conveyors 3000-600-540, 750
RA2290
Manufacturer: Dematic
Type: Drive Unit for Accumulating Roller Conveyor
Year of manufacture: 2012
Condition: good (used)
Roller width (RB): 540 mm
Element length: 3000 mm, optionally shorten-able
Accumulation space size: 750 mm
Roller pitch: 62.5–125 mm, adjustable
Drive types: Head and center drive
Conveyed goods weight: up to 30 kg
Technical data: SEW geared motor 380V
RA2290.1
Manufacturer: Dematic
Type: Extension Module for Accumulating Roller Conveyor
Year of manufacture: 2012
Condition: good (used)
Roller width (RB): 540 mm
Element length: 3000 mm, optionally shorten-able
Accumulation space size: 750 mm
Roller pitch: 62.5–125 mm, adjustable
Drive types: Powered via RA2290 (required)
Conveyed goods weight: up to 30 kg
Optionally available, e.g.:
Frequency inverter from SEW Eurodrive / Movimot
Support stands
Side guides
Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg
For individual, expert advice, simply get in touch with us.
Isdpfjtp Tv Tox Alreic
Contact us by phone or email.
We are happy to assist you with the planning and implementation of your projects.
We look forward to hearing from you.
Best regards,
Your team at Dr. Sonntag GmbH & Co. KG
Your specialist and contact for intralogistics
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Arburg630S 2500-1300 ECO
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S
Year of manufacture: 2008
Iedpfx Aezc N Ubelroic
Injection unit:
Screw diameter: 55 mm
Shot weight: 521 g
Injection pressure: 2380 bar
Dosage volume: 570 ccm
Clamping unit:
Clamping force: 250 t
Tie bar distance: 630x630 mm
Platen size: 900x900 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: SELOGICA – touchscreen
Additional equipment:
Euromap 67
Robot interface
Air valve x 4
Hydraulic core pull x 2
Hot runner control x 15
Injection unit hardened - bimetallic
Machine with cylinder / battery with compressed nitrogen (additional charge for high-speed operation)
ECO – the machine is equipped with a system for adjusting the minimum mould height
Robot - Sepro Industrial Robot SDR 22S
Year of manufacture: 2016
4-axis robot: 3 axes driven by servo motors (electric); C-axis – pneumatic
Travel paths (axes): X-1500, Y-2200, Z-800
Vacuum x 2
Gripper x 2
Touch control panel
Robot with adapter, conveyor belt, and protective enclosure
Purchase of robot and conveyor belt available for an additional charge
Dimensions:
Weight: 12,510 kg
Length/width/height: 6.57x1.76x2.46 m
All offered machines are started and tested by our service technicians prior to sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź.
Price: Upon request
Mažas skelbimas
Łódź
478 km
Liejimo mašina
Arburg420C 1300-675
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Arburg 420C 1300-675 with Star sprue picker
Year of manufacture: 2002
Injection unit:
Screw diameter: 50 mm
Shot weight: 297 g
Injection pressure: 2080 bar
Metering volume: 353 ccm
Clamping unit:
Clamping force: 130 t
Tie bar spacing: 420x420 mm
Platen size: 605x605 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control: SELOGICA
Additional equipment:
Iodpfxjzc N H Rj Alreic
Euromap 12
Robot interface
Air valve x 2
Hydraulic core pull x 2
Injection unit hardened - bimetal
Type of injection unit: Vario – This allows, for example, the use of the injection unit for side injection
Covers on the operator side open automatically
Dimensions:
Weight: 4330 kg
Length/Width/Height: 4.80x1.64x2.08 m
Drive:
Pump/motor: 30 kW
Heating capacity: 14.9 kW
Total power: 44.9 kW
All machines offered are started and tested by our service engineers before sale.
It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź.
Price: On request
Mažas skelbimas
Kłobuck
579 km
ARBURG 420C įpurškimo liejimo mašina
ARBURG420C
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Parduodama ARBURG 420C liejimo mašina, pagaminta 1996 m. Mašina visiškai veikianti, gerai prižiūrėta, naudota lengvai gamybai.
Tvirtos hidraulinės konstrukcijos, idealiai tinka vidutinio dydžio formoms.
Parametrai:
- Užspaudimo jėga: apie 100 tonų
- Atstumas tarp kolonų: 420 x 420 mm
- Sraigto diametras: apie 35–40 mm
- Įpurškimo tūris: 140–180 cm³
Iijdpfx Aszdlwaslrsc
Valdymas: Dialogica / Selogica
- Svoris: apie 3,5 t
Mažas skelbimas
Vecsés
922 km
Liejimo mašina
ARBURGAllrounder Selecta 630 S 2500-2100
Skambinti
Būklė: naudotas, Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 500 kN, tarpas tarp stulpų: 630 mm, bendras svoris: 14 500 kg, šildymo galia: 36 kW (48,95 AG), siurblio galia: 75 000 W, galia: 111 kW (150,92 AG), įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Siūlome naudotą ARBURG Allrounder Selecta 630 S 2500-2100 liejimo mašiną, pagaminta 2005 metais.
Iedpszcdw Defx Alreic
Mašinos numeris: 197628
Pagaminimo metai: 2005/05
Svoris: 14500 kg
Uždarymo jėga: 2500 kN
Darbinė įtampa: 400 V
Dažnis: 50 Hz
Šildymo galia: 36,0 kW
Siurblio variklio galia: 75,00 kW
Bendra įdiegtoji galia: 111,0 kW
Siurblio darbo valandos: 38989
Automatinio darbo valandos: 37209
Mašina naudojama retkarčiais, darbo valandos gali keistis.
Wittmann robotas į kainą neįskaičiuotas.
Jei turite klausimų arba reikia daugiau informacijos, parašykite mums žinutę arba susisiekite telefonu.
Mažas skelbimas
Tata
923 km
FCP-C 10 kN pneumatinis presas 1 t
FCC FCP-C 1000 10KN
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Oro kondicionierius, spaudimo jėga: 1 t, stalo plotis: 200 mm, stalo ilgis: 230 mm, bendras plotis: 400 mm, bendras aukštis: 860 mm, bendras svoris: 105 kg, oro slėgis: 6 juosta, FCP-C 10 kN pneumatic press, single unit for sale
Manufacturer: FCP-C
Pressing force: 1 t
Stroke: 75–100 mm
Air pressure: 0.2–0.5 MPa
Working height: 320 mm
Two-hand operation
Isdpjv E Sazefx Alrsic
Table size: 200 x 230 mm
Shaft diameter: φ15H9 mm x depth: 35 mm
Speed controller
Low-friction roller
Indexing lever
Height: 880 mm
Length: 360 mm
Width: 400 mm
Weight: 105 kg
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Tata
923 km
Šildymo ir džiovinimo krosnelė Heraeus UT6200
Heraeus UT6200 250°C
Skambinti
Būklė: geras (naudotas), We are offering a Heraeus heating and drying oven for sale.
Heraeus Heating and Drying Oven
Manufacturer: HERAEUS
Model: 6200
Condition: Used, in good condition
Forced-air drying oven: up to 250°C
Internal volume: 180 liters
Temperature controller and timer
Forced-air circulation
Electrical specifications:
2800 watts, single-phase, 230 volts, 50 Hz, 12.3 A, IP20
External dimensions:
Width: 800 mm
Depth: 890 mm
Height: 810 mm
Internal dimensions:
Width: 510 mm
Depth: 550 mm
Height: 650 mm
Ijdpfxovzqyfo Alreic
Weight: 100 kg
Mažas skelbimas
Vokietija
999 km
Dviejų komponentų liejimo mašina
ARBURG420C1300-350-60
Skambinti
Būklė: naudotas, Gamybos metai: 2003, veikimo valandos: 39 000 h, Funkcionalumas: visiškai funkcionalus, 1 vnt. naudota dviejų komponentų liejimo mašina su robotu
Gamintojas: ARBURG
Tipas: 420C1300-350-60
Pagaminimo metai: 2003
Uždarymo jėga: 130 tonų
Kolonų atstumas: 420 x 420 mm
Sraigto skersmuo 1: 35 mm
Detalių svoris PS: 127 g
Sraigto skersmuo 2: 25 mm
Detalių svoris PS: 45 g
Iodpfx Aljy Snapereic
Valdymas: Selogica
Įranga:
- Šerdies traukimas
- Robotas
Mažas skelbimas
Koszalin
507 km
Įpurškimo liejimo mašina
Arburg420C-1300-350 (186)
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Arburg 420C-1300-350 (186)
with conveyor belt, bimetallic screw
General Information
Item number: 186
Availability: In stock
Year of manufacture: 1998
Brand: Arburg
Technical Data
Shot weight: 210 g
Clamping force: 1,300 kN
Screw diameter: 45 mm
Injection pressure: 1,670 bar
Tie bar distance: 420 x 420 mm
Platen size: 605 x 605 mm
Minimum mould height: 250 mm
Control system: Selogica
Language: German
Power: 32.2 kW
Isdpfovnmc Asx Alreic
Operating hours: 88,000 h
Weight: 4,080 kg
Dimensions: 4.5 x 2 m
Hopper: No
Core pull: Yes
Euromap interface: Yes
Mažas skelbimas
Koszalin
507 km
Įpurškimo liejimo mašina
Arburg420C-1300-675 (167)
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, veikimo valandos: 84 840 h, spaudimo jėga: 1 300 kN, varžto skersmuo: 50 mm, įpurškimo slėgis: 2 080 juosta, injekcijos svoris: 297 g, Arburg 420C-1300-675 (167)
Item number: 167
Availability: In stock
Year of manufacture: 2000
Brand: Arburg
Technical Data
Shot weight: 297 g
Clamping force: 1,300 kN
Screw diameter: 50 mm
Injection pressure: 2080 bar
Tie bar spacing: 420 x 420 mm
Platen size: 615 x 615 mm
Minimum mould height: 350 mm
Control system: Selogica
Language: German
Power: 44.9 kW
Iiodsvt Rvqjpfx Alroc
Operating hours: 84,840 h
Weight: 4,330 kg
Dimensions: 4.9 x 1.8 m
Hopper: No
Core pull: Yes
Air valve: Yes
Robot interface: Yes
Palengviname jums paiešką: "arburg 420 c 1000-250 (2000)"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.






































































































































































