Cronosstech Bk 50 pirkti naudotą (35 087)

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 050 mm, maks. lakšto storis: 12 mm, STANDARD EQUIPMENT Very well suited for bending light and medium gauge sheet, aluminum or stainless steel materials Ideally suited for rolling materials into round and various diameters Bottom and side rolls are hydraulically operated up and down in a direct linear motion Protected against overload Top roll driven by electric motor and planetary gearbox; bottom roll driven by a cardan coupling system; two rolls power-driven Roll positions can be easily read on three digital position indicators Rolled parts can be removed easily thanks to the hydraulically opening head Very easy operation with movable control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and marked with CE User manual OPTIONAL EQUIPMENT Remote assistance with NC control Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Iedpfxew Slxze Abvsib Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Rolls: 250 mm Side Rolls: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 lt Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 350 mm, viršutinio volo skersmuo: 350 mm, šoninio volelio skersmuo: 260 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary reducer (3-roll motor drive) * Easy-to-read position of rolls with three digital displays * Hydraulically opening head and automatically lifting shaft make it easy to remove the bent part * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (hoist) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Ijdpew Smb Rjfx Abveib Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 1 550 mm, darbinis plotis: 1 550 mm, maks. lakšto storis: 15 mm, plieno lakšto storis (maks.): 15 mm, galia: 7,5 kW (10,20 AG), garantijos trukmė: 12 mėnesiai, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Folding head enables easy removal of bent workpieces * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Tapered bearing roll bending system * Hydraulic synchronization system for parallel movement of shafts * Extended shaft ends for fitting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) for large diameter bending support * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls for section bending Iisdpfx Aoxbzr Ujbveb * Stepless hydraulic speed adjustment * Electronic synchronization system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length : 1550 mm Pre-bending : 10/12 mm Bending : 12/15 mm Upper & Lower Roll Diameter : 250 mm Side Roll Diameter : 200 mm Motor Power : 7.5 kW Bending Speed : 5 m/min Length : 3500 mm Width : 1200 mm Height : 1370 mm Weight : 3600 kg

Būklė: naujas, Gamybos metai: 2025, galia: 11 kW (14,96 AG), pjovimo aukštis (maks.): 1 500 mm, pjovimo plotis (maks.): 2 500 mm, garantijos trukmė: 12 mėnesiai, STANDARD FEATURES - Double independent hydraulic vises - Linear rapid descent system - Variable blade speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table feed system - Safety switches - Chip conveyor - Motorized chip brush - 1 pcs band saw blade Iiodjvvcpzopfx Abvsb - 24 months mechanical / 12 months electrical warranty - Country of origin: Turkey TECHNICAL SPECIFICATIONS ROUND CAPACITY (MM): 1500 SQUARE CAPACITY (MM): 1500x1500 RECTANGULAR CAPACITY (MM): 1500x2500 BLADE SIZE (MM): 80x1.6x15650 BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 11 HYDRAULIC MOTOR (KW): 2.2 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 600 MACHINE DIMENSIONS (MM): 7500x2150x3440 WEIGHT (KG): 21000 WE MANUFACTURE ANGLE AND STRAIGHT CUTTING MODELS FROM 220MM TO 3000MM. FOR MORE INFORMATION PLEASE CONTACT US.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 80 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 250/80 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Gib Guides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and metal spinning applications. The 8-gib H-frame design provides maximum rigidity during pressing operations, while parallelism and perpendicularity tolerances are steadily maintained throughout the stroke. The CHSP 250/80 model—with 250-ton main ram and 80-ton blankholder (cushion) capacity—is intended for medium- to high-tonnage deep drawing and spinning operations. The machine frame is stress-relieved via vibration for long-term durability and reliable operation. ⚙️ Standard Equipment - Welded steel construction, 8-gib H-frame press body - Vibratory stress-relieved frame structure - Bronze Zr14 gib slideways - Weld seam applications approved according to WPQR and WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) Iijdpfxsx N Uaqs Abvjb - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Hydraulic unit oil temperature and system status monitoring via screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHSP 250/80 - Type: Welded steel, 8-gib H-frame press body - Frame Material: St52 – ERDEMİR - Gib Slideways: Bronze Zr14 - Capacity (Ram): 250 tons - Capacity (Cushion): 80 tons - Moving Table Size: 1200 × 1500 mm - Fixed Table Size: 1200 × 1500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Stroke (Cushion): 300 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Weld Application: WPQR and WPS certified by TÜRK-AK, approved according to EN ISO 15614-1/2017. Weld operations are overseen by certified “welding coordination engineers” per EN ISO 14731. - Max. Operating Pressure: 250 Bar - Total Motor Power: 37 kW – IE3 - Main Pump: 45 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/s - Drawing Speed of Moving Table: 12 mm/s - Return Speed of Moving Table: 170 mm/s - Cushion Table Advance Speed: 30 mm/s - Main Cylinder Bore: Ø360 mm – Ck45 - Cushion Cylinder Bore: Ø200 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Press Height: 4200 mm - Approx. Press Width: 3250 mm - Approx. Press Depth: 2200 mm - Lower Table Height from Floor: 1350 mm - Main Charge Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Measuring Ruler: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 18 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, galia: 15 kW (20,39 AG), spaudimo jėga: 160 t, stalo plotis: 920 mm, stalo ilgis: 660 mm, gerklės gylis: 320 mm, perforavimo jėga: 160 t, cilindro skersmuo: 55 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, An eccentric press is a type of mechanical press that operates with force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C Frame Eccentric Press 150 Ton is specifically designed for stable performance in cold forming applications. With its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure, it delivers reliable, series-production-ready performance. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal control Applications - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-point slide guidance • Spheroidal cast connecting rod and gear housings • Crankshaft and drive shafts manufactured from 4140 tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • Compliance with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand/finger safeguarding system • PLC control system • Two-hand/foot pedal control system • Mechanical lock system • Emergency reverse motor function • Compliance with occupational health and safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 tons) • Hydraulic lock system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies to required specifications • Eight-point slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Table–ram distance: 500 mm Slide–table opening: 540 mm Distance between uprights: 500 mm Ram adjustment (shut height): 120 mm Approx. machine width: 1600 mm Approx. machine depth: 2280 mm Approx. machine height: 2750 mm Front anchorage dimension: 840 mm Side anchorage dimension: 1300 mm Table bore diameter: Ø220 mm Table size: 660×920 mm Die clamping slot diameter: Ø55 mm Ram size: 600×290 mm Floor to table height: 805 mm Stroke adjustment: 10–125 mm Isdpevtywdsfx Abvjib Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approx. weight: 7100 kg Note: Please inform us for any modification requests on the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Mobile control panel Centrally driven rolls powered by motor Hydraulic up-down movement rear roll and bottom roll Precision bending with braked main motor Conical bending and pre-bending system Bottom and top rolls driven by planetary gearbox Rear Roll Ball System to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Operating manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Iijdpfx Abjw Slcgoveb Wire grooves on shaft ends NC Control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 200 mm, stalo plotis: 1 100 mm, stalo ilgis: 2 000 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric presses are mechanical press types powered by a force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and shaping. H type (straight-side) eccentric presses provide high stability and process safety with their rigid body structures, especially in large table and heavy die applications. CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With a monoblock frame, 8-point guided slide system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with a 2000×1100 mm table size for large dies - Die/equipment protection with hydraulic overload safety device - Precise slide guidance with 8-point guided slide and counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with photoelectric light curtain Applications - Punching/cutting/forming operations requiring a large table - Series production with automatic feeding lines - Heavy die and high-tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted plate • 8-point guided slide • Adjustable stroke on single connecting rod • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized slide adjustment mechanism • Photoelectric safety curtain • Enclosed oil tank with gear set • Dual-solenoid safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material ejection systems • Sliding safety cover at table front • Custom-configured die ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Iijdpfx Abox N Rwrevob Table Dimensions: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 300 mm, viršutinio volo skersmuo: 300 mm, šoninio volelio skersmuo: 280 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * The hydraulically opening head enables quick and easy removal of bent parts * Very simple operation with movable control panel * The positions of the lower rolls are easily readable with two digital indicators * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened hot-rolled steel shafts * Conical rolling system with bearings * Hydraulic balancing system for parallel shaft movement * Extended shaft ends for mounting profile and pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (hoist) for supporting large-diameter bending * Hydraulic side supports for large-diameter bending * Ground and polished rolls for special applications * Profile bending rolls for section bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement Iedpfow Slf Ujx Abvsib TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Top & Bottom Roll Diameter: 300 mm Side Roll Diameter: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 400 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, forming, and heavy-duty shaping applications requiring high tonnage. The 8-guideway H-frame structure ensures maximum rigidity and stability during pressing operations, helping to maintain parallelism and perpendicularity tolerances. The CHP 1500 model offers a reliable solution for automotive, defense, heavy metal forming, and industrial production lines thanks to its large table dimensions, robust hydraulic system, and high stroke capacity. The frame is relieved of residual stress by vibration treatment, aiming for long-lasting, stable operation. ⚙️ Standard Equipment • Steel construction, H-frame press body with 8 guideways • Stress-relieved frame by vibration treatment • Bronze Zr14 slideway bearings • Welded assemblies approved by TURK-AK accredited WPQR and WPS procedures (EN ISO 15614-1:2017 / EN ISO 14731) • Design and manufacturing according to CE standards • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronically-controlled filter contamination warning • On-screen monitoring of hydraulic oil temperature and system status • Cooling system • Off-line filtration • Safety systems for operator protection • SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1500 Type: Steel construction, H-frame body with 8 guideways Frame Material: St52 – ERDEMIR Guideway Bearing: Bronze Zr14 Capacity (Ram): 1500 tons Moving Table Size: 1500 × 2400 mm Fixed Table Size: 1500 × 2400 mm Parallelism Tolerance: 120 microns/m Perpendicularity Tolerance: 60 microns/m Stroke (Ram): 1000 mm Ijdpfx Aox N T R Uebveib Min. Daylight: 200 mm Max. Daylight: 1200 mm Stress Relief: Vibration treatment Welding Procedure: Welding certified in compliance with EN ISO 15614-1/2017, approved by TURK-AK WPQR and WPS Max. Working Pressure: 250 bar Total Motor Power: 90 kW – IE3 Main Pump: 101 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø620 mm – Ck45 (2 units) Auxiliary Rapid Cylinders: 2 units Approximate Press Height: 6250 mm Approximate Press Width: 3750 mm Approximate Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 70 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 1 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 350 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 1000/350 H Type Hydraulic Deep Drawing (Stamping) Press – 8-Guided Slide General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting (ram + cushion) system architecture for heavy-duty metal forming, deep drawing, and stamping applications. Thanks to its 8-guided H-frame structure, high rigidity is maintained throughout the pressing process, and parallelism and perpendicularity tolerances are stably preserved even with large table dimensions. The CHSP 1000/350 model, featuring a 1000-ton main ram and a 350-ton die cushion capacity, is specifically designed for deep drawing operations requiring controlled material flow, especially in the automotive, white goods, defense, and heavy industries. The steel construction frame is stress-relieved by vibration, providing long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-guide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bearings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touch panel display (DELTA 7”) • Adjustable ram and cushion stroke control • Adjustable ram and cushion tonnage (pressure) control • Automatic lubrication system • Electronic filter contamination warning control • Monitoring of hydraulic oil temperature and system status on display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER switching components • Safety systems for operator protection 📐 Technical Specifications – CHSP 1000/350 Type: Steel construction, 8-guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bearings: Bronze Zr14 Capacity (Ram): 1000 Tons Capacity (Cushion): 350 Tons Moving / Fixed Table: 1500 × 2000 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Cushion): 1000 / 350 mm Daylight Opening (Min / Max): 100 / 1100 mm Iodpfxex N Uilo Abveib Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø500 mm – Ck45 (2 units) Cushion Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 65 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2026, pjūklo disko skersmuo: 350 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 90 mm, sukimosi greitis (maks.): 100 aps./min, Kvadratinio plieno pjovimo diapazonas prie 90°: 80 mm, Įranga: dokumentacija / vadovas, kabina, sūkių greitis be galo kintamas, Fully Automatic Magazine-Type Tube and Profile Cutting Saw Machine General Description The fully automatic magazine-type tube and profile cutting saw machine is designed for cutting operations of round pipes, square and rectangular profiles in industrial production lines. It offers high precision, long blade life, and continuous production performance thanks to its PLC-controlled color touchscreen, precision servo drive system, and patented vibration-dampening structure. Iiedsyg H Nqjpfx Abvsb With its magazine design and programmable cutting functions, it enables cutting of different lengths from the same material and minimizes operator dependency. Key Features • Fully automatic magazine-type tube and profile cutting saw machine • PLC-controlled color touchscreen • Servo motor and ballscrew-driven material feed system • Vertical cutting system moving on a linear guide with a servo motor and ballscrew mechanism • Variable cutting speeds:  - Slow at material entry  - Fast during cutting  - Slow at exit • Patented special system eliminating saw tooth backlash:  - Eliminates vibration and resonance  - Prevents saw breakage  - Extends saw blade life • Saw speed adjustable by inverter between 20 – 100 rpm • Up to 1,000 mm single-stroke feeding and cutting • Ability to cut up to 10 different lengths from the same workpiece • High-performance gearbox suitable for continuous operation • ±0.2 mm length accuracy (May vary depending on saw runout) Cutting Capacity (Tube & Profile) • Maximum Saw Diameter: 350 mm • Cutting Angle: 90° • Round Tube:  - Min. Ø15 mm – Max. Ø90 mm • Square Profile:  - Min. 15 × 15 mm – Max. 80 × 80 mm • Rectangular Profile:  - Min. 15 × 15 mm – Max. 80 × 80 mm • Minimum Remaining Scrap Length: 120 mm Technical Specifications • Main Voltage: 400 V • Control Voltage: 24 V • Installed Power: 7.64 kW • Current: 26.6 A • Saw Motor: 4 kW • Coolant Pump: 0.09 kW • Air Pressure: 6 kg/cm² (240 l/min) • Saw Speed: 20 – 100 rpm (inverter controlled) • Cutting Angle: 90° Saw Blade Specifications • Saw Diameter: 350 mm • Bore Diameter: 32 mm • Pin Holes: 2 × Ø11 • Coating Options:  - TiN: For medium hardness steels  - TiCN: For high rigidity steels  - TiAlN: For stainless steels Machine Dimensions & Weight • Width: 8,800 mm • Depth: 2,300 mm • Height: 2,020 mm • Net Weight: 2,750 kg • Gross Weight: 2,790 kg

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, eigos ilgis: 200 mm, stalo plotis: 900 mm, stalo ilgis: 1 800 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Presses are a type of mechanical press, powered by force generated through an eccentric mechanism, commonly used in cold forming operations such as punching, cutting, and stamping. H-Type (straight-side) eccentric presses provide high stability and process safety, particularly in applications involving large beds and heavy dies, thanks to their rigid body construction. The CRONOSSTECH H-Type Eccentric Press 150 Ton is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. Its mono-block frame, 8-slide guided ram system, hydraulic overload safety, and automatic lubrication infrastructure deliver reliable performance suited for continuous production environments. Key Advantages - Stable operation with large beds for big die applications - Die/equipment protection via hydraulic overload safety - Precision guidance with 8-slide guided ram and counterbalance piston - Controlled and user-friendly operation via PLC and touchscreen display - Enhanced operator safety with light curtain guarding Application Areas - Punching/cutting/forming processes requiring large beds - Mass production with automated feed lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel-construction frame • Pneumatic clutch–brake • Additional T-slotted bolster plate • 8-guide ram system • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor function • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain safety guard • Enclosed gear group in oil reservoir • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feed systems • Scrap ejection systems • Sliding safety cover at front of bed • Custom dies upon request ✅ TECHNICAL SPECIFICATIONS (H TYPE – 150 TON) Capacity: 150 Tons Available bed area (lower): 900×1800 mm Available bed area (upper): 900×1800 mm Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (ram): 120 mm Number of connecting rods: 2 Number of eccentric/crank shafts: 2 Safety fuse: Hydraulic Panel circuit components: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operating system: 4-position Die memory: 99 settings Mounting style: Floor-standing Frame type: Mono-block Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine size (L×W×H): 4500×3000×2000 mm Approximate weight: 20 Ton Iijdpfx Aex N Ru Dobveb Note: If you require modifications to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 250 H-Frame, Single-Acting Hydraulic Press – 8-Guided Slideways General Description The CRONOSSTECH CHP series single-acting H-frame hydraulic presses are robust industrial solutions developed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guided H-frame body, loads generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 250 model is engineered to provide long-lasting and dependable performance, particularly for medium to high tonnage production processes. CHP Series – Structural Features CHP series presses are designed for heavy-duty industrial use. The frame and support elements are stress-relieved by vibration processing. Bronze Zr14 slideway bushings guarantee consistent and precise load distribution during ram movement, contributing to long-term high accuracy. ⚙️ Standard Equipment - Welded steel construction, H-frame with 8 guided slides - Frame and structural components stress-relieved by vibration - Bronze Zr14 slideway bushings - WPQR & WPS-certified welds, TÜRK-AK accredited (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacturing compliant with CE standards - PLC-controlled hydraulic system - 7” DELTA touch panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter clogging warning - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Two-hand safety control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER electrical components 📐 Technical Specifications – CHP 250 Type: Welded steel, 8-guided H-frame press Isdpsx N T Eljfx Abvoib Frame Material: St52 – ERDEMİR Slideway Bushing: Bronze Zr14 Capacity (Ram): 250 Tons Movable Table Size: 1000 × 1200 mm Fixed Table Size: 1000 × 1200 mm Parallelism Tolerance: 120 microns/meter Perpendicularity Tolerance: 60 microns/meter Ram Stroke: 600 mm Min. Daylight: 100 mm Max. Daylight: 700 mm Stress Relief: Vibration stress-relieving Welding Application: WPQR & WPS accredited by TÜRK-AK; EN ISO 15614-1/2017 compliant (inspected by certified welding coordination engineers per EN ISO 14731) Max. Operating Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Movable Table Rapid Down Speed: 150 mm/s Movable Table Pressing Speed: 12 mm/s Movable Table Return Speed: 170 mm/s Main Cylinder Bore: Ø360 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Height: 4200 mm Approx. Width: 3250 mm Approx. Depth: 2200 mm Lower Table Height from Floor: 1350 mm Pre-fill Valve: NG 125 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Scale: NOVATECHNIK or TURCK PLC: DELTA Touch Panel: DELTA 7” Electrical Components: SIEMENS – SCHNEIDER Approximate Weight: 9.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, atitraukimo jėga: 175 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 500/175 H-Type Hydraulic Deep Drawing (Cupping) Press – 8-Guided General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are developed with a double-acting operating principle to ensure controlled material flow in sheet metal forming, deep drawing, and cupping operations. Thanks to the 8-guided H-frame body structure, maximum rigidity is maintained during pressing; parallelism and perpendicularity tolerances are consistently preserved throughout the long stroke. The CHSP 500/175 model, featuring a 500-ton main ram and a 175-ton cushion (blank holder) capacity, is designed to provide absolute control over the die and workpiece during high-tonnage deep drawing and cupping operations. The frame construction is stress-relieved by vibration to ensure long-lasting and reliable performance. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration stress-relieved body structure - Bronze Zr14 slideway bearings - WPQR and WPS welding procedures approved and accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion tonnage (pressure) control - Automatic lubrication system Iisdpfxjx N Uhuo Abvjb - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHSP 500/175 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram): 500 Ton Capacity (Cushion): 175 Ton Moving Table Size: 1200 × 1500 mm Fixed Table Size: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Cushion): 350 mm Min. Daylight: 100 mm Max. Daylight: 1100 mm Weld Stress Relieving: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK EN ISO 15614-1/2017 (Welding operations are supervised by "welding coordination engineers" certified according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 45 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Down Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Cushion Table Forward Speed: 30 mm/s Main Cylinder Inner Diameter: Ø500 mm – Ck45 Cushion Cylinder Inner Diameter: Ø300 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approximate Press Height: 5800 mm Approximate Press Width: 3250 mm Approximate Press Depth: 2200 mm Bottom Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 26 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 250 t, stalo plotis: 850 mm, stalo ilgis: 1 150 mm, pramušama skylė stalo paviršiuje: 240 mm, hidraulinio cilindro reguliavimas: 150 mm, eigos reguliavimas: 160 mm, Įranga: apsaugos šviesos užtvara, COUNTRY OF MANUFACTURE: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Vibratory stress relief applied to frame and welded parts - Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI, Italy - Slider guided by 8 bearings - Ram with cushioning cylinder - Parts such as ram, connecting rod, pitman steel cast, GS52 - High-strength one-piece crankshaft – 4140 - Bronze lined connecting rod (Zr14) - Rear-mounted flywheel - Spare bolster plate - Hydraulic overload protection - Motorized bed-ram adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual hand control with timer - Electric counter Iodjvyr D Aepfx Abvjib - PLC operation and touch screen - DELTA - Electrical switchgear SIEMENS-SCHNEIDER - CE conformity (optional) - Finger protection light barriers - SICK, LEUZE - Safety PLC (controls all electrical system, valve, dual hand and pedal) - PILZ - Dual solenoid safety valve – GPA, TOPAIR - With locked position limit switch and panel - Safety wedge - Protective guards within CE scope TYPE: D-TYPE MONOBLOCK FRAME Capacity: 250 Tons Bed-to-Ram Distance: 520 mm Distance Between Side Frames: 1230 mm Ram Adjustment: 150 mm Approx. Press Width: 1600 mm Approx. Press Depth: 2100 mm Approx. Press Height: 3400 mm Bolster Plate Hole Diameter: 240 mm Table Size: 850 / 1150 mm Die Holder Slot Diameter: 60 mm Ram Size: 470 / 900 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 / 160 mm Strokes per Minute: 40 s.p.m. Motor Power: 22 + 2.2 kW Motor Speed: 1450 RPM Approx. Weight: 16,000 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 9 mm, bendras svoris: 5 400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically operated up-down rear and bottom rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 pcs) Operation manual OPTIONAL EQUIPMENT Overhead crane for support in large-diameter rolling Hydraulic side supports for large-diameter rolling Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option Iisdpfxjw Slbvo Abvob TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-Bending: 5/7 mm Bending Capacity: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 9 mm, STANDARD EQUIPMENT - Highly suitable for bending light and medium sheet, aluminum or stainless materials - Ideal for bending round materials and various diameters - Bottom and side rollers move vertically via direct linear hydraulic action - Equipped with overload protection - Top roller driven by electric motor and planetary gearbox; bottom roller driven by a cardan shaft coupling system; both rollers are powered - Three digital position indicators for easy roller position reading - The hydraulically opening head allows for easy removal of the bent piece - Convenient operation with mobile control panel - Welded steel construction frame - SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts - Conical bending mechanism - Hydraulic balancing system ensures parallel movement of shafts - Complies with EU safety standards and CE-marked - User manual included OPTIONAL EQUIPMENT - Remote support via NC control - Top crane (hoist) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rollers - Dual speed adjustment system - Infinitely variable speed adjustment - Hydraulic motor-driven rotation - Part ejection system TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 5/7 mm Bending Capacity: 7/9 mm Top & Bottom Rollers: 250 mm Side Rollers: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Iiodpfx Ajw Slkksbveb Tank Capacity: 40 l Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 6800 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, veikimo valandos: 45 000 h, For sale is a reliable and robust CNC press brake from Amada, model HFP 50-20. The machine is still in operation and can be inspected and tested under power at any time. The photos show the actual condition. The machine appears well-maintained, clean, and complete. Particularly noteworthy is the modern AMNC control unit with color display, which enables comfortable and precise operation. --- Technical specifications: - Pressing force: 50 t (500 kN) - Working length: approx. 2,000 mm - Year of manufacture: 2006 - Stroke: 200 mm - Weight: approx. 4,700 kg - Voltage: 400 V / 50 Hz - Operating hours: approx. 45,000 h Features and condition: - AMNC CNC control (color display, see photos) - Machine runs smoothly and reliably - Safety enclosure available (see photos) - Complete foot pedal and control unit - Test book available - Regularly in operation Overall, a solid, proven industrial machine, ideal for workshop or production use. --- IMPORTANT: - Sale does not include tools Iedpsy Rh Iwsfx Abvoib --- Inspection / Collection: - Test run possible at any time - Loading can be assisted - Location: 94244 Teisnach

Būklė: naujas, Gamybos metai: 2023,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 451 kN, varžto skersmuo: 60 mm, Nėra minimalaus kainos – garantuotas pardavimas aukščiausią pasiūliusiam! Isdpfx Ajy Ewvtobvoib TECHNINĖ INFORMACIJA Uždarymo jėga: 250 t Sraigto skersmuo: 60 mm Stulpelių atstumas: 630 x 560 mm Pastaba: Perkant kelis daiktus iš tos pačios vietos (žr. pasiūlymus žemiau), bus taikomi palankesni išmontavimo ir pakrovimo kaštai.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 8 734 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 5 565 mm, laisvas kėlimas: 1 860 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 2 876 mm, šakių laikiklio plotis: 1 350 mm, šakių ilgis: 1 600 mm, pavaros tipas: Diesel, statybos plotis: 1 350 mm, Diesel forklift truck Load centre: 500 mm ISO class: ISO Class 3 = 2,500 – 4,999 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Speed class: 20 Condition: Refurbished, no warranty Technical condition: good Tyres front type: Superelastic Tyres front size: 355/65-15 NEW Iiodpfx Aboy I Ehvsveb Tyres front condition: 80–100% Tyres rear type: Superelastic Tyres rear size: 250-15 NEW Tyres rear condition: 80–100% Description: Handover with new FEM 4.004 inspection including inspection booklet. Please feel free to call us if you have any further questions. In addition to this model, we have approx. 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We are happy to provide you with quotes for leasing & financing as well as economical delivery options. Trade-in of Linde equipment is also possible – even if you do not purchase a unit from us. Operating hours listed are as of date of entry. Subject to prior sale, changes and errors accepted. Side reach forks, sideshift, fork positioner, Durwen fork positioner with separate sideshift, 3rd valve, 4th valve, rear work lights, front work lights, heater, soot filter, full cab, safety light, seat heating, Suspension comfort seat with seat heating, foldable left door

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 1 h, galia: 125 kW (169,95 AG), keliamoji galia: 250 kg, stiebo tipas: teleskopinis, kėlimo aukštis: 22 700 mm, kėlimo galia: 250 kg/m, platformos ilgis: 1 400 mm, platformos plotis: 700 mm, bendras svoris: 3 390 kg, tuščias svoris: 3 350 kg, transporto ilgis: 7 710 mm, transporto plotis: 2 220 mm, transporto aukštis: 2 990 mm, statybinis aukštis: 2 990 mm, kuro tipas: dyzelinas, kuro sąnaudos per valandą: 8 l/val, kuro bako talpa: 80 l, padangos dydis: Continental pneumatisch (voor & achter 100 %), padang padangų: 100 procentas, ratų bazė: 3 665 mm, spalva: mėlyna, Įranga: ABS, UVV saugos patikra, suodžių filtras, === MAIN TECHNICAL DATA === Year of manufacture: 2025 Mileage: 778 km Working height: 24.7 m Max. lateral outreach: 16.9 m (13.3 m at 250 kg load) Platform capacity: 250 kg Vehicle type: Mercedes-Benz 315 CDI Iijdpfx Absxf Egdjvjb Number of axles: 2 Drive: 4x2 Transmission: Automatic Cab: Single cab Engine power: 125 kW Fuel type: Diesel (Stage VI) Platform dimensions (L × W): 1,400 × 700 mm Platform rotation: Yes (2 × 90°) Boom type: Articulated telescopic boom (4-section, aluminium) Stabilisers: Yes — 3 configurations (profile, full, one-sided) CE certification: Yes (European type approval) Total weight: 3,390 kg === HIGHLIGHTS === Carefully selected from reliable sources with fully traceable history. Fully CE-certified with complete documentation. Working height up to 24.7 m and lateral outreach up to 16.9 m. Full working height achievable with maximum basket load of 250 kg. Automatic positioning system, home function, and outrigger controls at vehicle rear. Optional features: Tree-care package, tool tray, chainsaw holder, traffic cone holder, insulation package. === CONDITION === New machine (year 2025) with only 778 km. Fully inspected, tested, and immediately ready for operation. Available immediately for worldwide shipping. === LOCATION & DELIVERY === Location: Sittard, Netherlands. Worldwide shipping available. Price €192,500 (EXW / excl. VAT). The Palfinger P 250 BK is a modern truck-mounted aerial platform with a working height of 24.7 m and a lateral outreach of up to 16.9 m. Mounted on a Mercedes-Benz 315 CDI (Euro Stage VI) chassis, it combines performance, precision, and low emissions. The aluminium work basket (1.40 × 0.70 × 1.10 m) features a 230V socket and dual 90° rotation. Thanks to automatic stabilisation, home function, and optional accessories, this platform is ideal for maintenance, installation, and tree care applications. Fully CE-certified and immediately available from stock in Sittard. === DELIVERY === Crane loading available on request. Flexible worldwide shipping options tailored to your destination and logistical preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 1 h, galia: 125 kW (169,95 AG), keliamoji galia: 250 kg, stiebo tipas: teleskopinis, kėlimo aukštis: 22 700 mm, kėlimo galia: 250 kg/m, platformos ilgis: 1 400 mm, platformos plotis: 700 mm, bendras svoris: 3 500 kg, tuščias svoris: 3 390 kg, transporto ilgis: 7 710 mm, transporto plotis: 2 220 mm, transporto aukštis: 2 990 mm, statybinis aukštis: 2 990 mm, kuro tipas: dyzelinas, kuro sąnaudos per valandą: 8 l/val, kuro bako talpa: 80 l, padangos dydis: Continental (voor & achter 100%), padang padangų: 100 procentas, ratų bazė: 3 665 mm, spalva: balta, Įranga: ABS, UVV saugos patikra, suodžių filtras, === MAIN TECHNICAL DATA === Year of manufacture: 2025 Operating hours: 1 h Working height: 24.70 m Max. lateral outreach: 16.90 m Platform capacity: 250 kg Vehicle type: Mercedes-Benz 315 CDI Axles: 2 Drive: 4x2 Transmission: Automatic Cab: Single cab Engine power: 125 kW Fuel type: Diesel (Stage V) Platform dimensions (L × W): 1,400 × 700 mm Platform rotation: Yes (2 × 90°) Boom type: Articulated telescopic boom (4-part, aluminium) Outriggers: Yes – 3 configurations (within contour / full / one-sided) CE certification: Yes Gross weight: 3,500 kg Iiodpoxb S Sxofx Abveb === HIGHLIGHTS === Carefully selected from verifiable sources. Fully CE-certified with original documentation. Working height up to 24.7 m, outreach up to 16.9 m. Full height achievable with 250 kg basket load. Automatic positioning system and “home” function. === CONDITION === Brand new machine (year 2025) with only 650 km. Fully inspected, tested, and immediately operational. Available for immediate delivery from stock. === LOCATION & DELIVERY === Location: Sittard, Netherlands. Worldwide delivery possible. Price €192,500 (EXW / plus VAT). The Palfinger P 250 BK is a modern truck-mounted aerial work platform with an articulated telescopic arm, 24.7 m working height, and up to 16.9 m lateral outreach. Equipped with aluminium basket (1.40 × 0.70 m), dual 90° rotation, and 230V socket in the basket. Mounted on a Mercedes-Benz 315 CDI chassis with Stage V diesel engine – powerful, reliable, and low-emission. Ideal for maintenance, installation, and rental applications. Fully CE-certified and immediately available from stock in Sittard. === DELIVERY === Crane loading available on request. Flexible worldwide shipping options. All transports are professionally handled by the Collé Rental & Sales logistics team.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Servovariklis, elektros variklis, nuolatinės srovės variklis, servopavaros variklis su reduktoriumi, sinchroninis variklis -Gamintojas: SEW-Eurodrive, servopavaros variklis su stabdžiu -Tipas: WF37 CMP50M/BK/DI/PK/AZ2Z/SD1 Iodsxt D Hxjpfx Abvoib -Variklis: greitis: 4500 / maks.: 9000 aps./min. -Reduktorius: i= 18,94 -Velenas: Ø 20 x 40 mm -Apsaugos klasė: IP65 -Stabdys: 2,4 Nm -tipinė lentelė nuotraukoje -Kiekis: 7 pavaros varikliai sandėlyje -Kaina: už vienetą -Matmenys: 455/180H170 mm -Svoris: 10,5 kg/vnt.