Lakštinio metalo apdirbimas pirkti naudotą (5 442)

Būklė: naudotas, Technical details: Sheet width: 1080 mm Sheet thickness: 1.25 mm Frame gap: 1200 mm Dimensions (LxWxH): 1.9 x 0.6 x 0.9 m Additional features: 2x bending rolls: -Ø 63 x 1080 mm -the upper roll is swing-out Rodeu Icdyspfx Ai Tju -the lower roll has an adjustment range of 12 mm -manual drive via hand crank 1x support roll: -Ø 63 x 1080 mm -idling -adjustment range approx. 5 mm

Būklė: naudotas, Gamybos metai: 1995, Techniniai duomenys: Redpfx Aisu Ictns Tou Išsikišimas: 1000 mm Oro slėgis: 6,0 bar Bendras galios poreikis: 5,0 kW Apytikslis įrenginio svoris: 0,4 t Valdymo spintos matmenys (IlxPlxA): 1,03 x 0,4 x 2,05 m Įrenginio matmenys apytiksliai (IlxPlxA): 2,6 x 1,0 x 2,3 m GRĘŽIMO IR KNIEDIJIMO AUTOMATAS Paskirtis: automatinis lakštinio metalo detalių gręžimas ir kniedijimas Charakteristikos: - Kniedės skersmuo Ø 3,2 - 4,0 mm, ilgis 6,0 - 10,0 mm; kniedijimo jėga = 40 000 N - Gręžimas: sūkių dažnis iki 5 000 aps./min, gręžimo pastūma 50 - 1 500 mm/min, eiga 80 mm - Prispaudimas: prispaudimo jėga 50 - 400 daN, apatinis įrankis reguliuojamas 75 mm - Hidraulika: slėgis 128 bar, našumas 14 l/min, galia 4 kW - Pneumatika: slėgis 6 bar, tiekimas 9,5 l/sec - Valdymas per valdymo pultą ir/ar kojinį jungiklį Įranga: - Šoninis stalas - 8 vibraciniai padavimo indai - Hidraulinė stotis Priedai: - Įrankių spinta, įvairūs grąžtai, 2 užspaudimo galvos, prispaudėjai ir kiti įvairūs įrankiai, matomi nuotraukoje.

Būklė: naudotas, Gamybos metai: 1991, Technical Details: Operating pressure: 160 bar Column gap: 2000 mm Throat depth: 1000 mm Operating pressure (pneumatic): min/max 6/8 bar Operating pressure (hydraulic): min/max 160/210 bar Operating voltage: 380/50 V / Hz Table surface: 1900x1000 mm Table height above floor: 1000 mm Clamping area for tooling: 1600x350 mm Oil capacity: 400 l Total power requirement: 25.0 kW Machine weight approx.: 7.1 t Electrical cabinet dimensions (LxWxH): 1.0x0.3x1.4 m Machine dimensions approx. (LxWxH): approx. L:2.2xW:3.4xH:2.2 m HYDRAULIC FLAP PUNCHING DEVICE or CUTTING PRESS or FLAP PRESS The machine is equipped with the tooling "Table punching device for raw part carriers". Two machines available for sale! Redpfeu Icxdex Ai Tsu The machine was used for punching holes in automotive dashboards (top and bottom die). The product holder and the sliding units for trimming and hole punching are mounted on the table. Features: - Light curtain - Hydraulic power unit - Control cabinet - Operator panel - Piece counter - Manual and automatic mode possible - Emergency stop Sale as-is! I.D.. *

Būklė: naudotas, Gamybos metai: 1994, Technical Details: Compressed Air Requirement: 8 bar Total Power Consumption: 14 kW Approx. Machine Weight: 80–170 kg per machine MULTIFUNCTIONAL PUNCHING AND DRILLING AUTOMATON, ideally suited for ALU window construction. 3 units: - for Schüco aluminum window frame, mullion and transom profiles S65 - for Schüco aluminum window sash profiles, system ROYAL S 55, S 65, and S 70 Rjdpsu Icyhsfx Ai Tsu - for Schüco aluminum door profiles, Royal S65 door base profiles - Foot pedal operation - Compressed air gun A N D DRILLING AUTOMATON Application: - Drilling automaton for door hinges - Drill holders: for 8 units; intended for 6 countersink drills with Ø = 11/15 mm, approx. 80 mm long - Tool clamping is foot-operated, drilling is manual - Accessories: various attachments.

Būklė: naudotas, Gamybos metai: 1992, Techninės detalės: Vamzdžio skersmuo: 6 mm Maksimalus vamzdžio skersmuo: 16 mm Maksimalus lenkimo kampas: 90° Elektrinis variantas – įtampa/dažnis: 220 / 50 V/Hz Bendra galia: 0,75 kW Mašinos svoris apie: 0,145 t Mašinos matmenys I x P x A: apie 1,0 x 0,8 x 1,2 m Panaudojimo sritis: Mini vamzdžių lenkimo staklės su atviru lenkimo galvute. Precizinio plieno vamzdžių apdirbimas pagal DIN 2391/C, medžiaga 35.4 NBK, Ø 6 – 16 mm. -su hidrauline pavara -8-ių kampų lenkimo pasirinkimas iki 180° -vamzdžio atramos ilgis 1 m -avarinio stabdžio mygtukas -pervežama su fiksavimo stabdžiu -gręžimo galvutė pasukama (vertikalioje ar horizontalioje padėtyje) -reikalingas hidraulinis alyva = apie 20 litrų (pvz., Esso Nuto 32) Priedai: Rsdpfswivn Njx Ai Teu įvairūs lenkimo įrankiai

Būklė: naudotas, Technical Details: Material width: 200 mm Material thickness: 1.5 mm Number of straightening rollers: 5x top/upper Number of rollers: 6x bottom/lower Feed speed: unknown m/min Power supply: 220/50 A/Hz Total power requirement: 1.5 kW Machine weight approx.: 0.447 t Space required approx.: L:0.88xW:0.76xH:1.26 m Description: Machine is equipped with 11 rollers Rodpfsu Ic D Tex Ai Tou Upper roller: width: 210 mm; Ø ≈ 60 mm; driven; adjustable Lower roller: width: 210 mm; Ø ≈ 60 mm; driven; not adjustable,

Būklė: naudotas, Gamybos metai: 1989, Techninės detalės: Lakšto plotis: 1600 mm Lakšto storis: 20 mm Mažiausias lakšto storis: 6 mm Tiesinimo volų skaičius: 11 Tiesinimo volų skersmuo: 180 mm Rjdpfxjyvfy Ts Ai Tsu Tiesinimo greitis: 10 m/min Jungties galia: 76 kW Bendras galios poreikis: 75 kW Mašinos svoris apie: 39,2 t Šalto lakšto tiesinimo mašina UBR 20x1600

Būklė: naudotas, Gamybos metai: 2012, Technical Details: y-axis travel: 1500 mm Column clearance: 2300 mm (gantry) Beam operating hours: approx. 22,000 h Laser power: 6000 W Control unit: CNC P 8109-10-600D Table length: 4500 mm / Support surface: mm Table width: 2300 mm Operating pressure: 120 hPa Required water pressure: max. 6.0 bar Rjdeu Nu R Ispfx Ai Tsu Voltage: 400 V / 50 Hz Laser unit dimensions (LxWxH): approx. L: 3.0 x W: 1.5 m Dust extraction system dimensions (LxWxH): approx. 1.4 x 2.0 x 2.2 m Cooling system dimensions (LxWxH): approx. 2.55 x 1.0 x 1.9 m Required floor space (total): approx. 12.8 x 5.3 x 4.3 m Flatbed Laser Cutting Machine Application: Industrial cutting and engraving Laser medium: CO²; N²; compressed air Sheet size / format: 3000 x 1500 mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 – 25 mm / stainless steel 25 mm / aluminium: 1 – 15 mm (tab. available) Resonator – Laser source: ByLaser 6000W, wavelength 10,600 mm, beam Ø 20 mm, circular polarization Shuttle table (LxWxH): 4500 x 2300 x 1000 mm, load capacity 900 kg, support surface = 3200 x 2000 mm Cooling unit: Rf Cooling, type WKL 560, refrigerant R 407C, cooling capacity 65 kW, high pressure 27 bar, pump 220 l/min., fan Dedusting system: Donaldson type DFPR06-SPRK (approx. size 1.4 x 2.0 x 2.2 m), year 2014; 5.5 kW with control timer Cross conveyor: Kabelschlepp type SRF 040 (size LxWxH approx. 3630 x 705 x 1000 mm) Light barrier: Sick type M 4000 Cutting gantry: y-axis travel 3000 mm, column clearance 2300 mm, cutting carriage size (LxWxH): 400 x 300 x 650 mm Operator terminal with complete cabinet combination and handheld control unit Cut Control

Būklė: naudotas, Techninės detalės: Didžiausias lenkimo kampas: 180 ° Darbinis aukštis: 350–550 mm Darbinė įtampa: 380 V Apsisukimai per minutę: 10–20 aps./min Maks. strypų skaičius: 1-4 mm Bendras energijos poreikis: 1,3/2,1 kW Apytikslis mašinos svoris: 690 kg Mašinos matmenys (IxPxA): 1,2 x 0,87 x 1,2 m dvi stalo sukimosi greičiai darbo režimo jungiklis automatiniam, impulsiniam ir nuolatiniam veikimui keturios bepakopės reguliuojamos priešpriešinės juostos Be priedų! Rodpexu Dxqofx Ai Tsu

Gamybos metai: 1994, būklė: naudotas, Techniniai duomenys: Lakšto storis: 1,0 mm Vamzdžio skersmuo: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm Sienelės storis: 0,6 / 0,7 / 1,0 mm Vamzdžio traukimo ilgis: 150 - 1000 mm Programos valdymas: SPS Simatic S 5 Reikalingas oro slėgis: 5 bar Darbinė įtampa: 380 V Valdymo įtampa: 24 V Bendras energijos poreikis: 3,5 kW Matmenys (Ilg. x Pl. x Aukšt.): 1,2 x 1,0 x 1,6 m Vamzdžio įtraukimo staklės, šiuo metu pritaikytos Ø 130 mm vamzdžiams. Pritaikymas: pvz., krosnies vamzdžiams, vamzdžiai įvyniojami iki reikiamo dydžio. - Ruošinių įdėjimas ir išėmimas vyksta rankiniu būdu - Valdymas per valdymo pultą - Automatinis ir derinimo režimai Rsdpfxeu Icv As Ai Tju Kitos savybės: Lakšto storis: 0,6 / 0,7 / 1,0 mm Ruošinio ilgis: 150 - 1000 mm Įvairūs priedai / įrankiai Ø 120 ir Ø 130 bei kiti, kaip parodyta nuotraukoje.

Būklė: naudotas, Technical details: Pipe diameter: see o mm Wall thickness: see o mm Voltage: 230 V / 1 phase Rodpfou Icu Sox Ai Tju Total power requirement: 0.55 kW Machine weight approx.: 56 kg Dimensions (L x W x H): 0.45 x 0.37 x 0.35 m HYDRAULIC PIPE PRE-ASSEMBLY UNIT for EO pipes Application for flaring fittings on hydraulic pipes. Crimping of standard raw materials such as steel (ST 35.4 NBK, ST 37.4 NBK, or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar), and copper. Pressure-controlled. The machine includes a flaring tool for size Ø 14 mm. Operating pressure is variably adjustable.

Būklė: naudotas, Gamybos metai: 1993, Technical details: Redpfeu Ickyjx Ai Tou Reach: 220 mm Stroke rate: 24 strokes/min Stroke height: 100 mm Punching force: 800 (80 t) kN Round steel: max. Ø 30 mm (shearing) Square steel: 28 mm (shearing) Angle steel: 90°/45°: 110 x 10 / 65 x 8 mm (shearing) Flat steel: 180 x 18 / 350 x 16 mm (shearing) Blade length: 360 mm Hole diameter: Ø 30 x 20 mm (punching) Sheet thickness: max. 13 mm (notching) Total power requirement: 5.5 kW Approx. machine weight: 1.3 t Approx. machine dimensions (LxWxH): 1.3 x 0.7 x 1.85 m Hydraulic flat, profile and bar steel shear with punching and notching stations Application: Shearing – Notching – Punching Shearing: with back gauge L: 280 x W: 60 x H: 12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x thickness: 10 mm Working height: 1120 mm with stripper Notching: Table size W: 450 mm x D: 310 mm x thickness: 13.5 mm Working height: 1115 mm Hydraulic pressure: 260 bar, 50 liters Hand/foot control

Būklė: naudotas, Gamybos metai: 1991, Techniniai duomenys: Spaudimas: 2000 t Lenkimo ilgis: 4100 mm Rsdpfx Aioy Alw Hj Tsu Valdymas: - Atstumas tarp stulpų: 3200 mm Didž. eiga: 250 mm Bendras galios poreikis: 22 kW Darbinis slėgis: maks. 280 bar Stalo plotis: 200 mm Eigos greitis - aukštyn be apkrovos: 100 mm/s Eigos greitis - žemyn be apkrovos: 100 mm/s Mašinos svoris apie: 18 000 t Mašinos matmenys: 5,0 x 2,7 x 3,0 m

Būklė: naudotas, Gamybos metai: 2003, Technical details: Throat depth: 625 mm Stroke rate: 34 strokes/min Punching force: 95 t Stroke: 80 mm Flat steel: 480 x 15 / 380 x 20 mm Channel sections (U-profiles): 160 x 90 mm Blade length: 483 mm Total power requirement: 7.5 kW Approx. machine weight: 2.7 t Machine dimensions (LxWxH): approx. 1.4 x 0.8 x 1.8 m Hydraulic profile steel shear Shear station: - Maximum shearing: 380 x 20 mm / 480 x 15 mm Rodpfxeu Icl Rs Ai Tsu - Maximum angle cutting: 120 x 15 mm - Adjustable hold-down device, length up to 750 mm - Blade edges: upper blade with 2 cutting edges, lower blade with 4 cutting edges Profile station: Processing of round and square tubes, channel sections (U-sections), I-beams (double-T), and unequal-leg angles - Angle steel: max. 150 x 15 mm at 90°, max. 80 x 10 mm at 45° - Profile cutting: max. round bar Ø 50 mm; U-section 160 x 90 mm; T-section 120 x 12 mm Punching: - Table 600 x 600 mm - Throat depth 625 mm - Max. punching diameter: Ø 57 x 12 mm - Working stroke: 80 mm; Stroke rate: 34 strokes/min; Punching pressure: 40 t - Mitre fence 200 x 100 mm, length = 600 mm Notching station: - Table size: 450 x 450 mm - Notching capacity: material thickness up to 13 mm; width 52 mm; depth (V, 90°) 70 - 100 mm; angle flange 100 x 13 mm Operation via foot pedal A range of accessories available on request. Please enquire.

Būklė: naudotas, Gamybos metai: 2007, Technical Details: Reach: 640 mm Round steel punching: Ø 26 x 20 mm Punching force: 70 t Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.0 x 1.0 x 1.8 m Hydraulic profile steel shear Shear station: - Max. shearing: 300 x 20 mm / 375 x 15 mm - Mitre cutting max.: 150 x 13 mm - Adjustable hold-down, length up to 630 mm Profile station: Processing of round and square profiles, U-profiles, I-beams, and unequal angle bars Angle/profile cutting - Angle steel: Max. 90° cut = 150 x 15 mm, and 45° cut = 80 x 10 mm - U/I-profile = 130 x 65 mm; T-profile = 90 x 12 mm - Maximum section cutting: Round steel Ø 45 mm and square steel 45 mm Rodou Icmhopfx Ai Tsu - Blades with four cutting edges Punching station: - Punching force: 60 t - Throat depth: 640 mm - Table WxD: 1,000 x 600 mm - Maximum punching Ø x thickness: Ø 26 x 20 mm and Ø 57 x 9 mm - Notching (D x W x D): 10 x 45 x 90 mm - Through-hole diameter: Ø 40 mm - Equipment: Stop bar, aluminum angle 100 x 80 x 1,000 mm Notching station: - Table WxD: 430 x 380 mm - Notching: Material thickness 10 mm; width 45 mm; depth 60–90 mm; angle flange 100 x 10 mm Punching: - Table: 600 x 600 mm - Throat depth: 625 mm - Max. bore: Ø 57 x 12 mm - Stroke: 80 mm; strokes/min: 34; punching pressure: 40 t - Stop angle: 200 x 100 mm, L = 600 mm Operation via foot switch For accessories, please inquire.

Būklė: naudotas, Gamybos metai: 1993, Technical details: Sheet width: 3,150 mm Sheet thickness: 13 mm Frame gap: 3,670 mm Blade length: 3,150 mm Hold-downs: 18 units Backgauge: motorized, 1,000 mm Height above floor: 850 mm Operating hours: 3,256 Redpfx Aiou Icnfs Teu Table size (LxW): 3,770 x 500 mm Total power requirement: 30 kW Machine weight approx.: 12.9 t Machine dimensions: 4.4 x 2.8 x 2.4 m Short-stroke mode Continuous operation Cutting gap illumination Hydraulic sheet lifting device Rear light curtain Positionable backgauge

Būklė: naudotas, Technical details: Shearing capacity: 1 mm Max. blank diameter: 1000 mm Shearing capacity: 1 mm Max. blank diameter: 1000 mm Machine weight approx.: 0.2 t Machine dimensions approx. LxWxH: 2.0 x 0.5 x 1.4 m Application: Manual cutting of round sheet steel parts Redpfxeu Icqys Ai Tsu Upper blade: Ø 69 mm x 11 mm; vertical adjustment 25 mm with hand lever Lower blade: Ø 74 x 15 mm; adjustment: NONE = fixed Centering holder with die Material is manually moved: vertical stroke 15 mm with hand lever, horizontal feed 500 mm manually.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Throat depth: 510 mm Operating pressure: 250 bar Punching force: 1000 kN t Rsdsu Ick Tepfx Ai Teu Round steel: up to Ø 65 x 12 and up to Ø 90 x 8.5 mm Electrical connection: 400V / 50Hz Total power requirement: 7.5 kW Machine weight approx.: 2.6 t total Machine dimensions approx. (LxWxH): 1.9 x 1.0 x 2.1 m Tool cabinet dimensions (L x W x H): 0.7 x 0.35 x 0.9 m Heavy-duty, robust electro-hydraulic punching machine with large throat depth -Punching unit: Punch holder with quick-change device for punches up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punch table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment mechanism and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Stroke rate: -at 10 mm stroke = up to 45 strokes/min. -at 30 mm stroke = up to 22 strokes/min. -at 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and position adjustable Supplied with Ø 16 mm punch Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: various punching tools, punches, and dies as per inventory.

Būklė: naudotas, Gamybos metai: 2006, Technical Details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): 1.9 x 2.6 x 1.0 m Transport dimensions: 2.6 x 1.8 x 1.0 m Rjdeu Ibu Rspfx Ai Teu Single and double bending of reinforcing steel possible. Number of bending formers: 2 units Bending angles: 40°; 60°; 75° Bar diameter: Single bend = Ø 12–50 mm, Double bend = Ø 12–35 mm Operation via control panel with touch screen Bending table: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Bending pin hole: Ø 48 mm (16 positions) - Center pin: Ø 50 x 94 mm Counter-holder bars: - 2 units, length = 840 mm - Manual travel adjustment: 100 mm - 13 holes, size Ø 48 mm Accessories: Bending attachments: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for table 8x counter-holders, various shapes 1x bending tray

Būklė: naudotas, Gamybos metai: 1993, Technical details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control for programming: Gelma MM-1 Redpsu Ibyyefx Ai Teu Tube loading length: 1,800 mm Machine weight approx.: 0.232 t Machine dimensions approx. LxWxH: 1.9 x 0.7 x 1.3 m Semi-automatic tube bending machine Modes of operation: manual as well as semi-automatic Application: For multiple, repeatable tube bending processes (e.g., hydraulic piping) The swiveling unit features preselection for three different bending angles in both single and automatic modes. Currently installed on the machine is a stop rod for tube size Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm *

Būklė: naudotas, Gamybos metai: 1992, Technical Details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame clearance: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Max. bending angle: 93° (L-/Z-bending) and 180° for folding Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Rsdpfxeu Ib Ane Ai Teu Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Bending capacity: 2.5 mm at approx. 400 N/mm² tensile strength Hydraulics: OILTECH with approx. 200 liters

Būklė: naudotas, Gamybos metai: 1984, Technical Details: Pressing force: 50 t Bending length: 2550 mm Frame gap: 2045 mm Throat depth: 250 mm Stroke: max. 170 mm Back gauge – adjustable: approx. 800 mm Control unit: DELEM DA 24 e Stroke speed – upward (idle): 80 strokes/min Stroke speed – downward (idle): 160 strokes/min Total power requirement: approx. 7.5 kW Machine weight: approx. 6.2 t Machine dimensions (LxWxH): 3.3 x 1.8 x 2.7 m Rsdpeu Ib D Eofx Ai Tou The machine has a control fault and is being sold as-is at the quoted price. Please inquire for further details. - Motorized back gauge adjustment - Crowning - Maximum distance between table and ram bottom edge: 600 mm - Minimum distance between table and ram bottom edge: 430 mm

Būklė: naudotas, Gamybos metai: 1997, Technical details: Tube diameter: 4.75 - 8.0 mm Wall thickness: - mm Minimum bending radius: various mm Maximum bending angle: 180° Compressed air: min. 4.5 bar Total power requirement: approx. 10 kW Machine weight approx.: 6.0 t Machine dimensions approx. (LxWxH): 6.3x3.7x2.0 m Control cabinet dimensions: 1.8x0.5x2.7 m Operator console dimensions (LxWxH): 0.85x0.68x1.65 m Fully automatic, numerically controlled system For bending hydraulic lines and automotive brake lines of various lengths. - Variable number of bends possible (max. 100 bends per tube) - 2 different, independent bending modules. Each module features 2 NC axes with functions: "Longitudinal movement" (axis 1 + axis 3) traversing speed max. 2.0 m/sec. and "Bending head rotation" and "Bending" (axis 2 + axis 4) max. bending angle 180° - Program memory for 250 lines - The loading unit consists of a manually refillable drum magazine (capacity in drum magazine tube Ø=4.75mm to Ø=8.0mm for 500/1000 pieces) - Loading via swing-arm inserter Rodpfx Aisu Ibuke Tju - Operator terminal Bundy GHF 60134 Accessories: - Various individual and add-on components - incl.

Būklė: naudotas, Technical details: Sheet thickness: 1 mm Frame opening: 2,255 mm Maximum bending angle: 130° Total power requirement: 2.25 kW Approx. machine weight: 1,400 kg Machine dimensions (LxWxH): approx. 2.7 x 1.15 x 1.3 m Machine without foot switch; however, it is pre-wired for one. Rodpfx Aiewq I U Rs Teu The previous owner converted the upper beam adjustment to 60 mm; greater adjustment is only possible by reverting the modification. The foot control for automatic operation is missing. Manual operation is functional. No back gauge.

Būklė: naudotas, Techniniai duomenys: Iškyša: 510 mm Smūgių skaičius: 34 smūgiai/min Pakėlimo aukštis: 100 mm Lakšto storis - maks.: 16 mm Apvalus plienas: Ø 60 (kirpimas) mm Kvadratinis plienas: 60 (kirpimas) mm Kampinis plienas: 90°: 200x200x18 ir 45°: 100x100x13 (kirpimas) mm Plokščias plienas: 750x20 ir 400x30 (kirpimas) mm Peilio ilgis: 765 mm Bendras galios poreikis: 15 kW Mašinos svoris apie: 5,1 t Rodoxcay Hspfx Ai Tsu Mašinos matmenys apie (IxPxA): 2,4 x 1,2 x 2,0 m Hidraulinės plokščių, profilių ir strypų žirklės su skylamušiu, išpjovimo funkcija Panaudojimas: kirpimas - išpjovimas - skylučių štampavimas Štampavimas: -laikiklis -iškyša 510 mm -štampavimo jėga 150 t -angų dydis maks. Ø 40x28 mm -Ø maks. 165 mm -maks. štampo laikiklis Ø 31 mm, šiuo metu sumontuotas štampas Ø 25 mm Išpjovimas: -maks. lakšto storis 16 mm -maks. kampinis plienas 120 mm -pjovimo gylis x plotis: 110 x 58 mm -vamzdžių išpjovimo įrenginys Ø 60 mm Priedai: įvairūs matrica ir įvairūs stūmokliai bei mažieji stūmokliai (žr. nuotrauką)