Giljotinavimo presas

Viersäulenpresse

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2016, spaudimo jėga: 400 t, Clear passage width: 2,500 mm Stroke: 900 mm Total power requirement: 62 kW Machine weight approx.: 27.5 t Dimensions (L x W x H) approx.: 3,950 x 2,200 x 4,850 mm Return force: 40 t Main cylinders: 2 units Column diameter: 220 mm Installation height: 1,300 mm Table size: 2,500 x 1,600 mm Ram size: 3,100 x 1,600 mm Table height above floor approx.: 900 mm Forward speed: 200 mm/sec Return speed: 200 mm/sec Working speed: 5 – 15 mm/sec Oil tank: 1,500 l Oil capacity: 1,200 l Adjustable pressure setting: 50 – 400 t Drawing cushion: 1,400 x 800 mm Drawing unit capacity: 30 – 60 t Drawing cushion stroke: 250 mm Drawing cushion speed: 5 – 80 mm/sec Robust machine body with solid welded construction Low maintenance and reliable Piston rod with induction hardening and chrome plating T-slots as per customer requirement, unless otherwise specified 22 mm according to DIN CE Certificate Manufactured according to EU standards Operating manual, technical documentation, and paperwork in German Machine steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel path control adjustable via monitor Light sensors front and rear: Sick 1,300 mm Hydraulic components by Bosch Rexroth 12-inch Siemens monitor Electrical control cabinet for wall mounting Press interior illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: reduces pump idle consumption to approx. 2 kW Hnodpfxein Et Ne Ab Sei Remote monitoring for remote maintenance Two-hand operation on movable pedestal Additional information: Pressure build-up up to 400 t within max. 4 seconds after tool closure Left side of press sealed by door 1,000 x 800 mm with crossbars Ø 20 mm Right side of press sealed by door 1,000 x 800 mm with crossbars Ø 20 mm Press operation can be manual, semi-automatic, or fully automatic.

Būklė: naudotas, pavaros tipas: kitas, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, spaudimo jėga: 400 t, Hydraulic 400-ton Column Press Suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 – 450 mm/sec b) Opening speed: 50 – 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 – 60 mm/sec (adjustable via touchscreen) d) Piston accumulator with approx. 4 nitrogen cylinders e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots according to customer specifications h) Table, ram, and press head are stress-relieved annealed. i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 (footprint) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light barriers, 14 mm, on front and rear sides Hsdpfx Ajg Iihwob Ssni p) Oil circulation cooling (adjustable via touchscreen) q) Pressure-holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision milled s) Laterally monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m distance from the press u) Pressure adjustment from 50 to 400 tons (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programmable operation, setup mode, single stroke + continuous stroke (adjustable via rotary switch) x) Swiveling control console with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine frame primed and painted bb) Installation, commissioning, and training available at additional cost The hydraulics of the presses we offer are configured exclusively with BOSCH-REXROTH/Parker/HAWE components. Only (SIEMENS) components that are readily available in Germany are used in the control cabinet. Safety technology is supplied entirely by SICK, except for the light barriers. The control system is provided by SIEMENS (S7 1500), including the 15-inch touchscreen monitor. The delivery also includes the SIEMENS remote maintenance unit SECOME Ethernet. SPECIAL FEATURE: Our design with two press cylinders and the piston accumulator allows full performance to be achieved with a main motor of just 90 kW. Technical details are provided below in 1.3. Technical Specifications Design Press design: Column press Thermal neutral: 80 – 120°C Number of operating sides: 2 Forces Pressing force max.: 4,000 kN Free pull-off force max.: 600 kN Pressure build-up time (closed tool steel to steel): Max. 2 sec Dimensions – Minimum intended tool height: 600 mm Maximum opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (determined at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 t Speeds (see attached cycle diagram) Rapid-closing: 100 – 450 mm/s Pressing speed at F max.: [data continues]

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0362, spaudimo jėga: 250 t, Pressure: 250 t Passage width: 1800 mm Stroke: 600 mm Total power requirement: 22 kW Machine weight approx.: 24 t Dimensions L x W x H: approx. 3390 x 3400 x 3800 mm Column diameter: 160 mm Return force: 25 t Max. working height: 800 mm Table size: 1800 x 1600 mm Ram size: 2350 x 1600 mm Table height above floor approx.: 900 mm Hydraulic table traverse: 25 mm/sec Max. table load: 5 t Advance speed: 10 mm/sec Pressure phase speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 600 l Oil cooling (electric): 1.5 kW (max) Recommended oil: 46 grade / 10 my Monitor SIEMENS: 10 inch Vibration damping pads: The machine stands on four specially manufactured damping pads, each measuring 450x450x85 mm. Oil tank with oil cooling: The tank has a capacity of 1500 L. The oil is cooled by a dedicated pump, which is activated at 30°C. Oil filtration system: Independent from the main and cooling pumps, the press is equipped with a separate filtration circuit. The pump runs continuously but consumes only 1.5 kW. Energy-saving function: If the main pump is not required for a preset period, it switches to energy-saving mode and then consumes only about 2 kW/h. It is immediately fully operational again when pressure is required. Safety technology: Optionally, SICK or Pilz safety PLCs can be selected. The light barriers are either from the same manufacturer or from German manufacturer SCHMERSAL. Control cabinet: 40% of the cabinet space remains available for future installations. All components inside the cabinet are supplied by SIEMENS. Screws: All screws used on the machine are zinc-plated or yellow galvanized. Oil tray: The hydraulic block and pump are placed in a small oil tray to catch any oil during maintenance or hose changes. Noise emission: The press produces a maximum of 67 decibels according to standards. Accessories: Roller loading bridges: Hnedpfsfxyinex Ab Sji Two 1500 mm long loading bridges with rollers, removable, supports equipped with large heavy-duty casters. Parallelism monitoring: Both cylinders are monitored for parallelism using Balluff linear measurement systems and Sick wire-draw sensors. Parallelism monitoring is activated at the start of the pressing process. Monitoring precision can be configured in the control system. The function is deactivated during no-load travel. The respective positions are measured at the left and right sides of the ram using two SICK draw-wire encoders. The controller opens or closes the oil flow to the cylinders through special fast-acting valves. The required parallelism accuracy is less than one millimeter across the entire width.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, lazerio galia: 12 000 W, plieno lakšto storis (maks.): 80 mm, žalvario lakšto storis (maks.): 80 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, X ašies eiga: 1 550 mm, Y ašies eiga: 3 050 mm, Z ašies eigos atstumas: 290 mm, ruošinio svoris (maks.): 1 400 kg, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, bendras ilgis: 9 100 mm, bendras plotis: 3 120 mm, bendras aukštis: 2 200 mm, garantijos trukmė: 24 mėnesiai, darbo diapazonas: 3 015 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, Completely New Full-Cover Fiber Laser Cutting Machine | GS-CE/ GS-CE PRO Series | 3000–60000 W MACHINE IN STOCK AVAILABLE This FULLY ENCLOSED FIBER LASER CUTTING MACHINE from the GS-CE Series provides maximum safety when cutting metal. Thanks to the full enclosure and observation window made of protective glass, you can monitor the process while avoiding hazards such as laser radiation, sparks, etc. It is also equipped with a rapid exchange table, allowing for table changes in just 10 seconds. This will be your ideal solution for safe and efficient metal cutting! Working Table Sizes: 3000 mm * 1500 mm, 4000 mm * 1500 mm, 6000 mm * 1500 mm, 6000 mm * 2500 mm Laser Power: 6KW–80KW CNC System: FSCUT Max. Acceleration: 4G BOCI Cutting Head Hodpfx Aeub Nwdsb Sjni Intelligent Anti-Collision Feature Automatic Lubrication Schneider Relay Laser Fault Alarm Cooler Fault Alarm Laser Protection Glass Water Chiller TÜV CE Certificate Optional Feature: Automatic Loading and Unloading System Control Unit Supports Graphic Formats: AI, BMP, DST, DWG, DXF, DXP External Programming Complete system including chiller, extraction system, and safety light curtains Demo model in like-new condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2016, spaudimo jėga: 160 t, Pressure: 160 t Stroke: 600 mm Total power requirement: 7.5 kW Machine weight approx.: 7 t Return force: 16 t Hnodjfxyi Ispfx Ab Ssi Main cylinder: 1 unit Column diameter: 160 mm Installation height: 800 mm Table surface: 1200 x 800 mm Lateral column distance: 400 mm Table height: 850 mm Max. table load: 5 t Forward speed: 1 to 9.8 mm/sec Return speed: 1 to 9.8 mm/sec Oil volume AW 46: 220 l

Būklė: naujas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: DF0152, spaudimo jėga: 80 t, Pressure: 80 t Stroke: 500 mm Total power requirement: 12 kW Machine weight approx.: 5.1 t Operation: Two-hand control Cylinders: 1 Working height: 800 mm Working area: 800 x 800 mm Table size: 800 x 800 mm Ram plate: 2800 x 1300 mm Table height: 800 mm Approach speed: 9.8 mm/sec Working speed: 9.8 mm/min Return speed: 18 mm/sec Travel distance: 700 mm Column diameter: 75 mm Deep-drawing function motor: 10 kW Main motor: WEG 15 kW Pump: REXROTH, Parker electronic axial piston pump kW Deep-draw cushion capacity: 25 t (at 280 bar) Deep-draw cushion stroke: 200 mm Deep-draw cushion rod diameter: 30 mm Deep-draw cushion travel speed: 80 mm/sec Hydraulic block: REXROTH/Parker Hydraulic valves: REXROTH/Parker Hydraulic tank: 300 L Hydraulic tank oil capacity: approx. 250 L Hydraulic pressure control: via PLC (minimum pressure 10 t) Hydraulic air cooling: for oil cooling – with electric fan Hydraulic lubrication for guides: manual, via grease nipples or cartridges Electronic components: SIEMENS / MOELLER Control panel: on swivel arm Control: automatic via two-hand operation with key switch, manual via control panel in setup mode Operation: moveable two-hand operation USB interface: for data transmission Remote control: Siemens for remote maintenance Hnedpfjfxyh Hsx Ab Ssi Distance holder sensors: for stroke adjustment Pressure holding: 0–10 sec. Oil tank: 150 L Schmersal light curtains: 800 mm long, front and rear, 300 mm diagonally below

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Parker Hannifin Instron Hedjq Nyw Aepfx Ab Seni Hydraulic Power Unit Year of manufacture: 2008 Power: 90 kW Main fuse: 200 A Operating pressure: 285 bar Flow rate: 165 L/min Tank capacity: 850 L This offer is exclusively addressed to commercial customers as defined by § 14 BGB. No sale to private individuals!

Būklė: naujas, Gamybos metai: 2019, mašinos/transporto priemonės numeris: DF0329, spaudimo jėga: 350 t, Press force: 350 t Passage width: 3000 mm Stroke: 900 mm Total power requirement: 75 kW Machine weight approx.: 60 t Dimensions (L x W x H): 2660 x 5400 x 5700 mm Return force: 35 t Table size: 3610 x 1600 mm Ram size: 3610 x 1600 mm Table height above floor approx.: 900 mm Approach speed: 230 mm/sec Return speed: 170 mm/sec Oil tank: 2000 l Max. working height: 1700 mm Pressure phase speed: 21 mm/sec Rapid traverse speed: 200 mm/sec Oil cooling (electric): 3 kW (max) Control: SIEMENS S7 1500 Monitor: WEG 12 inch Hsdpfxsfxygze Ab Ssni

Būklė: naudotas, mašinos/transporto priemonės numeris: 4396, spaudimo jėga: 200 t, Pressure: 200 t Frame clear width: 1200x1000 mm Stroke: 600 mm Total power requirement: 32.5 kW Machine weight approx.: 20.5 t Return force: 20 t Main cylinder: 1 unit Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Axial piston pump: Rexroth/Bosch Installation height: 800 mm Working area: 1200x1000 mm Table and ram plate: 1200x1000 mm Working height: 1100 mm Forward speed: 170 mm/sec Return speed: 150 mm/sec Pressing speed: 15 mm/sec Oil capacity: 500 l Socket: 220 V Storage capacity: 200 programs Pressure adjustment: 20-200 t via monitor Hnsdpfxefxyh As Ab Sji Adjustable speed in automatic and semi-automatic mode: 5-170 mm/sec Pressure holding time: 0-10 sec Setup mode speed: 2-10 mm/sec Draw cushion: 750x950 mm Draw cushion stroke: 300 mm Draw cushion force: 5-50 t Draw cushion speed: 2-80 mm/sec Draw cushion weight: 1000 kg Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as CE declarations (all provided in duplicate, both printed and on data carriers) - 1 set of seals and filters

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25.12.15, Fresan FP 100P - C-Frame Eccentric Press - 100 Tons (1000 kN) TECHNICAL DETAILS: * Capacity: 100 tons (1000 kN) * Strokes per minute: 60 SPM (adjustable) * Table to slide distance: 445 mm * Stroke adjustment: 0 - 132 mm * Slide adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm STANDARD FEATURES: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made of alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings quality SnBz-12 * Pneumatic clutch-brake combination * Fully enclosed, oil-lubricated helical gear drive * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * Six-point slide guidance with waste oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate via AC inverter Hnsdponxh T Rofx Ab Sji * Motorized slide adjustment * Mechanical overload protection (Hydraulic safeguard can be retrofitted to a standard machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & waste oil collector (spindle oil / slideway lubricant) OPTIONAL EQUIPMENT: * Additional clamping plate * Part ejector (upper and/or lower, mechanical or pneumatic) * Material feeding, loading and unloading systems (decoiler / uncoiler, straightener, pneumatic or servo feed unit) * Custom-engineered machine

Būklė: naudotas, Gamybos metai: 2001, mašinos/transporto priemonės numeris: H01-3129, spaudimo jėga: 200 t, Pressure: 200 t Passage width: 1300x1300 mm Stroke: 1000 mm Total power requirement: 37 / 5.5 kW Approx. machine weight: 29,500 kg Space requirement approx.: 2600x3000x5200 mm Speeds: 450 mm / free fall Speeds: 20 mm/sec Hedpfx Asfhcc Neb Sjni Overrun distance: 130 / 60 ms Oil pressure: 283 bar Oil tank capacity: 2200 L

Būklė: naudotas, Gamybos metai: 2017, spaudimo jėga: 500 t, Pressure: 500 t Clear passage width: 1300x800 mm Stroke: 600 mm Machine weight approx.: 18 t Space requirement approx.: 2400 x 2400 x 5500 mm Retraction force: 50 t Operation: Two-hand control Cylinder: 1 unit Motor: 50 kW Oil cooling: electric Column diameter: 200 mm Working height (distance between ram & table plate): 700 mm Table size: 1900 x 800 mm Table height above floor approx.: 1000 mm Ram plate: 1300 x 800 mm Approach speed: 150 mm/sec Working speed: 5-10 mm/sec Return speed: 150 mm/sec Oil tank: 1500 l Oil volume: 1400 l Functionality of the control system: Hjdpfx Asd E Irmsb Ssni The linear measuring rod informs the control system of the ram and ejector positions. Travel path, upper stop point, and the switching point where the press switches from approach to working speed, as well as the target end position, can be input quickly and easily via the monitor control. Working speed can be set in increments of 1 mm/sec from 2 to 15 mm and in 10 mm steps from 15 to 150 mm. Additionally, the machine features pressure monitoring, allowing either for the ram to return upwards once the required pressure is reached, or for the pressure to be held constant (within 5% tolerance) for a preset time before opening. The control monitors secured areas, the entire hydraulic system, the pumps, and the temperature. Moreover, it synchronizes the main cylinders and compensates for uneven loading as necessary. The control system is housed in an attached control cabinet. Operation of the press itself is via an adjustable two-hand control, reducing operating distances. Further information: The offer includes detailed 3D drawings, to be reviewed and confirmed by the customer. Columns and cylinders are made from tool steel, induction hardened and chrome plated on the outside. The ram guides are manufactured using bronze sliding bushings. Scope of delivery includes: - Manuals and operating instructions for the motors, pumps, and the press itself, as well as the CE declaration (each provided in duplicate) - Safety inspection by a qualified company - The machine complies with the EU Machinery Directive 2006/42 for hydraulic presses and DIN EN 693/2011

Būklė: naujas, New hydraulic high-speed presses from min. 300t up to max. 2500t. We provide new mechanical and hydraulic presses for various applications, tailored to your specific requirements. Simply let us know your needs and we will prepare an attractive offer including installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be an official distribution partner since 2020 and look forward to your inquiry. Hjdpjf Rt Irsfx Ab Sjni

Būklė: naujas, Gamybos metai: 2018, mašinos/transporto priemonės numeris: DF0116 - Rev.00, spaudimo jėga: 110 t, Press force: 110 t Hsdpfodxvflsx Ab Ssni Passage width: 1300 mm Stroke: 1500 mm Machine weight approx. (without operating fluids): 12 t Dimensions (L x W x H): approx. 2300 x 2090 x 4200 mm Return force: 11 t Max. working height: 1500 mm Ram plate: 1730 x 1100 mm Table plate: 1730 x 1100 mm Table height above floor approx.: 700 mm Column diameter: 140 mm Ram plate thickness: 100 mm Clamping plate thickness: 100 mm Noise level (max.): 67 dB Machine body colour: RAL 7035 Moving parts colour: RAL 2009 Other component colour: RAL 7021 Cladding and balcony colour: RAL 1021 Motor power: 18 kW Max. rapid advance speed: 300 mm/sec Pressing phase speed: 15 mm/sec Oil tank: 150 l Control system Siemens: S7 1200