Frezavimo staklė

LEADERMAC THUNDERMAC 923T NOT WEINIG

Būklė: dilaminuotas dirbtuvėje (naudotas), Leadermac Thundermac 923T Velenai: 9 x 50 mm x 6000 aps./min. Apatinis (22 kW) - Dešinys (15 kW) - Kairys (15 kW) - Dešinys (15 kW) - Dkedpfx Asyl Rmdoi Son Kairys (15 kW) - Viršutinis (22 kW) - Apatinis (22 kW), Viršutinis (22 kW) - Apatinis (22 kW). Darbinis plotis: 250 mm, aukštis: 160 mm. Maks. padavimo greitis: 100 m/min (Galima padidinti iki 150 m/min) Tiesūs obliavimo agregatai. Profilio obliavimo agregatai. Jungtis: 380 V / / 50 Hz, 400 A. Pridedama pilna dokumentacija.

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm Dkodpfx Aswvqklji Sjn • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Gamybos metai: 1990, būklė: dilaminuotas dirbtuvėje (naudotas), Four-side planer WEINIG, 7-head, universal, head configuration: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and final universal head. Drive is implemented using cardan shafts. Head protection with Rotax safety clutches. Workpiece feed clamped pneumatically. Continuously adjustable feed through frequency inverter. Feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally equipped with new wiring and new electrics. Machine fully refurbished. Warranty provided. Dkedpfspqxnxex Ai Sjn

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2017, Velenų skaičius: 4 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Padavimo variklis: 11 kW Padavimo greitis: 60 m/min. Valdymas: Memory Plus Obliavimo ir profiliavimo automatas Weinig Powermat 2400, skirtas medienos keturpusiam obliavimui ir profiliavimui, su įtraukimo mechanizacija Weinig High Mech E 1 ir ištraukimo mechanizacija su sukamuoju krovimo automatu Sicko. Įrenginys turi Memory Plus sistemą su elektroniniu 3 ir 4 velenų (radialiniu) pozicionavimu ir stalų MarathonPowerCoating PLUS padengimu. Dksdpsyhfhnsfx Ai Ssn Paskutinis techninis aptarnavimas atliktas gamintojo 2025 m. gruodį. Įrenginys vis dar naudojamas ir gali būti apžiūrėtas bet kada. Numatomas prieinamumas nuo 2026 m. rugsėjo mėn. Velenas 1: apačia / 15 kW / 50 mm / 6.000 aps./min. Velenas 2: dešinė / 15 kW / 50 mm / 6.000 aps./min. Velenas 3: kairė / 15 kW / 50 mm / 6.000 aps./min. Velenas 4: viršus / 18,5 kW / 50 mm / 6.000 aps./min.

Būklė: labai geros būklės (naudotas), Keturių pusių obliavimo staklės Weinig Hydromat 23C Darbinis plotis: 230 mm Darbinis aukštis: 160 mm Velenų kiekis: 7 Velenų išdėstymas: 1. Apačia 15 kW 2. Dešinė 7,5 kW 3. Kairė 7,5 kW 4. Viršus 15 kW 5. Apačia 30 kW (daugiažiaunė) Dedpoxlcufefx Ai Sekn 6. Apačia 7,5 kW (hidro atrama) 7. Viršus 7,5 kW (hidro atrama) Velenų apsukų skaičius: 6000 aps./min. Veleno skersmuo: 50 mm 4 traukimo voleliai darbiniame stale Padavimo greitis reguliuojamas dažnio keitikliu iki 36 m/min Padavimas varomas kardaniniu velenu Pneumatiniai prispaudžiantys voleliai Techninė dokumentacija

Būklė: naudotas, Gamybos metai: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- LIKE NEW, DEMONSTRATION MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4,500 – 8,000 rpm - Width and height motorized positioning: left spindle radial top spindle axial - Feed beam motorized positioning - Further motorized positioning: Dodpewgwmnefx Ai Sskn right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (with tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm The machining of the workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter, and feed speed. Adjustments to the operating parameters may be necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbet cutter: diameter difference 20–25 mm to the planing head Important: Machine cannot be operated without a jointer rabbet cutter Suction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with frequency inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with frequency inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency controlled: 4000–6000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatically and dynamically adjustable via linear guides Standard profile depth: 20 mm Suction port D = 125 mm Extraction: individually adjustable chip deflector plate Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with f...

Būklė: geras (naudotas), Gamybos metai: 1978, WACO HM200 UNIVERSAL, Planer-Moulder with 10 Spindles Year of manufacture: 9/1979 S/N 31469.708 Moulder with hydraulic feed and powerful spindle motors. Feed speed: 0-50 m/min Counter-supports on all horizontal spindles. 1st / 5th / 8th / 10th spindles equipped with jointer units Dodpfx Aieiz Tzxo Sokn Infeed table length: 200 cm Technical Description: Working range: 200x100 mm (width x height) Spindle Configuration: 1st spindle bottom, 7.5 kW (10 HP) 2nd spindle right, 7.5 kW (10 HP) 3rd spindle left, 11 kW (15 HP) 4th spindle top, 7.5 kW 5th spindle top, 7.5 kW 6th spindle right, 7.5 kW (10 HP) 7th spindle left, 11 kW (15 HP) 8th spindle top, 7.5 kW 9th spindle bottom, 7.5 kW 10th spindle bottom, 10 kW Bottom spindle max. tool diameter: 160 mm, working length: 210 mm Side spindles (right/left) max. tool diameter: 200 mm, working length: 110 mm Top spindles max. tool diameter: 225 mm, working length: 210 mm Spindle diameter: 45 mm Dimensions (L x W x H): Weight: 10 t

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), For sale, we offer a complete line: System TM Bison loading machine, Weinig Hydromat H 22 B, year 1989, System TM Angus unloading unit. Processing dimensions: length 450–2500 mm, height 20–80 mm, width 45–160 mm. Djdetqdfijpfx Ai Sjkn

Būklė: beveik kaip naujas (naudotas), grandis plotis: 210 mm, Transportavimo grandinė, plotis 210 mm, 59 nareliai, Interholz RAIMANN, Freiburgas, Weinig Dksdpfsqwdvgox Ai Ssn

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, working width 250mm working height 140mm 8 heads 3 toothed rollers in the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom infinitely variable feed speed up to 100 m/min spindle diameter 50mm Dkedpeww H Rwsfx Ai Sjn spindles supported on both sides feed on cardan shafts spindle speed 6000 rpm pneumatic pressure of feed rollers adjustment of heads in two axes cast iron frame