Formier

Weinig Hydromat 25R 100m/min

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, working width 250mm working height 140mm 8 heads Ledpfsx Sw T Sex Akvjrn 3 toothed rollers in the infeed table head arrangement: bottom/right/left/right/left/top/top/bottom infinitely variable feed speed up to 100 m/min spindle diameter 50mm spindles supported on both sides feed on cardan shafts spindle speed 6000 rpm pneumatic pressure of feed rollers adjustment of heads in two axes cast iron frame

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system Ledpfowvqklex Akvjrn • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated Lsdpfsu Agh Sex Akvsrn 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Ledpfxefi Tg Hs Akvorn Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: geras (naudotas), Radio-controlled quick-clamping carriage, fully hydraulic, with hydraulic auxiliary carriage. Track gauge 840 mm. Control panel and electrical switch cabinet. Lrsdod Nqrqepfx Akven

Būklė: naujas, Velenų skaičius: 6 vnt. Darbinis plotis: 250 mm Obliavimo aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Padavimo variklis: 4 kW Padavimo greitis: 6–24 m/min. Svoris: 4770 kg Matmenys (Ilgis/Plotis/Aukštis): 4722x1860x1776 mm Keturių pusių obliavimo staklės Kuper SWT XL-6, langų versija su elektroniniu ašių bei radialiniu velenų reguliavimu. Tvirta, nedeformuojama ir žemo vibracijos lygio staklių bazė. Velenų skaičius: 6 Darbinis plotis: 250 mm Darbinis aukštis: 150 mm Lyginimo stalo ilgis: 2500 mm Veleno apsukos: dažnio valdomos 4000–8000 aps./min. Padavimo greitis: 6–24 m/min Išsamesnį aprašymą rasite pridėtame PDF faile! Lrsdovnv Ubopfx Akvjn (Techniniai duomenys pagal gamintoją – be garantijos!)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, pagaminta 1981 m., su praeinama garso izoliacijos kabina KASCHWIG – beveik nauja, pagaminta 2017 m. • Trumpas įleidimo stalas su sunkiu 6 volelių įleidimu 1. apatinis velenas 11,0 kW 2. dešinysis velenas 11,0 kW 3. kairysis velenas 11,0 kW 4. viršutinis velenas 15,0 kW 5. apatinis velenas 11,0 kW 6. apatinis velenas 11,0 kW Lrsdpstkt Tpjfx Akven • Hidraulinė padavimo sistema 6-60 m/min. • Padavimo variklis 22,0 kW • 4 pavaromis varomi stalo volai • Veleno skersmuo 50 mm • Automatinis stalo tepimas • 1, 4, 5 ir 6 velenai su atraminiais guoliais • 1 ir 4 velenai su tiesia griovimo funkcija • Padavimo volai 170 mm • 4 vnt. hidroobliavimo galvų 150 mm • 6 vnt. hidroobliavimo galvų 250 mm • Ištraukimo jungtis virš mašinos

Būklė: naudotas, Gamybos metai: 1994, WEINIG PROFIMAT 23 AUTOMATIC 5-SPINDLE MOULDER – USED Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Lsdpfxjrm Rxwj Akvorn Voltage: 380/50

Būklė: geras (naudotas), Kodas: 0136 Prekės ženklas: ITALPRESSE Lrodpfx Ajpbvqvekvon Modelis: FORMATIC 20.9 Hidraulinė membraninė presas Dvipusis lukšto laminavimas prie vienoje pusėje profiliuotų, kitoje - lygių plokščių, skirtų spintelių fasadų, stalčių priekinių panelių, rašomųjų stalų paviršių, valgomojo stalų ir virtuvės paviršių gamybai. Trimatė (3D) plastikinių folijų (PVC, PPE, ABS, transferinė folija) laminacija prie vienoje pusėje profiliuotų plokščių, gaminant: spintelių fasadus, stalčių priekines paneles, rašomųjų ir valgomojo stalų paviršius, virtuvės paviršius, prekybinės įrangos komponentus, vidaus duris ir pan. Plokštelės matmenys: 2000 x 900 mm Atstumas tarp plokštelių (daylight): 325 mm Cilindro eiga: 325 mm Elektrinio katilo galia: 27 kW Spaudimo jėga: 300 t Cilindrų skaičius: 3 vnt. Hidraulinės stoties galia: 5,5 kW Slėgio valdymo manometras Automatinis slėgio atstatymas Atidarymo laikmatis Bendrieji matmenys: 3300 x 1400 x 2400 mm (aukštis) Svoris: 8100 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, PRIBO PATERNOSTER SUDĖTUVAS PASIŪLYMAS APIMA 1. PROBO IŠEINAMASIS KONVEJERIS SU DEŠINIOJO KAMPO PERDAVIMO KONVEJERIU. 2. PRIBO Q1020 PATERNOSTER SUDĖTUVAS. 4. 2X AUTOMATINIAI PADĖKLŲ ŽURNALAI 1200MM. MINIMALUS ILGIS APIE 1900MM. MAKSIMALUS ILGIS 4500MM. PAKETO PLOTIS 1200MM Lrjdpfjy Hb Upjx Akven PAKETO AUKŠTIS 1200MM MAKS. TALPA 5 SLUOKSNIAI PER MINUTĘ TINKA SUDĖTI PO FORMAVIMO STAKLIŲ, KRAŠTŲ PJOVIMO, PERPJOVIMO, DET IR KT.