Pramoniniai robotai

Kuka KUKA KR60-3 F Foundry

Sąlyga: naudotas, Gamybos metai: 2020, Technical Details: Swing Diameter: 670 mm Turning Length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Maximum Swing Over Bed Cover: 700 mm Travel Paths Turret No. 1 (Milling Spindle) x/y/z: 495 / ± 150 / 1562(+164) mm B-Axis Rotation: -30° / +210° Rapid Traverse Turret 1 (Milling Head) x/y/z: 40/40/40 m/min Milling Spindle Speed: 12,000 rpm Drive Power - Milling Spindle: 20.2/18.8 kW Milling Spindle Torque: 120 / 44 Nm Tool Interface Milling Spindle: Coromant Capto C6 Tool Magazine for Milling Spindle (Turret 1): 76 Tool Change Time Tool/Tool Milling Spindle: 1.25 s Spindle 1 Speed: 3,000 rpm Spindle 1 Power: 36 / 30 / 25 kW C-Axis Spindle 1: 0.001° Bar Capacity Spindle 1: 102 mm Spindle 2 Speed: 4,000 rpm Spindle 2 Power: 26 / 22 / 15 kW C-Axis Spindle 2: 0.001° Bar Capacity Spindle 2: 80 mm Space Requirement approx.: 7.8 x 3.6 x 2.9 m Linear Glass Scales on Axes: X, Y Programmable Steady Rest: KLU-A530 & SLU-X3.2 Accessories: Chip Conveyor Tool Measurement Spindle Load Monitor Air Blow System Air Blow System via ICS System to the Tool Spindle 1 Power Chuck Kitagawa 250 (B 210) mm Spindle 2 Power Chuck Kitagawa 250 (B 210) mm Interface for Internal Coolant Supply 70 bar Tailstock Specification for Sub Spindle Workpiece Measurement with Renishaw OMP60 Probe Detachable Handwheel Workpiece and Total Counter Three-Color Signal Lamp Robot Interface Matris Robot System R-2000iC/165F Automatic Door Rotoclear Viewing Window Fast Clamping Cycles Program Restart Four-Color Signal Lamp Ethernet I/P Interface Manual Tool Measuring Arm Automatic Door Oil Mist Separator Oil Skimmer Spindle Probe for Workpiece Measurement External Air Blow System for Sub Spindle Spindle 1 Coolant Nozzle Spindle 2 Coolant Nozzle Coolant Gun Internal Coolant Supply 70 bar with Knoll Filtration Very high-quality CNC turning-milling center equipped with sub spindle, which can also be used with tailstock function. The machine has an automatic door and Matris robot system type R-2000iC/165F. Guodpfxowl Ag De Abmjk

Sąlyga: naudotas, Gamybos metai: 2014, bendras svoris: 2 405 kg, keliamoji galia: 500 kg, valdiklio modelis: KRC4, Įranga: dokumentacija / vadovas, Scope of delivery/accessories: Gjdpfx Aeulc Ulsbmsuk Mechanics, control cabinet, operator panel, cables

Sąlyga: labai geros būklės (naudotas), a truly unique item, approx. 12 x 6 m Godpfx Asfi Tmcobmsuk

Sąlyga: naudotas, Gamybos metai: 2010, Maximum turning diameter: 410 mm Gusdpfx Aevzhiwebmjk Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range max.: 4,000 rpm Main spindle drive power: 35 / 45 kW Maximum torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Maximum usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool positions: 12 stations Number of driven tool stations: 12 stations Speed range - driven tool stations max.: 4,000 rpm Drive power (driven tool stations): 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec. Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirements: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Connection for bar feeder / bar loading magazine

Gamybos metai: 2001, Sąlyga: naudotas, Max. pressure: 500 t, max. operating temperature: 370°C, oil-heated, oil-cooled, with secondary circuit for heat recovery, overhauled in 2014. Gujdodwf Dbopfx Abmsk

Sąlyga: geras (naudotas), Gamybos metai: 2014, X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 880 mm Pallet size (2x): 500 x 500 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Distance spindle center to table: 80 - 810 mm Milling spindle drive: 30 kW Maximum torque: 102 Nm Max. workpiece weight: 500 kg Max. workpiece diameter on pallets: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 sec Max. feed rate: 60,000 mm/min Rapid traverse: 60 m/min Tool changer capacity: 40 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent station empty: 320 mm Max. tool weight: 30 kg Chip-to-chip time: 4.4 - 10 sec Tool-to-tool change time: 1.95 sec Operating hours: 15,894 h Total power requirement: 46 KVA Machine weight: approx. 15 t Space requirement: approx. 5.5 x 3 x 2.8 m Well-maintained horizontal machining center DMG-Mori, model NHX 5000, year of manufacture 2014, with Siemens 840D CNC control, two pallets, and 40-position tool changer. Indicated on-time: 23,262 h, spindle hours ONLY 15,894 h! Further data: Guodpfx Aev Htitobmjk Distance spindle nose to table center: 70 - 950 mm Pallet indexing time: 1.3 sec B-axis indexing (table): 360 x 1 degree Jog feed rate: 0 - 5,000 mm/min This is a used machine, therefore we sell under exclusion of any warranty. STOCKING DEALER WITH OWN 1,600 m² WAREHOUSE

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system – Monitoring of supply temperature by electronic safety temperature limiter – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves Gujdpog Ey Rfefx Abmok – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.*

Gamybos metai: 2022, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, We are offering for sale an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 tabletop model with 3 load cells and a wide range of accessories (see photos) Configuration: E1-F1-G1 50kN Year of manufacture: 2022 Weight: 151 kg Load cell: 50kN 2530-50kN/165541 Load cell: 5kN 2530-5kN/166885 Load cell: 500N 2530-500N/164475 Software on USB stick: Bluehill Universal Version 4.29.29784 Gjdpfx Abewz Iktomouk Software also installed on PC Last service and calibration: August 2024 Next service and calibration: August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring Instron's patented operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are ideal for performing tensile, compression, bending, peel, puncture, friction, shear, and many other tests, and can be used with a wide variety of grips and fixtures from our extensive accessory catalogue. Overall height: 1604 mm Maximum vertical test space (test daylight - base to underside of crosshead): 1198 mm Test types: Tensile, compression, and through zero operation Basic control mode: Displacement control Capacity – kN (lbf): 50 (11240) Maximum speed – mm/min (in/min): 508 (20) Minimum speed – mm/min (in/min): 0.05 (0.002) Max. force at max. speed – kN (lbf): 25 (5620) Maximum speed at maximum force – mm/min (in/min): 254 (10) Return speed – mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of set speed at constant rate, no load Position (crosshead) display accuracy: No load, ±0.02 mm (0.0008 in) or ± 0.10% of indicated value, whichever is greater Position (crosshead) repeatability – mm (in): ± 0.015 (0.0006) Load measurement accuracy: ± 0.5% of reading down to 1/200 of the load cell's rated capacity Strain measurement accuracy: ± 0.5% of indication down to 2% of full scale with extensometer meeting ASTM E83 Class B or ISO 9513 Class 0.5 Financing or leasing options for the offered item are available upon request!

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2012, mašinos/transporto priemonės numeris: 925624, KUKA Unused stock item KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1412 kg Serial number: 925625 Includes connection cables: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05, serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot specifications: Repeatability: ± 0.06 mm Axis 1: ± 185º Axis 2: -140º / -5º Axis 3: -120º / 155º Axis 4: ± 350º Axis 5: ± 122.5º Axis 6: ± 350º Robot movement speed in º/s Axis 1: 105º/s Axis 2: 107º/s Axis 3: 114º/s Axis 4: 136º/s Gjdpsrfch Usfx Abmeuk Axis 5: 129º/s Axis 6: 206º/s

Sąlyga: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Guodeia Rtdjpfx Abmsk Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or