Vertikalios tekinimo staklės

EMAG VSC 250 DS

Būklė: naudotas, Gamybos metai: 2004, Turning diameter 250 mm Turning length 100 mm Control SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7,500 kg Space requirement approx. m E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece loading Type VSC 250 DS Year of manufacture: 2004 # M7 28.69324 Max. turning diameter: 250 mm Turning length internal/external approx.: 100 mm Workpiece length min./max.: 29 – 100 mm 6-station tool turret diameter or swing diameter: 480/790 mm Slide travel X / Z (workpiece slide!) / stroke: 680 / 400 / 200 mm Feed / rapid traverse X/Z: 45 / 30 m/min. Feed force X/Z: 5.5 / 11 kN Cjdpfx Ajt Hxa Tjkkerf Spindle speeds: 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight: 7,500 kg Accessories / Special Equipment • CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming and all common options, cycles, and subprograms, etc. • 6-station hexagonal tool turret with 6 tool holders (∅ 40), non-driven, but with swivel axis (B-axis), double bearing and direction logic • 2 GMN grinding spindles on turret positions T3 and T6, speeds approx. 42,000 rpm and 18,000 rpm, one equipped with CBN wheel and 1x with ceramic pin • Workpiece loading device with recirculation system using drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device at workpiece change for pre-measurement and finishing dimensions • NORGREN air gap measurement system (?), hydraulic weight compensation of main spindle • SMW-Autobloc 3-jaw membrane chuck (for easier pick-up of raw parts) approx. ∅ 250 mm, with clamping monitoring • HYFRA cooling unit for spindle cooling and thermal stabilization of the machine bed, sophisticated SEITZ paper band filter system and retractable chip conveyor, coolant chiller for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC lathes offer a thermo-stable design (chips do not fall on the machine bed) and fast workpiece change times (pick-up system via main spindle) and a stable tool arrangement that also enables unconventional machining operations. Here, hardened gears were hard-turned and ground. Condition: good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 1 200 mm, matavimo diapazonas Y ašis: 2 000 mm, matavimo diapazonas Z ašis: 1 000 mm, Measuring ranges: X-axis: 1200 mm Y-axis: 2000 mm Z-axis: 1000 mm Length measurement uncertainty (ISO 10360) E = [2.6 + 4L/1000] µm CNC control: Renishaw UCC S5 Handheld unit: Renishaw MCU-5, optionally wireless MCU-5W Temperature sensors: Renishaw Probe system: Renishaw REVO-2 5-axis scanning system Probe changer: Renishaw (Price for REVO approx. €80,000 new) Codpodv I Abefx Akkjrf Software: Inspect3D Inca V6 new license (all languages) Year of manufacture: 2014, modernized in 2017 and 2025 Exchange against other CMM possible

Būklė: geras (naudotas), Gamybos metai: 2002, Machine type: CNC Lathe Codpfekyrwwex Akksrf Manufacturer: Reinecker Karstens Kopp - EMAG Model: VSC 250 DS Serial number: M02.43446 Year of manufacture: 2002 Available immediately Ex-works, self-dismantling Dismantling and loading can be offered as an option

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Parduodamas EMAG kombinuotas vertikalus CNC tekinimo ir apvalaus šlifavimo centras. Griebtuvo skersmuo: 250 mm, maks. apsukimo skersmuo: 260 mm, X/Z eiga: 680 mm/200 mm, greitaeigis poslinkis X/Z: 45 m/min/30 m/min, šlifavimo verpstės greitis: 45 000 aps./min., įrankių vietų: 12, krepšio matmenys X/Y: 400 mm/600 mm, krepšių stulpas: 3. Staklių matmenys X/Y/Z: apie 3200 mm/1900 mm/2650 mm, svoris: apie 8000 kg, valdymas: Siemens 840DS, darbo valandos: apie 35 000 h, programos valandos: apie 22 000 h. Yra dokumentacija. Galima apžiūra prijungus prie elektros vietoje. Crsdpfx Asx Dm Dzokkef

Būklė: naudotas, Gamybos metai: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Center height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal CNC External, Internal and Surface Grinding Machine with polygon, non-circular, multi-edge, and thread grinding capability BWO CNC control type 900 C, type K 51 - 1500 Year of manufacture: 2000 Serial No. 99 033 ----- Center height: 180 mm Distance between centers / grinding length: 1,700 / 1,600 mm Max. workpiece weight between centers: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Csdjt Hw Rdspfx Akkjrf Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/surface/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle carrier with 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / cross slide travel: 360 mm Grinding slide feed: 0.001 – 125 mm/min Workpiece spindle speeds, infinitely variable: 1 – 1,000 rpm C-axis spindle mount / bore: 24 mm, MK 4 Table speed (Z-axis): 0.01 – 10 m/min Total power installed: 40 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: Universal CNC cylindrical grinding machine suitable for almost all grinding tasks, in particular also for non-round grinding / eccentric/cam contour grinding and polygon grinding as well as face grinding on multi-edged workpieces and even thread grinding with appropriate grinding wheel profiles. Freely programmable BWO CNC control with a variety of subprograms and simple parameter input. Grinding of multiple diameters in a single setup possible. • B-axis with three grinding spindles, one of them with MOVOMATIC touch probe • MOVOMATIC pneumatic diameter measurement head CR 60, for mounting on the grinding table, control unit type ES 400, • MPM grinding wheel balancing device, straight dresser with diamond fleece mounted on the table, powered diamond wheel dresser, • Workpiece headstock pneumatically shiftable, hydraulic tailstock with adjustable quill, • Various other accessories, but without coolant system Condition: Good to very good – ready for demonstration under power, Ideal machine for spindle manufacturing, etc. Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice

Būklė: naujas, Load capacity: 40,000 kg Length: 8,000 mm Crjdpfsfrzwfex Akkjf Width: 3,000 mm Height: 900 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 540 / 300 dual mm Dimensions (L x W x H): 9.9 x 3.0 x 0.9 m Heavy-duty trailer with: - Double steering - Small turning radius - Anti-tipping due to steering angle limitation - Very robust, resulting in low maintenance - Swappable drawbar - Impregnated wooden platform - Standard paintwork changes; available in your desired RAL colour on request Images show a 30-ton model. Other load capacities and dimensions available on request – please contact us.

Būklė: naudotas, Gamybos metai: 2002, Apžvalga Ši pilna PET išpilstymo linija buvo pagaminta laikotarpiu nuo 1999 iki 2007 metų Krones (Vokietija) ir kitų Europos tiekėjų. Šiuo metu ji vis dar eksploatuojama ir naudojama gazuoto vandens bei limonadų išpilstymui į 1,5 litro PET butelius. Linijos našumas siekia iki 16 000 butelių per valandą. Įranga buvo reguliariai prižiūrima ir yra geros techninės būklės. Prieinamumas: nuo 2025 m. rugpjūčio pabaigos. Techniniai duomenys - Našumas: iki 16 000 butelių per valandą (pagal 1,5 l PET butelius) - Formatai: 1,5 l PET buteliai (trumpa kakleliu ir dangteliu) - Butelių medžiaga: PET - Pilstytuvas: izobarinis pilstymo įrenginys Csdpfx Akjwzvl Seksrf - Gamybos metai: nuo 1999 iki 2007 (skirtingos mašinos) - Užsukamo dangtelio tipas: trumpas kaklelis - Etiketės tipas: OPP (Contiroll) Komplektacija - 1 x pūtimo mašina CONTIFORM S16 | Krones | 2002 | įskaitant preformų bunkerį ir aušintuvą - Oro transporteriai nuo pūtimo mašinos iki etiketavimo ir pilstytuvo - 1 x etiketavimo mašina CONTIROLL | Krones | 2000 - 1 x Triblokas 77/88/11 MECAFILL izobarinis pilstytuvas | Krones | 2002 | su metalo detektoriumi - 1 x maišytuvas gazuotam vandeniui ir gėrimams | apie 2000 - 1 x rašalinis spausdintuvas HITACHI RXS - Transporteriai tarp pilstytuvo ir tunelio - 1 x susitraukimo tunelis VARIOPAC | Krones | 2007 | 45 pak./min. - 1 x pakuočių rankenų aplikatorius TWIN PACK MDE INOX | 2003 | viena eilė, 45 pak./min. - Pakuočių transportavimas iki palečių kroviklio - 1 x palečių kroviklis KETTNER KR51112 Pressant Universal | 1999 - Palečių padavėjas su liftu ir transportavimo sistema - 1 x palečių apvyniojimo įrenginys ROBOPAC GENESIS | 2002

Būklė: naudotas, Gamybos metai: 2012, X-axis travel: 630 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Control: SINUMERIK 840D sl Siemens B-axis: 360° x 0.001° A-axis: -200° to +25° x 0.001° Spindle speeds - stepless: 20 - 18,000 rpm Drive power, 100% duty cycle: 28.00 kW Drive power, 40% duty cycle: 34.00 kW Torque at 40% / 100% duty cycle: 110 / 84 Nm Tool holder: HSK 63 Feed rate X/Y/Z axes: 1 - 100,000 mm/min Rapid traverse X/Y/Z: 100.00 m/min Feed force X/Y/Z: 9 / 6 / 9 kN Feed rate B-axis: 1 - 14,400 °/min Csdpfx Akevxwxveksrf Feed rate A-axis: 1 - 7,200 °/min Pallet size: 2x 500 x 500 mm Maximum workpiece weight: 400 kg Maximum workpiece diameter: 800 mm Maximum workpiece height: 800 mm Tool magazine with 63 positions Maximum tool diameter: 280 mm Maximum tool length: 550 mm Maximum tool weight: 15.00 kg Total connected load: 65.00 kW Machine weight approx.: 14.00 t Space required approx.: 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, and emulsion mist extractor. Machine was part of a production line, therefore supplied without chip conveyor and without coolant system.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, OEM – Marking Laser / Engraving Laser (with CO2 Laser Source) The complete system is equipped with a 30-watt CO2 laser source with a wavelength of 10,060 nm. The marking area is approximately 140 x 140 mm; optionally, up to 300 x 300 mm are possible. No external cooling is required. Power supply: 110...240 VAC / 50 Hz. Applications include laser engraving and material removal. The control software EzCad is installed on the accompanying laptop. The software language is selectable (German, English). Optionally, the laser marker can be equipped with a manually adjustable Z-axis. Cjdpfx Ajpyg N Askkorf The laser is prepared for integration into a higher-level system, but can also be used as a stand-alone solution. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. We are happy to support the customer in accordance with their requirements and after consultation.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N / 100 kg Maximum load between centres: 3000 N / 300 kg Z-axis Table swivel range: 10° Table drive, hydraulic: 0–4 m/min X-axis Longitudinal travel (infeed spindle): 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: plunge grinding / longitudinal grinding 4 presettable feed rates: mm/min/Ø: 0.01–48 4 presettable infeed amounts: mm: 0.001–0.1 Spark-out during stop grinding: s: 0–99 / 0–99 strokes Jog infeed: mm/Ø: 0.001 Crsdpfxstqf Rzs Akkof Universal swivelling grinding spindle head: 0–180° Grinding wheel (external): D x width x bore: 500 x 100 x 127 or 203.2 mm Grinding wheel (face, optional): D: 250 x 32 x 76.2 mm Grinding wheel (internal, optional): D: (2–250) mm Drive power (external, face): 5.5 kW (7.5 kW) Drive power (internal): 2.2 kW Peripheral speed (external): 35 (50) m/s Grinding wheel wear (external): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Workpiece headstock swivels on rotary part: 0–90° Tailstock: Quill mounting / quill diameter: MK 4 / 750 mm Quill stroke: 45 mm Quill force: 100–800 N / 250–1400 N adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40µ Connections: Total connected load: 6.5–10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Guideway lubrication pump: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 litres Pneumatics: 6 bar Comparable to Weiss, EMAG, GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat.