CNC tekinimo ir šlifavimo centras

EMAG VSC 250 DS

Būklė: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or Fsdpfx Acoia Rtde Hsfw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 59 234 h, Funkcionalumas: visiškai funkcionalus, This machine is being sold by a European corporation and has been exceptionally well maintained. Additional photos and video footage are available at any time. Technical data – DMC 210 FD Machine type: 5-axis machining center Model series: DMC 210 FD Machine category: Machining facility for material removal 3-axis milling machine NC program-controlled Year of manufacture: 2011 Condition: Very Good Operating hours: approx. 59,000 h Weight: 50,000 kg Control / CNC: CNC control; Siemens 840D Solutionline Number of axes: 5-axis machining center Type of control: Fully automatic (Code 017) Spindle / Tool: Tool holder: HSK 100 DIN 69871 HSK100 Spindle type: HSK100 Max. spindle speed: 6,300 rpm Max. feed rate: 60 m/min Max. tool weight: 35 kg Max. tool length: 450 mm Max. tool diameter: 250 mm Tool magazine / Metrology: Tool magazine: 280 positions Touch probe: Renishaw MP10 Travel paths: X-axis travel: 1,800 mm Y-axis travel: 2,100 mm Z-axis travel: 1,250 mm Table / Workpiece: Table length: 1,850 mm Table width: 1,850 mm Maximum workpiece length: 1,500 mm Maximum workpiece weight: 5,000 kg Power supply / Connection data: Mains connection: 400 V, 3/N, PE, 50 Hz Power consumption: 167 kVA Maximum current: 241 A Maximum pre-fusing: 250 A DC control voltage: 24 V DC AC supply voltage: 230 V AC Total installed power: 163 kW Equipment: Platform: available Coolant/lubricant system: available Chip extractor: available Operating manual/documentation: available Ffedpsx Sylkjfx Ac Hjw

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2012, Offered is a vertical turning and grinding center EMAG VSC 250 DS. The machine is mechanically overhauled and rebuilt by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-belt, L-belt, part flipper) and additional peripherals such as chip conveyor, coolant systems, etc. CONTROL SYSTEM Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-axis travel: 860 mm Z-axis travel: 200 mm MAIN SPINDLE Power: 28 kW TOOL CARRIER EMAG disk-type turret, 12x VDI 40 Console with grinding spindle 18 kW, 45,000 rpm Ffsdpfx Ash Tkdqec Hjw Delivery time and additional equipment for the machine upon agreement.

Būklė: naudotas, Gamybos metai: 2004, Turning diameter 250 mm Turning length 100 mm Control SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7,500 kg Space requirement approx. m E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece loading Type VSC 250 DS Year of manufacture: 2004 # M7 28.69324 Max. turning diameter: 250 mm Turning length internal/external approx.: 100 mm Workpiece length min./max.: 29 – 100 mm 6-station tool turret diameter or swing diameter: 480/790 mm Slide travel X / Z (workpiece slide!) / stroke: 680 / 400 / 200 mm Feed / rapid traverse X/Z: 45 / 30 m/min. Ffodpfx Ast Hxa Toc How Feed force X/Z: 5.5 / 11 kN Spindle speeds: 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight: 7,500 kg Accessories / Special Equipment • CNC path control SIEMENS 840 D with color screen, graphics, menu-guided dialog programming and all common options, cycles, and subprograms, etc. • 6-station hexagonal tool turret with 6 tool holders (∅ 40), non-driven, but with swivel axis (B-axis), double bearing and direction logic • 2 GMN grinding spindles on turret positions T3 and T6, speeds approx. 42,000 rpm and 18,000 rpm, one equipped with CBN wheel and 1x with ceramic pin • Workpiece loading device with recirculation system using drag frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device at workpiece change for pre-measurement and finishing dimensions • NORGREN air gap measurement system (?), hydraulic weight compensation of main spindle • SMW-Autobloc 3-jaw membrane chuck (for easier pick-up of raw parts) approx. ∅ 250 mm, with clamping monitoring • HYFRA cooling unit for spindle cooling and thermal stabilization of the machine bed, sophisticated SEITZ paper band filter system and retractable chip conveyor, coolant chiller for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC lathes offer a thermo-stable design (chips do not fall on the machine bed) and fast workpiece change times (pick-up system via main spindle) and a stable tool arrangement that also enables unconventional machining operations. Here, hardened gears were hard-turned and ground. Condition: good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Būklė: naudotas, Gamybos metai: 2014, maks. tekinimo skersmuo 160 mm maks. tekinimo aukštis 150 mm maks. ruošinio skersmuo 100 mm maks. ruošinio aukštis 150 mm maks. sukimosi greitis 6 000 aps./min X eiga 700 mm Z eiga 375 mm C ašis 360 ° Valdymas FANUC Vertikali tekinimo staklės | EMAG - VL2 Fodpfx Acoqvd Iqo Hofw Įrengta ruošinių cirkuliacine juosta. Staklės labai geros būklės. Atkreipkite dėmesį, kad techninės detalės buvo pateiktos pagal panašius įrenginius.

Būklė: paruoštas naudoti (naudotas), X ašies eiga: 750 mm, Y ašies eiga: 750 mm, Z ašies eigos atstumas: 725 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, 4-axis machining center, year of manufacture 2016, control system: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, dual pallet changer, pallet size: 500 x 630 mm, 60-position tool changer, tool holder HSK63, internal coolant supply (IKZ), Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper conveyor, infrared measuring probe. Fodpfxerx Sh Aj Ac Hjfw

Būklė: labai geros būklės (naudotas), CNC tekinimo staklės su Y ašimi DMG MORI - CTX BETA 800 4A MACH-ID 9282 Ffodpfxoxuqw Ho Ac Hsw Gamintojas: DMG MORI Tipas: CTX BETA 800 4A Valdymas: Siemens 840 D-SL Pagaminimo metai: 2012

Būklė: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 CNC control: SIEMENS 840D shopmill Tool magazine capacity: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Fedpfx Acjpumdce Hefw Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, IKZ (internal coolant supply) 40 bar, Prepared for Renishaw MP 10 infrared measuring probe, probe not included, Mechanical tool breakage detection, MQL (minimum quantity lubrication), Through-spindle air blast, Electrical oil mist extraction, Electronic handwheel, TRANSMIT function, Precision package, BA 4, Laminated safety glass (right door), Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including loading station, stacker crane, master computer and 10 pallets. Approx. 98,500 hours main switch ON Approx. 45,500 spindle hours

Būklė: geras (naudotas), Gamybos metai: 2015, X ašies eiga: 650 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 650 mm, 1 horizontal machining centre Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015, Fjdpeuav H Njfx Ac Hjfw Control: Siemens, Model Sinumerik 840D, Travel (X/Y/Z): 650 x 650 x 650 mm, 2-station pallet changer, pallet size 400 x 400 mm, NC rotary table 360° in 0.001° increments, 80-position tool changer, tool holder HSK 63, spindle speed 15,000 rpm, internal coolant supply (IKZ) 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, control and electrical cabinets, operating hours 43,698, spindle hours 5,401

Būklė: naudotas, Gamybos metai: 2017, Technical details: Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Machine weight approx.: 22.5 t Space requirements approx.: 4.7 x 3.65 x 3.0 m Fedpfxettxg Sj Ac Hefw