Įpurškimo liejimo mašina

KraussMaffei KM300-1900C2

Gamybos metai: 2003, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Csdpfx Afoiyyf Is Ajrb Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, A SIG Corpoplast blow molding machine is available. Output: 21,600 bottles/hour, bottle formats: 500ml/750ml/1000ml/1500ml, max. blow air pressure: 40 bar, dimensions (L/W/H): approx. 7000mm/4300mm/3100mm, weight: approx. 20,000 kg. Includes Transver AG preform feeder, year of manufacture: 2008, silo, elevator, sorter, and chute. Documentation available. An on-site inspection is possible. Cjdpfot Eu Azex Af Ajrb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Clamping force: 500 t Screw diameter: 80 mm Shot weight: 1,620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1,779 cm³ Csdpova H Amefx Af Asrb Injection pressure: 1,855 bar Platen dimensions: 1,300 x 1,200 mm Type: Horizontal Drive: Hydraulic

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 62 235 h, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 70 mm, bendras svoris: 25 100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Technical specifications at a glance: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ Cjdevxzw Nepfx Af Ajrb - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal structure - Removal cell with machine enclosure - Cardboard feeder - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This construction also offers advantages for automation, as robots and peripheral devices can be more easily integrated. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process control. The servo-hydraulic technology ensures energy-efficient operation and reduces the need for cooling water. Additionally, the machine includes a dosing device from MORETTO and a linear handling system from ENGEL, which support production automation and enhance overall productivity. With a total of 62,235 operating hours, the machine is in a used but functional condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, WITTMANN BATTENFELD MacroPower 900/8800 Injection Molding Machine Type: Servo-hydraulic injection molding machine Year of manufacture: 2017 Control system: UNILOG B8 INJECTION UNIT • Screw diameter: 105 mm • Screw stroke: 525 mm Crodpfx Aswzy N Uof Asb • L/D ratio: 22 • Calculated injection volume: 4,545 cm³ • Injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing capacity (PS): 151 g/s • Screw torque: 8,000 Nm • Nozzle stroke / nozzle contact force: 950 mm / 129 kN • Injection flow rate: 725 cm³/s • Injection flow rate with dual pump (option): 906 cm³/s • Open air shot with accumulator (option): 1,812 cm³/s • Cylinder heating capacity: 53.9 kW • Number of heating zones: 7 CLAMPING UNIT • Clamping force: 9,000 kN • Maximum opening stroke: 2,100 mm • Min./Max. mold height: 500–1,000 mm • Platen dimensions: 1,720 × 1,550 mm • Tie bar spacing: 1,200 × 1,000 mm • Ejector: stroke 300 mm / force 165 kN • Mold opening force: 300 kN GENERAL DATA • Pump motor power: 90 kW • Heating power: 53.9 kW • Oil tank capacity: 1,100 l • Machine dimensions (L × W × H): 10,100 × 3,400 × 2,700 mm • Weight: 35,200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Demag System 800/1120–9500 Injection Moulding Machine Year of manufacture: 2008 Additional equipment: Injection moulding machine equipped with a robot Clamping unit Parameter Value Clamping force 8,000 kN Platen dimensions (W × H) 1,620 × 1,500 mm Tie bar clearance (W × H) 1,120 × 1,000 mm Min. / max. mould height 500 – 1,050 mm Max. daylight between platens 2,080 mm Mould opening stroke 1,030 mm Ejector stroke 350 mm Ejector force 139 kN Max. mould weight 7,200 kg Injection unit Parameter Value Screw diameter 130 mm Injection volume 7,300 cm³ Shot weight (for PS) 6,640 g Injection pressure 1,300 bar L/D ratio (screw length/diameter) 20 Electrical & hydraulic equipment Parameter Value Pump motor power 110 kW Heater power 79 kW Oil tank capacity 1,300 litres Cedpfxewy U E Uj Af Aerb Dimensions & weight Parameter Value Machine dimensions (L × W × H) 12.3 m × 2.7 m × 2.7 m Total weight 33,500 kg (main unit) / 9,700 kg (ancillary equipment)

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Crjdsuiykdepfx Af Aeb

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2003, We are selling a complete Krauss-Maffei MC 4 control system, tested and fully functional! Credpfx Aoikfmhof Ajb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, 1 used injection moulding machine Manufacturer: NETSTAL Model: ELION800-270 Year of manufacture: 2007 Clamping force: 80 tons Tie bar spacing: 410 x 410 mm Min./max. mould height: 500 mm Opening stroke: 350 mm Screw diameter: 35 mm Csdpfx Aowf I Hisf Asrb Max. shot volume: 123 cm³ Shot weight in PS: 118 g

Būklė: geras (naudotas), Gamybos metai: 2004, VC330-80 plus Leto izdelave: 2004 Cedpfsvdqbhex Af Aerb Zapiralna sila: 800 kN Vbrizgalna enota: 330 Krmilna enota: CC200 A01 Premer polža: 40 mm Delovnih ur: 91.112 1x izvlek jedra 4x digitalni vhod, 4x digitalni izhod 1x enofazna vtičnica 1x trifazna vtičnica NOVA ČRPALKA