Įpurškimo liejimo mašina

KraussMaffei KM 650-3500 C 1

Būklė: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Nlodpfetrya Rox Ag Hsf Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), EXTRUDEX ekstruderis EN50-30D, pagamintas 2007 m., Nr. 4101264, su išlydžio siurbliu, tinklelių keitikliu ir 5 sluoksnių žarnos formavimo galvute. Pagamintas 2007 m. Taip pat 4 koekstruderiai EXTRUDEX EN25-25D, pagaminti 2007 m. PASKIRTIS: PE 5 sluoksnių žarnos gamyba. Maksimalus skersmuo – 32 mm. ĮRENGINYS: 1 vienos sraigtinės pagrindinis ekstruderis EN 50. 4 vienos sraigtiniai koekstruderiai. Ekstruzijos įranga yra mano nuosavybė. Vieta: Nlodpfx Agevyaxus Hsf D-26345 Bockhorn-Grabstede, Bahnhofstr. 6, Vokietija.

Būklė: geras (naudotas), Gamybos metai: 2006, Clamping force: 250 tons Tie bar distance: 630 x 630 mm Mould height: 330 x 830 mm Opening stroke: 675 mm Maximum diameter: 1505 mm Nljdpsrgw Exsfx Ag Hef Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runners: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm X, 900 mm Y, 1400 mm Z, 2500 mm

Būklė: naudotas, Stretch blow moulding machine by Etek ISBM Line = Injection stretch blow moulding Stretch blow moulding machine for single-use PET bottles from PET preforms Stretch blow moulding machine for rotary table production Nlodpekucxlefx Ag Hsf Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As-new condition

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Naujas įrenginys, sandėlyje esanti prekė, galima iš karto pristatyti. - Talpa 18 000 litrų - Maksimali temperatūra 350 °C - Vidinės matmenys (ilgis x plotis x aukštis) 4100 x 2100 x 2100 mm - Išoriniai matmenys (su bėgiais) 9970 x plotis 3060 x aukštis (su pakeliamais vartais) 6110 mm - Valdymo sistema „Eurotherm Nanodac“ - Temperatūros stabilumas (esant vardinei temperatūrai, be apkrovos) ±5 °C - Automatinės įleidimo ir išleidimo oro uždangos - Elektriniai pakeliami vartai - Elektrinis krovimo vežimėlis - Galia 247 ± 9 % kW Nodpfx Agsu Hma Nj Holf - 400 V, 50 Hz - Dokumentacija, CE deklaracija Mielai padėsime įrengti ir paleisti įrenginį, taip pat apmokysime jūsų darbuotojus. Kreipkitės! Parduodame naujas ir naudotas pramonines krosnis. Galima apžiūrėti mūsų sandėlyje, susitarus iš anksto! Krosnis, krosnys, atkaitinimo krosnis, degimo krosnis, grūdinimo krosnis, terminė krosnis, krosnis, atleidimo krosnis, emalio degimo krosnis, džiovinimo krosnis, pramoninė krosnis, terminis шкаfas, šildymo krosnis, temperatūrinė krosnis, džiovinimo шкаfas, kamerinė krosnis, didelė krosnis, krosnis su vežimėliais, krosnis su pakeliamu vežimėliu, judri krosnis, krosnis su bėgiais.

Būklė: geras (naudotas), Gamybos metai: 2013, spaudimo jėga: 16 000 kN, Įranga: dokumentacija / vadovas, Uždarymo jėga: 1600 t Sraigto skersmuo: 135 mm Atstumas tarp kolonų (vertikaliai): 1420 mm Atstumas tarp kolonų (horizontaliai): 1870 mm Įšūvio tūris: 9662 cm³ Tipas: Horizontalus Nlodeyh I Emepfx Ag Hsf Pavara: Hidraulinė

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 Njdpow U N Ixofx Ag Helf - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 kN, varžto skersmuo: 70 mm, Offer Details: Stock No. 14171 Manufacturer: Engel Machine Type: ES 2050 - 400 HL Year of Manufacture: 2005 Operating Hours: 70,000 h Control System: CC200 Screen Language: German Location: D-52249 Eschweiler Clamping Unit: Clamping Force: 4,000 kN Platen Size (H x V): 1,400 x 1,080 mm Min. Mold Height: 350 mm Opening Stroke: 1,300 mm Ejector Stroke: 250 mm Ejector Force Forward: 83 kN Injection Unit: Screw Diameter: 70 mm Injection Pressure: 1,482 bar Shot Volume: 1,155 cm³ Shot Weight (PS): 1,040 g Injection Flow: 419 cm³/s Screw Speed: 183 rpm Nozzle Contact Force: 110 kN Electrohydraulic Equipment: Rated Power of Pump Motor: 45 kW Dimensions and Weight: Space Requirement (approx.): 8.30 x 2.35 x 2.48 m Total Weight: 31,200 kg Accessories: - Vibration elements - 2 x 24-circuit water manifold - Material hopper - Degassing screw Additional Equipment: - Robot interface Nedpju Awalefx Ag Hslf - 4 x hydraulic core pulls

Būklė: geras (naudotas), Gamybos metai: 1992, Offer 23426 Technical data: - Cutting capacity at 90° round: 420 mm - Cutting capacity at 90° flat: 635 x 290 mm - Cutting capacity at 45° round: 360 mm - Cutting capacity at 45° flat: 420 x 300 mm - Saw blade dimensions: 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds: 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vice - Cutting pressure continuously adjustable: 0 – 10 m/min - Total drive power: 400 V / 2.2 kW Nledpfxorl Irve Ag Hjf - Coolant system - Machine is mounted on a swiveling chassis - Powered infeed roller conveyor: 4000 mm - Outfeed roller conveyor with length stop: 6000 mm - Space requirement: approx. W 2500 x H 1400 x D 1100 mm - Machine weight: approx. 950 kg - Roller conveyor weight: 2000 kg

Gamybos metai: 1981, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can also be processed. The plant has been in operation until now and can be inspected at any time in Nuremberg. The plant consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to a maximum width of 330 mm Calender Total roll width: 1,200 mm Net roll width: 1,100 mm (max. film width) Haul-off unit and flying shear Nledpfxou Ttf Ne Ag Hef