Įpurškimo liejimo mašina

KraussMaffei KM 1300-12000 MC

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TET351P5-offAD-Bypass - 2200373733, vėsinimo galia: 66 kW (89,73 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 1 082 kg, aplinkos temperatūra (maks.): 46 °C, aplinkos temperatūra (min.): −5 °C, įėjimo įtampa: 400 V, slėgis: 6 juosta, temperatūra: 7 °C, tūrio srautas: 11,2 m³/val, siurblio slėgis: 4,68 juosta, bendras plotis: 866 mm, bendras ilgis: 2 250 mm, bendras aukštis: 2 054 mm, garantijos trukmė: 3 mėnesiai, įėjimo dažnis: 50 Hz, Įranga: Tipinė plokštelė prieinama, Process chiller / air-cooled water chiller, Type: TAEevo Tech 351 P5-offAD-Bypass MTA S.p.A. Chiller, Water Chiller; Cooler TAEevo Tech 351 P5-offAD-Bypass are air-cooled, compact water chillers suitable for outdoor installation down to -5°C. Features include crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and built-in P5 high-pressure pump. Special equipment: - Open filling system / integrated tank - Manual bypass valve between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water outlet/inlet temp. (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R410A Electrical Data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Gjdpfxjwlt Ras Acysip Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial number: 2200373733 Year of construction: 2021 Condition: Visually grade 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have visual defects due to usage. (Technical modifications and prior sale reserved!)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we offer one of our pre-owned injection moulding machines for sale here. CONTROL SYSTEM - MC4 TECHNICAL DATA Gisdpfxsnh Rnuo Acyjp CLAMPING UNIT - Clamping force: 5000 kN - Distance between tie bars (h x v): 900 x 800 mm - Maximum mould opening distance: 1170 mm - Minimum mould installation height: 480 mm - Opening stroke of platen: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical parameters - Pump connected load: 90 kW - Heating capacity: 44 kW Weight & Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As standard, we supply this machine in fully functional, basic condition. Additionally, as the original manufacturer, we can provide various options depending on individual requirements, such as: - Energy optimisation upgrades - Possible integration with KraussMaffei digital products - Plasticising unit conversions - Optional: organisation and handling of delivery (not included in the price) - Optional: setup and commissioning (not included in the price) With us, you benefit from first-class service and also have the option to purchase desired spare part packages for wear parts—ensuring seamless production with your newly acquired used machine. Don’t hesitate to get in touch with your enquiry today!

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036940, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, įpurškimo slėgis: 1,892 juosta, injekcijos svoris: 358 g, formos aukštis (min.): 200 mm, išmetimo jėga: 33 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 950 mm, įrengimo aukštis: 500 mm, bendras ilgis: 5 650 mm, bendras plotis: 1 820 mm, bendras aukštis: 1 950 mm, bendras svoris: 9 700 kg, šildymo galia: 15,5 kW (21,07 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 570 mm, įrankio svoris: 600 000 g, Injection molding machines directly from the manufacturer! As the manufacturer KraussMaffei, we are offering you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the ideal entry-level solution for fully electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, user-friendly operation, and short delivery times. It is suitable for a variety of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency through a fully electric machine concept – Fast delivery times thanks to a base machine concept with a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine no.: 61036683, new, year 2013) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functions CLAMPING UNIT • Clamping force kN 1600 • Maximum mold opening force kN 120 • Clear distance (h x v) mm 570 x 520 • Mounting plate size (h x v) mm 770 x 720 • Mold installation height min. - max. mm 200 - 500 • Opening stroke mm 950 • Maximum mold opening travel mm 450 • Ejector drive: electric • Ejector stroke mm 100 • Ejector force fwd/rev kN 33 / 33 • Ejector speed fwd/rev mm/s 300 / 300 • Maximum mold weight kg 1200 INJECTION UNIT • Screw diameter/type mm 50 / standard • Effective L/D ratio 20.2 • Injection pressure bar 1892 • Shot volume cm³ 393 • Shot weight at max. stroke for PS g 358 • Injection speed mm/s 200 • Injection flow rate cm³/s 393 • Screw drive/speed rpm 267 • Plasticizing rate (standard screw)4) g/s 36.5 • Nozzle contact force kN 42 ELECTRICAL PARAMETERS • Connected load kW 31.2 • Installed heating capacity kW 15.5 • Power supply V / Hz 400 / 50, 3-phase with neutral Godpfsugfw Dsx Acysip WEIGHT AND DIMENSIONS • Net weight with control cabinet t 9.7 • Dimensions L x W x H m 5.65 x 1.82 x 1.95 ADDITIONAL FEATURES • Wear-resistant plasticizing system • BluePower full insulation of plasticizing cylinder • Open nozzle • Air valve single (BWAP) • Pneumatic hot runner control, single circuit • Electrical interface for pneumatic cascade, 4-fold • Euromap interface handling E18 + E67 • Euromap interface (central computer) E67, E77 • Water manifold 4-fold • Electrical prep for hydraulic auxiliary unit • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression function • Graphic analysis package • Swiveling device for injection unit The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras available on request. We look forward to your inquiry.

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Giodeh Nypfspfx Acyjp

Būklė: geras (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 191523, spaudimo jėga: 490 kN, varžto skersmuo: 30 mm, -KOM 3086- Gisdpfxov Tb U Dj Acyep Offered here is a used injection moulding machine. Technical specifications: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Clamping force: 50 t Year of manufacture: 2013 Machine No.: 191523 Screw diameter: 30 mm Tie bar spacing: Tie-barless Location ring diameter: 125 mm

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Max. output capacity: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic feed system, frame structure, level valve, inspection chamber, and documentation. Gsdpfx Ash Akm Tscyjip

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The device allows for dosing and mixing of up to four granular components. Actual, measured and weighed quantities are constantly compared with the set values by a modern, microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous automatic optimisation. The complete unit includes: - 2 feed hoppers for virgin material or regranulate/virgin material - 2 feed hoppers for masterbatch or additives - 2 pneumatically operated conical dosing heads Gsdpjwm Ii Tjfx Acysip - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 litres - Weighing hopper – capacity approx. 0.8 litres - Mixing hopper – capacity approx. 3.0 litres - Manually operated slide gate valve GRAVInet controller with colour touchscreen, enabling recipe management, regrind and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing features Technical data: - Average output: 60 kg/h - Main component dosing range: 1–100% - Additive dosing range: 0.5–10% - Power supply: 1/N/PE 230 V 50 Hz - Power consumption: 100 W - Compressed air: 6–8 bar, oil and water-free - Weight: approx. 60 kg ✅ The scope of delivery includes Piovan material loaders, as shown in the photos.

Būklė: visiškai atnaujintas (naudotas), veikimo valandos: 786 h, Funkcionalumas: visiškai funkcionalus, Kärcher KM 90/60 Bp Pack buvo visiškai atnaujinta mūsų įmonėje. Visi komponentai buvo patikrinti dėl funkcionalumo ir išvalyti. Įrengta nauja pagrindinė šlavimo šepetys, naujas šoninis šepetys ir naujas filtras. Sumontuotos keturios naudotos baterijos, tačiau už papildomą mokestį galima įdiegti naujas, nereikalaujančias priežiūros gelines baterijas. Baterijos patogiai įkraunamos per integruotą įkroviklį. Mašina puikiai tinka vidutinio dydžio plotams, tokiems kaip automobilių stovėjimo aikštelės ar sandėliai. Techniniai duomenys: Darbinis plotis su vienu šoniniu šepečiu: 900 mm Valymo našumas: 5400 m²/val Šiukšlių talpos tūrįs: 60 litrų Įkalnės įveikimas: 12 laipsnių Gijdpfx Ajxghbmscysp Svoris: 355 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 23 170 h, spaudimo jėga: 2 500 kN, varžto skersmuo: 60 mm, įpurškimo slėgis: 2 005 juosta, injekcijos svoris: 618 g, formos aukštis (min.): 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article Number: 225 Availability: In stock Year of Manufacture: 2016 Brand: KRAUSS MAFFEI Technical Data Injection Weight: 618 g Injection Rate: 848 cm³/s Clamping Force: 2,500 kN Screw Diameter: 60 mm Injection Pressure: 2,005 bar Tie Bar Distance: 630x630 mm Platen Size: 1135x1180 mm Minimum Mold Height: 330 mm Maximum Platen Opening: 1,150 mm Control System: MC6 Language: German Power: 70 kW Operating Hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Godpfx Aovtzkfecyoip Hopper: No Core Pull: Yes Euromap Interface: Yes Air Valve: Yes Heated Channels: Yes Gas Accumulator: Yes