Liejimo mašina

KraussMaffei 300-1400 C2

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 6 200 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 200 kN, varžto skersmuo: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons of clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control system. Screw diameter: 75 mm. Extras: 8 hot runner zones. 2 cores on the fixed platen, 2 cores on the moving platen. 1 pneumatic valve on the moving platen. The injection molding machine is delivered RE-Conditioned by the UK Transitus expert technical team. Commissioning at the customer's site can be offered, ensuring proper operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR INJECTION VOLUME: 1237 cm³ Hjdpfx Aswq D Efshgsp INJECTION WEIGHT: 1126 g MAX. DISTANCE BETWEEN PLATENS: 1400 mm MINIMUM MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm DISTANCE BETWEEN TIE BARS: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6282

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2010, Wittmann W853 linijinis Z=4000 mm, naudingoji apkrova: 41,5 kg Ašių skaičius: 3 X: 1500 mm Y: 2600 mm Z: 4000 mm + pneumatinė C ašis Darbo diapazonas: 4000 mm Naudingoji apkrova: 41 kg Hodpfx Aswnfmfehgjp Robotas turi NAUJĄ procesorių ir naujus akumuliatorius, ir jis buvo išsamiai patikrintas Wittmann techniko mūsų parodų salėje.

Būklė: naudotas, Gamybos metai: 2001, Clamping force: 350 t Platen dimensions: 1040 x 950 mm Tie bar spacing: 710 x 630 mm Screw diameter: 50 mm Hodpeva Ht Sofx Ahgjp Shot weight: 400 g Shot volume: 442 cm³ Design: Horizontal Drive: Hydraulic

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Model: KM180-750 AX All Electric Year of manufacture: 2011 Clamping unit Clamping force: 180 tons Opening stroke: 1050 mm Tie bar spacing (H x V): 560 × 510 mm Min. mold height: 200 mm Max. mold height: 600 mm Platen size (H x V): 790 × 740 mm Injection unit Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight PS: 357 g Injection pressure: 1892 bar Dimensions and weights Dimensions LxWxH: 6.07 x 1.92 x 2.01 m Machine weight: 6500 kg Additional information: 👉 Fully electric machine offering maximum precision, minimal energy consumption, and highest process stability. This machine is part of the proven AX series from KraussMaffei, renowned for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial products. Hedpfx Ahow E E Evjgop Key features: * Solid and durable construction for long-term use * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial operation * Good spare parts availability The machine is equipped with a KraussMaffei linear robot (LRX-S100), enabling efficient and automated part removal, thereby increasing productivity and reducing cycle times. Thanks to its balanced performance and flexibility, this machine offers a very attractive solution for both technical component manufacturing and series production. The machine was manufactured in 2011 and, as shown in the pictures, is in good and fully functional condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Linijinis robotas / paėmimo robotas SEPRO S5-25 med Gamintojas: SEPRO Robotique S.A.S. Modelis: S5-25 med Staklių tipas: linijinis robotas / paėmimo robotas – šiuo metu naudojamas su liejimo mašina, tačiau gali būti naudojamas ir kaip savarankiškas įrenginys kitoms reikmėms Pagaminimo metai: 2024 Maksimali galia: 1,5 kVA Svoris: 100 kg Įtampa: 3×400 V iki 3×480 V ±10 % Dažnis: 50/60 Hz Atsparumas trumpo jungimo srovei: 10 kA Automatizavimo sistemos gamintojas: SEPRO Robotique GmbH CE ženklinimas: yra Hodpsytnxgjfx Ahgep Vieta: Freiburgas

Būklė: geras (naudotas), Gamybos metai: 1999, spaudimo jėga: 2 000 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 200-700 C2 Mašinos Nr.: 174406 Tarptautinis dydžio žymėjimas: 700 C2 / 200 Hsdpfjytiqwsx Ahgsp Metai: 1999 Uždarymo jėga: 2000 kN Uždarymo jėga: 200 t Įpurškimo agregato dydis: 700 Mašinos svoris: 8800 kg Vieta: Freiburgas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 350-2700 C2+ Injection Moulding Machine Year of manufacture: 2004 System: Fully hydraulic Control system: MC4, colour monitor, integrated control panel, built-in disk drive 2. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasive protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould height installation: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Hodpfxjx Eluks Ahgop Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard speed: 108 g/s Output at increased speed: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Būklė: naudotas, Gamybos metai: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140000 operating hours. The machine can be inspected in operation by appointment. Availability: 06/2026 Important: The information on this page has been obtained to the best of our knowledge and belief. This information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute a contractual term. We recommend that you verify all essential details during an inspection of the machine. To help our customers avoid unnecessary travel expenses, we recommend, in most cases, organising a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar distance: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Overall length: 13,184 mm Overall width: 3,175 mm Hedpfjyq Dqgex Ahgep Overall height: 2,925 mm Max. pressure ($P_{max}$): 190 bar Max. flow rate ($Q_{max}$): 486 l/min System current: 409 A Heating current: 154 A

Gamybos metai: 2008, veikimo valandos: 3 200 h, būklė: paruoštas naudoti (naudotas), varžto skersmuo: 60 mm, Šis 5 ašių "Krauss Maffei KM 200 CX 1400 MC5" buvo pagamintas 2008 m. Jo prispaudimo jėga 200 tonų, kurią galima išplėsti iki 300 tonų, o sraigto skersmuo - 60 mm. Mašinoje yra hidraulinis ežektorius, šoninis oro vožtuvas, roboto sąsaja ir 4 zonų formos temperatūros kontrolės sistema. Jei ieškote aukštos kokybės liejimo liejimo galimybių, apsvarstykite mūsų parduodamą "Krauss Maffei KM 200 CX 1400 MC5" mašiną. Susisiekite su mumis ir gaukite daugiau informacijos. Papildoma įranga • Hidraulinis išmetiklis • Šoninis oro vožtuvas Hodpfxsyaizvo Ahgop • Roboto sąsaja • 4 zonų pelėsių temperatūros kontrolės sistema Mašinos privalumai Techninės mašinos privalumai • Tarpas tarp jungiamųjų strypų: 560 x 560 mm Papildoma informacija Mašina vis dar įjungta

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight opening: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Hodpfxsyv E Nve Ahgsp Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection throughput: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising System: - Version for thermoplastics with abrasion protection - Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is a very good candidate for ESS retrofit (energy savings up to 30–60%) 📐 Dimensions and weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m