2024 KRAUS MAFFEI KM PA 250/1400 PA G01

KRAUS MAFFEI KM PA 250/1400 PA G01

Sąlyga: naudotas, Gamybos metai: 2008, spaudimo jėga: 160 kN, darbinio tūrio: 251 cm³, įpurškimo slėgis: 2 500 juosta, bendras svoris: 8 200 kg, darbo valandos: 37 200 h, sraigtinio konvejerio skersmuo: 40 mm, Pristatymo sąlygos: FCA Pegnitz Iodpfewd Udlex Af Ioht Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 17 000 h, spaudimo jėga: 220 kN, varžto skersmuo: 50 mm, Year: 2018 Control type: CC300 Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 220 T Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Min./max. mould height: 250 / 600 mm Max. distance between platens: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20D Volume: 432 cm³ Injection pressure: 2,002 bar Motor power: 29 kW Ihedpfovtm Uisx Af Ist Heating power: 15.3 kW Clamping unit weight: 11.3 T Length: 6.30 m Width: 1.80 m Height: 2.10 m Core pull: NO Robot interface: YES Bi-metallic screw: YES

Sąlyga: naujas, mašinos/transporto priemonės numeris: Baureihe GSL 300 / Neumaschine, The granulators of the GSL Series 300/400 up to 300/800 are primarily designed for the size reduction of production scrap in injection molding and blow molding applications. In addition to the key advantages of the GSL series, the slow-speed granulators GSL 300/400, GSL 300/600, and GSL 300/800 are particularly suitable for processing large-surface components, such as automotive door panels, bumpers, or hollow bodies. Due to the ‘V arrangement’ of the rotor knives, the pre-shredded material is held in the rotor center. This significantly reduces wear on the grinding chamber walls when processing glass fiber-reinforced plastics. Material build-up on the side walls is avoided. With the staggered arrangement of the rotor discs, only one knife is in operation at a time, providing consistently higher cutting force. Iedeghgbhepfx Af Isht

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors Ihsdpfx Afjwu Tu De Ijt - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: naudotas, Gamybos metai: 2019, Year: 2017 Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Platen dimensions: 760 mm x 760 mm Minimum/maximum mould height: 250/600 mm Maximum daylight between platens: 1,060 mm Screw diameter: 35 mm Screw length: 20D Shot volume: 154 cm³ Injection pressure: 2,000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Overall length: 5.90 m Overall width: 1.70 m Overall height: 2.20 m Core pull: NO Robot interface: YES Bimetallic screw: YES Ihedpfxov I Uw Io Af Ijt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 23 170 h, spaudimo jėga: 2 500 kN, varžto skersmuo: 60 mm, įpurškimo slėgis: 2 005 juosta, injekcijos svoris: 618 g, formos aukštis (min.): 330 mm, Injection Moulding Machine Krauss Maffei 250-1400CX with Robot and Gas-Boost (225) Article Number: 225 Availability: In stock Year of Manufacture: 2016 Brand: KRAUSS MAFFEI Technical Data Injection Weight: 618 g Injection Rate: 848 cm³/s Clamping Force: 2,500 kN Screw Diameter: 60 mm Injection Pressure: 2,005 bar Tie Bar Distance: 630x630 mm Platen Size: 1135x1180 mm Minimum Mold Height: 330 mm Maximum Platen Opening: 1,150 mm Control System: MC6 Language: German Power: 70 kW Operating Hours: 23,170 h Weight: 15,000 kg Dimensions: 6.5x2.3x2.3 m Hopper: No Core Pull: Yes Euromap Interface: Yes Air Valve: Yes Iodpfxevtzkfe Af Ijht Heated Channels: Yes Gas Accumulator: Yes

Sąlyga: geras (naudotas), Gamybos metai: 2006,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, spaudimo jėga: 220 kN, varžto skersmuo: 55 mm, Year: 2013 Control type: CC300 Operating hours: 35,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Clamping force: 220 T Opening stroke: 600 mm Tie bar spacing: 650 mm x 650 mm Platen dimensions: 970 mm x 970 mm Mould height (min/max): 250/600 mm Maximum daylight: 1,200 mm Screw diameter: 55 mm Screw length: 20D Shot volume: 677 cm³ Max. injection pressure: 2,003 bar Drive power: 81 kW Heating power: 19.8 kW Clamping unit weight: 16 T Length: 7.10 m Width: 2.00 m Ihodevtm Ipspfx Af Ijt Height: 2.50 m Cores: NO Robot interface: YES Bi-metallic screw: YES

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, veikimo valandos: 12 188 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 233832, spaudimo jėga: 1 200 kN, varžto skersmuo: 40 mm, formos aukštis (min.): 300 mm, išstūmimo eiga: 130 mm, atvērimo eiga: 507 mm, plokštės ilgis: 680 mm, plokštės plotis: 740 mm, bendras ilgis: 4 854 mm, bendras plotis: 1 508 mm, bendras aukštis: 2 503 mm, bendras svoris: 6 800 kg, slėgis: 1 300 juosta, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Parduodama ENGEL VICTORY 500/120 SPEX liejimo mašina labai geros būklės. Mašina naudota vienetinėje gamyboje, reguliariai prižiūrėta ir iš karto paruošta darbui. Techniniai duomenys: Iodpfx Aoxmu N Dof Ioht Pagaminimo metai: 2019 Darbo valandos: 12 188 h Uždarymo jėga: 120 tonų Konstrukcija: be stulpelių (tie-barless) Tvirtinimo plokštė su centrinio gręžimo anga Ø125 mm Centrinis išstūmėjas 12 šildymo zonų (Euromap 14) – iki 22 kW bendra galia Stumdomas bunkerio pagrindas Bimetalinė cilindras Sraigtas S8, GPS (G1), Ø40 mm, L/D 20 Grįžtamosios vožtuvas UNR9 (R9B) Keraminiai šildytuvai Hidraulinis paketas ECODRIVE – SHV1 Valdymo sistema CC300 (kalbos: PL/EN) Ecograph, IQ svorio monitorius Maitinimas: 3x400V + N + PE / 50Hz Keturgubas rotametras Bekontakčiai padėties davikliai 4 skaitmeniniai įėjimai / 4 programuojami skaitmeniniai išėjimai Piovan S52 tiekėjas (150 kg/h) Svoris: 6 800 kg Būklė: labai gera, iš karto galima naudoti ir išbandyti. Vieta: Hajnowka, Podlaskie, Lenkija.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, bendras svoris: 540 kg, tūrio srautas: 310,8 m³/val, slėgis (maks.): 8,5 juosta, Įranga: Tipinė plokštelė prieinama, PROD.: ATLAS COPCO MODEL: GA30 S/N: API324380 Ihjdpfxjqfd U Io Af Ist YEAR: 2013 POWER (kW): 30 CAPACITY (m³/min): 5.18 OPERATING PRESSURE (bar): 8.5